54aa9d51b0
Mingw config targets assumed that resulting programs and libraries are installed in a Unix-like environment and the default installation prefix was therefore set to '/usr/local'. However, mingw programs are installed in a Windows environment, and the installation directories should therefore have Windows defaults, i.e. the same kind of defaults as the VC config targets. A difficulty is, however, that a "cross compiled" build can't figure out the system defaults from environment the same way it's done when building "natively", so we have to fall back to hard coded defaults in that case. Tests can still be performed when cross compiled on a non-Windows platform, since all tests only depend on the source and build directory, and otherwise relies on normal local paths. CVE-2019-1552 Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/9400)
1806 lines
78 KiB
Perl
1806 lines
78 KiB
Perl
## -*- mode: perl; -*-
|
|
## Standard openssl configuration targets.
|
|
|
|
# Helper functions for the Windows configs
|
|
my $vc_win64a_info = {};
|
|
sub vc_win64a_info {
|
|
unless (%$vc_win64a_info) {
|
|
if (`nasm -v 2>NUL` =~ /NASM version ([0-9]+\.[0-9]+)/ && $1 >= 2.0) {
|
|
$vc_win64a_info = { AS => "nasm",
|
|
ASFLAGS => "-g",
|
|
asflags => "-Ox -f win64 -DNEAR",
|
|
asoutflag => "-o " };
|
|
} elsif ($disabled{asm}) {
|
|
# assembler is still used to compile uplink shim
|
|
$vc_win64a_info = { AS => "ml64",
|
|
ASFLAGS => "/nologo /Zi",
|
|
asflags => "/c /Cp /Cx",
|
|
asoutflag => "/Fo" };
|
|
} else {
|
|
$die->("NASM not found - make sure it's installed and available on %PATH%\n");
|
|
$vc_win64a_info = { AS => "{unknown}",
|
|
ASFLAGS => "",
|
|
asflags => "",
|
|
asoutflag => "" };
|
|
}
|
|
}
|
|
return $vc_win64a_info;
|
|
}
|
|
|
|
my $vc_win32_info = {};
|
|
sub vc_win32_info {
|
|
unless (%$vc_win32_info) {
|
|
my $ver=`nasm -v 2>NUL`;
|
|
my $vew=`nasmw -v 2>NUL`;
|
|
if ($ver ne "" || $vew ne "") {
|
|
$vc_win32_info = { AS => $ver ge $vew ? "nasm" : "nasmw",
|
|
ASFLAGS => "",
|
|
asflags => "-f win32",
|
|
asoutflag => "-o ",
|
|
perlasm_scheme => "win32n" };
|
|
} elsif ($disabled{asm}) {
|
|
# not actually used, uplink shim is inlined into C code
|
|
$vc_win32_info = { AS => "ml",
|
|
ASFLAGS => "/nologo /Zi",
|
|
asflags => "/Cp /coff /c /Cx",
|
|
asoutflag => "/Fo",
|
|
perlasm_scheme => "win32" };
|
|
} else {
|
|
$die->("NASM not found - make sure it's installed and available on %PATH%\n");
|
|
$vc_win32_info = { AS => "{unknown}",
|
|
ASFLAGS => "",
|
|
asflags => "",
|
|
asoutflag => "",
|
|
perlasm_scheme => "win32" };
|
|
}
|
|
}
|
|
return $vc_win32_info;
|
|
}
|
|
|
|
my $vc_wince_info = {};
|
|
sub vc_wince_info {
|
|
unless (%$vc_wince_info) {
|
|
# sanity check
|
|
$die->('%OSVERSION% is not defined') if (!defined(env('OSVERSION')));
|
|
$die->('%PLATFORM% is not defined') if (!defined(env('PLATFORM')));
|
|
$die->('%TARGETCPU% is not defined') if (!defined(env('TARGETCPU')));
|
|
|
|
#
|
|
# Idea behind this is to mimic flags set by eVC++ IDE...
|
|
#
|
|
my $wcevers = env('OSVERSION'); # WCENNN
|
|
my $wcevernum;
|
|
my $wceverdotnum;
|
|
if ($wcevers =~ /^WCE([1-9])([0-9]{2})$/) {
|
|
$wcevernum = "$1$2";
|
|
$wceverdotnum = "$1.$2";
|
|
} else {
|
|
$die->('%OSVERSION% value is insane');
|
|
$wcevernum = "{unknown}";
|
|
$wceverdotnum = "{unknown}";
|
|
}
|
|
my $wcecdefs = "-D_WIN32_WCE=$wcevernum -DUNDER_CE=$wcevernum"; # -D_WIN32_WCE=NNN
|
|
my $wcelflag = "/subsystem:windowsce,$wceverdotnum"; # ...,N.NN
|
|
|
|
my $wceplatf = env('PLATFORM');
|
|
|
|
$wceplatf =~ tr/a-z0-9 /A-Z0-9_/;
|
|
$wcecdefs .= " -DWCE_PLATFORM_$wceplatf";
|
|
|
|
my $wcetgt = env('TARGETCPU'); # just shorter name...
|
|
SWITCH: for($wcetgt) {
|
|
/^X86/ && do { $wcecdefs.=" -Dx86 -D_X86_ -D_i386_ -Di_386_";
|
|
$wcelflag.=" /machine:X86"; last; };
|
|
/^ARMV4[IT]/ && do { $wcecdefs.=" -DARM -D_ARM_ -D$wcetgt";
|
|
$wcecdefs.=" -DTHUMB -D_THUMB_" if($wcetgt=~/T$/);
|
|
$wcecdefs.=" -QRarch4T -QRinterwork-return";
|
|
$wcelflag.=" /machine:THUMB"; last; };
|
|
/^ARM/ && do { $wcecdefs.=" -DARM -D_ARM_ -D$wcetgt";
|
|
$wcelflag.=" /machine:ARM"; last; };
|
|
/^MIPSIV/ && do { $wcecdefs.=" -DMIPS -D_MIPS_ -DR4000 -D$wcetgt";
|
|
$wcecdefs.=" -D_MIPS64 -QMmips4 -QMn32";
|
|
$wcelflag.=" /machine:MIPSFPU"; last; };
|
|
/^MIPS16/ && do { $wcecdefs.=" -DMIPS -D_MIPS_ -DR4000 -D$wcetgt";
|
|
$wcecdefs.=" -DMIPSII -QMmips16";
|
|
$wcelflag.=" /machine:MIPS16"; last; };
|
|
/^MIPSII/ && do { $wcecdefs.=" -DMIPS -D_MIPS_ -DR4000 -D$wcetgt";
|
|
$wcecdefs.=" -QMmips2";
|
|
$wcelflag.=" /machine:MIPS"; last; };
|
|
/^R4[0-9]{3}/ && do { $wcecdefs.=" -DMIPS -D_MIPS_ -DR4000";
|
|
$wcelflag.=" /machine:MIPS"; last; };
|
|
/^SH[0-9]/ && do { $wcecdefs.=" -D$wcetgt -D_${wcetgt}_ -DSHx";
|
|
$wcecdefs.=" -Qsh4" if ($wcetgt =~ /^SH4/);
|
|
$wcelflag.=" /machine:$wcetgt"; last; };
|
|
{ $wcecdefs.=" -D$wcetgt -D_${wcetgt}_";
|
|
$wcelflag.=" /machine:$wcetgt"; last; };
|
|
}
|
|
|
|
$vc_wince_info = { cppflags => $wcecdefs,
|
|
lflags => $wcelflag };
|
|
}
|
|
return $vc_wince_info;
|
|
}
|
|
|
|
# Helper functions for the VMS configs
|
|
my $vms_info = {};
|
|
sub vms_info {
|
|
my $pointer_size_str = $config{target} =~ m|-p(\d+)$| ? $1 : "";
|
|
|
|
# For the case where Configure iterate through all config targets, such
|
|
# as when listing them and their details, we reset info if the pointer
|
|
# size changes.
|
|
if (%$vms_info && $vms_info->{pointer_size} ne $pointer_size_str) {
|
|
$vms_info = {};
|
|
}
|
|
|
|
unless (%$vms_info) {
|
|
$vms_info->{disable_warns} = [ ];
|
|
$vms_info->{pointer_size} = $pointer_size_str;
|
|
if ($pointer_size_str eq "64") {
|
|
`PIPE CC /NOCROSS_REFERENCE /NOLIST /NOOBJECT /WARNINGS = DISABLE = ( MAYLOSEDATA3, EMPTYFILE ) NL: 2> NL:`;
|
|
if ($? == 0) {
|
|
push @{$vms_info->{disable_warns}}, "MAYLOSEDATA3";
|
|
}
|
|
}
|
|
|
|
unless ($disabled{zlib}) {
|
|
my $default_zlib = 'GNV$LIBZSHR' . $pointer_size_str;
|
|
if (defined($disabled{"zlib-dynamic"})) {
|
|
$vms_info->{zlib} = $withargs{zlib_lib} || "$default_zlib/SHARE";
|
|
} else {
|
|
$vms_info->{def_zlib} = $withargs{zlib_lib} || $default_zlib;
|
|
# In case the --with-zlib-lib value contains something like
|
|
# /SHARE or /LIB or so at the end, remove it.
|
|
$vms_info->{def_zlib} =~ s|/.*$||g;
|
|
}
|
|
}
|
|
|
|
if ($config{target} =~ /-ia64/) {
|
|
`PIPE ias -H 2> NL:`;
|
|
if ($? == 0) {
|
|
$vms_info->{AS} = "ias";
|
|
$vms_info->{ASFLAGS} = '-d debug';
|
|
$vms_info->{asflags} = '"-N" vms_upcase';
|
|
$vms_info->{asoutflag} = "-o ";
|
|
$vms_info->{perlasm_scheme} = "ias";
|
|
}
|
|
}
|
|
}
|
|
return $vms_info;
|
|
}
|
|
|
|
my %targets = (
|
|
|
|
#### Basic configs that should work on any 32-bit box
|
|
"gcc" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "gcc",
|
|
CFLAGS => picker(debug => "-O0 -g",
|
|
release => "-O3"),
|
|
thread_scheme => "(unknown)",
|
|
bn_ops => "BN_LLONG",
|
|
},
|
|
"cc" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "cc",
|
|
CFLAGS => "-O",
|
|
thread_scheme => "(unknown)",
|
|
},
|
|
|
|
#### VOS Configurations
|
|
"vos-gcc" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "gcc",
|
|
CFLAGS => picker(default => "-Wall",
|
|
debug => "-O0 -g",
|
|
release => "-O3"),
|
|
cppflags => "-D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES",
|
|
lib_cppflags => "-DB_ENDIAN",
|
|
thread_scheme => "(unknown)",
|
|
sys_id => "VOS",
|
|
lflags => add("-Wl,-map"),
|
|
bn_ops => "BN_LLONG",
|
|
shared_extension => ".so",
|
|
},
|
|
|
|
#### Solaris configurations
|
|
"solaris-common" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
template => 1,
|
|
lib_cppflags => "-DFILIO_H",
|
|
ex_libs => add("-lsocket -lnsl -ldl"),
|
|
dso_scheme => "dlfcn",
|
|
thread_scheme => "pthreads",
|
|
shared_target => "self",
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
shared_ldflag => "-Wl,-Bsymbolic",
|
|
shared_defflag => "-Wl,-M,",
|
|
shared_sonameflag=> "-Wl,-h,",
|
|
},
|
|
#### Solaris x86 with GNU C setups
|
|
"solaris-x86-gcc" => {
|
|
# NB. GNU C has to be configured to use GNU assembler, and not
|
|
# /usr/ccs/bin/as. Failure to comply will result in compile
|
|
# failures [at least] in 32-bit build.
|
|
inherit_from => [ "solaris-common", asm("x86_elf_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => add_before(picker(default => "-Wall",
|
|
debug => "-O0 -g",
|
|
release => "-O3 -fomit-frame-pointer")),
|
|
cflags => add(threads("-pthread")),
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
ex_libs => add(threads("-pthread")),
|
|
bn_ops => "BN_LLONG",
|
|
shared_cflag => "-fPIC",
|
|
shared_ldflag => add_before("-shared -static-libgcc"),
|
|
},
|
|
"solaris64-x86_64-gcc" => {
|
|
# -shared -static-libgcc might appear controversial, but modules
|
|
# taken from static libgcc do not have relocations and linking
|
|
# them into our shared objects doesn't have any negative side
|
|
# effects. On the contrary, doing so makes it possible to use
|
|
# gcc shared build with Sun C. Given that gcc generates faster
|
|
# code [thanks to inline assembler], I would actually recommend
|
|
# to consider using gcc shared build even with vendor compiler:-)
|
|
# -- <appro@openssl.org>
|
|
inherit_from => [ "solaris-common", asm("x86_64_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => add_before(picker(default => "-Wall",
|
|
debug => "-O0 -g",
|
|
release => "-O3")),
|
|
cflags => add_before("-m64", threads("-pthread")),
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
ex_libs => add(threads("-pthread")),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
perlasm_scheme => "elf",
|
|
shared_cflag => "-fPIC",
|
|
shared_ldflag => add_before("-shared -static-libgcc"),
|
|
multilib => "/64",
|
|
},
|
|
|
|
#### Solaris x86 with Sun C setups
|
|
# There used to be solaris-x86-cc target, but it was removed,
|
|
# primarily because vendor assembler can't assemble our modules
|
|
# with -KPIC flag. As result it, assembly support, was not even
|
|
# available as option. But its lack means lack of side-channel
|
|
# resistant code, which is incompatible with security by todays
|
|
# standards. Fortunately gcc is readily available prepackaged
|
|
# option, which we can firmly point at...
|
|
#
|
|
# On related note, solaris64-x86_64-cc target won't compile code
|
|
# paths utilizing AVX and post-Haswell instruction extensions.
|
|
# Consider switching to solaris64-x86_64-gcc even here...
|
|
#
|
|
"solaris64-x86_64-cc" => {
|
|
inherit_from => [ "solaris-common", asm("x86_64_asm") ],
|
|
CC => "cc",
|
|
CFLAGS => add_before(picker(debug => "-g",
|
|
release => "-xO5 -xdepend -xbuiltin")),
|
|
cflags => add_before("-xarch=generic64 -xstrconst -Xa"),
|
|
cppflags => add(threads("-D_REENTRANT")),
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
thread_scheme => "pthreads",
|
|
lflags => add(threads("-mt")),
|
|
ex_libs => add(threads("-lpthread")),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
perlasm_scheme => "elf",
|
|
shared_cflag => "-KPIC",
|
|
shared_ldflag => add_before("-G -dy -z text"),
|
|
multilib => "/64",
|
|
},
|
|
|
|
#### SPARC Solaris with GNU C setups
|
|
"solaris-sparcv7-gcc" => {
|
|
inherit_from => [ "solaris-common" ],
|
|
CC => "gcc",
|
|
CFLAGS => add_before(picker(default => "-Wall",
|
|
debug => "-O0 -g",
|
|
release => "-O3")),
|
|
cflags => add(threads("-pthread")),
|
|
lib_cppflags => add("-DB_ENDIAN -DBN_DIV2W"),
|
|
ex_libs => add(threads("-pthread")),
|
|
bn_ops => "BN_LLONG RC4_CHAR",
|
|
shared_cflag => "-fPIC",
|
|
shared_ldflag => add_before("-shared"),
|
|
},
|
|
"solaris-sparcv8-gcc" => {
|
|
inherit_from => [ "solaris-sparcv7-gcc", asm("sparcv8_asm") ],
|
|
cflags => add_before("-mcpu=v8"),
|
|
},
|
|
"solaris-sparcv9-gcc" => {
|
|
# -m32 should be safe to add as long as driver recognizes
|
|
# -mcpu=ultrasparc
|
|
inherit_from => [ "solaris-sparcv7-gcc", asm("sparcv9_asm") ],
|
|
cflags => add_before("-m32 -mcpu=ultrasparc"),
|
|
},
|
|
"solaris64-sparcv9-gcc" => {
|
|
inherit_from => [ "solaris-sparcv9-gcc" ],
|
|
cflags => sub { my $f=join(" ",@_); $f =~ s/\-m32/-m64/; $f; },
|
|
bn_ops => "BN_LLONG RC4_CHAR",
|
|
multilib => "/64",
|
|
},
|
|
|
|
#### SPARC Solaris with Sun C setups
|
|
# SC4.0 doesn't pass 'make test', upgrade to SC5.0 or SC4.2.
|
|
# SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8
|
|
# SC5.0 note: Compiler common patch 107357-01 or later is required!
|
|
"solaris-sparcv7-cc" => {
|
|
inherit_from => [ "solaris-common" ],
|
|
CC => "cc",
|
|
CFLAGS => add_before(picker(debug => "-g",
|
|
release => "-xO5 -xdepend")),
|
|
cflags => add_before("-xstrconst -Xa"),
|
|
cppflags => add(threads("-D_REENTRANT")),
|
|
lib_cppflags => add("-DB_ENDIAN -DBN_DIV2W"),
|
|
lflags => add(threads("-mt")),
|
|
ex_libs => add(threads("-lpthread")),
|
|
bn_ops => "BN_LLONG RC4_CHAR",
|
|
shared_cflag => "-KPIC",
|
|
shared_ldflag => add_before("-G -dy -z text"),
|
|
},
|
|
####
|
|
"solaris-sparcv8-cc" => {
|
|
inherit_from => [ "solaris-sparcv7-cc", asm("sparcv8_asm") ],
|
|
cflags => add_before("-xarch=v8"),
|
|
},
|
|
"solaris-sparcv9-cc" => {
|
|
inherit_from => [ "solaris-sparcv7-cc", asm("sparcv9_asm") ],
|
|
cflags => add_before("-xarch=v8plus"),
|
|
},
|
|
"solaris64-sparcv9-cc" => {
|
|
inherit_from => [ "solaris-sparcv7-cc", asm("sparcv9_asm") ],
|
|
cflags => add_before("-xarch=v9"),
|
|
bn_ops => "BN_LLONG RC4_CHAR",
|
|
multilib => "/64",
|
|
},
|
|
|
|
#### IRIX 6.x configs
|
|
# Only N32 and N64 ABIs are supported.
|
|
"irix-common" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
template => 1,
|
|
cppflags => threads("-D_SGI_MP_SOURCE"),
|
|
lib_cppflags => "-DB_ENDIAN",
|
|
ex_libs => add(threads("-lpthread")),
|
|
thread_scheme => "pthreads",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "self",
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
shared_ldflag => "-shared -Wl,-Bsymbolic",
|
|
shared_sonameflag=> "-Wl,-soname,",
|
|
},
|
|
"irix-mips3-gcc" => {
|
|
inherit_from => [ "irix-common", asm("mips64_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => picker(debug => "-g -O0",
|
|
release => "-O3"),
|
|
LDFLAGS => "-static-libgcc",
|
|
cflags => "-mabi=n32",
|
|
bn_ops => "RC4_CHAR SIXTY_FOUR_BIT",
|
|
perlasm_scheme => "n32",
|
|
multilib => "32",
|
|
},
|
|
"irix-mips3-cc" => {
|
|
inherit_from => [ "irix-common", asm("mips64_asm") ],
|
|
CC => "cc",
|
|
CFLAGS => picker(debug => "-g -O0",
|
|
release => "-O2"),
|
|
cflags => "-n32 -mips3 -use_readonly_const -G0 -rdata_shared",
|
|
bn_ops => "RC4_CHAR SIXTY_FOUR_BIT",
|
|
perlasm_scheme => "n32",
|
|
multilib => "32",
|
|
},
|
|
# N64 ABI builds.
|
|
"irix64-mips4-gcc" => {
|
|
inherit_from => [ "irix-common", asm("mips64_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => picker(debug => "-g -O0",
|
|
release => "-O3"),
|
|
LDFLAGS => "-static-libgcc",
|
|
cflags => "-mabi=64 -mips4",
|
|
bn_ops => "RC4_CHAR SIXTY_FOUR_BIT_LONG",
|
|
perlasm_scheme => "64",
|
|
multilib => "64",
|
|
},
|
|
"irix64-mips4-cc" => {
|
|
inherit_from => [ "irix-common", asm("mips64_asm") ],
|
|
CC => "cc",
|
|
CFLAGS => picker(debug => "-g -O0",
|
|
release => "-O2"),
|
|
cflags => "-64 -mips4 -use_readonly_const -G0 -rdata_shared",
|
|
bn_ops => "RC4_CHAR SIXTY_FOUR_BIT_LONG",
|
|
perlasm_scheme => "64",
|
|
multilib => "64",
|
|
},
|
|
|
|
#### Unified HP-UX ANSI C configs.
|
|
# Special notes:
|
|
# - Originally we were optimizing at +O4 level. It should be noted
|
|
# that the only difference between +O3 and +O4 is global inter-
|
|
# procedural analysis. As it has to be performed during the link
|
|
# stage the compiler leaves behind certain pseudo-code in lib*.a
|
|
# which might be release or even patch level specific. Generating
|
|
# the machine code for and analyzing the *whole* program appears
|
|
# to be *extremely* memory demanding while the performance gain is
|
|
# actually questionable. The situation is intensified by the default
|
|
# HP-UX data set size limit (infamous 'maxdsiz' tunable) of 64MB
|
|
# which is way too low for +O4. In other words, doesn't +O3 make
|
|
# more sense?
|
|
# - Keep in mind that the HP compiler by default generates code
|
|
# suitable for execution on the host you're currently compiling at.
|
|
# If the toolkit is meant to be used on various PA-RISC processors
|
|
# consider './Configure hpux-parisc-[g]cc +DAportable'.
|
|
# - -DMD32_XARRAY triggers workaround for compiler bug we ran into in
|
|
# 32-bit message digests. (For the moment of this writing) HP C
|
|
# doesn't seem to "digest" too many local variables (they make "him"
|
|
# chew forever:-). For more details look-up MD32_XARRAY comment in
|
|
# crypto/sha/sha_lcl.h.
|
|
# - originally there were 32-bit hpux-parisc2-* targets. They were
|
|
# scrapped, because a) they were not interchangeable with other 32-bit
|
|
# targets; b) performance-critical 32-bit assembly modules implement
|
|
# even PA-RISC 2.0-specific code paths, which are chosen at run-time,
|
|
# thus adequate performance is provided even with PA-RISC 1.1 build.
|
|
"hpux-common" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
template => 1,
|
|
defines => add("_XOPEN_SOURCE", "_XOPEN_SOURCE_EXTENDED",
|
|
"_HPUX_ALT_XOPEN_SOCKET_API"),
|
|
lib_cppflags => "-DB_ENDIAN",
|
|
thread_scheme => "pthreads",
|
|
dso_scheme => "dlfcn", # overridden in 32-bit PA-RISC builds
|
|
shared_target => "self",
|
|
bin_lflags => "-Wl,+s,+cdp,../:,+cdp,./:",
|
|
shared_ldflag => "-Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+cdp,../:,+cdp,./:",
|
|
shared_sonameflag=> "-Wl,+h,",
|
|
},
|
|
"hpux-parisc-gcc" => {
|
|
inherit_from => [ "hpux-common" ],
|
|
CC => "gcc",
|
|
CFLAGS => picker(debug => "-O0 -g",
|
|
release => "-O3"),
|
|
cflags => add(threads("-pthread")),
|
|
lib_cppflags => add("-DBN_DIV2W"),
|
|
ex_libs => add("-ldld", threads("-pthread")),
|
|
bn_ops => "BN_LLONG RC4_CHAR",
|
|
dso_scheme => "dl",
|
|
shared_cflag => "-fPIC",
|
|
shared_ldflag => add_before("-shared"),
|
|
shared_extension => ".sl.\$(SHLIB_VERSION_NUMBER)",
|
|
},
|
|
"hpux-parisc1_1-gcc" => {
|
|
inherit_from => [ "hpux-parisc-gcc", asm("parisc11_asm") ],
|
|
multilib => "/pa1.1",
|
|
},
|
|
"hpux64-parisc2-gcc" => {
|
|
inherit_from => [ "hpux-common", asm("parisc20_64_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => combine(picker(debug => "-O0 -g",
|
|
release => "-O3")),
|
|
cflags => add(threads("-pthread")),
|
|
ex_libs => add("-ldl", threads("-pthread")),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
|
|
shared_cflag => "-fpic",
|
|
shared_ldflag => add_before("-shared"),
|
|
shared_extension => ".sl.\$(SHLIB_VERSION_NUMBER)",
|
|
multilib => "/pa20_64",
|
|
},
|
|
|
|
# More attempts at unified 10.X and 11.X targets for HP C compiler.
|
|
"hpux-parisc-cc" => {
|
|
inherit_from => [ "hpux-common" ],
|
|
CC => "cc",
|
|
CFLAGS => picker(debug => "+O0 +d -g",
|
|
release => "+O3"),
|
|
cflags => "+Optrs_strongly_typed -Ae +ESlit",
|
|
cppflags => threads("-D_REENTRANT"),
|
|
lib_cppflags => add("-DBN_DIV2W -DMD32_XARRAY"),
|
|
ex_libs => add("-ldld", threads("-lpthread")),
|
|
bn_ops => "RC4_CHAR",
|
|
dso_scheme => "dl",
|
|
shared_cflag => "+Z",
|
|
shared_ldflag => add_before("-b"),
|
|
shared_extension => ".sl.\$(SHLIB_VERSION_NUMBER)",
|
|
},
|
|
"hpux-parisc1_1-cc" => {
|
|
inherit_from => [ "hpux-parisc-cc", asm("parisc11_asm") ],
|
|
cflags => add_before("+DA1.1"),
|
|
multilib => "/pa1.1",
|
|
},
|
|
"hpux64-parisc2-cc" => {
|
|
inherit_from => [ "hpux-common", asm("parisc20_64_asm") ],
|
|
CC => "cc",
|
|
CFLAGS => picker(debug => "+O0 +d -g",
|
|
release => "+O3") ,
|
|
cflags => "+DD64 +Optrs_strongly_typed -Ae +ESlit",
|
|
cppflags => threads("-D_REENTRANT") ,
|
|
lib_cppflags => add("-DMD32_XARRAY"),
|
|
ex_libs => add("-ldl", threads("-lpthread")),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
|
|
shared_cflag => "+Z",
|
|
shared_ldflag => add_before("-b"),
|
|
shared_extension => ".sl.\$(SHLIB_VERSION_NUMBER)",
|
|
multilib => "/pa20_64",
|
|
},
|
|
|
|
# HP/UX IA-64 targets
|
|
"hpux-ia64-cc" => {
|
|
inherit_from => [ "hpux-common", asm("ia64_asm") ],
|
|
CC => "cc",
|
|
CFLAGS => picker(debug => "+O0 +d -g",
|
|
release => "+O2"),
|
|
cflags => "-Ae +DD32 +Olit=all -z",
|
|
cppflags => add(threads("-D_REENTRANT")),
|
|
ex_libs => add("-ldl", threads("-lpthread")),
|
|
bn_ops => "SIXTY_FOUR_BIT",
|
|
shared_cflag => "+Z",
|
|
shared_ldflag => add_before("-b"),
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
multilib => "/hpux32",
|
|
},
|
|
"hpux64-ia64-cc" => {
|
|
inherit_from => [ "hpux-common", asm("ia64_asm") ],
|
|
CC => "cc",
|
|
CFLAGS => picker(debug => "+O0 +d -g",
|
|
release => "+O3"),
|
|
cflags => "-Ae +DD64 +Olit=all -z",
|
|
cppflags => threads("-D_REENTRANT"),
|
|
ex_libs => add("-ldl", threads("-lpthread")),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
shared_cflag => "+Z",
|
|
shared_ldflag => add_before("-b"),
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
multilib => "/hpux64",
|
|
},
|
|
# GCC builds...
|
|
"hpux-ia64-gcc" => {
|
|
inherit_from => [ "hpux-common", asm("ia64_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => picker(debug => "-O0 -g",
|
|
release => "-O3"),
|
|
cflags => add(threads("-pthread")),
|
|
ex_libs => add("-ldl", threads("-pthread")),
|
|
bn_ops => "SIXTY_FOUR_BIT",
|
|
shared_cflag => "-fpic",
|
|
shared_ldflag => add_before("-shared"),
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
multilib => "/hpux32",
|
|
},
|
|
"hpux64-ia64-gcc" => {
|
|
inherit_from => [ "hpux-common", asm("ia64_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => picker(debug => "-O0 -g",
|
|
release => "-O3"),
|
|
cflags => combine("-mlp64", threads("-pthread")),
|
|
ex_libs => add("-ldl", threads("-pthread")),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
shared_cflag => "-fpic",
|
|
shared_ldflag => add_before("-shared"),
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
multilib => "/hpux64",
|
|
},
|
|
|
|
#### HP MPE/iX http://jazz.external.hp.com/src/openssl/
|
|
"MPE/iX-gcc" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "gcc",
|
|
CFLAGS => "-O3",
|
|
cppflags => "-D_POSIX_SOURCE -D_SOCKET_SOURCE",
|
|
includes => [ "/SYSLOG/PUB" ],
|
|
lib_cppflags => "-DBN_DIV2W",
|
|
sys_id => "MPE",
|
|
lflags => add("-L/SYSLOG/PUB"),
|
|
ex_libs => add("-lsyslog -lsocket -lcurses"),
|
|
thread_scheme => "(unknown)",
|
|
bn_ops => "BN_LLONG",
|
|
},
|
|
|
|
#### DEC Alpha Tru64 targets. Tru64 is marketing name for OSF/1 version 4
|
|
#### and forward. In reality 'uname -s' still returns "OSF1". Originally
|
|
#### there were even osf1-* configs targeting prior versions provided,
|
|
#### but not anymore...
|
|
"tru64-alpha-gcc" => {
|
|
inherit_from => [ "BASE_unix", asm("alpha_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => "-O3",
|
|
cflags => add("-std=c9x", threads("-pthread")),
|
|
cppflags => "-D_XOPEN_SOURCE=500 -D_OSF_SOURCE",
|
|
ex_libs => add("-lrt", threads("-pthread")), # for mlock(2)
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
thread_scheme => "pthreads",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "alpha-osf1-shared",
|
|
shared_extension => ".so",
|
|
},
|
|
"tru64-alpha-cc" => {
|
|
inherit_from => [ "BASE_unix", asm("alpha_asm") ],
|
|
CC => "cc",
|
|
CFLAGS => "-tune host -fast",
|
|
cflags => add("-std1 -readonly_strings",
|
|
threads("-pthread")),
|
|
cppflags => "-D_XOPEN_SOURCE=500 -D_OSF_SOURCE",
|
|
ex_libs => add("-lrt", threads("-pthread")), # for mlock(2)
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
thread_scheme => "pthreads",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "alpha-osf1-shared",
|
|
shared_ldflag => "-msym",
|
|
shared_extension => ".so",
|
|
},
|
|
|
|
####
|
|
#### Variety of LINUX:-)
|
|
####
|
|
# *-generic* is endian-neutral target, but ./config is free to
|
|
# throw in -D[BL]_ENDIAN, whichever appropriate...
|
|
"linux-generic32" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "gcc",
|
|
CXX => "g++",
|
|
CFLAGS => picker(default => "-Wall",
|
|
debug => "-O0 -g",
|
|
release => "-O3"),
|
|
CXXFLAGS => picker(default => "-Wall",
|
|
debug => "-O0 -g",
|
|
release => "-O3"),
|
|
cflags => threads("-pthread"),
|
|
cxxflags => combine("-std=c++11", threads("-pthread")),
|
|
lib_cppflags => "-DOPENSSL_USE_NODELETE",
|
|
ex_libs => add("-ldl", threads("-pthread")),
|
|
bn_ops => "BN_LLONG RC4_CHAR",
|
|
thread_scheme => "pthreads",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "linux-shared",
|
|
shared_cflag => "-fPIC",
|
|
shared_ldflag => sub { $disabled{pinshared} ? () : "-Wl,-znodelete" },
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
enable => [ "afalgeng" ],
|
|
},
|
|
"linux-generic64" => {
|
|
inherit_from => [ "linux-generic32" ],
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
|
|
},
|
|
|
|
"linux-ppc" => {
|
|
inherit_from => [ "linux-generic32", asm("ppc32_asm") ],
|
|
perlasm_scheme => "linux32",
|
|
},
|
|
"linux-ppc64" => {
|
|
inherit_from => [ "linux-generic64", asm("ppc64_asm") ],
|
|
cflags => add("-m64"),
|
|
cxxflags => add("-m64"),
|
|
lib_cppflags => add("-DB_ENDIAN"),
|
|
perlasm_scheme => "linux64",
|
|
multilib => "64",
|
|
},
|
|
"linux-ppc64le" => {
|
|
inherit_from => [ "linux-generic64", asm("ppc64_asm") ],
|
|
cflags => add("-m64"),
|
|
cxxflags => add("-m64"),
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
perlasm_scheme => "linux64le",
|
|
},
|
|
|
|
"linux-armv4" => {
|
|
################################################################
|
|
# Note that -march is not among compiler options in linux-armv4
|
|
# target description. Not specifying one is intentional to give
|
|
# you choice to:
|
|
#
|
|
# a) rely on your compiler default by not specifying one;
|
|
# b) specify your target platform explicitly for optimal
|
|
# performance, e.g. -march=armv6 or -march=armv7-a;
|
|
# c) build "universal" binary that targets *range* of platforms
|
|
# by specifying minimum and maximum supported architecture;
|
|
#
|
|
# As for c) option. It actually makes no sense to specify
|
|
# maximum to be less than ARMv7, because it's the least
|
|
# requirement for run-time switch between platform-specific
|
|
# code paths. And without run-time switch performance would be
|
|
# equivalent to one for minimum. Secondly, there are some
|
|
# natural limitations that you'd have to accept and respect.
|
|
# Most notably you can *not* build "universal" binary for
|
|
# big-endian platform. This is because ARMv7 processor always
|
|
# picks instructions in little-endian order. Another similar
|
|
# limitation is that -mthumb can't "cross" -march=armv6t2
|
|
# boundary, because that's where it became Thumb-2. Well, this
|
|
# limitation is a bit artificial, because it's not really
|
|
# impossible, but it's deemed too tricky to support. And of
|
|
# course you have to be sure that your binutils are actually
|
|
# up to the task of handling maximum target platform. With all
|
|
# this in mind here is an example of how to configure
|
|
# "universal" build:
|
|
#
|
|
# ./Configure linux-armv4 -march=armv6 -D__ARM_MAX_ARCH__=8
|
|
#
|
|
inherit_from => [ "linux-generic32", asm("armv4_asm") ],
|
|
perlasm_scheme => "linux32",
|
|
},
|
|
"linux-aarch64" => {
|
|
inherit_from => [ "linux-generic64", asm("aarch64_asm") ],
|
|
perlasm_scheme => "linux64",
|
|
},
|
|
"linux-arm64ilp32" => { # https://wiki.linaro.org/Platform/arm64-ilp32
|
|
inherit_from => [ "linux-generic32", asm("aarch64_asm") ],
|
|
cflags => add("-mabi=ilp32"),
|
|
cxxflags => add("-mabi=ilp32"),
|
|
bn_ops => "SIXTY_FOUR_BIT RC4_CHAR",
|
|
perlasm_scheme => "linux64",
|
|
},
|
|
|
|
"linux-mips32" => {
|
|
# Configure script adds minimally required -march for assembly
|
|
# support, if no -march was specified at command line.
|
|
inherit_from => [ "linux-generic32", asm("mips32_asm") ],
|
|
cflags => add("-mabi=32"),
|
|
cxxflags => add("-mabi=32"),
|
|
perlasm_scheme => "o32",
|
|
},
|
|
# mips32 and mips64 below refer to contemporary MIPS Architecture
|
|
# specifications, MIPS32 and MIPS64, rather than to kernel bitness.
|
|
"linux-mips64" => {
|
|
inherit_from => [ "linux-generic32", asm("mips64_asm") ],
|
|
cflags => add("-mabi=n32"),
|
|
cxxflags => add("-mabi=n32"),
|
|
bn_ops => "SIXTY_FOUR_BIT RC4_CHAR",
|
|
perlasm_scheme => "n32",
|
|
multilib => "32",
|
|
},
|
|
"linux64-mips64" => {
|
|
inherit_from => [ "linux-generic64", asm("mips64_asm") ],
|
|
cflags => add("-mabi=64"),
|
|
cxxflags => add("-mabi=64"),
|
|
perlasm_scheme => "64",
|
|
multilib => "64",
|
|
},
|
|
|
|
#### IA-32 targets...
|
|
#### These two targets are a bit aged and are to be used on older Linux
|
|
#### machines where gcc doesn't understand -m32 and -m64
|
|
"linux-elf" => {
|
|
inherit_from => [ "linux-generic32", asm("x86_elf_asm") ],
|
|
CFLAGS => add(picker(release => "-fomit-frame-pointer")),
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
bn_ops => "BN_LLONG",
|
|
},
|
|
"linux-aout" => {
|
|
inherit_from => [ "BASE_unix", asm("x86_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => add(picker(default => "-Wall",
|
|
debug => "-O0 -g",
|
|
release => "-O3 -fomit-frame-pointer")),
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
bn_ops => "BN_LLONG",
|
|
thread_scheme => "(unknown)",
|
|
perlasm_scheme => "a.out",
|
|
},
|
|
|
|
#### X86 / X86_64 targets
|
|
"linux-x86" => {
|
|
inherit_from => [ "linux-generic32", asm("x86_asm") ],
|
|
CFLAGS => add(picker(release => "-fomit-frame-pointer")),
|
|
cflags => add("-m32"),
|
|
cxxflags => add("-m32"),
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
bn_ops => "BN_LLONG",
|
|
perlasm_scheme => "elf",
|
|
},
|
|
"linux-x86-clang" => {
|
|
inherit_from => [ "linux-x86" ],
|
|
CC => "clang",
|
|
CXX => "clang++",
|
|
},
|
|
"linux-x86_64" => {
|
|
inherit_from => [ "linux-generic64", asm("x86_64_asm") ],
|
|
cflags => add("-m64"),
|
|
cxxflags => add("-m64"),
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
perlasm_scheme => "elf",
|
|
multilib => "64",
|
|
},
|
|
"linux-x86_64-clang" => {
|
|
inherit_from => [ "linux-x86_64" ],
|
|
CC => "clang",
|
|
CXX => "clang++",
|
|
},
|
|
"linux-x32" => {
|
|
inherit_from => [ "linux-generic32", asm("x86_64_asm") ],
|
|
cflags => add("-mx32"),
|
|
cxxflags => add("-mx32"),
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
bn_ops => "SIXTY_FOUR_BIT",
|
|
perlasm_scheme => "elf32",
|
|
multilib => "x32",
|
|
},
|
|
|
|
"linux-ia64" => {
|
|
inherit_from => [ "linux-generic64", asm("ia64_asm") ],
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
},
|
|
|
|
"linux64-s390x" => {
|
|
inherit_from => [ "linux-generic64", asm("s390x_asm") ],
|
|
cflags => add("-m64"),
|
|
cxxflags => add("-m64"),
|
|
lib_cppflags => add("-DB_ENDIAN"),
|
|
perlasm_scheme => "64",
|
|
multilib => "64",
|
|
},
|
|
"linux32-s390x" => {
|
|
#### So called "highgprs" target for z/Architecture CPUs
|
|
# "Highgprs" is kernel feature first implemented in Linux
|
|
# 2.6.32, see /proc/cpuinfo. The idea is to preserve most
|
|
# significant bits of general purpose registers not only
|
|
# upon 32-bit process context switch, but even on
|
|
# asynchronous signal delivery to such process. This makes
|
|
# it possible to deploy 64-bit instructions even in legacy
|
|
# application context and achieve better [or should we say
|
|
# adequate] performance. The build is binary compatible with
|
|
# linux-generic32, and the idea is to be able to install the
|
|
# resulting libcrypto.so alongside generic one, e.g. as
|
|
# /lib/highgprs/libcrypto.so.x.y, for ldconfig and run-time
|
|
# linker to autodiscover. Unfortunately it doesn't work just
|
|
# yet, because of couple of bugs in glibc
|
|
# sysdeps/s390/dl-procinfo.c affecting ldconfig and ld.so.1...
|
|
#
|
|
inherit_from => [ "linux-generic32", asm("s390x_asm") ],
|
|
cflags => add("-m31 -Wa,-mzarch"),
|
|
cxxflags => add("-m31 -Wa,-mzarch"),
|
|
lib_cppflags => add("-DB_ENDIAN"),
|
|
bn_asm_src => sub { my $r=join(" ",@_); $r=~s|asm/s390x\.S|bn_asm.c|; $r; },
|
|
perlasm_scheme => "31",
|
|
multilib => "/highgprs",
|
|
},
|
|
|
|
#### SPARC Linux setups
|
|
"linux-sparcv8" => {
|
|
inherit_from => [ "linux-generic32", asm("sparcv8_asm") ],
|
|
cflags => add("-mcpu=v8"),
|
|
cxxflags => add("-mcpu=v8"),
|
|
lib_cppflags => add("-DB_ENDIAN -DBN_DIV2W"),
|
|
},
|
|
"linux-sparcv9" => {
|
|
# it's a real mess with -mcpu=ultrasparc option under Linux,
|
|
# but -Wa,-Av8plus should do the trick no matter what.
|
|
inherit_from => [ "linux-generic32", asm("sparcv9_asm") ],
|
|
cflags => add("-m32 -mcpu=ultrasparc -Wa,-Av8plus"),
|
|
cxxflags => add("-m32 -mcpu=ultrasparc -Wa,-Av8plus"),
|
|
lib_cppflags => add("-DB_ENDIAN -DBN_DIV2W"),
|
|
},
|
|
"linux64-sparcv9" => {
|
|
# GCC 3.1 is a requirement
|
|
inherit_from => [ "linux-generic64", asm("sparcv9_asm") ],
|
|
cflags => add("-m64 -mcpu=ultrasparc"),
|
|
cxxflags => add("-m64 -mcpu=ultrasparc"),
|
|
lib_cppflags => add("-DB_ENDIAN"),
|
|
bn_ops => "BN_LLONG RC4_CHAR",
|
|
multilib => "64",
|
|
},
|
|
|
|
"linux-alpha-gcc" => {
|
|
inherit_from => [ "linux-generic64", asm("alpha_asm") ],
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
},
|
|
"linux-c64xplus" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
# TI_CGT_C6000_7.3.x is a requirement
|
|
CC => "cl6x",
|
|
CFLAGS => "-o2 -ox -ms",
|
|
cflags => "--linux -ea=.s -eo=.o -mv6400+ -pden",
|
|
cxxflags => "--linux -ea=.s -eo=.o -mv6400+ -pden",
|
|
cppflags => combine("-DOPENSSL_SMALL_FOOTPRINT",
|
|
threads("-D_REENTRANT")),
|
|
bn_ops => "BN_LLONG",
|
|
cpuid_asm_src => "c64xpluscpuid.s",
|
|
bn_asm_src => "asm/bn-c64xplus.asm c64xplus-gf2m.s",
|
|
aes_asm_src => "aes-c64xplus.s aes_cbc.c aes-ctr.fake",
|
|
sha1_asm_src => "sha1-c64xplus.s sha256-c64xplus.s sha512-c64xplus.s",
|
|
rc4_asm_src => "rc4-c64xplus.s",
|
|
modes_asm_src => "ghash-c64xplus.s",
|
|
chacha_asm_src => "chacha-c64xplus.s",
|
|
poly1305_asm_src => "poly1305-c64xplus.s",
|
|
thread_scheme => "pthreads",
|
|
perlasm_scheme => "void",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "linux-shared",
|
|
shared_cflag => "--pic",
|
|
shared_ldflag => add("-z --sysv --shared"),
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
ranlib => "true",
|
|
},
|
|
|
|
#### *BSD
|
|
"BSD-generic32" => {
|
|
# As for thread cflag. Idea is to maintain "collective" set of
|
|
# flags, which would cover all BSD flavors. -pthread applies
|
|
# to them all, but is treated differently. OpenBSD expands is
|
|
# as -D_POSIX_THREAD -lc_r, which is sufficient. FreeBSD 4.x
|
|
# expands it as -lc_r, which has to be accompanied by explicit
|
|
# -D_THREAD_SAFE and sometimes -D_REENTRANT. FreeBSD 5.x
|
|
# expands it as -lc_r, which seems to be sufficient?
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "cc",
|
|
CFLAGS => picker(default => "-Wall",
|
|
debug => "-O0 -g",
|
|
release => "-O3"),
|
|
cflags => threads("-pthread"),
|
|
cppflags => threads("-D_THREAD_SAFE -D_REENTRANT"),
|
|
ex_libs => add(threads("-pthread")),
|
|
enable => add("devcryptoeng"),
|
|
bn_ops => "BN_LLONG",
|
|
thread_scheme => "pthreads",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "bsd-gcc-shared",
|
|
shared_cflag => "-fPIC",
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
},
|
|
"BSD-generic64" => {
|
|
inherit_from => [ "BSD-generic32" ],
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
},
|
|
|
|
"BSD-x86" => {
|
|
inherit_from => [ "BSD-generic32", asm("x86_asm") ],
|
|
CFLAGS => add(picker(release => "-fomit-frame-pointer")),
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
bn_ops => "BN_LLONG",
|
|
shared_target => "bsd-shared",
|
|
perlasm_scheme => "a.out",
|
|
},
|
|
"BSD-x86-elf" => {
|
|
inherit_from => [ "BSD-x86" ],
|
|
perlasm_scheme => "elf",
|
|
},
|
|
|
|
"BSD-sparcv8" => {
|
|
inherit_from => [ "BSD-generic32", asm("sparcv8_asm") ],
|
|
cflags => add("-mcpu=v8"),
|
|
lib_cppflags => add("-DB_ENDIAN"),
|
|
},
|
|
"BSD-sparc64" => {
|
|
# -DMD32_REG_T=int doesn't actually belong in sparc64 target, it
|
|
# simply *happens* to work around a compiler bug in gcc 3.3.3,
|
|
# triggered by RIPEMD160 code.
|
|
inherit_from => [ "BSD-generic64", asm("sparcv9_asm") ],
|
|
lib_cppflags => add("-DB_ENDIAN -DMD32_REG_T=int"),
|
|
bn_ops => "BN_LLONG",
|
|
},
|
|
|
|
"BSD-ia64" => {
|
|
inherit_from => [ "BSD-generic64", asm("ia64_asm") ],
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
},
|
|
|
|
"BSD-x86_64" => {
|
|
inherit_from => [ "BSD-generic64", asm("x86_64_asm") ],
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
perlasm_scheme => "elf",
|
|
},
|
|
|
|
"bsdi-elf-gcc" => {
|
|
inherit_from => [ "BASE_unix", asm("x86_elf_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => "-fomit-frame-pointer -O3 -Wall",
|
|
lib_cppflags => "-DPERL5 -DL_ENDIAN",
|
|
ex_libs => add("-ldl"),
|
|
bn_ops => "BN_LLONG",
|
|
thread_scheme => "(unknown)",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "bsd-gcc-shared",
|
|
shared_cflag => "-fPIC",
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
},
|
|
|
|
"nextstep" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "cc",
|
|
CFLAGS => "-O -Wall",
|
|
unistd => "<libc.h>",
|
|
bn_ops => "BN_LLONG",
|
|
thread_scheme => "(unknown)",
|
|
},
|
|
"nextstep3.3" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "cc",
|
|
CFLAGS => "-O3 -Wall",
|
|
unistd => "<libc.h>",
|
|
bn_ops => "BN_LLONG",
|
|
thread_scheme => "(unknown)",
|
|
},
|
|
|
|
#### SCO/Caldera targets.
|
|
#
|
|
# Originally we had like unixware-*, unixware-*-pentium, unixware-*-p6, etc.
|
|
# Now we only have blended unixware-* as it's the only one used by ./config.
|
|
# If you want to optimize for particular microarchitecture, bypass ./config
|
|
# and './Configure unixware-7 -Kpentium_pro' or whatever appropriate.
|
|
# Note that not all targets include assembler support. Mostly because of
|
|
# lack of motivation to support out-of-date platforms with out-of-date
|
|
# compiler drivers and assemblers.
|
|
#
|
|
# UnixWare 2.0x fails destest with -O.
|
|
"unixware-2.0" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "cc",
|
|
cflags => threads("-Kthread"),
|
|
lib_cppflags => "-DFILIO_H -DNO_STRINGS_H",
|
|
ex_libs => add("-lsocket -lnsl -lresolv -lx"),
|
|
thread_scheme => "uithreads",
|
|
},
|
|
"unixware-2.1" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "cc",
|
|
CFLAGS => "-O",
|
|
cflags => threads("-Kthread"),
|
|
lib_cppflags => "-DFILIO_H",
|
|
ex_libs => add("-lsocket -lnsl -lresolv -lx"),
|
|
thread_scheme => "uithreads",
|
|
},
|
|
"unixware-7" => {
|
|
inherit_from => [ "BASE_unix", asm("x86_elf_asm") ],
|
|
CC => "cc",
|
|
CFLAGS => "-O",
|
|
cflags => combine("-Kalloca", threads("-Kthread")),
|
|
lib_cppflags => "-DFILIO_H",
|
|
ex_libs => add("-lsocket -lnsl"),
|
|
thread_scheme => "uithreads",
|
|
bn_ops => "BN_LLONG",
|
|
perlasm_scheme => "elf-1",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "svr5-shared",
|
|
shared_cflag => "-Kpic",
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
},
|
|
"unixware-7-gcc" => {
|
|
inherit_from => [ "BASE_unix", asm("x86_elf_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => "-O3 -fomit-frame-pointer -Wall",
|
|
cppflags => add(threads("-D_REENTRANT")),
|
|
lib_cppflags => add("-DL_ENDIAN -DFILIO_H"),
|
|
ex_libs => add("-lsocket -lnsl"),
|
|
bn_ops => "BN_LLONG",
|
|
thread_scheme => "pthreads",
|
|
perlasm_scheme => "elf-1",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "gnu-shared",
|
|
shared_cflag => "-fPIC",
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
},
|
|
# SCO 5 - Ben Laurie says the -O breaks the SCO cc.
|
|
"sco5-cc" => {
|
|
inherit_from => [ "BASE_unix", asm("x86_elf_asm") ],
|
|
cc => "cc",
|
|
cflags => "-belf",
|
|
ex_libs => add("-lsocket -lnsl"),
|
|
thread_scheme => "(unknown)",
|
|
perlasm_scheme => "elf-1",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "svr3-shared",
|
|
shared_cflag => "-Kpic",
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
},
|
|
"sco5-gcc" => {
|
|
inherit_from => [ "BASE_unix", asm("x86_elf_asm") ],
|
|
cc => "gcc",
|
|
cflags => "-O3 -fomit-frame-pointer",
|
|
ex_libs => add("-lsocket -lnsl"),
|
|
bn_ops => "BN_LLONG",
|
|
thread_scheme => "(unknown)",
|
|
perlasm_scheme => "elf-1",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "svr3-shared",
|
|
shared_cflag => "-fPIC",
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
},
|
|
|
|
#### IBM's AIX.
|
|
# Below targets assume AIX >=5. Caveat lector. If you are accustomed
|
|
# to control compilation "bitness" by setting $OBJECT_MODE environment
|
|
# variable, then you should know that in OpenSSL case it's considered
|
|
# only in ./config. Once configured, build procedure remains "deaf" to
|
|
# current value of $OBJECT_MODE.
|
|
"aix-common" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
template => 1,
|
|
sys_id => "AIX",
|
|
lib_cppflags => "-DB_ENDIAN",
|
|
lflags => "-Wl,-bsvr4",
|
|
thread_scheme => "pthreads",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "self",
|
|
module_ldflags => "-Wl,-G,-bsymbolic,-bnoentry",
|
|
shared_ldflag => "-Wl,-G,-bsymbolic,-bnoentry",
|
|
shared_defflag => "-Wl,-bE:",
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
dso_extension => ".so",
|
|
lib_extension => shared("_a.a"),
|
|
shared_extension_simple => shared(".a"),
|
|
},
|
|
"aix-gcc" => {
|
|
inherit_from => [ "aix-common", asm("ppc32_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => picker(debug => "-O0 -g",
|
|
release => "-O"),
|
|
cflags => add(threads("-pthread")),
|
|
ex_libs => threads("-pthread"),
|
|
bn_ops => "BN_LLONG RC4_CHAR",
|
|
perlasm_scheme => "aix32",
|
|
shared_ldflag => add_before("-shared -static-libgcc"),
|
|
AR => add("-X32"),
|
|
RANLIB => add("-X32"),
|
|
},
|
|
"aix64-gcc" => {
|
|
inherit_from => [ "aix-common", asm("ppc64_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => picker(debug => "-O0 -g",
|
|
release => "-O"),
|
|
cflags => combine("-maix64", threads("-pthread")),
|
|
ex_libs => threads("-pthread"),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
|
|
perlasm_scheme => "aix64",
|
|
shared_ldflag => add_before("-shared -static-libgcc"),
|
|
shared_extension => "64.so.\$(SHLIB_VERSION_NUMBER)",
|
|
AR => add("-X64"),
|
|
RANLIB => add("-X64"),
|
|
},
|
|
"aix-cc" => {
|
|
inherit_from => [ "aix-common", asm("ppc32_asm") ],
|
|
CC => "cc",
|
|
CFLAGS => picker(debug => "-O0 -g",
|
|
release => "-O"),
|
|
cflags => combine("-q32 -qmaxmem=16384 -qro -qroconst",
|
|
threads("-qthreaded")),
|
|
cppflags => threads("-D_THREAD_SAFE"),
|
|
ex_libs => threads("-lpthreads"),
|
|
bn_ops => "BN_LLONG RC4_CHAR",
|
|
perlasm_scheme => "aix32",
|
|
shared_cflag => "-qpic",
|
|
AR => add("-X32"),
|
|
RANLIB => add("-X32"),
|
|
},
|
|
"aix64-cc" => {
|
|
inherit_from => [ "aix-common", asm("ppc64_asm") ],
|
|
CC => "cc",
|
|
CFLAGS => picker(debug => "-O0 -g",
|
|
release => "-O"),
|
|
cflags => combine("-q64 -qmaxmem=16384 -qro -qroconst",
|
|
threads("-qthreaded")),
|
|
cppflags => threads("-D_THREAD_SAFE"),
|
|
ex_libs => threads("-lpthreads"),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
|
|
perlasm_scheme => "aix64",
|
|
dso_scheme => "dlfcn",
|
|
shared_cflag => "-qpic",
|
|
shared_extension => "64.so.\$(SHLIB_VERSION_NUMBER)",
|
|
AR => add("-X64"),
|
|
RANLIB => add("-X64"),
|
|
},
|
|
|
|
# SIEMENS BS2000/OSD: an EBCDIC-based mainframe
|
|
"BS2000-OSD" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "c89",
|
|
CFLAGS => "-O",
|
|
cflags => "-XLLML -XLLMK -XL",
|
|
cppflags => "-DCHARSET_EBCDIC",
|
|
lib_cppflags => "-DB_ENDIAN",
|
|
ex_libs => add("-lsocket -lnsl"),
|
|
bn_ops => "THIRTY_TWO_BIT RC4_CHAR",
|
|
thread_scheme => "(unknown)",
|
|
},
|
|
|
|
#### Visual C targets
|
|
#
|
|
# Win64 targets, WIN64I denotes IA-64/Itanium and WIN64A - AMD64
|
|
#
|
|
# Note about /wd4090, disable warning C4090. This warning returns false
|
|
# positives in some situations. Disabling it altogether masks both
|
|
# legitimate and false cases, but as we compile on multiple platforms,
|
|
# we rely on other compilers to catch legitimate cases.
|
|
#
|
|
# Also note that we force threads no matter what. Configuring "no-threads"
|
|
# is ignored.
|
|
#
|
|
# UNICODE is defined in VC-common and applies to all targets. It used to
|
|
# be an opt-in option for VC-WIN32, but not anymore. The original reason
|
|
# was because ANSI API was *native* system interface for no longer
|
|
# supported Windows 9x. Keep in mind that UNICODE only affects how
|
|
# OpenSSL libraries interact with underlying OS, it doesn't affect API
|
|
# that OpenSSL presents to application.
|
|
|
|
"VC-common" => {
|
|
inherit_from => [ "BASE_Windows" ],
|
|
template => 1,
|
|
CC => "cl",
|
|
CPP => '$(CC) /EP /C',
|
|
CFLAGS => "/W3 /wd4090 /nologo",
|
|
LDFLAGS => add("/debug"),
|
|
coutflag => "/Fo",
|
|
defines => add("OPENSSL_SYS_WIN32", "WIN32_LEAN_AND_MEAN",
|
|
"UNICODE", "_UNICODE",
|
|
"_CRT_SECURE_NO_DEPRECATE",
|
|
"_WINSOCK_DEPRECATED_NO_WARNINGS"),
|
|
lib_cflags => add("/Zi /Fdossl_static.pdb"),
|
|
lib_defines => add("L_ENDIAN"),
|
|
dso_cflags => "/Zi /Fddso.pdb",
|
|
bin_cflags => "/Zi /Fdapp.pdb",
|
|
shared_ldflag => "/dll",
|
|
shared_target => "win-shared", # meaningless except it gives Configure a hint
|
|
thread_scheme => "winthreads",
|
|
dso_scheme => "win32",
|
|
apps_aux_src => add("win32_init.c"),
|
|
bn_ops => "EXPORT_VAR_AS_FN",
|
|
# additional parameter to build_scheme denotes install-path "flavour"
|
|
build_scheme => add("VC-common", { separator => undef }),
|
|
},
|
|
"VC-noCE-common" => {
|
|
inherit_from => [ "VC-common" ],
|
|
template => 1,
|
|
CFLAGS => add(picker(debug => '/Od',
|
|
release => '/O2')),
|
|
cflags => add(picker(default => '/Gs0 /GF /Gy',
|
|
debug =>
|
|
sub {
|
|
($disabled{shared} ? "" : "/MDd");
|
|
},
|
|
release =>
|
|
sub {
|
|
($disabled{shared} ? "" : "/MD");
|
|
})),
|
|
defines => add(picker(default => [], # works as type cast
|
|
debug => [ "DEBUG", "_DEBUG" ])),
|
|
lib_cflags => add(sub { $disabled{shared} ? "/MT /Zl" : () }),
|
|
# Following might/should appears controversial, i.e. defining
|
|
# /MDd without evaluating $disabled{shared}. It works in
|
|
# non-shared build because static library is compiled with /Zl
|
|
# and bares no reference to specific RTL. And it works in
|
|
# shared build because multiple /MDd options are not prohibited.
|
|
# But why /MDd in static build? Well, basically this is just a
|
|
# reference point, which allows to catch eventual errors that
|
|
# would prevent those who want to wrap OpenSSL into own .DLL.
|
|
# Why not /MD in release build then? Well, some are likely to
|
|
# prefer [non-debug] openssl.exe to be free from Micorosoft RTL
|
|
# redistributable.
|
|
bin_cflags => add(picker(debug => "/MDd",
|
|
release => sub { $disabled{shared} ? "/MT" : () },
|
|
)),
|
|
bin_lflags => add("/subsystem:console /opt:ref"),
|
|
ex_libs => add(sub {
|
|
my @ex_libs = ();
|
|
push @ex_libs, 'ws2_32.lib' unless $disabled{sock};
|
|
push @ex_libs, 'gdi32.lib advapi32.lib crypt32.lib user32.lib';
|
|
return join(" ", @ex_libs);
|
|
}),
|
|
},
|
|
"VC-WIN64-common" => {
|
|
inherit_from => [ "VC-noCE-common" ],
|
|
template => 1,
|
|
ex_libs => add(sub {
|
|
my @ex_libs = ();
|
|
push @ex_libs, 'bufferoverflowu.lib' if (`cl 2>&1` =~ /14\.00\.4[0-9]{4}\./);
|
|
return join(" ", @_, @ex_libs);
|
|
}),
|
|
bn_ops => add("SIXTY_FOUR_BIT"),
|
|
},
|
|
"VC-WIN64I" => {
|
|
inherit_from => [ "VC-WIN64-common", asm("ia64_asm"),
|
|
sub { $disabled{shared} ? () : "ia64_uplink" } ],
|
|
AS => "ias",
|
|
ASFLAGS => "-d debug",
|
|
asoutflag => "-o ",
|
|
sys_id => "WIN64I",
|
|
bn_asm_src => sub { return undef unless @_;
|
|
my $r=join(" ",@_); $r=~s|bn-ia64.s|bn_asm.c|; $r; },
|
|
perlasm_scheme => "ias",
|
|
multilib => "-ia64",
|
|
},
|
|
"VC-WIN64A" => {
|
|
inherit_from => [ "VC-WIN64-common", asm("x86_64_asm"),
|
|
sub { $disabled{shared} ? () : "x86_64_uplink" } ],
|
|
AS => sub { vc_win64a_info()->{AS} },
|
|
ASFLAGS => sub { vc_win64a_info()->{ASFLAGS} },
|
|
asoutflag => sub { vc_win64a_info()->{asoutflag} },
|
|
asflags => sub { vc_win64a_info()->{asflags} },
|
|
sys_id => "WIN64A",
|
|
bn_asm_src => sub { return undef unless @_;
|
|
my $r=join(" ",@_); $r=~s|asm/x86_64-gcc|bn_asm|; $r; },
|
|
perlasm_scheme => "auto",
|
|
multilib => "-x64",
|
|
},
|
|
"VC-WIN32" => {
|
|
inherit_from => [ "VC-noCE-common", asm("x86_asm"),
|
|
sub { $disabled{shared} ? () : "uplink_common" } ],
|
|
CFLAGS => add("/WX"),
|
|
AS => sub { vc_win32_info()->{AS} },
|
|
ASFLAGS => sub { vc_win32_info()->{ASFLAGS} },
|
|
asoutflag => sub { vc_win32_info()->{asoutflag} },
|
|
asflags => sub { vc_win32_info()->{asflags} },
|
|
sys_id => "WIN32",
|
|
bn_ops => add("BN_LLONG"),
|
|
perlasm_scheme => sub { vc_win32_info()->{perlasm_scheme} },
|
|
# "WOW" stands for "Windows on Windows", and "VC-WOW" engages
|
|
# some installation path heuristics in windows-makefile.tmpl...
|
|
build_scheme => add("VC-WOW", { separator => undef }),
|
|
},
|
|
"VC-CE" => {
|
|
inherit_from => [ "VC-common" ],
|
|
CFLAGS => add(picker(debug => "/Od",
|
|
release => "/O1i")),
|
|
CPPDEFINES => picker(debug => [ "DEBUG", "_DEBUG" ]),
|
|
LDFLAGS => add("/nologo /opt:ref"),
|
|
cflags =>
|
|
combine('/GF /Gy',
|
|
sub { vc_wince_info()->{cflags}; },
|
|
sub { `cl 2>&1` =~ /Version ([0-9]+)\./ && $1>=14
|
|
? ($disabled{shared} ? " /MT" : " /MD")
|
|
: " /MC"; }),
|
|
cppflags => sub { vc_wince_info()->{cppflags}; },
|
|
lib_defines => add("NO_CHMOD", "OPENSSL_SMALL_FOOTPRINT"),
|
|
lib_cppflags => sub { vc_wince_info()->{cppflags}; },
|
|
includes =>
|
|
add(combine(sub { defined(env('WCECOMPAT'))
|
|
? '$(WCECOMPAT)/include' : (); },
|
|
sub { defined(env('PORTSDK_LIBPATH'))
|
|
? '$(PORTSDK_LIBPATH)/../../include'
|
|
: (); })),
|
|
lflags => add(combine(sub { vc_wince_info()->{lflags}; },
|
|
sub { defined(env('PORTSDK_LIBPATH'))
|
|
? "/entry:mainCRTstartup" : (); })),
|
|
sys_id => "WINCE",
|
|
bn_ops => add("BN_LLONG"),
|
|
ex_libs => add(sub {
|
|
my @ex_libs = ();
|
|
push @ex_libs, 'ws2.lib' unless $disabled{sock};
|
|
push @ex_libs, 'crypt32.lib';
|
|
if (defined(env('WCECOMPAT'))) {
|
|
my $x = '$(WCECOMPAT)/lib';
|
|
if (-f "$x/env('TARGETCPU')/wcecompatex.lib") {
|
|
$x .= '/$(TARGETCPU)/wcecompatex.lib';
|
|
} else {
|
|
$x .= '/wcecompatex.lib';
|
|
}
|
|
push @ex_libs, $x;
|
|
}
|
|
push @ex_libs, '$(PORTSDK_LIBPATH)/portlib.lib'
|
|
if (defined(env('PORTSDK_LIBPATH')));
|
|
push @ex_libs, ' /nodefaultlib coredll.lib corelibc.lib'
|
|
if (env('TARGETCPU') eq "X86");
|
|
return @ex_libs;
|
|
}),
|
|
},
|
|
|
|
#### MinGW
|
|
"mingw" => {
|
|
inherit_from => [ "BASE_unix", asm("x86_asm"),
|
|
sub { $disabled{shared} ? () : "x86_uplink" } ],
|
|
CC => "gcc",
|
|
CFLAGS => picker(default => "-Wall",
|
|
debug => "-g -O0",
|
|
release => "-O3 -fomit-frame-pointer"),
|
|
cflags => "-m32",
|
|
cppflags => combine("-DUNICODE -D_UNICODE -DWIN32_LEAN_AND_MEAN",
|
|
threads("-D_MT")),
|
|
lib_cppflags => "-DL_ENDIAN",
|
|
sys_id => "MINGW32",
|
|
ex_libs => add("-lws2_32 -lgdi32 -lcrypt32"),
|
|
bn_ops => "BN_LLONG EXPORT_VAR_AS_FN",
|
|
thread_scheme => "winthreads",
|
|
perlasm_scheme => "coff",
|
|
dso_scheme => "win32",
|
|
shared_target => "mingw-shared",
|
|
shared_cppflags => add("_WINDLL"),
|
|
shared_ldflag => "-static-libgcc",
|
|
shared_rcflag => "--target=pe-i386",
|
|
shared_extension => ".dll",
|
|
multilib => "",
|
|
apps_aux_src => add("win32_init.c"),
|
|
# "WOW" stands for "Windows on Windows", and that word engages
|
|
# some installation path heuristics in unix-Makefile.tmpl...
|
|
build_scheme => add("WOW", { separator => undef }),
|
|
|
|
},
|
|
"mingw64" => {
|
|
# As for OPENSSL_USE_APPLINK. Applink makes it possible to use
|
|
# .dll compiled with one compiler with application compiled with
|
|
# another compiler. It's possible to engage Applink support in
|
|
# mingw64 build, but it's not done, because till mingw64
|
|
# supports structured exception handling, one can't seriously
|
|
# consider its binaries for using with non-mingw64 run-time
|
|
# environment. And as mingw64 is always consistent with itself,
|
|
# Applink is never engaged and can as well be omitted.
|
|
inherit_from => [ "BASE_unix", asm("x86_64_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => picker(default => "-Wall",
|
|
debug => "-g -O0",
|
|
release => "-O3"),
|
|
cflags => "-m64",
|
|
cppflags => combine("-DUNICODE -D_UNICODE -DWIN32_LEAN_AND_MEAN",
|
|
threads("-D_MT")),
|
|
lib_cppflags => "-DL_ENDIAN",
|
|
sys_id => "MINGW64",
|
|
ex_libs => add("-lws2_32 -lgdi32 -lcrypt32"),
|
|
bn_ops => "SIXTY_FOUR_BIT EXPORT_VAR_AS_FN",
|
|
thread_scheme => "winthreads",
|
|
perlasm_scheme => "mingw64",
|
|
dso_scheme => "win32",
|
|
shared_target => "mingw-shared",
|
|
shared_cppflags => add("_WINDLL"),
|
|
shared_ldflag => "-static-libgcc",
|
|
shared_rcflag => "--target=pe-x86-64",
|
|
shared_extension => ".dll",
|
|
multilib => "64",
|
|
apps_aux_src => add("win32_init.c"),
|
|
},
|
|
|
|
#### UEFI
|
|
"UEFI" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "cc",
|
|
CFLAGS => "-O",
|
|
lib_cppflags => "-DL_ENDIAN",
|
|
sys_id => "UEFI",
|
|
},
|
|
|
|
#### UWIN
|
|
"UWIN" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "cc",
|
|
CFLAGS => "-O -Wall",
|
|
lib_cppflags => "-DTERMIOS -DL_ENDIAN",
|
|
sys_id => "UWIN",
|
|
bn_ops => "BN_LLONG",
|
|
dso_scheme => "win32",
|
|
},
|
|
|
|
#### Cygwin
|
|
"Cygwin-x86" => {
|
|
inherit_from => [ "BASE_unix", asm("x86_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => picker(default => "-Wall",
|
|
debug => "-g -O0",
|
|
release => "-O3 -fomit-frame-pointer"),
|
|
lib_cppflags => "-DTERMIOS -DL_ENDIAN",
|
|
sys_id => "CYGWIN",
|
|
bn_ops => "BN_LLONG",
|
|
thread_scheme => "pthread",
|
|
perlasm_scheme => "coff",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "cygwin-shared",
|
|
shared_cppflags => "-D_WINDLL",
|
|
shared_extension => ".dll",
|
|
},
|
|
"Cygwin-x86_64" => {
|
|
inherit_from => [ "BASE_unix", asm("x86_64_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => picker(default => "-Wall",
|
|
debug => "-g -O0",
|
|
release => "-O3"),
|
|
lib_cppflags => "-DTERMIOS -DL_ENDIAN",
|
|
sys_id => "CYGWIN",
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
thread_scheme => "pthread",
|
|
perlasm_scheme => "mingw64",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "cygwin-shared",
|
|
shared_cppflags => "-D_WINDLL",
|
|
shared_extension => ".dll",
|
|
},
|
|
# Backward compatibility for those using this target
|
|
"Cygwin" => {
|
|
inherit_from => [ "Cygwin-x86" ]
|
|
},
|
|
# In case someone constructs the Cygwin target name themself
|
|
"Cygwin-i386" => {
|
|
inherit_from => [ "Cygwin-x86" ]
|
|
},
|
|
"Cygwin-i486" => {
|
|
inherit_from => [ "Cygwin-x86" ]
|
|
},
|
|
"Cygwin-i586" => {
|
|
inherit_from => [ "Cygwin-x86" ]
|
|
},
|
|
"Cygwin-i686" => {
|
|
inherit_from => [ "Cygwin-x86" ]
|
|
},
|
|
|
|
##### MacOS X (a.k.a. Darwin) setup
|
|
"darwin-common" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
template => 1,
|
|
CC => "cc",
|
|
CFLAGS => picker(debug => "-g -O0",
|
|
release => "-O3"),
|
|
cppflags => threads("-D_REENTRANT"),
|
|
lflags => "-Wl,-search_paths_first",
|
|
sys_id => "MACOSX",
|
|
bn_ops => "BN_LLONG RC4_CHAR",
|
|
thread_scheme => "pthreads",
|
|
perlasm_scheme => "osx32",
|
|
dso_scheme => "dlfcn",
|
|
ranlib => "ranlib -c",
|
|
shared_target => "darwin-shared",
|
|
shared_cflag => "-fPIC",
|
|
shared_extension => ".\$(SHLIB_VERSION_NUMBER).dylib",
|
|
},
|
|
# Option "freeze" such as -std=gnu9x can't negatively interfere
|
|
# with future defaults for below two targets, because MacOS X
|
|
# for PPC has no future, it was discontinued by vendor in 2009.
|
|
"darwin-ppc-cc" => {
|
|
inherit_from => [ "darwin-common", asm("ppc32_asm") ],
|
|
cflags => add("-arch ppc -std=gnu9x -Wa,-force_cpusubtype_ALL"),
|
|
lib_cppflags => add("-DB_ENDIAN"),
|
|
shared_cflag => add("-fno-common"),
|
|
perlasm_scheme => "osx32",
|
|
},
|
|
"darwin64-ppc-cc" => {
|
|
inherit_from => [ "darwin-common", asm("ppc64_asm") ],
|
|
cflags => add("-arch ppc64 -std=gnu9x"),
|
|
lib_cppflags => add("-DB_ENDIAN"),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
|
|
perlasm_scheme => "osx64",
|
|
},
|
|
"darwin-i386-cc" => {
|
|
inherit_from => [ "darwin-common", asm("x86_asm") ],
|
|
CFLAGS => add(picker(release => "-fomit-frame-pointer")),
|
|
cflags => add("-arch i386"),
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
bn_ops => "BN_LLONG RC4_INT",
|
|
perlasm_scheme => "macosx",
|
|
},
|
|
"darwin64-x86_64-cc" => {
|
|
inherit_from => [ "darwin-common", asm("x86_64_asm") ],
|
|
CFLAGS => add("-Wall"),
|
|
cflags => add("-arch x86_64"),
|
|
lib_cppflags => add("-DL_ENDIAN"),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
perlasm_scheme => "macosx",
|
|
},
|
|
|
|
##### GNU Hurd
|
|
"hurd-x86" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
inherit_from => [ asm("x86_elf_asm") ],
|
|
CC => "gcc",
|
|
CFLAGS => "-O3 -fomit-frame-pointer -Wall",
|
|
cflags => threads("-pthread"),
|
|
lib_cppflags => "-DL_ENDIAN",
|
|
ex_libs => add("-ldl", threads("-pthread")),
|
|
bn_ops => "BN_LLONG",
|
|
thread_scheme => "pthreads",
|
|
dso_scheme => "dlfcn",
|
|
shared_target => "linux-shared",
|
|
shared_cflag => "-fPIC",
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
},
|
|
|
|
##### VxWorks for various targets
|
|
"vxworks-ppc60x" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "ccppc",
|
|
CFLAGS => "-O2 -Wall -fstrength-reduce",
|
|
cflags => "-mrtp -mhard-float -mstrict-align -fno-implicit-fp -fno-builtin -fno-strict-aliasing",
|
|
cppflags => combine("-D_REENTRANT -DPPC32_fp60x -DCPU=PPC32",
|
|
"_DTOOL_FAMILY=gnu -DTOOL=gnu",
|
|
"-I\$(WIND_BASE)/target/usr/h",
|
|
"-I\$(WIND_BASE)/target/usr/h/wrn/coreip"),
|
|
sys_id => "VXWORKS",
|
|
lflags => add("-L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/common"),
|
|
ex_libs => add("-Wl,--defsym,__wrs_rtp_base=0xe0000000"),
|
|
},
|
|
"vxworks-ppcgen" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "ccppc",
|
|
CFLAGS => "-O1 -Wall",
|
|
cflags => "-mrtp -msoft-float -mstrict-align -fno-builtin -fno-strict-aliasing",
|
|
cppflags => combine("-D_REENTRANT -DPPC32 -DCPU=PPC32",
|
|
"-DTOOL_FAMILY=gnu -DTOOL=gnu",
|
|
"-I\$(WIND_BASE)/target/usr/h",
|
|
"-I\$(WIND_BASE)/target/usr/h/wrn/coreip"),
|
|
sys_id => "VXWORKS",
|
|
lflags => add("-L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/sfcommon"),
|
|
ex_libs => add("-Wl,--defsym,__wrs_rtp_base=0xe0000000"),
|
|
},
|
|
"vxworks-ppc405" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "ccppc",
|
|
CFLAGS => "-g",
|
|
cflags => "-msoft-float -mlongcall",
|
|
cppflags => combine("-D_REENTRANT -DPPC32 -DCPU=PPC405",
|
|
"-DTOOL_FAMILY=gnu -DTOOL=gnu",
|
|
"-I\$(WIND_BASE)/target/h"),
|
|
sys_id => "VXWORKS",
|
|
lflags => add("-r"),
|
|
},
|
|
"vxworks-ppc750" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "ccppc",
|
|
CFLAGS => "-ansi -fvolatile -Wall \$(DEBUG_FLAG)",
|
|
cflags => "-nostdinc -fno-builtin -fno-for-scope -fsigned-char -msoft-float -mlongcall",
|
|
cppflags => combine("-DPPC750 -D_REENTRANT -DCPU=PPC604",
|
|
"-I\$(WIND_BASE)/target/h"),
|
|
sys_id => "VXWORKS",
|
|
lflags => add("-r"),
|
|
},
|
|
"vxworks-ppc750-debug" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "ccppc",
|
|
CFLAGS => "-ansi -fvolatile -Wall -g",
|
|
cflags => "-nostdinc -fno-builtin -fno-for-scope -fsigned-char -msoft-float -mlongcall",
|
|
cppflags => combine("-DPPC750 -D_REENTRANT -DCPU=PPC604",
|
|
"-DPEDANTIC -DDEBUG",
|
|
"-I\$(WIND_BASE)/target/h"),
|
|
sys_id => "VXWORKS",
|
|
lflags => add("-r"),
|
|
},
|
|
"vxworks-ppc860" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "ccppc",
|
|
cflags => "-nostdinc -msoft-float",
|
|
cppflags => combine("-DCPU=PPC860 -DNO_STRINGS_H",
|
|
"-I\$(WIND_BASE)/target/h"),
|
|
sys_id => "VXWORKS",
|
|
lflags => add("-r"),
|
|
},
|
|
"vxworks-simlinux" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => "ccpentium",
|
|
cflags => "-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -fno-builtin -fno-defer-pop",
|
|
cppflags => combine("-D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\"",
|
|
"-DL_ENDIAN -DCPU=SIMLINUX -DNO_STRINGS_H",
|
|
"-DTOOL_FAMILY=gnu -DTOOL=gnu",
|
|
"-DOPENSSL_NO_HW_PADLOCK",
|
|
"-I\$(WIND_BASE)/target/h",
|
|
"-I\$(WIND_BASE)/target/h/wrn/coreip"),
|
|
sys_id => "VXWORKS",
|
|
lflags => add("-r"),
|
|
ranlib => "ranlibpentium",
|
|
},
|
|
"vxworks-mips" => {
|
|
inherit_from => [ "BASE_unix", asm("mips32_asm") ],
|
|
CC => "ccmips",
|
|
CFLAGS => "-O -G 0",
|
|
cflags => "-mrtp -mips2 -B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -msoft-float -mno-branch-likely -fno-builtin -fno-defer-pop",
|
|
cppflags => combine("-D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\"",
|
|
"-DCPU=MIPS32 -DNO_STRINGS_H",
|
|
"-DTOOL_FAMILY=gnu -DTOOL=gnu",
|
|
"-DOPENSSL_NO_HW_PADLOCK",
|
|
threads("-D_REENTRANT"),
|
|
"-I\$(WIND_BASE)/target/h",
|
|
"-I\$(WIND_BASE)/target/h/wrn/coreip"),
|
|
sys_id => "VXWORKS",
|
|
lflags => add("-L \$(WIND_BASE)/target/usr/lib/mips/MIPSI32/sfcommon"),
|
|
ex_libs => add("-Wl,--defsym,__wrs_rtp_base=0xe0000000"),
|
|
thread_scheme => "pthreads",
|
|
perlasm_scheme => "o32",
|
|
ranlib => "ranlibmips",
|
|
},
|
|
|
|
#### uClinux
|
|
"uClinux-dist" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => sub { env('CC') },
|
|
cppflags => threads("-D_REENTRANT"),
|
|
ex_libs => add("\$(LDLIBS)"),
|
|
bn_ops => "BN_LLONG",
|
|
thread_scheme => "pthreads",
|
|
dso_scheme => sub { env('LIBSSL_dlfcn') },
|
|
shared_target => "linux-shared",
|
|
shared_cflag => "-fPIC",
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
ranlib => sub { env('RANLIB') },
|
|
},
|
|
"uClinux-dist64" => {
|
|
inherit_from => [ "BASE_unix" ],
|
|
CC => sub { env('CC') },
|
|
cppflags => threads("-D_REENTRANT"),
|
|
ex_libs => add("\$(LDLIBS)"),
|
|
bn_ops => "SIXTY_FOUR_BIT_LONG",
|
|
thread_scheme => "pthreads",
|
|
dso_scheme => sub { env('LIBSSL_dlfcn') },
|
|
shared_target => "linux-shared",
|
|
shared_cflag => "-fPIC",
|
|
shared_extension => ".so.\$(SHLIB_VERSION_NUMBER)",
|
|
ranlib => sub { env('RANLIB') },
|
|
},
|
|
|
|
##### VMS
|
|
# Most things happen in vms-generic.
|
|
# Note that vms_info extracts the pointer size from the end of
|
|
# the target name, and will assume that anything matching /-p\d+$/
|
|
# indicates the pointer size setting for the desired target.
|
|
"vms-generic" => {
|
|
inherit_from => [ "BASE_VMS" ],
|
|
template => 1,
|
|
CC => "CC/DECC",
|
|
CPP => '$(CC)/PREPROCESS_ONLY=SYS$OUTPUT:',
|
|
CFLAGS =>
|
|
combine(picker(default => "/STANDARD=(ISOC94,RELAXED)/NOLIST/PREFIX=ALL",
|
|
debug => "/NOOPTIMIZE/DEBUG",
|
|
release => "/OPTIMIZE/NODEBUG"),
|
|
sub { my @warnings =
|
|
@{vms_info()->{disable_warns}};
|
|
@warnings
|
|
? "/WARNINGS=DISABLE=(".join(",",@warnings).")" : (); }),
|
|
lib_defines =>
|
|
add("OPENSSL_USE_NODELETE",
|
|
sub {
|
|
return vms_info()->{def_zlib}
|
|
? "LIBZ=\"\"\"".vms_info()->{def_zlib}."\"\"\"" : ();
|
|
}),
|
|
lflags => picker(default => "/MAP='F\$PARSE(\".MAP\",\"\$\@\")'",
|
|
debug => "/DEBUG/TRACEBACK",
|
|
release => "/NODEBUG/NOTRACEBACK"),
|
|
lib_cflags => add("/NAMES=(AS_IS,SHORTENED)/EXTERN_MODEL=STRICT_REFDEF"),
|
|
# no_inst_lib_cflags is used instead of lib_cflags by descrip.mms.tmpl
|
|
# for object files belonging to selected internal libraries
|
|
no_inst_lib_cflags => "",
|
|
ex_libs => add(sub { return vms_info()->{zlib} || (); }),
|
|
shared_target => "vms-shared",
|
|
dso_scheme => "vms",
|
|
thread_scheme => "pthreads",
|
|
|
|
AS => sub { vms_info()->{AS} },
|
|
ASFLAGS => sub { vms_info()->{ASFLAGS} },
|
|
asoutflag => sub { vms_info()->{asoutflag} },
|
|
asflags => sub { vms_info()->{asflags} },
|
|
perlasm_scheme => sub { vms_info()->{perlasm_scheme} },
|
|
|
|
disable => add('pinshared'),
|
|
|
|
apps_aux_src => "vms_term_sock.c",
|
|
apps_init_src => "vms_decc_init.c",
|
|
},
|
|
|
|
# From HELP CC/POINTER_SIZE:
|
|
#
|
|
# ----------
|
|
# LONG[=ARGV] The compiler assumes 64-bit pointers. If the ARGV option to
|
|
# LONG or 64 is present, the main argument argv will be an
|
|
# array of long pointers instead of an array of short pointers.
|
|
#
|
|
# 64[=ARGV] Same as LONG.
|
|
# ----------
|
|
#
|
|
# We don't want the hassle of dealing with 32-bit pointers with argv, so
|
|
# we force it to have 64-bit pointers, see the added cflags in the -p64
|
|
# config targets below.
|
|
|
|
"vms-alpha" => {
|
|
inherit_from => [ "vms-generic" ],
|
|
bn_ops => "SIXTY_FOUR_BIT RC4_INT",
|
|
pointer_size => "",
|
|
},
|
|
"vms-alpha-p32" => {
|
|
inherit_from => [ "vms-alpha" ],
|
|
cflags => add("/POINTER_SIZE=32"),
|
|
pointer_size => "32",
|
|
},
|
|
"vms-alpha-p64" => {
|
|
inherit_from => [ "vms-alpha" ],
|
|
cflags => add("/POINTER_SIZE=64=ARGV"),
|
|
pointer_size => "64",
|
|
},
|
|
"vms-ia64" => {
|
|
inherit_from => [ "vms-generic",
|
|
sub { vms_info()->{AS}
|
|
? asm("ia64_asm")->() : () } ],
|
|
bn_ops => "SIXTY_FOUR_BIT RC4_INT",
|
|
pointer_size => "",
|
|
|
|
modes_asm_src => "", # Because ghash-ia64.s doesn't work on VMS
|
|
},
|
|
"vms-ia64-p32" => {
|
|
inherit_from => [ "vms-ia64" ],
|
|
cflags => add("/POINTER_SIZE=32"),
|
|
pointer_size => "32",
|
|
},
|
|
"vms-ia64-p64" => {
|
|
inherit_from => [ "vms-ia64" ],
|
|
cflags => add("/POINTER_SIZE=64=ARGV"),
|
|
pointer_size => "64",
|
|
},
|
|
|
|
);
|