These tests assume that the group and user information on the host
operating system can be provided by different plugins for the GNU Name
Service Switch (or NSS) functionality of the GNU C Library. eg., on
enterprise FreeIPA set-ups. However, it's expected that everything
inside the Toolbx container will be provided by /etc/group, /etc/passwd,
/etc/shadow, etc..
While /etc/group and /etc/passwd can be read by any user, /etc/shadow
can only be read by root. However, it's awkward to use sudo(8) in the
test cases involving /etc/shadow, because they ensure that root and
$USER don't need passwords to authenticate inside the container, and
sudo(8) itself depends on that. If sudo(8) is used, the test suite can
behave unexpectedly if Toolbx didn't set up the container correctly.
eg., it can get blocked waiting for a password.
Hence, 'podman unshare' is used instead to enter the container's initial
user namespace, where $USER from the host appears as root. This is
sufficient because the test cases only need to read /etc/shadow inside
the Toolbx container.
https://github.com/containers/toolbox/pull/1355
The '[' and 'test' implementations from GNU coreutils don't support '-v'
as a way to check if a shell variable is set [1]. Only Bash's built-in
implementations do.
This is quite confusing and makes it difficult to find out what '-v'
actually does. eg., 'man --all test' only shows the manual for the GNU
coreutils version, which doesn't list '-v' [1], and, 'man --all [' only
shows the manual for Bash's built-ins, which also doesn't list '-v'.
One has to go to the bash(1) manual to find it [2].
Elsewhere in the code base [3], the same thing is accomplished with '-z'
and parameter substitution, which are more widely supported and, hence,
easier to find documentation for.
[1] https://manpages.debian.org/testing/coreutils/test.1.en.html
[2] https://linux.die.net/man/1/bash
[3] Commit 84ae385f33https://github.com/containers/toolbox/pull/1334https://github.com/containers/toolbox/pull/1341
'[' is a command that's the same as 'test' and they might be implemented
as standalone executables or shell built-ins. Therefore, the negation
(ie., '!') has to cover the entire command to operate on its exit code.
Instead, if it's writtten as '[ ! ... ]', then the negation becomes an
argument to '[', which isn't the same thing.
Fallout from 54a2ca1eadhttps://github.com/containers/toolbox/pull/1341
First, it's not a good idea to use awk(1) as a grep(1) replacement.
Unless one really needs the AWK programming language, it's better to
stick to grep(1) because it's simpler.
Secondly, it's better to look for a specific os-release(5) field instead
of looking for the occurrence of 'rawhide' anywhere in the file, because
it lowers the possibility of false positives.
https://github.com/containers/toolbox/pull/1336
First, it's not a good idea to use awk(1) as a grep(1) replacement.
Unless one really needs the AWK programming language, it's better to
stick to grep(1) because it's simpler.
Secondly, it's better to look for a specific os-release(5) field instead
of looking for the occurrence of 'rawhide' anywhere in the file, because
it lowers the possibility of false positives.
https://github.com/containers/toolbox/pull/1332
The following caveats must be noted:
* Podman sets the Toolbx container's soft limit for the maximum number
of open file descriptors to the host's hard limit, which is often
greater than the host's soft limit [1].
* The ulimit(1) options -P, -T, -b, and -k don't work on Fedora 38
because the corresponding resource arguments for getrlimit(2) are
absent from the operating system. These are RLIMIT_NPTS,
RLIMIT_PTHREAD, RLIMIT_SBSIZE and RLIMIT_KQUEUES respectively.
[1] https://github.com/containers/podman/issues/17681https://github.com/containers/toolbox/issues/213
The current approach of extracting the VERSION_ID field from
os-release(5) assumes that the value is not quoted. There's no
guarantee that this will be the case. It only happens to be so on
Fedora by chance, and is different on Ubuntu:
$ cat /etc/os-release
...
VERSION_ID="22.04"
...
This means that "22.04", including the double quotes, is read as the
value of VERSION_ID on Ubuntu, not 22.04. This is wrong because this
value can't be used as is in image and container names. There's no
image called quay.io/toolbx/ubuntu-toolbox:"22.04" and double quotes are
not allowed in container names.
Instead, use the same approach as profile.d/toolbox.sh and the old POSIX
shell implementation that doesn't rely on the quoting of the
os-release(5) values.
Fallout from b27795a03ehttps://github.com/containers/toolbox/pull/1320
The current approach of selecting all the os-release(5) fields that have
'ID' in their name (eg., ID, VERSION_ID, PLATFORM_ID, VARIANT_ID, etc.)
and then picking the first one, assumes that the ID field will always be
placed above the others in os-release(5). There's no guarantee that
this will be the case. It only happens to be so on Fedora by chance,
and is different on Ubuntu:
$ cat /etc/os-release
...
VERSION_ID="22.04"
...
ID=ubuntu
ID_LIKE=debian
...
This means that "22.04" is read as the value of ID on Ubuntu, which is
clearly wrong.
Instead, use the same approach as profile.d/toolbox.sh and the old POSIX
shell implementation that doesn't rely on the order of the os-release(5)
fields.
Fallout from 54a2ca1eadhttps://github.com/containers/toolbox/pull/1320
We wasted some time trying to get the tests running locally, when all we
were missing were the 'git submodule ...' commands.
Add some more obvious hints about this possible stumbling block.
Note that Bats cautions against printing outside the @test, setup* or
teardown* functions [1]. In this case, doing so leads to the first line
of the error output going missing, when using the pretty formatter for
human consumption:
$ bats --formatter pretty ./test/system
✗ setup_suite
Forgot to run 'git submodule init' and 'git submodule update' ?
bats warning: Executed 1 instead of expected 191 tests
191 tests, 1 failure, 190 not run
[1] https://bats-core.readthedocs.io/en/stable/writing-tests.htmlhttps://github.com/containers/toolbox/pull/1298
Signed-off-by: Matthias Clasen <mclasen@redhat.com>
The 000-setup.bats and 999-teardown.bats files were added [1] at a time
when Bats didn't offer any hooks for suite-wide setup and teardown.
That changed in Bats 1.7.0, which introduced the setup_suite and
teardown_suite hooks. These hooks make it easier to run a subset of the
tests, which is a good thing.
In the past, to run a subset of the tests, one had to do:
$ bats ./test/system/000-setup.bats ./test/system/002-help.bats \
./test/system/999-teardown.bats
Now, one only has to do:
$ bats ./test/system/002-help.bats
Commit e22a82fec8 already added a dependency on Bats >= 1.7.0.
Therefore, it should be exploited wherever possible to simplify things.
[1] Commit 54a2ca1eadhttps://github.com/containers/toolbox/issues/751
[2] Bats commit fb467ec3f04e322a
https://github.com/bats-core/bats-core/issues/39https://bats-core.readthedocs.io/en/stable/writing-tests.htmlhttps://github.com/containers/toolbox/pull/1317
Bats 1.7.0 emits a warning if a feature that is only available starting
from a certain version of Bats onwards is used without specifying that
version [1]:
BW02: Using flags on `run` requires at least BATS_VERSION=1.5.0. Use
`bats_require_minimum_version 1.5.0` to fix this message.
(from function `bats_warn_minimum_guaranteed_version' in file
/usr/lib/bats-core/warnings.bash, line 32,
from function `run' in file
/usr/lib/bats-core/test_functions.bash, line 227,
in test file test/system/001-version.bats, line 27)
Note that bats_require_minimum_version itself is only available from
Bats 1.7.0 [2]. Hence, even though the specific feature here (using
flags on 'run') only requires Bats >= 1.5.0, in practice Bats >= 1.7.0
is needed. Fortunately, commit e22a82fec8 already added a
dependency on Bats >= 1.7.0. So, there's nothing to worry about.
[1] Bats commit 82002bb6c1a5c418
https://github.com/bats-core/bats-core/issues/556https://bats-core.readthedocs.io/en/stable/warnings/BW02.html
[2] Bats commit 71d6b71cebc3d32b
https://github.com/bats-core/bats-core/issues/556https://bats-core.readthedocs.io/en/stable/warnings/BW02.htmlhttps://github.com/containers/toolbox/pull/1315
Commit e22a82fec8 already added a dependency on Bats >= 1.7.0,
which is present on Fedora >= 36. Therefore, it should be exploited
wherever possible to simplify things.
Earlier, when the line counts were checked only with Bats >= 1.7.0,
there was a need to separately check the whole standard error and
output streams with 'assert_output' for the tests to be useful on
Fedora 35, which only had Bats 1.5.0. Now that the line counts are
being checked unconditionally, there's no need for that anymore.
Note that bats_require_minimum_version itself is only available from
Bats 1.7.0 [1].
[1] Bats commit 71d6b71cebc3d32b
https://github.com/bats-core/bats-core/issues/556https://bats-core.readthedocs.io/en/stable/warnings/BW02.htmlhttps://github.com/containers/toolbox/pull/1314
This allows using the 'distro' option to create and enter Arch Linux
containers. Due to Arch's rolling-release model, the 'release' option
isn't required. If 'release' is used, the accepted values are 'latest'
and 'rolling'.
https://github.com/containers/toolbox/pull/1311
It's quite obvious what the corresponding code is doing, and it isn't
any harder to understand than the rest of the code that's not commented.
https://github.com/containers/toolbox/pull/1282
This is a quick sanity check with 'podman images' to ensure that all the
images are in place before running 'list'. Other tests already do this,
so this change makes these two tests consistent with the rest.
https://github.com/containers/toolbox/pull/1273
This is the 'simple' case of having a well-known Toolbx image (ie.,
not a copy, not an image without a name, not a non-Toolbx image). It's
good to ensure that the default image works as expected with 'list'
before moving on to more complex scenarios.
https://github.com/containers/toolbox/pull/1278
Currently, some of the names of the tests were too long, and had
inconsistent and verbose wording. This made it difficult to look at
them and get a gist of all the scenarios being tested. The names are
like headings. They shouldn't be too long, should capture the primary
objective of the test and be consistent in their wording.
https://github.com/containers/toolbox/pull/1276
Currently, some of the names of the tests were too long, and had
inconsistent and verbose wording. This made it difficult to look at
them and get a gist of all the scenarios being tested. The names are
like headings. They shouldn't be too long, should capture the primary
objective of the test and be consistent in their wording.
https://github.com/containers/toolbox/pull/1271
