server/lib/l10n/zh_TW.json

149 lines
15 KiB
JSON
Raw Normal View History

{ "translations": {
"Cannot write into \"config\" directory!" : "無法寫入 config 目錄!",
"This can usually be fixed by giving the webserver write access to the config directory" : "允許網頁伺服器寫入設定目錄通常可以解決這個問題",
"See %s" : "見 %s",
"This can usually be fixed by %sgiving the webserver write access to the config directory%s." : "%s允許網頁伺服器寫入設定目錄%s通常可以解決這個問題",
"Sample configuration detected" : "偵測到範本設定",
"It has been detected that the sample configuration has been copied. This can break your installation and is unsupported. Please read the documentation before performing changes on config.php" : "看來您直接複製了範本設定來使用,這可能會毀掉你的安裝,請閱讀說明文件後對 config.php 進行適當的修改",
2014-12-05 06:55:52 +00:00
"PHP %s or higher is required." : "需要 PHP %s 或更高版本",
2015-10-29 05:55:45 +00:00
"PHP with a version lower than %s is required." : "需要 PHP 版本低於 %s ",
"Following databases are supported: %s" : "這些資料庫支援: %s",
"The command line tool %s could not be found" : "無法找到命令提示位元工具 %s",
"The library %s is not available." : "套件庫 %s 無法使用",
"Library %s with a version higher than %s is required - available version %s." : "需要套件庫 %s 版本高於 %s - 可使用的版本是 %s",
"Library %s with a version lower than %s is required - available version %s." : "需要套件庫 %s 版本低於 %s - 可使用的版本是 %s",
"Following platforms are supported: %s" : "這些平台支援: %s",
"Unknown filetype" : "未知的檔案類型",
"Invalid image" : "無效的圖片",
2014-12-11 06:55:27 +00:00
"today" : "今天",
"yesterday" : "昨天",
2015-10-29 05:55:45 +00:00
"_%n day ago_::_%n days ago_" : ["%n 天前"],
2014-12-11 06:55:27 +00:00
"last month" : "上個月",
"_%n month ago_::_%n months ago_" : ["%n 個月前"],
"last year" : "去年",
2015-10-29 05:55:45 +00:00
"_%n year ago_::_%n years ago_" : ["%n 幾年前"],
2014-12-11 06:55:27 +00:00
"_%n hour ago_::_%n hours ago_" : ["%n 小時前"],
"_%n minute ago_::_%n minutes ago_" : ["%n 分鐘前"],
"seconds ago" : "幾秒前",
2015-10-29 05:55:45 +00:00
"Module with id: %s does not exist. Please enable it in your apps settings or contact your administrator." : "模組編號: %s 不存在,請在應用程式設定中開啟,或是聯絡系統管理員",
"Empty filename is not allowed" : "不允許空白的檔名",
2016-02-12 06:56:04 +00:00
"Dot files are not allowed" : "不允許小數點開頭的檔案",
2015-10-29 05:55:45 +00:00
"4-byte characters are not supported in file names" : "檔案名稱不支援4位元的字元",
2015-10-30 05:55:52 +00:00
"File name is a reserved word" : "檔案名稱是預設保留字",
2015-08-25 16:39:10 +00:00
"File name contains at least one invalid character" : "檔案名稱含有不合法的字元",
2015-10-30 05:55:52 +00:00
"File name is too long" : "檔案名稱太長",
2016-05-04 06:11:59 +00:00
"App directory already exists" : "應用程式目錄已經存在",
"Can't create app folder. Please fix permissions. %s" : "無法建立應用程式目錄,請檢查權限:%s",
"No source specified when installing app" : "沒有指定應用程式安裝來源",
"No href specified when installing app from http" : "從 http 安裝應用程式,找不到 href 屬性",
"No path specified when installing app from local file" : "從本地檔案安裝應用程式時沒有指定路徑",
"Archives of type %s are not supported" : "不支援 %s 格式的壓縮檔",
"Failed to open archive when installing app" : "安裝應用程式時無法開啓壓縮檔",
"App does not provide an info.xml file" : "應用程式沒有提供 info.xml 檔案",
"Signature could not get checked. Please contact the app developer and check your admin screen." : "無法驗證數位簽章,請聯絡 app 開發者,並檢查您的管理頁面",
"App can't be installed because of not allowed code in the App" : "無法安裝應用程式因為在當中找到危險的代碼",
"App can't be installed because it contains the <shipped>true</shipped> tag which is not allowed for non shipped apps" : "無法安裝應用程式,因為它包含了 <shipped>true</shipped> 標籤,在未發行的應用程式當中這是不允許的",
2016-04-30 05:55:54 +00:00
"%s enter the database username." : "%s 輸入資料庫使用者名稱。",
"%s enter the database name." : "%s 輸入資料庫名稱。",
"%s you may not use dots in the database name" : "%s 資料庫名稱不能包含小數點",
"Oracle connection could not be established" : "無法建立 Oracle 資料庫連線",
"Oracle username and/or password not valid" : "Oracle 用戶名和/或密碼無效",
"DB Error: \"%s\"" : "資料庫錯誤:\"%s\"",
"Offending command was: \"%s\"" : "有問題的指令是:\"%s\"",
"You need to enter either an existing account or the administrator." : "您必須輸入一個現有的帳號或管理員帳號。",
"Offending command was: \"%s\", name: %s, password: %s" : "有問題的指令是:\"%s\" ,使用者:\"%s\",密碼:\"%s\"",
"PostgreSQL username and/or password not valid" : "PostgreSQL 用戶名和/或密碼無效",
"Mac OS X is not supported and %s will not work properly on this platform. Use it at your own risk! " : "不支援 Mac OS X 而且 %s 在這個平台上面無法正常運作,請自行衡量風險!",
"For the best results, please consider using a GNU/Linux server instead." : "請考慮使用 GNU/Linux 伺服器以取得最好的效果",
"It seems that this %s instance is running on a 32-bit PHP environment and the open_basedir has been configured in php.ini. This will lead to problems with files over 4 GB and is highly discouraged." : "看起來 %s 是在32位元的PHP環境運行而php.ini 有設置 open_basedir這個參數當檔案大小超過4GB時可能會發生問題強烈建議您更改設定。",
"Please remove the open_basedir setting within your php.ini or switch to 64-bit PHP." : "請移除 php.ini 中的 open_basedir 設定或是改用64位元的PHP",
"Set an admin username." : "設定管理員帳號。",
"Set an admin password." : "設定管理員密碼。",
"Can't create or write into the data directory %s" : "無法建立或寫入資料目錄 %s",
2015-10-30 05:55:52 +00:00
"Invalid Federated Cloud ID" : "無效的雲端聯盟ID:",
"%s shared »%s« with you" : "%s 與您分享了 %s",
2016-01-13 06:55:56 +00:00
"%s via %s" : "%s 經由 %s",
2015-10-30 05:55:52 +00:00
"Sharing %s failed, because the backend does not allow shares from type %i" : "分享 %s失敗不允許分享這樣的 %i 類別",
"Sharing %s failed, because the file does not exist" : "分享 %s 失敗,因為檔案不存在",
2016-05-04 06:11:59 +00:00
"You are not allowed to share %s" : "你不被允許分享 %s",
2015-10-30 05:55:52 +00:00
"Sharing %s failed, because you can not share with yourself" : "分享 %s 失敗,不能分享給自己哦",
"Sharing %s failed, because the user %s does not exist" : "分享 %s 失敗,因為使用者 %s 不存在",
"Sharing %s failed, because the user %s is not a member of any groups that %s is a member of" : "分享 %s 失敗,使用者 %s 並不屬於該項目擁有者 %s 所隸屬的任何一個群組",
"Sharing %s failed, because this item is already shared with %s" : "分享 %s 失敗,因為此項目目前已經與 %s 分享",
2015-10-30 05:55:52 +00:00
"Sharing %s failed, because this item is already shared with user %s" : "分享 %s 失敗,因為此項目目前已經與 %s 分享",
"Sharing %s failed, because the group %s does not exist" : "分享 %s 失敗,因為群組 %s 不存在",
"Sharing %s failed, because %s is not a member of the group %s" : "分享 %s 失敗,因為 %s 不是群組 %s 的一員",
"You need to provide a password to create a public link, only protected links are allowed" : "您必須為公開連結設定一組密碼,我們只允許受密碼保護的連結",
"Sharing %s failed, because sharing with links is not allowed" : "分享 %s 失敗,因為目前不允許使用連結分享",
2016-02-12 06:56:04 +00:00
"Not allowed to create a federated share with the same user" : "不允許與同一個使用者建立聯盟式分享",
2015-10-30 05:55:52 +00:00
"Sharing %s failed, could not find %s, maybe the server is currently unreachable." : "分享%s失敗找不到%s或許目前無法連線到該伺服器",
"Share type %s is not valid for %s" : "分享類型 %s 對於 %s 來說無效",
"Setting permissions for %s failed, because the permissions exceed permissions granted to %s" : "為 %s 設定權限失敗,因為欲設定的權限超出開放給 %s 的範圍",
"Setting permissions for %s failed, because the item was not found" : "為 %s 設定權限失敗,因為找不到該項目",
"Cannot set expiration date. Shares cannot expire later than %s after they have been shared" : "無法設定到期日,在分享之後,到期日不能設定為 %s 之後",
"Cannot set expiration date. Expiration date is in the past" : "無法設定過去的日期為到期日",
2015-10-30 05:55:52 +00:00
"Cannot clear expiration date. Shares are required to have an expiration date." : "到期日期不能空白,必須設定到期日才才能分享",
"Sharing backend %s must implement the interface OCP\\Share_Backend" : "分享後端 %s 必須實作 OCP\\Share_Backend interface",
"Sharing backend %s not found" : "找不到分享後端 %s",
"Sharing backend for %s not found" : "找不到 %s 的分享後端",
2015-10-30 05:55:52 +00:00
"Sharing failed, because the user %s is the original sharer" : "分享失敗,因為使用者 %s 即是原本的分享者",
"Sharing %s failed, because the permissions exceed permissions granted to %s" : "分享 %s 失敗,因為權限設定超出了授權給 %s 的範圍",
"Sharing %s failed, because resharing is not allowed" : "分享 %s 失敗,不允許重複分享",
"Sharing %s failed, because the sharing backend for %s could not find its source" : "分享 %s 失敗,因為 %s 的分享後端找不到它的來源",
"Sharing %s failed, because the file could not be found in the file cache" : "分享 %s 失敗,因為在快取中找不到該檔案",
2016-05-04 06:11:59 +00:00
"Cannot increase permissions of %s" : "無法增加%s的權限",
"Expiration date is in the past" : "到期日是之前的時間",
"Cannot set expiration date more than %s days in the future" : "無法設定到期日超過未來%s天",
"Could not find category \"%s\"" : "找不到分類:\"%s\"",
"Apps" : "應用程式",
2016-05-12 06:08:58 +00:00
"Only the following characters are allowed in a username: \"a-z\", \"A-Z\", \"0-9\", and \"_.@-'\"" : "使用者名稱當中只能包含下列字元:\"a-z\", \"A-Z\", \"0-9\", 和 \"_.@-'\"",
"A valid username must be provided" : "必須提供一個有效的用戶名",
"Username contains whitespace at the beginning or at the end" : "使用者名詞的開頭或結尾有空白",
"A valid password must be provided" : "一定要提供一個有效的密碼",
"The username is already being used" : "這個使用者名稱已經有人使用了",
2016-05-04 06:11:59 +00:00
"Personal" : "個人",
"Users" : "使用者",
"Admin" : "管理",
"Recommended" : "建議",
"App \"%s\" cannot be installed because the following dependencies are not fulfilled: %s" : "應用程式 \"%s\" 無法被安裝,下列的相依性並不是完整的: %s",
"No app name specified" : "沒有指定應用程式名稱",
"File is currently busy, please try again later" : "檔案目前忙碌中,請稍候再試",
"Can't read file" : "無法讀取檔案",
"Application is not enabled" : "應用程式未啟用",
"Authentication error" : "認證錯誤",
"Token expired. Please reload page." : "Token 過期,請重新整理頁面。",
"Unknown user" : "未知的使用者",
"No database drivers (sqlite, mysql, or postgresql) installed." : "沒有安裝資料庫驅動程式 (sqlite, mysql, 或 postgresql)",
2015-10-30 05:55:52 +00:00
"Microsoft Windows Platform is not supported" : "不支援微軟Windows系統",
"Cannot write into \"config\" directory" : "無法寫入 config 目錄",
"Cannot write into \"apps\" directory" : "無法寫入 apps 目錄",
"This can usually be fixed by %sgiving the webserver write access to the apps directory%s or disabling the appstore in the config file." : "通常藉由%s開放網頁伺服器對 apps 目錄的權限%s或是在設定檔中關閉 appstore 就可以修正這個問題",
"Cannot create \"data\" directory (%s)" : "無法建立 data 目錄 (%s)",
2015-02-17 06:56:23 +00:00
"Permissions can usually be fixed by %sgiving the webserver write access to the root directory%s." : "通常藉由%s開放網頁伺服器對根目錄的權限%s就可以修正權限問題",
"Setting locale to %s failed" : "設定語系為 %s 失敗",
"Please install one of these locales on your system and restart your webserver." : "請在系統中安裝這些語系的其中一個,然後重啓網頁伺服器",
"Please ask your server administrator to install the module." : "請詢問系統管理員來安裝這些模組",
"PHP module %s not installed." : "未安裝 PHP 模組 %s",
2015-10-30 05:55:52 +00:00
"PHP setting \"%s\" is not set to \"%s\"." : "PHP設定值 \"%s\" 沒有被設定為 \"%s\"",
"mbstring.func_overload is set to \"%s\" instead of the expected value \"0\"" : "mbstring.func_overload 應該要被設定成 \"0\"而不是目前的設定 \"%s\" ",
"To fix this issue set <code>mbstring.func_overload</code> to <code>0</code> in your php.ini" : "為了修正這個問題請到php.ini將 <code>mbstring.func_overload</code> 的值改為 <code>0</code>",
2016-02-12 06:56:04 +00:00
"PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP 已經設定成「剪除 inline doc block」模式這將會使幾個核心應用程式無法使用",
2016-01-12 06:56:33 +00:00
"This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "這大概是由快取或是加速器像是 Zend OPcache, eAccelerator 造成的",
"PHP modules have been installed, but they are still listed as missing?" : "你已經安裝了指定的 PHP 模組,可是還是顯示為找不到嗎?",
"Please ask your server administrator to restart the web server." : "請聯絡您的系統管理員重新啟動網頁伺服器",
"PostgreSQL >= 9 required" : "需要 PostgreSQL 版本 >= 9",
"Please upgrade your database version" : "請升級您的資料庫版本",
"Please change the permissions to 0770 so that the directory cannot be listed by other users." : "請將該目錄權限設定為 0770 ,以免其他使用者讀取",
"Data directory (%s) is readable by other users" : "資料目錄 (%s) 可以被其他使用者讀取",
2015-10-30 05:55:52 +00:00
"Data directory (%s) must be an absolute path" : "資料夾目錄(%s) 必須式絕對路徑",
"Check the value of \"datadirectory\" in your configuration" : "請檢查您的設定檔中 \"datadirectory\" 的值",
"Data directory (%s) is invalid" : "資料目錄 (%s) 無效",
"Please check that the data directory contains a file \".ocdata\" in its root." : "請確保資料目錄當中包含一個 .ocdata 的檔案",
2015-11-11 06:55:47 +00:00
"Could not obtain lock type %d on \"%s\"." : "無法取得鎖定:類型 %d ,檔案 %s",
2016-01-14 06:55:43 +00:00
"Storage unauthorized. %s" : "儲存空間未經授權。%s",
"Storage incomplete configuration. %s" : "儲存空間配置尚未完成。%s",
"Storage connection error. %s" : "儲存空間連線錯誤。%s",
"Storage not available" : "無法存取儲存空間",
"Storage connection timeout. %s" : "儲存空間連線逾時。%s"
},"pluralForm" :"nplurals=1; plural=0;"
}