Prior to this commit we were keeping a count of how many KeyUpdates we
have processed and failing if we had had too many. This simplistic approach
is not sufficient for long running connections. Since many KeyUpdates
would not be a particular good DoS route anyway, the simplest solution is
to simply remove the key update count.
Fixes#8068
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8299)
(cherry picked from commit 3409a5ff8a)
The original 1.1.1 design was to use SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal start/end of a post-handshake message
exchange in TLSv1.3. Unfortunately experience has shown that this confuses
some applications who mistake it for a TLSv1.2 renegotiation. This means
that KeyUpdate messages are not handled properly.
This commit removes the use of SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal the start/end of a post-handshake
message exchange. Individual post-handshake messages are still signalled in
the normal way.
This is a potentially breaking change if there are any applications already
written that expect to see these TLSv1.3 events. However, without it,
KeyUpdate is not currently usable for many applications.
Fixes#8069
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8096)
(cherry picked from commit 4af5836b55)
set_cipher_list() sets TLSv1.2 (and below) ciphers, and its success or
failure should not depend on whether set_ciphersuites() has been used to
setup TLSv1.3 ciphers.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7759)
(cherry picked from commit 3c83c5ba4f)
When computing the end-point shared secret, don't take the
terminating NULL character into account.
Please note that this fix breaks interoperability with older
versions of OpenSSL, which are not fixed.
Fixes#7956
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7957)
(cherry picked from commit 09d62b336d)
This commit erroneously kept the DTLS timer running after the end of the
handshake. This is not correct behaviour and shold be reverted.
This reverts commit f7506416b1.
Fixes#7998
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8047)
(cherry picked from commit bcc1f3e2ba)
We were setting a limit of SSL3_RT_MAX_PLAIN_LENGTH on the size of the
ClientHello. AFAIK there is nothing in the standards that requires this
limit.
The limit goes all the way back to when support for extensions was first
added for TLSv1.0. It got converted into a WPACKET max size in 1.1.1. Most
likely it was originally added to avoid the complexity of having to grow
the init_buf in the middle of adding extensions. With WPACKET this is
irrelevant since it will grow automatically.
This issue came up when an attempt was made to send a very large
certificate_authorities extension in the ClientHello.
We should just remove the limit.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7424)
(cherry picked from commit 7835e97b6f)
1. In addition to overriding the default application name,
one can now also override the configuration file name
and flags passed to CONF_modules_load_file().
2. By default we still keep going when configuration file
processing fails. But, applications that want to be
strict about initialization errors can now make explicit
flag choices via non-null OPENSSL_INIT_SETTINGS that omit
the CONF_MFLAGS_IGNORE_RETURN_CODES flag (which had so far
been both undocumented and unused).
3. In OPENSSL_init_ssl() do not request OPENSSL_INIT_LOAD_CONFIG
if the options already include OPENSSL_INIT_NO_LOAD_CONFIG.
4. Don't set up atexit() handlers when called with opts equal to
OPENSSL_INIT_BASE_ONLY (this flag should only be used alone).
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7969)
The cryptopro extension is supposed to be unsolicited and appears in the
ServerHello only. Additionally it is unofficial and unregistered - therefore
we should really treat it like any other unknown extension if we see it in
the ClientHello.
Fixes#7747
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7984)
(cherry picked from commit 23fed8ba0e)
We have a number of instances where there are multiple "init" functions for
a single CRYPTO_ONCE variable, e.g. to load config automatically or to not
load config automatically. Unfortunately the RUN_ONCE mechanism was not
correctly giving the right return value where an alternative init function
was being used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7983)
Fix some issues in tls13_hkdf_expand() which impact the above function
for TLSv1.3. In particular test that we can use the maximum label length
in TLSv1.3.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7755)
(cherry picked from commit 0fb2815b87)
If compile OpenSSL with SSL_DEBUG macro, some test cases will cause the
process crashed in the debug code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7707)
(cherry picked from commit 5a4481f0e0)
If the private key says it can only support one specific digest, then
don't ask it to perform a different one.
Fixes: #7348
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 2d263a4a73)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7609)
SSL_get_signature_nid() -- local signature algorithm
SSL_get_signature_type_nid() -- local signature algorithm key type
SSL_get_peer_tmp_key() -- Peer key-exchange public key
SSL_get_tmp_key -- local key exchange public key
Aliased pre-existing SSL_get_server_tmp_key(), which was formerly
just for clients, to SSL_get_peer_tmp_key(). Changed internal
calls to use the new name.
Reviewed-by: Matt Caswell <matt@openssl.org>
SSL(_CTX)?_set_client_CA_list() was a server side only function in 1.1.0.
If it was called on the client side then it was ignored. In 1.1.1 it now
makes sense to have a CA list defined for both client and server (the
client now sends it the the TLSv1.3 certificate_authorities extension).
Unfortunately some applications were using the same SSL_CTX for both
clients and servers and this resulted in some client ClientHellos being
excessively large due to the number of certificate authorities being sent.
This commit seperates out the CA list updated by
SSL(_CTX)?_set_client_CA_list() and the more generic
SSL(_CTX)?_set0_CA_list(). This means that SSL(_CTX)?_set_client_CA_list()
still has no effect on the client side. If both CA lists are set then
SSL(_CTX)?_set_client_CA_list() takes priority.
Fixes#7411
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7503)
(cherry picked from commit 9873297900)
TLSv1.3 is more restrictive about the curve used. There must be a matching
sig alg defined for that curve. Therefore if we are using some other curve
in our certificate then we should not negotiate TLSv1.3.
Fixes#7435
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7442)
(cherry picked from commit de4dc59802)
use_ecc() was always returning 1 because there are default (TLSv1.3)
ciphersuites that use ECC - even if those ciphersuites are disabled by
other options.
Fixes#7471
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7479)
(cherry picked from commit 589b6227a8)
Commit 9ef9088c15 switched the SSL/SSL_CTX
statistics counters to using Thread-Sanitizer-friendly primitives.
However, it erroneously converted an addition of -1
(for s->session_ctx->stats.sess_accept) to an addition of +1, since that
is the only counter API provided by the internal tsan_assist.h header
until the previous commit. This means that for each accepted (initial)
connection, the session_ctx's counter would get doubly incremented, and the
(switched) ctx's counter would also get incremented.
Restore the counter decrement so that each accepted connection increments
exactly one counter exactly once (in net effect).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7464)
(cherry picked from commit 2aaa0b146b)
In TLSv1.2 and below a CertificateRequest is sent after the Certificate
from the server. This means that by the time the client_cert_cb is called
on receipt of the CertificateRequest a call to SSL_get_peer_certificate()
will return the server certificate as expected. In TLSv1.3 a
CertificateRequest is sent before a Certificate message so calling
SSL_get_peer_certificate() returns NULL.
To workaround this we delay calling the client_cert_cb until after we
have processed the CertificateVerify message, when we are doing TLSv1.3.
Fixes#7384
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7413)
(cherry picked from commit e45620140f)
Since 1fb9fdc30 we may attempt to buffer a record from the next epoch
that has already been buffered. Prior to that this never occurred.
We simply ignore a failure to buffer a duplicated record.
Fixes#6902
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7414)
(cherry picked from commit 840facc3cc)
Previously when a ClientHello arrives with a valid cookie using
DTLSv1_listen() we only "peeked" at the message and left it on the
underlying fd. This works fine for single threaded applications but for
multi-threaded apps this does not work since the fd is typically reused for
the server thread, while a new fd is created and connected for the client.
By "peeking" we leave the message on the server fd, and consequently we
think we've received another valid ClientHello and so we create yet another
fd for the client, and so on until we run out of fds.
In this new approach we remove the ClientHello and buffer it in the SSL
object.
Fixes#6934
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7375)
(cherry picked from commit 079ef6bd53)
Rather than using init_buf we use the record layer read and write buffers
in DTLSv1_listen(). These seem more appropriate anyway and will help with
the next commit.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7375)
(cherry picked from commit 2fc4c77c3f)
The formula used for this is now
kVarianceBlocks = ((255 + 1 + md_size + md_block_size - 1) / md_block_size) + 1
Notice that md_block_size=64 for SHA256, which results on the
magic constant kVarianceBlocks = 6.
However, md_block_size=128 for SHA384 leading to kVarianceBlocks = 4.
CLA:trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7342)
(cherry picked from commit cb8164b05e)
If using an old style TLSv1.2 PSK callback then the maximum possible PSK
len is PSK_MAX_PSK_LEN (256) - not 64.
Fixes#7261
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7267)
(cherry picked from commit f39a02c68a)
Historically SSL_CTX_set_ssl_version() has reset the cipher list
to the default. Splitting TLS 1.3 ciphers to be tracked separately
caused a behavior change, in that TLS 1.3 cipher configuration was
preserved across calls to SSL_CTX_set_ssl_version(). To restore commensurate
behavior with the historical behavior, set the ciphersuites to the default as
well as setting the cipher list to the default.
Closes: #7226
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7270)
(cherry picked from commit 2340ed277b)
PR #3783 introduce coded to reset the server side SNI state in
SSL_do_handshake() to ensure any erroneous config time SNI changes are
cleared. Unfortunately SSL_do_handshake() can be called mid-handshake
multiple times so this is the wrong place to do this and can mean that
any SNI data is cleared later on in the handshake too.
Therefore move the code to a more appropriate place.
Fixes#7014
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7149)
Ideally, SSL_get_servername() would do exactly as it is documented
and return exactly what the client sent (i.e., what we currently
are stashing in the SSL's ext.hostname), without needing to refer
to an SSL_SESSION object. For historical reasons, including the
parsed SNI value from the ClientHello originally being stored in the
SSL_SESSION's ext.hostname field, we have had references to the
SSL_SESSION in this function. We cannot fully excise them due to
the interaction between user-supplied callbacks and TLS 1.2 resumption
flows, where we call all callbacks but the client did not supply an
SNI value. Existing callbacks expect to receive a valid SNI value
in this case, so we must fake one up from the resumed session in
order to avoid breakage.
Otherwise, greatly simplify the implementation and just return the
value in the SSL, as sent by the client.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7115)
Commit 1c4aa31d79 modified the state machine
to clean up stale ext.hostname values from SSL objects in the case when
SNI was not negotiated for the current handshake. This is natural from
the TLS perspective, since this information is an extension that the client
offered but we ignored, and since we ignored it we do not need to keep it
around for anything else.
However, as documented in https://github.com/openssl/openssl/issues/7014 ,
there appear to be some deployed code that relies on retrieving such an
ignored SNI value from the client, after the handshake has completed.
Because the 1.1.1 release is on a stable branch and should preserve the
published ABI, restore the historical behavior by retaining the ext.hostname
value sent by the client, in the SSL structure, for subsequent retrieval.
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7115)
The is_tls13_capable() function should not return 0 if no certificates
are configured directly because a certificate callback is present.
Fixes#7140
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7141)
If we've sent a close_notify then we are restricted about what we can do
in response to handshake messages that we receive. However we can sensibly
process NewSessionTicket messages. We can also process a KeyUpdate message
as long as we also ignore any request for us to update our sending keys.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7114)
If we have selected a ciphersuite using RSA key exchange then we must
not attempt to use an RSA-PSS cert for that.
Fixes#7059
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7099)
Treat a connection using an external PSK like we would a resumption and
send a single NewSessionTicket afterwards.
Fixes#6941
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7097)
If a client sends data to a server and then immediately closes without
waiting to read the NewSessionTickets then the server can receive EPIPE
when trying to write the tickets and never gets the opportunity to read
the data that was sent. Therefore we ignore EPIPE when writing out the
tickets in TLSv1.3
Fixes#6904
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6944)
They add a single item, so the names give a false impression of what
they do, making them hard to remember. Better to give them a somewhat
better name.
Fixes#6930
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6931)
Fixes#6994
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7009)
We need to ensure that the min-max version range we use when constructing
the ClientHello is the same range we use when we validate the version
selected by the ServerHello. Otherwise this may appear as a fallback or
downgrade.
Fixes#6964
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7013)
The TLS-1.3 ciphersuites must not be blocked by @SECLEVEL=3 even
though they are not explicitly marked as using DH/ECDH.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6959)
We already have SSL_set_post_handshake_auth(). This just adds the SSL_CTX
equivalent.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6938)
Having post handshake auth automatically switched on breaks some
applications written for TLSv1.2. This changes things so that an explicit
function call is required for a client to indicate support for
post-handshake auth.
Fixes#6933.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6938)
A client that has fallen back could detect an inappropriate fallback if
the TLSv1.3 downgrade protection sentinels are present.
Fixes#6756
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6894)
At certain points in the handshake we could receive either a plaintext or
an encrypted alert from the client. We should tolerate both where
appropriate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6887)
If we sent early_data and then received back an HRR, the enc_write_ctx
was stale resulting in errors if an alert needed to be sent.
Thanks to Quarkslab for reporting this.
In any case it makes little sense to encrypt alerts using the
client_early_traffic_secret, so we add special handling for alerts sent
after early_data. All such alerts are sent in plaintext.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6887)
Under certain error conditions a call to SSLfatal could accidently be
missed.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6872)
In some cases it's about redundant check for return value, in some
cases it's about replacing check for -1 with comparison to 0.
Otherwise compiler might generate redundant check for <-1. [Even
formatting and readability fixes.]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6860)
In some scenarios the connection could fail without an alert being sent.
This causes a later assertion failure.
Thanks to Quarkslab for reporting this.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6852)
Ensure that the certificate required alert actually gets sent (and doesn't
get translated into handshake failure in TLSv1.3).
Ensure that proper reason codes are given for the new TLSv1.3 alerts.
Remove an out of date macro for TLS13_AD_END_OF_EARLY_DATA. This is a left
over from an earlier TLSv1.3 draft that is no longer used.
Fixes#6804
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6809)
Commit 1c4aa31d79 changed how we process
and store SNI information during the handshake, so that a hostname is
only saved in the SSL_SESSION structure if that SNI value has actually
been negotiated. SSL_get_servername() was adjusted to match, with a new
conditional being added to handle the case when the handshake processing
is ongoing, and a different location should be consulted for the offered
SNI value. This was done in an attempt to preserve the historical
behavior of SSL_get_servername(), a function whose behavior only mostly
matches its documentation, and whose documentation is both lacking and
does not necessarily reflect the actual desired behavior for such an
API. Unfortunately, sweeping changes that would bring more sanity to
this space are not possible until OpenSSL 1.2.0, for ABI compatibility
reasons, so we must attempt to maintain the existing behavior to the
extent possible.
The above-mentioned commit did not take into account the behavior
of SSL_get_servername() during resumption handshakes for TLS 1.2 and
prior, where no SNI negotiation is performed. In that case we would
not properly parse the incoming SNI and erroneously return NULL as
the servername, when instead the logical session is associated with
the SNI value cached in the SSL_SESSION. (Note that in some cases an
SNI callback may not need to do anything in a TLS 1.2 or prior resumption
flow, but we are calling the callbacks and did not provide any guidance
that they should no-op if the connection is being resumed, so we must
handle this case in a usable fashion.) Update our behavior accordingly to
return the session's cached value during the handshake, when resuming.
This fixes the boringssl tests.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6792)
The API used to set what SNI value to send in the ClientHello
can also be used on server SSL objects, with undocumented and
un-useful behavior. Unfortunately, when generic SSL_METHODs
are used, s->server is still set, prior to the start of the
handshake, so we cannot prevent this nonsensical usage at the
present time. Leave a note to revisit this when ABI-breaking
changes are permitted.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)
In particular, adhere to the rule that we must not modify any
property of an SSL_SESSION object once it is (or might be) in
a session cache. Such modifications are thread-unsafe and have
been observed to cause crashes at runtime.
To effect this change, standardize on the property that
SSL_SESSION->ext.hostname is set only when that SNI value
has been negotiated by both parties for use with that session.
For session resumption this is trivially the case, so only new
handshakes are affected.
On the client, the new semantics are that the SSL->ext.hostname is
for storing the value configured by the caller, and this value is
used when constructing the ClientHello. On the server, SSL->ext.hostname
is used to hold the value received from the client. Only if the
SNI negotiation is successful will the hostname be stored into the
session object; the server can do this after it sends the ServerHello,
and the client after it has received and processed the ServerHello.
This obviates the need to remove the hostname from the session object
in case of failed negotiation (a change that was introduced in commit
9fb6cb810b in order to allow TLS 1.3
early data when SNI was present in the ClientHello but not the session
being resumed), which was modifying cached sessions in certain cases.
(In TLS 1.3 we always produce a new SSL_SESSION object for new
connections, even in the case of resumption, so no TLS 1.3 handshakes
were affected.)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)
These tiny functions only read from the input SSL, and we are
about to use them from functions that only have a const SSL* available,
so propagate const a bit further.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)
The spec says that a client MUST set legacy_version to TLSv1.2, and
requires servers to verify that it isn't SSLv3.
Fixes#6600
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6747)
Using the rsa_pss_rsae_sha256 sig alg should imply that the key OID is
rsaEncryption. Similarly rsa_pss_pss_sha256 implies the key OID is
rsassaPss. However we did not check this and incorrectly tolerated a key
OID that did not match the sig alg sent by the peer.
Fixes#6611
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6732)
If we issue new tickets due to post-handshake authentication there is no
reason to remove previous tickets from the cache. The code that did that
only removed the last session anyway - so if more than one ticket got
issued then those other tickets are still valid.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)
Check that we are either configured for PSK, or that we have a TLSv1.3
capable certificate type. DSA certs can't be used in TLSv1.3 and we
don't (currently) allow GOST ones either (owing to the lack of standard
sig algs).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6650)
Previoulsy we just had max_early_data which controlled both the value of
max early_data that we advertise in tickets *and* the amount of early_data
that we are willing to receive from clients. This doesn't work too well in
the case where we want to reduce a previously advertised max_early_data
value. In that case clients with old, stale tickets may attempt to send us
more early data than we are willing to receive. Instead of rejecting the
early data we abort the connection if that happens.
To avoid this we introduce a new "recv_max_early_data" value. The old
max_early_data becomes the value that is advertised in tickets while
recv_max_early_data is the maximum we will tolerate from clients.
Fixes#6647
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6655)
In TLSv1.2 and below we should remove an old session from the client
session cache in the event that we receive a new session ticket from the
server.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6601)
This also adds the ability to control this through s_server
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6469)
