132 lines
No EOL
11 KiB
JSON
132 lines
No EOL
11 KiB
JSON
{ "translations": {
|
||
"Failed to clear the mappings." : "清除映射失敗",
|
||
"Failed to delete the server configuration" : "刪除伺服器設定時失敗",
|
||
"The configuration is invalid: anonymous bind is not allowed." : "設定檔無效: 不允許匿名使者",
|
||
"The configuration is valid and the connection could be established!" : "設定有效且連線可建立",
|
||
"The configuration is valid, but the Bind failed. Please check the server settings and credentials." : "設定有效但連線無法建立，請檢查伺服器設定與認證資料。",
|
||
"The configuration is invalid. Please have a look at the logs for further details." : "設定無效，更多細節請參閱 ownCloud 的記錄檔。",
|
||
"No action specified" : "沒有指定操作",
|
||
"No configuration specified" : "沒有指定設定",
|
||
"No data specified" : "沒有指定資料",
|
||
" Could not set configuration %s" : "無法設定 %s 為設定值",
|
||
"Action does not exist" : "操作不存在",
|
||
"The Base DN appears to be wrong" : "Base DN 出現問題",
|
||
"Configuration incorrect" : "設定不正確",
|
||
"Configuration incomplete" : "設定未完成",
|
||
"Configuration OK" : "設定完成",
|
||
"Select groups" : "選擇群組",
|
||
"Select object classes" : "選擇物件",
|
||
"Please check the credentials, they seem to be wrong." : "請檢查您的憑證，似乎出了點問題",
|
||
"Please specify the port, it could not be auto-detected." : "請您指定您的連接阜，無法自動偵測",
|
||
"Base DN could not be auto-detected, please revise credentials, host and port." : "Base DN 無法被自動偵測，請重新設定主機，連接阜以及認證",
|
||
"Could not detect Base DN, please enter it manually." : "無法偵測到Base DN，請手動輸入",
|
||
"{nthServer}. Server" : "{nthServer}. 伺服器",
|
||
"No object found in the given Base DN. Please revise." : "在Base DN中找不到物件，請重新修改",
|
||
"More than 1,000 directory entries available." : "目前有超過 1,000 個資料夾項目是可以使用的",
|
||
"An error occurred. Please check the Base DN, as well as connection settings and credentials." : "產生錯誤，請檢查Base DN，以及連線設定和驗證",
|
||
"Do you really want to delete the current Server Configuration?" : "您真的要刪除現在的伺服器設定嗎？",
|
||
"Confirm Deletion" : "確認刪除",
|
||
"Mappings cleared successfully!" : "Mappings清除成功",
|
||
"Error while clearing the mappings." : "清除Mappings發生錯誤",
|
||
"Anonymous bind is not allowed. Please provide a User DN and Password." : "匿名是不允許的，請提供使用者DN和密碼",
|
||
"LDAP Operations error. Anonymous bind might not be allowed." : "LDAP 錯誤，不允許匿名榜定",
|
||
"Saving failed. Please make sure the database is in Operation. Reload before continuing." : "存檔失敗，請確認資料庫運作中，請重新讀取一次然後再試一次",
|
||
"Switching the mode will enable automatic LDAP queries. Depending on your LDAP size they may take a while. Do you still want to switch the mode?" : "切換模式會使LDAP自動抓取資訊，抓取資訊的時間依您的LDAP大小而定，可能會花一點時間，您確定要切換模式?",
|
||
"Mode switch" : "模式切換",
|
||
"Select attributes" : "選擇屬性",
|
||
"User not found. Please check your login attributes and username. Effective filter (to copy-and-paste for command line validation): <br/>" : "找不到使用者，請檢查您的登入資料以及使用者名稱。驗證(複製貼上到命令提示位元做認證):<br/>",
|
||
"User found and settings verified." : "使用者存在，設定值正確",
|
||
"An unspecified error occurred. Please check the settings and the log." : "發生預期之外的錯誤，請檢查設定和記錄檔",
|
||
"A connection error to LDAP / AD occurred, please check host, port and credentials." : "連線到 LDAP/AD出現錯誤，請檢查主機，連接阜和驗證資訊",
|
||
"Please provide a login name to test against" : "請提供登入姓名以便再次測試",
|
||
"The group box was disabled, because the LDAP / AD server does not support memberOf." : "群組盒已經停用，LDAP/AD 伺服器並不支援",
|
||
"_%s group found_::_%s groups found_" : ["找到 %s 群組"],
|
||
"_%s user found_::_%s users found_" : ["找到 %s 使用者"],
|
||
"Could not detect user display name attribute. Please specify it yourself in advanced ldap settings." : "無法偵測使用者的顯示名稱，請您自行在ldap設定中指定",
|
||
"Could not find the desired feature" : "無法找到所需的功能",
|
||
"Invalid Host" : "無效的Host",
|
||
"Test Configuration" : "測試此設定",
|
||
"Help" : "說明",
|
||
"Only from these groups:" : "只從這些群組:",
|
||
"Search groups" : "搜尋群組",
|
||
"Available groups" : "可用的群組",
|
||
"Selected groups" : "已選擇的群組",
|
||
"Edit LDAP Query" : "編輯LDAP Query",
|
||
"LDAP Filter:" : "LDAP 過慮器:",
|
||
"Verify settings and count groups" : "驗證設定並計算群組數",
|
||
"When logging in, %s will find the user based on the following attributes:" : "當登入%s時，將會根據以下屬性找到使用者 :",
|
||
"LDAP / AD Username:" : "LDAP / AD 使用者名稱:",
|
||
"LDAP / AD Email Address:" : "LDAP / AD 電子郵件:",
|
||
"Other Attributes:" : "其他屬性:",
|
||
"Defines the filter to apply, when login is attempted. %%uid replaces the username in the login action. Example: \"uid=%%uid\"" : "試圖登入時會定義要套用的篩選器。登入過程中%%uid會取代使用者名稱。例如:\"uid=%%uid\"",
|
||
"Test Loginname" : "測試登入姓名",
|
||
"Verify settings" : "驗證設定",
|
||
"1. Server" : "1. 伺服器",
|
||
"%s. Server:" : "%s. 伺服器:",
|
||
"Add a new and blank configuration" : "新增一個空白的設定檔",
|
||
"Copy current configuration into new directory binding" : "複製目前的設定檔到新目錄",
|
||
"Delete the current configuration" : "刪除目前的設定檔",
|
||
"Host" : "主機",
|
||
"You can omit the protocol, except you require SSL. Then start with ldaps://" : "若您不需要 SSL 加密連線則不需輸入通訊協定，反之請輸入 ldaps://",
|
||
"Port" : "連接埠",
|
||
"Detect Port" : "偵測連接阜",
|
||
"User DN" : "User DN",
|
||
"The DN of the client user with which the bind shall be done, e.g. uid=agent,dc=example,dc=com. For anonymous access, leave DN and Password empty." : "客戶端使用者的DN與特定字詞的連結需要完善，例如:uid=agent,dc=example,dc=com。若是匿名連接，則將DN與密碼欄位留白。",
|
||
"Password" : "密碼",
|
||
"For anonymous access, leave DN and Password empty." : "匿名連接時請將 DN 與密碼欄位留白",
|
||
"One Base DN per line" : "一行一個 Base DN",
|
||
"You can specify Base DN for users and groups in the Advanced tab" : "您可以在進階標籤頁裡面指定使用者及群組的 Base DN",
|
||
"Detect Base DN" : "偵測 Base DN",
|
||
"Test Base DN" : "測試 Base DN",
|
||
"Manually enter LDAP filters (recommended for large directories)" : "手動輸入 LDAP篩選器 (建議在大型的資料環境)",
|
||
"The filter specifies which LDAP users shall have access to the %s instance." : "篩選起指定哪些LDAP的使用者應該擁有存取%s的權限",
|
||
"Verify settings and count users" : "驗證設定並計算使用者數",
|
||
"Saving" : "儲存",
|
||
"Back" : "返回",
|
||
"Continue" : "繼續",
|
||
"LDAP" : "LDAP",
|
||
"Server" : "伺服器",
|
||
"Users" : "使用者",
|
||
"Login Attributes" : "登入的設定",
|
||
"Groups" : "群組",
|
||
"Advanced" : "進階",
|
||
"<b>Warning:</b> Apps user_ldap and user_webdavauth are incompatible. You may experience unexpected behavior. Please ask your system administrator to disable one of them." : "<b>警告:</b> 應用程式user_ldap和user_webdavauth互不相容。可能會造成無法預期的結果。請要求您的系統管理員將兩者其中之一停用。",
|
||
"<b>Warning:</b> The PHP LDAP module is not installed, the backend will not work. Please ask your system administrator to install it." : "<b>警告：</b>沒有安裝 PHP LDAP 模組，後端系統將無法運作，請要求您的系統管理員安裝模組。",
|
||
"Connection Settings" : "連線設定",
|
||
"Configuration Active" : "設定使用中",
|
||
"When unchecked, this configuration will be skipped." : "沒有被勾選時，此設定會被略過。",
|
||
"Backup (Replica) Host" : "備用主機",
|
||
"Give an optional backup host. It must be a replica of the main LDAP/AD server." : "可以選擇性設定備用主機，必須是 LDAP/AD 中央伺服器的複本。",
|
||
"Backup (Replica) Port" : "備用（複本）連接埠",
|
||
"Disable Main Server" : "停用主伺服器",
|
||
"Turn off SSL certificate validation." : "關閉 SSL 憑證檢查",
|
||
"Not recommended, use it for testing only! If connection only works with this option, import the LDAP server's SSL certificate in your %s server." : "不建議，請僅在測試時使用！如果連線只能在此設定下工作，請匯入LDAP伺服器的SSL認證到您的伺服器%s上",
|
||
"Cache Time-To-Live" : "快取的存活時間",
|
||
"in seconds. A change empties the cache." : "以秒為單位。變更後會清空快取。",
|
||
"Directory Settings" : "目錄設定",
|
||
"User Display Name Field" : "使用者顯示名稱欄位",
|
||
"The LDAP attribute to use to generate the user's display name." : "LDAP設定值，用於產生使用者的顯示名稱",
|
||
"Base User Tree" : "Base User Tree",
|
||
"One User Base DN per line" : "一行一個使用者 Base DN",
|
||
"User Search Attributes" : "User Search Attributes",
|
||
"Optional; one attribute per line" : "非必要，一行一項屬性",
|
||
"Group Display Name Field" : "群組顯示名稱欄位",
|
||
"The LDAP attribute to use to generate the groups's display name." : "LDAP設定值，用於產生使用者群組的顯示名稱",
|
||
"Base Group Tree" : "Base Group Tree",
|
||
"One Group Base DN per line" : "一行一個 Group Base DN",
|
||
"Group Search Attributes" : "Group Search Attributes",
|
||
"Group-Member association" : "Group-Member association",
|
||
"Special Attributes" : "特殊屬性",
|
||
"Quota Field" : "配額欄位",
|
||
"Quota Default" : "預設配額",
|
||
"in bytes" : "以位元組為單位",
|
||
"Email Field" : "電郵欄位",
|
||
"User Home Folder Naming Rule" : "使用者家目錄的命名規則",
|
||
"Leave empty for user name (default). Otherwise, specify an LDAP/AD attribute." : "使用者名稱請留白(預設)。若不留白請指定一個LDAP/AD屬性。",
|
||
"Internal Username" : "內部使用者名稱",
|
||
"Internal Username Attribute:" : "內部使用者名稱屬性:",
|
||
"Override UUID detection" : "偵測覆寫UUID",
|
||
"UUID Attribute for Users:" : "使用者的UUID值:",
|
||
"UUID Attribute for Groups:" : "群組的UUID值:"
|
||
},"pluralForm" :"nplurals=1; plural=0;"
|
||
} |