INSTALL_PREFIX is a confusing name, as there's also --prefix.
Instead, tag along with the rest of the open source world and adopt
the Makefile variable DESTDIR to designate the desired staging
directory.
The Configure option --install_prefix is removed, the only way to
designate a staging directory is with the Makefile variable (this is
also implemented for VMS' descrip.mms et al).
Reviewed-by: Rich Salz <rsalz@openssl.org>
apps/progs.pl counted on the caller to provide the exact command
files. The unified build doesn't have that knowledge, and the easier
and more flexible thing to do is to feed it all the apps/*.c files and
let it figure out the command names by looking inside (looking for
/int ([a-z0-9][a-z0-9_]*)_main\(int argc,/).
Also, add it to the generate command, since it's a versioned file.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Once upon a time, there was chop, which somply chopped off the last
character of $_ or a given variable, and it was used to take off the
EOL character (\n) of strings.
... but then, you had to check for the presence of such character.
So came chomp, the better chop which checks for \n before chopping it
off. And this worked well, as long as Perl made internally sure that
all EOLs were converted to \n.
These days, though, there seems to be a mixture of perls, so lines
from files in the "wrong" environment might have \r\n as EOL, or just
\r (Mac OS, unless I'm misinformed).
So it's time we went for the more generic variant and use s|\R$||, the
better chomp which recognises all kinds of known EOLs and chops them
off.
A few chops were left alone, as they are use as surgical tools to
remove one last slash or one last comma.
NOTE: \R came with perl 5.10.0. It means that from now on, our
scripts will fail with any older version.
Reviewed-by: Rich Salz <rsalz@openssl.org>
To enable heartbeats for DTLS, configure with enable-heartbeats.
Heartbeats for TLS have been completely removed.
This addresses RT 3647
Reviewed-by: Richard Levitte <levitte@openssl.org>
Error codes are printed in hex, and previous OpenSSL versions expected
the error codes to be provided to errstr in hex. In 1.1.0, for some
reason, it was expecting them to be decimal.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Because some platforms won't will in any value in ai_protocol, there's
no point using it if we already know what it should be.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It seems that some platforms' getaddrinfo don't fill in the
ai_protocol field properly. On those, the assertion
'protocol == BIO_ADDRINFO_protocol(res)' will fail. Best to remove
it.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
If init failed we'd like to set an error code to indicate that. But if
init failed then when the error system tries to load its strings its going
to fail again. We could get into an infinite loop. Therefore we just set
a single error the first time around. After that no error is set.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The new init functions can fail if the library has already been stopped. We
should be able to indicate failure with a 0 return value.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This was a developer debugging feature and was never a useful public
interface.
Added all missing X509 error codes to the verify(1) manpage, but
many still need a description beyond the associated text string.
Sorted the errors in x509_txt.c by error number.
Reviewed-by: Stephen Henson <steve@openssl.org>
The old building scripts get removed, they are hopelessly gone in bit
rot by now.
Also remove the old symbol hacks. They were needed needed to shorten
some names to 31 characters, and to resolve other symbol clashes.
Because we now compile with /NAMES=(AS_IS,SHORTENED), this is no
longer required.
Reviewed-by: Rich Salz <rsalz@openssl.org>
As part of this, change util/mkdef.pl to stop adding libraries to
depend on in its output. mkdef.pl should ONLY output a symbol
vector.
Because symbol names can't be longer than 31 characters, we use the
compiler to shorten those that are longer down to 23 characters plus
an 8 character CRC. To make sure users of our header files will pick
up on that automatically, add the DEC C supported extra headers files
__decc_include_prologue.h and __decc_include_epilogue.h.
Furthermore, we add a config.com, so VMS people can configure just as
comfortably as any Unix folks, thusly:
@config
Reviewed-by: Rich Salz <rsalz@openssl.org>
In build.info files, make the include directory in the build directory
absolute, or Configure will think it should be added to the source
directory top. Configure will turn it into a relative path if
possible.
Reviewed-by: Rich Salz <rsalz@openssl.org>
* added missing help option messages
* ecdh_single option is removed as it is a no-op and not an option
supported in earlier versions
* ssl_ctx_security_debug() was invoked before ctx check for NULL
* trusted_first option can be removed, as it is always enabled in 1.1.
But not removed the option, require confirmation.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
As documented both SSL_get0_dane_authority() and SSL_get0_dane_tlsa()
are expected to return a negative match depth and nothing else when
verification fails. However, this only happened when verification
failed during chain construction. Errors in verification of the
constructed chain did not have the intended effect on these functions.
This commit updates the functions to check for verify_result ==
X509_V_OK, and no longer erases any accumulated match information
when chain construction fails. Sophisticated developers can, with
care, use SSL_set_verify_result(ssl, X509_V_OK) to "peek" at TLSA
info even when verification fail. They must of course first check
and save the real error, and restore the original error as quickly
as possible. Hiding by default seems to be the safer interface.
Introduced X509_V_ERR_DANE_NO_MATCH code to signal failure to find
matching TLSA records. Previously reported via X509_V_ERR_CERT_UNTRUSTED.
This also changes the "-brief" output from s_client to include
verification results and TLSA match information.
Mentioned session resumption in code example in SSL_CTX_dane_enable(3).
Also mentioned that depths returned are relative to the verified chain
which is now available via SSL_get0_verified_chain(3).
Added a few more test-cases to danetest, that exercise the new
code.
Resolved thread safety issue in use of static buffer in
X509_verify_cert_error_string().
Fixed long-stating issue in apps/s_cb.c which always sets verify_error
to either X509_V_OK or "chain to long", code elsewhere (e.g.
s_time.c), seems to expect the actual error. [ The new chain
construction code is expected to correctly generate "chain
too long" errors, so at some point we need to drop the
work-arounds, once SSL_set_verify_depth() is also fixed to
propagate the depth to X509_STORE_CTX reliably. ]
Reviewed-by: Rich Salz <rsalz@openssl.org>
dgst: using digest instead of specific digest commands
the digest list specified in man dgst may be inaccurate, hence using
digest and referring to the list in digest-commands
'sha' as a digest name is no longer supported
dgst,pkeyutl cmds help cleanup
- In dgst, pkeyutl cmds, some options help was missing.
- fixed a minor typo in openssl.pod, that fixes make install.
- digest-commands was showing ‘sha’, which is not a supported digest
anymore.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
opt_valtype 0 is same as '-' while printing cmd usage
asn1parse/ca/ciphers help cleanup
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Some time ago, we had a ex_libs configuration setting that could be
divided into lflags and ex_libs. These got divided in two settings,
lflags and ex_libs, and the former was interpreted to be general
linking flags.
Unfortunately, that conclusion wasn't entirely accurate. Most of
those linking were meant to end up in a very precise position on the
linking command line, just before the spec of libraries the linking
depends on.
Back to the drawing board, we're diving things further, now having
lflags, which are linking flags that aren't depending on command line
position, plib_lflags, which are linking flags that should show up just
before the spec of libraries to depend on, and finally ex_libs, which
is the spec of extra libraries to depend on.
Also, documentation is changed in Configurations/README. This was
previously forgotten.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Allow initial engine names as first parameters before flags.
Also add engine param to help summary
Wrote manpage
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The DTLSv1_listen function exposed details of the underlying BIO
abstraction and did not properly allow for IPv6. This commit changes the
"peer" argument to be a BIO_ADDR and makes it a first class function
(rather than a ctrl) to ensure proper type checking.
Reviewed-by: Richard Levitte <levitte@openssl.org>
s_socket.c gets brutally cleaned out and now consists of only two
functions, one for client and the other for server. They both handle
AF_INET, AF_INET6 and additionally AF_UNIX where supported. The rest
is just easy adaptation.
Both s_client and s_server get the new flags -4 and -6 to force the
use of IPv4 or IPv6 only.
Also, the default host "localhost" in s_client is removed. It's not
certain that this host is set up for both IPv4 and IPv6. For example,
Debian has "ip6-localhost" as the default hostname for [::1]. The
better way is to default |host| to NULL and rely on BIO_lookup() to
return a BIO_ADDRINFO with the appropriate loopback address for IPv4
or IPv6 as indicated by the |family| parameter.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The control commands that previously took a struct sockaddr * have
been changed to take a BIO_ADDR * instead.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
CRIME protection: disable compression by default, even if OpenSSL is
compiled with zlib enabled. Applications can still enable compression by
calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by using
the SSL_CONF library to configure compression. SSL_CONF continues to
work as before:
SSL_CONF_cmd(ctx, "Options", "Compression") enables compression.
SSL_CONF_cmd(ctx, "Options", "-Compression") disables compression (now
no-op by default).
The command-line switch has changed from -no_comp to -comp.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Also fix option processing in pkeyutl to allow use of (formerly)
"out-of-order" switches that were needless implementation limitations.
Handle documented "ENGINE" form with -keyform and -peerform.
Better handling of OPENSSL_NO_ENGINE and OPENSSL_NO_RSA.
RT2018
Reviewed-by: Rich Salz <rsalz@openssl.org>
PACKET contents should be read-only. To achieve this, also
- constify two user callbacks
- constify BUF_reverse.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Now that we have the foundation for the "unified" build scheme in
place, we add build.info files. They have been generated from the
Makefiles in the same directories. Things that are platform specific
will appear in later commits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This includes basic constraints, key usages, issuer EKUs and auxiliary
trust OIDs (given a trust suitably related to the intended purpose).
Added tests and updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Not all architectures have a time_t defined the same way. To make
sure we get the same result, we need to cast &checkoffset to (intmax_t *)
and make sure that intmax_t is defined somehow.
To make really sure we don't pass a variable with the wrong size down
to opt_imax(), we use a temporary intmax_t.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The lflags configuration had a weird syntax with a % as separator. If
it was present, whatever came before ended up as PEX_LIBS in Makefile
(usually, this is LDFLAGS), while whatever came after ended up as
EX_LIBS.
This change splits that item into lflags and ex_libs, making their use
more explicit.
Also, PEX_LIBS in all the Makefiles are renamed to LDFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This extends the existing async functionality to SSL_shutdown(), i.e.
SSL_shutdown() can now casuse an SSL_ERROR_WANT_ASYNC error to be returned
from SSL_get_error() if async mode has been enabled.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Many options for supporting optimizations for legacy crypto on legacy
platforms have been removed. This simplifies the source code and
does not really penalize anyone.
DES_PTR (always on)
DES_RISC1, DES_RISC2 (always off)
DES_INT (always 'unsigned int')
DES_UNROLL (always on)
BF_PTR (always on) BF_PTR2 (removed)
MD2_CHAR, MD2_LONG (always 'unsigned char')
IDEA_SHORT, IDEA_LONG (always 'unsigned int')
RC2_SHORT, RC2_LONG (always 'unsigned int')
RC4_LONG (only int and char (for assembler) are supported)
RC4_CHUNK (always long), RC_CHUNK_LL (removed)
RC4_INDEX (always on)
And also make D_ENCRYPT macro more clear (@appro)
This is done in consultation with Andy.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Now that we're using templates, we should warn people not to edit the
resulting file. We do it through util/dofile.pl, which is enhanced
with an option to tell what file it was called from. We also change
the calls so the template files are on the command line instead of
being redirected through standard input. That way, we can display
something like this (example taken from include/openssl/opensslconf.h):
/* WARNING: do not edit! */
/* Generated by Configure from include/openssl/opensslconf.h.in */
Reviewed-by: Rich Salz <rsalz@openssl.org>
apps/CA.pl and tools/c_rehash are built from template files. So far,
this was done by Configure, which created its own problems as it
forced everyone to reconfigure just because one of the template files
had changed.
Instead, have those files created as part of the normal build in apps/
and in tools/.
Furthermore, this prepares for a future where Configure may produce
entirely other build files than Makefile, and the latter can't be
guaranteed to be the holder of all information for other scripts.
Instead, configdata.pm (described below) becomes the center of
configuration information.
This introduces a few new things:
%config a hash table to hold all kinds of configuration data
that can be used by any other script.
configdata.pm a perl module that Configure writes. It currently
holds the hash tables %config and %target.
util/dofile.pl a script that takes a template on STDIN and outputs
the result after applying configuration data on it.
It's supposed to be called like this:
perl -I$(TOP) -Mconfigdata < template > result
or
perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result
Note: util/dofile.pl requires Text::Template.
As part of this changed, remove a number of variables that are really
just copies of entries in %target, and use %target directly. The
exceptions are $target{cflags} and $target{lflags}, they do get copied
to $cflags and $lflags. The reason for this is that those variable
potentially go through a lot of changes and would rather deserve a
place in %config. That, however, is for another commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The code is trying to interpolate the value of the BASE_SECTION macro,
but due to excess escaping, it instead prints the string "BASE_SECTION".
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
It is sometimes useful (especially in automated tests) to supply
multiple trusted or untrusted certificates via separate files rather
than have to prepare a single file containing them all.
To that end, change verify(1) to accept these options zero or more
times. Also automatically set -no-CAfile and -no-CApath when
-trusted is specified.
Improve verify(1) documentation, which could still use some work.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename 'update' to 'generate'. Rather than recurse, just explicitly
call the three generate targets directly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Some users want to disable SSL 3.0/TLS 1.0/TLS 1.1, and enable just
TLS 1.2. In the future they might want to disable TLS 1.2 and
enable just TLS 1.3, ...
This commit makes it possible to disable any or all of the TLS or
DTLS protocols. It also considerably simplifies the SSL/TLS tests,
by auto-generating the min/max version tests based on the set of
supported protocols (425 explicitly written out tests got replaced
by two loops that generate all 425 tests if all protocols are
enabled, fewer otherwise).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove lint, tags, dclean, tests.
This is prep for a new makedepend scheme.
This is temporary pending unified makefile, and might help it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The entropy-gathering daemon is used only on a small number of machines.
Provide a configure knob so that EGD support can be disabled by default
but re-enabled on those systems that do need it.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
It turns out that -pause calls the undocumented function SSL_set_debug.
That just sets flag inside the SSL structure. That flag, despite
the command is never used. So remove the flag, the field, and the
function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Tell open() O_BINARY on VMS doesn't make sense, as it's possible to
use more precise file attributes. However, if we're still going to
fdopen() it in binary mode, we must set the fd in binary context.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Well, I'm not actually changing time_t, just changing how time_t
valued opt values are converted from string to time_t.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Create Makefile's from Makefile.in
Rename Makefile.org to Makefile.in
Rename Makefiles to Makefile.in
Address review feedback from Viktor and Richard
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Implement range-checking in all counts in apps. Turns out only a couple
of cases were missing. And make the range-checking code more strict.
Replace almost all opt_ulong() calls with opt_long()
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Make LHASH_OF use static inline functions.
Add new lh_get_down_load and lh_set_down_load functions and their
typesafe inline equivalents.
Make lh_error a function instead of a macro.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Commit 189ae368d9 (RT ticket 3352) provided the capability to output
session key data in NSS format. The big apps cleanup broke that capability.
This commit restores it.
RT#4201
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
(Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.
Reviewed-by: Richard Levitte <levitte@openssl.org>
DTLS cookie generation and verification were exact copies of each
other save the last few lines. This refactors them to avoid code
copying.
Reviewed-by: Matt Caswell <matt@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
s_server was trying to set the ECDH curve when no-ec was defined. This also
highlighted the fact that the -no_ecdhe option to s_server is broken, and
doesn't make any sense any more (ECDHE is on by default and the only way it
can be disabled is through the cipherstring). Therefore this commit removes
the option.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
When processing a public key input via "-pubin", "private" was
sometimes erroneously set, or else not set and incorrectly asserted.
Reviewed-by: Rich salz <rsalz@openssl.org>
This change required some special treatment, as HMAC is intertwined
with EVP_MD. For now, all local HMAC_CTX variables MUST be
initialised with HMAC_CTX_EMPTY, or whatever happens to be on the
stack will be mistaken for actual pointers to EVP_MD_CTX. This will
change as soon as HMAC_CTX becomes opaque.
Also, since HMAC_CTX_init() can fail now, its return type changes from
void to int, and it will return 0 on failure, 1 on success.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In theory the pthreads approach for Thread Local Storage should be more
portable.
This also changes some APIs in order to accommodate this change. In
particular ASYNC_init_pool is renamed ASYNC_init_thread and
ASYNC_free_pool is renamed ASYNC_cleanup_thread. Also introduced ASYNC_init
and ASYNC_cleanup.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If an async event occurs during a renegotiation in SSL_read then s_server
was looping around, detecting we were in init and calling
init_ssl_connection instead of re-calling SSL_read.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Initial API implemented for notifying applications that an ASYNC_JOB
has completed. Currently only s_server is using this. The Dummy Async
engine "cheats" in that it notifies that it has completed *before* it
pauses the job. A normal async engine would not do that.
Only the posix version of this has been implemented so far, so it will
probably fail to compile on Windows at the moment.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It is expensive to create the ASYNC_JOB objects due to the "makecontext"
call. This change adds support for pools of ASYNC_JOB objects so that we
don't have to create a new ASYNC_JOB every time we want to use one.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The s_server option -WWW was not async aware, and therefore was not
handling SSL_ERROR_WANT_ASYNC conditions. This commit fixes that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A new -async option is added which activates SSL_MODE_ASYNC. Also
SSL_WANT_ASYNC errors are handled appropriately.
Reviewed-by: Rich Salz <rsalz@openssl.org>
SSL_state has been replaced by SSL_get_state and SSL_set_state is no longer
supported.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
s_server was (ab)using SSL_set_state to force a renegotiation. This is a
bad way to do things and does not work with the new state machine code, so
we need to do it a different way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Clean up and remove lots of code that is now no longer needed due to the
move to the new state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Check for Host header in query_responder instead of process_responder. This
also fixes a memory leak in the old code if the headers was NULL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
When using command line applications errors occur when trying to
load engines specified in a config file. Introduced by commit
a0a82324f9
RT#4093
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Previous OpenSSL versions used -set_serial, but master was using
-set-serial - so rename it back to the old version.
RT#4059
Reviewed-by: Richard Levitte <levitte@openssl.org>
Loading the config file after processing command line options can
cause problems, e.g. where an engine provides new ciphers/digests
these are not then recoginised on the command line. Move the
default config file loading to before the command line option
processing. Whilst we're doing this we might as well centralise
this instead of doing it individually for each application. Finally
if we do it before the OpenSSL_add_ssl_algorithms() call then
ciphersuites provided by an engine (e.g. GOST) can be available to
the apps.
RT#4085
RT#4086
Reviewed-by: Richard Levitte <levitte@openssl.org>
There used to be options -macopt and -sigopt in <=1.0.2 for the dgst
command line app. These were incorrectly spelled as -macop and -sigop in
master.
RT#4072
Reviewed-by: Andy Polyakov <appro@openssl.org>
Note that this commit constifies a user callback parameter and therefore
will break compilation for applications using this callback. But unless
they are abusing write access to the buffer, the fix is trivial.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Even though SOCKET is effectively declared as (void *) on Windows, it's
not actually a pointer, but an index within per-process table of
kernel objects. The table size is actually limited and its upper limit
is far below upper limit for signed 32-bit integer. This is what makes
cast in question possible.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
For those command line options that take the verification options
-CApath and -CAfile, if those options are absent then the default path or
file is used instead. It is not currently possible to specify *no* path or
file at all. This change adds the options -no-CApath and -no-CAfile to
specify that the default locations should not be used to all relevant
applications.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Use sockaddr_storage not sockaddr for the client IP address to allow for
IPv6.
Also fixed a section of code which was conditional on OPENSSL_NO_DTLS1
which should not have been.
Reviewed-by: Andy Polyakov <appro@openssl.org>
DTLSv1_listen is a commonly used function within DTLS solutions for
listening for new incoming connections. This commit adds support to s_server
for using it.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The -srpvfile option was broken in the srp command line app. Using it would
always result in "-dbfile and -configfile cannot be specified together."
The error message is also wrong because the option is "-srpvfile" not
"-dbfile", so that has been fixed too.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Have a look at the directories in crypto/, I found reason to add
checks on CMAC and HMAC. This might be completely irrelevant, but I
prefered covering too much than not enough.
Reviewed-by: Stephen Henson <steve@openssl.org>
A grep of OPENSSL_NO_ in the rest of the source tree revealed a few
more features to check.
NOTE: there are some of those macros that I ignore because a check of
them doesn't seem useful to external apps. This might change later on.
Reviewed-by: Stephen Henson <steve@openssl.org>
After a grep of OPENSSL_NO_ in apps/*.c, a few more features that may
be interesting to check the availability of came up.
Reviewed-by: Stephen Henson <steve@openssl.org>
New option "openssl list -disabled" this lists a set of disabled features
in a form which can be conveniently parsed by the test framework so it
knows which tests to skip.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If the field separator isn't specified through -nameopt then use
XN_FLAG_SEP_CPLUS_SPC instead of printing nothing and returing an error.
PR#2397
Reviewed-by: Tim Hudson <tjh@openssl.org>
Both now warn once if directory isn't writeable.
Both now warn on file-write errors (multiple times).
Update manpage to describe both program and script correctly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
