"getTotalWidth" is not more accurate; it is simply not clamped.
Moreover, "width/outerWidth" could be used in tests too, and also even
if "getTotalWidth" could be used in tests while others not that would
not be something to be stated in the API documentation, but in a
comment.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
After the changes in the previous commit "_showCrumb" no longer shows
the menu, only the same crumb that was hidden by the last call to
"_hideCrumb". Therefore, if the crumb was hidden because it did not fit
there is no need to try to show it again, as it will still not fit.
Moreover, the calculated width for a hidden element is not always
accurate; in some cases the calculated width is lower than the actual
width (it happens, for example, when using a background image like the
"Share" icon), which causea the crumb to be shown even if there is not
enough room, which in the end causes the siblings to overflow the
contents.
No unit tests for this one, though; you will have to trust me on this,
sorry ;-)
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The crumb for the menu was shown like any other crumb when calling
"_showCrumb", but it was also shown when other crumbs were hidden
without taking into account the available width. This caused several
related problems, like the breadcrumbs taking too much space when the
menu was sometimes shown after the rest of the crumbs were adjusted to
the available width, or the menu being shown instead of the last crumb
even if there was room for it when the available width was increased.
Now the menu is always hidden before starting the resizing of the crumbs
to ensure that whether it was previously shown or not does not affect
the result. In a similar way, the menu will no longer be shown by
"_showCrumb", as it is not a regular crumb that has to be shown simply
if there is enough room. The menu is now shown as soon as any other
crumb is hidden; this ensures that the menu width will be taken into
account in further width checks. As when _updateMenu" is called it no
longer needs to take care of showing the menu this fixes the issue
revealed when fixing the test setup in the previous commit.
Finally, this implicitly fixes the failure in the breadcrumbs tests when
run on Firefox, as it was caused by the menu interfering in the
calculations of the other crumbs when increasing the width.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When calculating the total width of the crumbs only its padding was
taken into account; now the margin is too. In a similar way, before
showing a crumb only its width was taken into account; now its padding
and margin are taken into account too.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When the parent element of the breadcrumbs was resized to a larger width
and the siblings of the breadcrumbs expanded to fill all the available
width some crumbs could be hidden even if there was enough room for
them. The reason was that the width of the siblings being used to
calculate the available width for the breadcrumbs was the expanded width
of the siblings. Now as many crumbs as possible (that is, fitting in the
parent, no matter the siblings) are first shown so the expanding
siblings are compressed before calculating the available width.
Due to the lack of support for flexboxes in PhantomJS the related unit
test is skipped; it has to be run in other browser, like Firefox.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Other apps could add elements to the controls outside the creatable
actions div (for example, the button to switch to the gallery), so the
widths of all the visible siblings of the breadcrumbs have to be taken
into account in the size calculations.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
There are some differences in width handling between the browsers used
to run the tests, most likely due to their support (or lack of) of
certain CSS features: PhantomJS requires "width" to be set (probably
because it does not handle flex displays and treats it like a block, so
"min-width" does not matter in this case), while Firefox requires
"min-width" to be set (otherwise the children of "#controls" could be
compressed due to its use of flex display and the elements would end
with a different width than the one needed for the tests). Due to all
that the width of the breadcrumb siblings must be specified in the tests
using both "width" and "min-width".
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The "usedWidth" attribute was not used elsewhere outside the "_resize"
method, so it was replaced with a local variable. Moreover, it was also
renamed to a more suitable name ("availableWidth").
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Setting the width of the parent element of the breadcrumbs and then
explicitly calling "_resize" is enough to test the resizing behaviour.
This makes possible to remove the "setMaxWidth" method and its related
code, which was used only for testing purposes.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The new 'Move and copy' operation from #6040 requires UPDATE permissions
on the selected files. However, READ would be sufficient to create a
copy of a file (if not viewed as a public share). For this reason this patch:
- changes the permission of the 'MoveCopy' action to PERMISSION_READ
- changes the label of the action depending on the permissions
- changes the available buttons in the Move/Copy dialog depending on the
permissions.
The same changes are done to the filelist view for bulk actions.
Signed-off-by: Roland Tapken <roland@bitarbeiter.net>
"FileList._updateDetailsView" expects either a file name (as a string)
or a file model (as an "OCA.File.FileInfoModel"), but when called
through "updateInList" an "OC.Files.FileInfo" object was given instead.
As the given attribute was not a model "_updateDetailsView" treated it
as a file name and tried to get the model for that file, which failed
and caused the details view to be emptied.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When the favourite icon in the details view is clicked the "Favorite"
action is triggered. However, if the action name given to
"triggerAction" is not found then the "Download" action is triggered
instead. As the "Favorite" action is not available in some file lists
(like "Recents") the "Download" action was executed instead in those
cases, which was a strange behaviour. Now the favourite icon is
hidden if its action is not available.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When an empty area of a file row was clicked and the "Details" action
was executed "fileActions.currentFile" was not guaranteed to be set to
the appropriate object (it depended on the previous actions of the
user), so when it was used by "getCurrentMimeType()" and other
FileActions functions they may not work as expected. Now it is
explicitly set to the appropriate value before its use.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Clicking on an empty space in a file row causes the details view to be
shown. As it is a user initiated action on the file list now it is done
by triggering the Details action instead of directly calling
"_updateDetailsView"; the result is the same in both cases, but using
the action is more consistent (clicking on the file name triggers the
default action, and clicking on the inline actions triggers those
actions) and also makes possible to use the "beforeTriggerAction" and
"afterTriggerAction" listeners.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
In the same way that other elements can know when a FileAction is
registered or a default action is set this commit makes possible to be
notified before and after a FileAction is executed.
This is achieved by wrapping the registered action handler in a custom
function that notifies the listeners before and after executing the
handler itself. Due to this approach only FileActions registered through
"registerAction" trigger the events, although that is not a problem as
this is how the actions should be added to the FileActions anyway.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When a file from the file list is dragged a drag shadow (a copy of the
file row that follows the cursor position) is created. The drag shadow
element is created as a direct child of the body element, so it needs a
higher "z-index" than the one used for the file list to be visible.
In narrow screens the "#app-content" uses a "z-index" of 1000 in order
to be visible over the "#navigation-bar" when they overlap, so the
"z-index" of the drag shadow must be at least 1000 to be visible over
the file list.
Instead of updating the hardcoded "z-index" it was removed and replaced
by CSS rules for ".dragshadow" elements to ease theming.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
fileInfo is composed of data from sharing, however additional data is
pulled when sidebar opens, e.g. the size. Then, existing data is
overwritten by data from the other source (files). The data points that
would be lost are not dirty however and still used, so we keep them.
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
In case of error, instead of a generic error message, an upload will
display whichever message is returned in the Sabre Exception, if
applicable.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
This commit adds chunked uploads in the Web UI (for authenticated users,
but not for public uploads). To do that the server endpoint used by the
uploader is changed from WebDAV v1 to WebDAV v2. The chunking itself is
done automatically by the jQuery-File-Upload plugin when the
"maxChunkSize" parameter is set; in "fileuploadchunksend" the request is
adjusted to adapt the behaviour of the plugin to the one expected by
"uploads/" in WebDAV v2.
The chunk size to be used by the Web UI can be set in the
"max_chunk_size" parameter of the Files app configuration. By default it
is set to 10MiB.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The Details and the Favorite actions do not require any permission on
the files to be performed.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Now a file gets its directory permissions only if it contained no
permissions (they were undefined or null), but not if its permissions
were set to "NONE".
Besides that, now file actions that do not require any permission on the
file to be performed can be used on files that have no permissions.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When several files are selected and one of them can not be deleted the
"Delete" file action is not shown in the summary. This commit extends
that behaviour too to the other file actions in the summary ("Move or
copy" and "Download"), so now an action is shown in the summary only if
it can be executed on all the currently selected files.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The selection column is not only a visual column, but also a real column
of the file list table. Unlike other columns whose width is reduced in
space constrained screens the selection column must stay the same so the
tapping area is large enough to be easily usable
The selection column does not appear in the search results table, so its
contents have to be explicitly aligned with those of the main table
based on whether the main table has a selection column or not (using the
"has-selection" CSS class in the same way as the "has-favorite" CSS
class was being used when there was a column for favorite actions).
In the tests the ":visible" selector can no longer be used. That
selector matches elements with a width or height that is greater than
zero, but the dimensions calculated in the unit tests are not reliable;
the width of the link was zero before these changes, and now moving the
checkbox to its own column causes the height of the link to become zero
too, so it no longer matches the ":visible" selector even if it is not
hidden. As hidding and showing the link is based on its "display" CSS
property its value is the one checked now.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The "has-favorites" CSS class is no longer used after moving the
favorite mark to the top right corner of the thumbnail, so there is no
need to add it to the table.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The favorite icon was shown on its own "column" (not a real column in
the table, but a visual column achieved through margins and left
positions). Now the icon was moved to the top right corner of the file
thumbnail, and the thumbnail and file name were moved to the left to
fill the space left by the "column".
To keep the markup in line with its visual representation (and to ease
the placing through CSS), the favorite mark is no longer prepended to
the row, but appended to the thumbnail instead. In the same way, the
thumbnail is no longer appended to the checkbox label, but to the link
with the name of the file instead (although the checkbox is still shown
at the bottom right corner of the thumbnail, and clicking on the
thumbnail still selects the file). In order to show the "busy" state on
a file the "icon-loading-small" CSS class is set to the parent element
of the thumbnail, so the thumbnail is also wrapped now by another div
with the same size and position as the label.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
This is a preparatory step for a following commit in which the position
of the favorite icon and the checkbox will be swapped; in that new
design the favorite icon is no longer expected to be an action but just
a simple mark on whether the file is favorited or not (the action is
expected to be triggered then only from the file actions menu).
The favorite icon is now fully shown or completely hidden depending on
whether the file is favorited or not. As the icon is just informative
but no longer an action now it does not change when hovered or focus. In
the same way, the alternative text when the file is not favorited now it
is not "Favorite" (an action) but "Not favorited" instead.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The new FileAction for the menu is essentially the same as the old
inline FileAction, except for the rendering; in this case the FileAction
is shown in the menu in a standard way, so there is no need to provide a
custom renderer (although the menu entry text and icon change depending
on whether the file is currently a favorite or not, but that can be done
just with displayName and iconClass functions).
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Icon class function properties make possible to render a different icon
class depending on the context of the file action.
Inline file actions had support for them already and called them passing
the file name and context of the file action as parameters. Due to this
the FileActionsMenu passes those parameters too to icon class functions
instead of just the context like done for display name functions.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
If the estimated upload time is bigger than 4 hours it shows the text
"Uploading..." because the time then doesn't give any good hint to the
user anyways.
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
Just fetch the first 10kb. This should be more than enough in 99% of the
cases. And avoid downloading a 10mb text file just to display a tiny
portion.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
The sort comparator checks the "isFavorite" property of the FileInfo
objects to compare. That property is set when the file list is loaded
and the response from the server is parsed, and thus a freshly loaded
file list has the proper sorting for favorite files. However, the
property is not set in other cases, like when the FileInfo objects are
derived from FileInfoModels due to a file being marked as a favorite or
a text editor being closed, which causes the file to be sorted in the
wrong position.
There is no need to add the property in those situations, though; in all
cases the TagsPlugin adds a "tags" array property that contains an
OC.TAG_FAVORITE tag, so that tag can be checked instead of "isFavorite".
Moreover, although "isFavorite" was added by the main "_parseFileInfo"
function it did not really belong there but to the "FileInfoParser" from
the TagsPlugin; however, as that property now is not used anywhere it
was removed altogether.
A cleaner solution would have been to make the sort comparator
extensible by plugins like other behaviours of the file list and then
add the sorting logic related to favorite files to the TagsPlugin.
However, right now only the TagsPlugin would need to alter the main
sorting logic, and it seems like a corner case anyway. Even if it is
implemented as a plugin, favorite files is a core feature, so for the
time being it will be taken into account directly in the main sorting
logic; making the sort comparator extensible by plugins is defered until
there are other use cases for that.
Fixes#5410
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The unit of `data.bitrate` is bit, but the argument unit of
`humanFileSize` function is byte, so it should be divided by 8.
Signed-off-by: Yaojin Qian <i@ume.ink>
The upload remaining time is always 'a few second' whatever a big or a
small file uploading.
This commit fixes it. The `new Date().getMilliseconds()` only return a
three digits number. When time arrived the next second, the millisecond
start from ZERO again. So `new Date().getTime()` is the righe choice.
And remaining time variables shoule be initialized when the file starts
uploading, otherwise the remaining time of a new upload will always be
'Infinity years' until you refresh the page.
Signed-off-by: Yaojin Qian <i@ume.ink>
The post-render event makes possible to modify the
MainFileInfoDetailsView element once it has been rendered, which is
needed by OCA.SystemTags.FilesPlugin to add the "Tags" label to the file
details, while the pre-render event makes possible to detach added
elements if needed before the MainFileInfoDetailsView is rendered again,
as that removes the events from the child DOM elements even if they
belong to other views.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
In some cases, an app may need to act on a detail view registered by
another app or the core, for example, to add extra elements to the
element of the detail view.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Fixes: #4644
Without this patch the filelist would always reload. However since not
all the correct data was set yet it would often:
1. fireoff a propfind to ../webdav/
2. fireoff a propfind to ../webdav/<PATH>
When just opening the file list those are the same so the result is just
fine. However if opening a direct link it means that there is a race
condition on which finishes first.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
Whenever a file list is already initialized and was hidden when
switching to another file list in the navigation bar, if the user comes
back to this list it gets redisplayed. At this point the list needs to
be refreshed to be able to reflect any potential file changes done from
the other lists.
The Files app active view is set to "files" in silent mode to avoid an
unneeded load of the "/" directory. However, this also prevents the
details view from being automatically closed, so it has to be explicitly
closed by the Goto plugin; the approach used is the same that would have
been used by OCA.Files.App._onNavigationChanged if not silenced.
Fixes#1448
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The local link is a clever thing and the clients should support this imho but it might not be clear to all users. For one, the term 'local link' is a bit odd. Local with respect to what? It links directly to the file or folder, so direct link seems to make more sense to me. And we should explain the difference with a public link. So this PR:
* renames local link to direct link
* adds a short explanation, noting it only works for users who have access to this file/folder.
As other links are called public link you could also consider calling this 'private link', I suppose. But the links we sent by mail to ppl could also be called 'private link' (they are for one user, who git it by email) so I think it might be confusing. What do @nextcloud/designers think?
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
added quit option in notif in app.js
added quit option in notif in file-upload.js
added quit option in notif in fileinfomodel.js
added quit option in notif in filelist.js
added quit option in notif in filelist.js
added quit option in notif in tagsplugin.js
added quit option in notif in statusmanager.js
added quit option in notif in external.js
added quit option in notif in versionstabview.js
added quit option in notif in notification.js
changes according to the latest review.
timeout removed since there is a button to close it
translation capability added
typo fixed
test files updated
small errors fixed
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
test files against ignore_files list on upload
fix typo and indentation
Move blacklist declaration to lib/public/Files/FileInfo.php,
Rename *ignored to *blacklisted
Mocked blacklist_files for testing
Mocked blacklist_files for testing
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
check introduced at another method
comment added to explain one check
comment added to explain one check
unit tests added
small fixes in unit tests
missing semicolon added
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
* fixed size issues on main detail view and disappearing of share recipients
* Changes due to code comments
* Moved reloadProperties() to FileInfoModel
* Solved Scrutinizer issues
* Bugfix: undefined value used on error
* check if options are set for FileInfoModel.initialize()
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
* Style modifications of favorite star on main detail view
* Removed unused opacity change on mouse over
* favorite star title fixed
* favorite star opacity should always be .7
Signed-off-by: Lukas Reschke <lukas@statuscode.ch>
The file list UI logic that renders the next page doesn't properly
exclude hidden files when not shown. This fix makes sure that only rows
that are actually visible are counted when rendering a page, this makes
sure that the page will always have enough elements displayed.
Removes the need for POST to collection which would hit against upload
limits.
The client tries to auto rename the file by adding a suffix "(2)".
It tries to use the file list on the client side to guess a
suitable name. In case a file still cannot be uploaded and creates a
conflict, which can happen when the file was concurrently uploaded, the
logic will continue increasing the suffix.
The web UI now uses for PUT uploads which aren't restricted by PHP's
upload_max_filesize and post_max_size
Signed-off-by: Lukas Reschke <lukas@statuscode.ch>
- uses PUT method with jquery.fileupload for regular and public file
lists
- for IE and browsers that don't support it, use POST with iframe
transport
- implemented Sabre plugin to handle iframe transport and redirect the
embedded PUT request to the proper handler
- added RFC5995 POST to file collection with "add-member" property to
make it possible to auto-rename conflicting file names
- remove obsolete ajax/upload.php and obsolete ajax routes
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
Enhanced the REPORT method on the Webdav endpoint and added a
"oc:favorite" filter rule. When set, it will return a flat list of
results filtered with only favorite files.
The web UI was also adjusted to use this REPORT method instead of the
private API endpoint.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
issue:
* drag'n'drop a folder into the files app in Firefox
* the highlight stays there because Firefox doesn't trigger the drop event for folders
solution:
* behave like the drop event if the dragover event isn't fired for 100ms (only applied in Firefox)
The new admin page broke the updating of the max upload size. This is
due to very old code there.
* Now update is done in the background using js
* Added proper route+controller to update
Fixes#994
Hidden files (dot files) are now always rendered in the DOM to make
sure that all file operations and selection still work as expected.
Their visibility is now toggled on CSS level.
When loading the next page of search results, make sure that the loop
can end if there are no more elements in case the total doesn't match.
Also added a check to avoid recomputing the search results whenever the
setFilter() is called with the same value. This happens when navigating
away to another folder, the search field gets cleared automatically and
it calls FileList.setFilter('').
When filtering the file list, if a result is on an unrendered page,
make sure to call _nextPage() to prerender the pages in order to
display all matching results.
