toolbox/test/system/104-run.bats

377 lines
11 KiB
Text
Raw Normal View History

#!/usr/bin/env bats
#
# Copyright © 2021 2022 Red Hat, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
load 'libs/bats-support/load'
load 'libs/bats-assert/load'
load 'libs/helpers'
setup() {
_setup_environment
cleanup_containers
}
teardown() {
cleanup_containers
}
@test "run: Smoke test with true(1)" {
create_default_container
run $TOOLBOX run true
assert_success
assert_output ""
}
@test "run: Smoke test with false(1)" {
create_default_container
run -1 $TOOLBOX run false
assert_failure
assert_output ""
}
cmd/run: Ensure that 'run' has the same container environment as 'enter' Currently, commands invoked using 'toolbox run' have a different environment than the interactive environment offered by 'toolbox enter'. This is because 'toolbox run' was invoking the commands using something like this: $ bash -c 'exec "$@"' bash [COMMAND] ... whereas, 'toolbox enter' was using something like this: $ bash -c 'exec "$@"' bash bash --login In the first case, the helper Bash shell is a non-interactive non-login shell. This means that it doesn't read any of the usual start-up files, and, hence, it doesn't pick up anything that's specified in them. It runs with the default environment variables set up by Podman and the Toolbx image, plus the environment variables set by Toolbx itself. In the second case, even though the helper Bash shell is still the same as the first, it eventually invokes a login shell, which runs the usual set of start-up files and picks up everything that's specified in them. Therefore, to ensure parity, 'toolbox run' should always have a login shell in the call chain inside the Toolbx container. The easiest option is to always use a helper shell that's a login shell with 'toolbox run', but not 'toolbox enter' so as to avoid reading the same start-up files twice, due to two login shells in the call chain. It will still end up reading the same start-up files twice, if someone tried to invoke a login shell through 'toolbox run', which is fine. It's very difficult to be sure that the user is invoking a login shell through 'toolbox run', and it's not what most users will be doing. https://github.com/containers/toolbox/issues/1076
2022-10-25 09:07:23 +00:00
@test "run: Ensure that a login shell is used to invoke the command" {
create_default_container
cp "$HOME"/.bash_profile "$HOME"/.bash_profile.orig
echo "echo \"~/.bash_profile read\"" >>"$HOME"/.bash_profile
run $TOOLBOX run true
mv "$HOME"/.bash_profile.orig "$HOME"/.bash_profile
assert_success
assert_line --index 0 "~/.bash_profile read"
assert [ ${#lines[@]} -eq 1 ]
}
@test "run: 'echo \"Hello World\"' inside the default container" {
create_default_container
run $TOOLBOX --verbose run echo "Hello World"
assert_success
assert_line --index $((${#lines[@]}-1)) "Hello World"
}
@test "run: 'echo \"Hello World\"' inside a restarted container" {
create_container running
start_container running
stop_container running
run $TOOLBOX --verbose run --container running echo "Hello World"
assert_success
assert_line --index $((${#lines[@]}-1)) "Hello World"
}
@test "run: 'sudo id' inside the default container" {
create_default_container
output="$($TOOLBOX --verbose run sudo id 2>$BATS_TMPDIR/stderr)"
status="$?"
echo "# stderr"
cat $BATS_TMPDIR/stderr
echo "# stdout"
echo $output
assert_success
assert_output --partial "uid=0(root)"
}
@test "run: Ensure that /run/.containerenv exists" {
create_default_container
run --separate-stderr $TOOLBOX run cat /run/.containerenv
assert_success
assert [ ${#lines[@]} -gt 0 ]
assert [ ${#stderr_lines[@]} -eq 0 ]
}
@test "run: Ensure that /run/.toolboxenv exists" {
create_default_container
run --separate-stderr $TOOLBOX run test -f /run/.toolboxenv
assert_success
assert [ ${#lines[@]} -eq 0 ]
assert [ ${#stderr_lines[@]} -eq 0 ]
}
@test "run: Ensure that the default container is used" {
run echo "$name"
assert_success
assert_output ""
local default_container_name="$(get_system_id)-toolbox-$(get_system_version)"
create_default_container
create_container other-container
run --separate-stderr $TOOLBOX run cat /run/.containerenv
assert_success
assert [ ${#lines[@]} -gt 0 ]
assert [ ${#stderr_lines[@]} -eq 0 ]
source <(echo "$output")
run echo "$name"
assert_success
assert_output "$default_container_name"
}
@test "run: Ensure that a specific container is used" {
run echo "$name"
assert_success
assert_output ""
local default_container_name="$(get_system_id)-toolbox-$(get_system_version)"
create_default_container
create_container other-container
run --separate-stderr $TOOLBOX run --container other-container cat /run/.containerenv
assert_success
assert [ ${#lines[@]} -gt 0 ]
assert [ ${#stderr_lines[@]} -eq 0 ]
source <(echo "$output")
run echo "$name"
assert_success
assert_output "other-container"
}
@test "run: Ensure that $HOME is used as a fallback working directory" {
local default_container_name="$(get_system_id)-toolbox-$(get_system_version)"
create_default_container
pushd /etc/kernel
run --separate-stderr $TOOLBOX run pwd
popd
assert_success
assert_line --index 0 "$HOME"
assert [ ${#lines[@]} -eq 1 ]
lines=("${stderr_lines[@]}")
assert_line --index $((${#stderr_lines[@]}-2)) "Error: directory /etc/kernel not found in container $default_container_name"
assert_line --index $((${#stderr_lines[@]}-1)) "Using $HOME instead."
assert [ ${#stderr_lines[@]} -gt 2 ]
}
@test "run: Pass down 1 additional file descriptor" {
create_default_container
# File descriptors 3 and 4 are reserved by Bats.
run --separate-stderr $TOOLBOX run --preserve-fds 3 readlink /proc/self/fd/5 5>/dev/null
assert_success
assert_line --index 0 "/dev/null"
assert [ ${#lines[@]} -eq 1 ]
assert [ ${#stderr_lines[@]} -eq 0 ]
}
@test "run: Try the non-existent default container with none other present" {
local default_container_name="$(get_system_id)-toolbox-$(get_system_version)"
run --separate-stderr $TOOLBOX run true
assert_failure
assert [ ${#lines[@]} -eq 0 ]
lines=("${stderr_lines[@]}")
assert_line --index 0 "Error: container $default_container_name not found"
assert_line --index 1 "Use the 'create' command to create a toolbox."
assert_line --index 2 "Run 'toolbox --help' for usage."
assert [ ${#stderr_lines[@]} -eq 3 ]
}
@test "run: Try the non-existent default container with another present" {
local default_container_name="$(get_system_id)-toolbox-$(get_system_version)"
create_container other-container
run --separate-stderr $TOOLBOX run true
assert_failure
assert [ ${#lines[@]} -eq 0 ]
lines=("${stderr_lines[@]}")
assert_line --index 0 "Error: container $default_container_name not found"
assert_line --index 1 "Use the 'create' command to create a toolbox."
assert_line --index 2 "Run 'toolbox --help' for usage."
assert [ ${#stderr_lines[@]} -eq 3 ]
}
@test "run: Try a specific non-existent container with another present" {
create_container other-container
run --separate-stderr $TOOLBOX run --container wrong-container true
assert_failure
assert [ ${#lines[@]} -eq 0 ]
lines=("${stderr_lines[@]}")
assert_line --index 0 "Error: container wrong-container not found"
assert_line --index 1 "Use the 'create' command to create a toolbox."
assert_line --index 2 "Run 'toolbox --help' for usage."
assert [ ${#stderr_lines[@]} -eq 3 ]
}
@test "run: Try an unsupported distribution" {
local distro="foo"
run --separate-stderr $TOOLBOX --assumeyes run --distro "$distro" ls
assert_failure
assert [ ${#lines[@]} -eq 0 ]
lines=("${stderr_lines[@]}")
assert_line --index 0 "Error: invalid argument for '--distro'"
assert_line --index 1 "Distribution $distro is unsupported."
assert_line --index 2 "Run 'toolbox --help' for usage."
assert [ ${#stderr_lines[@]} -eq 3 ]
}
@test "run: Try Fedora with an invalid release" {
run --separate-stderr $TOOLBOX run --distro fedora --release foobar ls
assert_failure
assert [ ${#lines[@]} -eq 0 ]
lines=("${stderr_lines[@]}")
assert_line --index 0 "Error: invalid argument for '--release'"
assert_line --index 1 "The release must be a positive integer."
assert_line --index 2 "Run 'toolbox --help' for usage."
assert [ ${#stderr_lines[@]} -eq 3 ]
run --separate-stderr $TOOLBOX run --distro fedora --release -3 ls
assert_failure
assert [ ${#lines[@]} -eq 0 ]
lines=("${stderr_lines[@]}")
assert_line --index 0 "Error: invalid argument for '--release'"
assert_line --index 1 "The release must be a positive integer."
assert_line --index 2 "Run 'toolbox --help' for usage."
assert [ ${#stderr_lines[@]} -eq 3 ]
}
@test "run: Try RHEL with an invalid release" {
run --separate-stderr $TOOLBOX run --distro rhel --release 8 ls
assert_failure
assert [ ${#lines[@]} -eq 0 ]
lines=("${stderr_lines[@]}")
assert_line --index 0 "Error: invalid argument for '--release'"
assert_line --index 1 "The release must be in the '<major>.<minor>' format."
assert_line --index 2 "Run 'toolbox --help' for usage."
assert [ ${#stderr_lines[@]} -eq 3 ]
run --separate-stderr $TOOLBOX run --distro rhel --release 8.2foo ls
assert_failure
assert [ ${#lines[@]} -eq 0 ]
lines=("${stderr_lines[@]}")
assert_line --index 0 "Error: invalid argument for '--release'"
assert_line --index 1 "The release must be in the '<major>.<minor>' format."
assert_line --index 2 "Run 'toolbox --help' for usage."
assert [ ${#stderr_lines[@]} -eq 3 ]
run --separate-stderr $TOOLBOX run --distro rhel --release -2.1 ls
assert_failure
assert [ ${#lines[@]} -eq 0 ]
lines=("${stderr_lines[@]}")
assert_line --index 0 "Error: invalid argument for '--release'"
assert_line --index 1 "The release must be a positive number."
assert_line --index 2 "Run 'toolbox --help' for usage."
assert [ ${#stderr_lines[@]} -eq 3 ]
}
@test "run: Try a non-default distro without a release" {
local distro="fedora"
local system_id="$(get_system_id)"
if [ "$system_id" = "fedora" ]; then
distro="rhel"
fi
run --separate-stderr $TOOLBOX run --distro "$distro" ls
assert_failure
assert [ ${#lines[@]} -eq 0 ]
lines=("${stderr_lines[@]}")
assert_line --index 0 "Error: option '--release' is needed"
assert_line --index 1 "Distribution $distro doesn't match the host."
assert_line --index 2 "Run 'toolbox --help' for usage."
assert [ ${#stderr_lines[@]} -eq 3 ]
}
@test "run: Smoke test with 'exit 2'" {
create_default_container
run -2 $TOOLBOX run /bin/sh -c 'exit 2'
assert_failure
assert_output ""
}
@test "run: Pass down 1 invalid file descriptor" {
local default_container_name="$(get_system_id)-toolbox-$(get_system_version)"
create_default_container
# File descriptors 3 and 4 are reserved by Bats.
run -125 --separate-stderr $TOOLBOX run --preserve-fds 3 readlink /proc/self/fd/5
assert_failure
assert [ ${#lines[@]} -eq 0 ]
lines=("${stderr_lines[@]}")
assert_line --index 0 "Error: file descriptor 5 is not available - the preserve-fds option requires that file descriptors must be passed"
assert_line --index 1 "Error: failed to invoke 'podman exec' in container $default_container_name"
assert [ ${#stderr_lines[@]} -eq 2 ]
}
@test "run: Try /etc as a command" {
create_default_container
run -126 --separate-stderr $TOOLBOX run /etc
assert_failure
assert [ ${#lines[@]} -eq 0 ]
lines=("${stderr_lines[@]}")
assert_line --index 0 "bash: line 1: /etc: Is a directory"
assert_line --index 1 "bash: line 1: exec: /etc: cannot execute: Is a directory"
assert_line --index 2 "Error: failed to invoke command /etc in container $(get_latest_container_name)"
assert [ ${#stderr_lines[@]} -eq 3 ]
}
@test "run: Try a non-existent command" {
local cmd="non-existent-command"
create_default_container
run -127 --separate-stderr $TOOLBOX run $cmd
assert_failure
assert [ ${#lines[@]} -eq 0 ]
lines=("${stderr_lines[@]}")
assert_line --index 0 "bash: line 1: exec: $cmd: not found"
assert_line --index 1 "Error: command $cmd not found in container $(get_latest_container_name)"
assert [ ${#stderr_lines[@]} -eq 2 ]
}