Split PSS parameter creation. This adds a new function rsa_pss_params_create
which creates PSS parameters from digest and salt values. This will be
used for PSS key generation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
Make RSA method more flexible by using the key type from the
method instead of hard coding EVP_PKEY_RSA: by doing this the
same code supports both RSA and RSA-PSS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
Store hash algorithm used for MGF1 masks in PSS and OAEP modes in PSS and
OAEP parameter structure: this avoids the need to decode part of the ASN.1
structure every time it is used.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
More importantly, port CRL test from boringSSL crypto/x509/x509_test.cc
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1775)
$1<<32>>32 worked fine with either 32- or 64-bit perl for a good while,
relying on quirk that [pure] 32-bit perl performed it as $1<<0>>0. But
this apparently changed in some version past minimally required 5.10,
and operation result became 0. Yet, it went unnoticed for another while,
because most perl package providers configure their packages with
-Duse64bitint option.
Reviewed-by: Rich Salz <rsalz@openssl.org>
On all platforms, if the controlling tty isn't an actual tty, this is
flagged by setting is_a_tty to zero... except on VMS, where this was
treated as an error. Change this to behave like the other platforms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2063)
There is code that retries calling RAND_bytes() until it gets something
other than 0, which just hangs if we always return 0.
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #2041
If on a non-tty stdin, TTY_get() will fail with errno == ENODEV.
We didn't catch that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2039)
TTY_get() sometimes surprises us with new errno values to determine if
we have a controling terminal or not. This generated error is a
helpful tool to figure out that this was what happened and what the
unknown value is.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2043)
Since there are many parts of UI_process() that can go wrong, it isn't
very helpful to only return -1 with no further explanation. With this
change, the error message will at least show which part went wrong.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2037)
GH issue #1916 affects only big-endian platforms. TLS is not affected,
because TLS fragment is never big enough.
Reviewed-by: Matt Caswell <matt@openssl.org>
The bug was introduced in 80d27cdb84,
one too many instructions was removed. It went unnoticed, because
new subroutine introduced in previous commit is called in real-life
RSA/DSA/DH cases, while original code is called only in rare tests.
The bug was caught in test_fuzz.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It's called with 0 when it's already locked, with 1 when it's not.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1500
In non-__KERNEL__ context 32-bit-style __ARMEB__/__ARMEL__ macros were
set in arm_arch.h, which is shared between 32- and 64-bit builds. Since
it's not included in __KERNEL__ case, we have to adhere to official
64-bit pre-defines, __AARCH64EB__/__AARCH64EL__.
[If we are to share more code, it would need similar adjustment.]
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Both strdup or malloc failure should raise à err.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1905)
This reflects its position in include/openssl/ct.h.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1548)
Otherwise, |dec| gets moved past the end of the signature by
o2i_SCT_signature and then can't be correctly freed afterwards.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1548)
Factorise multiple bn_get_top(group->field) calls
Add missing checks on some conditional BN_copy return value
Add missing checks on some BN_copy return value
Add missing checks on a few bn_wexpand return value
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1626)
Do not call the time "current", as a different time can be provided.
For example, a time slightly in the future, to provide tolerance for
CT logs with a clock that is running fast.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1554)
Under certain circumstances, the libcrypto init code would loop,
causing a deadlock. This would typically happen if something in
ossl_init_base() caused an OpenSSL error, and the error stack routines
would recurse into the init code before the flag that ossl_init_base()
had been run was checked.
This change makes sure ossl_init_base isn't run once more of the base
is initiated.
Thanks to Dmitry Kostjuchenko for the idea.
Fixes Github issue #1899
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1922)
prio openssl 1.1.0 seed_len < q was accepted and the seed argument was
then ignored. Now DSA_generate_parameters_ex() returns an error in such
a case but no error string.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1657)
This reverts commit 349d1cfddc.
The proposed fix is incorrect. It marks the "run_once" code as having
finished before it has. The intended semantics of run_once is that no
threads should proceed until the code has run exactly once. With this
change the "second" thread will think the run_once code has already been
run and will continue, even though it is still in progress. This could
result in a crash or other incorrect behaviour.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Fixed deadlock in CRYPTO_THREAD_run_once() if call to init() is causing
a recursive call to CRYPTO_THREAD_run_once() again that is causing a hot
deadloop inside do { } while (result == ONCE_ININIT); section.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1913)
llvm's ubsan reported:
runtime error: negation of -9223372036854775808 cannot be represented in
type 'int64_t' (aka 'long'); cast to an unsigned type to negate this
value to itself
Found using libfuzzer
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1908
In order to minimize dependency on assembler version a number of
post-SSE2 instructions are encoded manually. But in order to simplify
the procedure only register operands are considered. Non-register
operands are passed down to assembler. Module in question uses pshufb
with memory operands, and old [GNU] assembler can't handle it.
Fortunately in this case it's possible skip just the problematic
segment without skipping SSSE3 support altogether.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
When configured no-dso, there are no DSO_{whatever} macros defined.
Therefore, before checking those, you have to check if OPENSSL_NO_DSO
is defined.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1902)
Now that we can link specifically with static libraries, the immediate
need to split ppccap.c (and eventually other *cap.c files) is no more.
This reverts commit e3fb4d3d52.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't set choice selector on parse failure: this can pass unexpected
values to the choice callback. Instead free up partial structure
directly.
CVE-2016-7053
Thanks to Tyler Nighswander of ForAllSecure for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The offset to the memory to clear was incorrect, causing a heap buffer
overflow.
CVE-2016-7054
Thanks to Robert Święcki for reporting this
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some of stone-age assembler can't cope with r0 in address. It's actually
sensible thing to do, because r0 is shunted to 0 in address arithmetic
and by refusing r0 assembler effectively makes you understand that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
At the moment you can only do an HKDF Extract and Expand in one go. For
TLS1.3 we need to be able to do an Extract first, and the subsequently do
a number of Expand steps on the same PRK.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Having that code in one central object file turned out to cause
trouble when building test/modes_internal_test.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1883)
BN_RECP_CTX_new direclty use bn_init to avoid twice memset calls
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1879)
RFC 3447, section 8.2.2, steps 3 and 4 states that verifiers must encode
the DigestInfo struct and then compare the result against the public key
operation result. This implies that one and only one encoding is legal.
OpenSSL instead parses with crypto/asn1, then checks that the encoding
round-trips, and allows some variations for the parameter. Sufficient
laxness in this area can allow signature forgeries, as described in
https://www.imperialviolet.org/2014/09/26/pkcs1.html
Although there aren't known attacks against OpenSSL's current scheme,
this change makes OpenSSL implement the algorithm as specified. This
avoids the uncertainty and, more importantly, helps grow a healthy
ecosystem. Laxness beyond the spec, particularly in implementations
which enjoy wide use, risks harm to the ecosystem for all. A signature
producer which only tests against OpenSSL may not notice bugs and
accidentally become widely deployed. Thus implementations have a
responsibility to honor the specification as tightly as is practical.
In some cases, the damage is permanent and the spec deviation and
security risk becomes a tax all implementors must forever pay, but not
here. Both BoringSSL and Go successfully implemented and deployed
RSASSA-PKCS1-v1_5 as specified since their respective beginnings, so
this change should be compatible enough to pin down in future OpenSSL
releases.
See also https://tools.ietf.org/html/draft-thomson-postel-was-wrong-00
As a bonus, by not having to deal with sign/verify differences, this
version is also somewhat clearer. It also more consistently enforces
digest lengths in the verify_recover codepath. The NID_md5_sha1 codepath
wasn't quite doing this right.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1474
All of these don't compile cleanly any more, probably haven't for quite
some time
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1789)
Instead of deliberately leaking a reference to ourselves, use nodelete
which does this more neatly. Only for Linux at the moment.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Because we use atexit() to cleanup after ourselves, this will cause a
problem if we have been dynamically loaded and then unloaded again: the
atexit() handler may no longer be there.
Most modern atexit() implementations can handle this, however there are
still difficulties if libssl gets unloaded before libcrypto, because of
the atexit() callback that libcrypto makes to libssl.
The most robust solution seems to be to ensure that libcrypto and libssl
never unload. This is done by simply deliberately leaking a dlopen()
reference to them.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This works the same way as DSO_pathbyaddr() but instead returns a ptr to
the DSO that contains the provided symbol.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Commit 3d8b2ec42 removed various unused functions. However now we need to
use one of them! This commit resurrects DSO_pathbyaddr(). We're not going to
resurrect the Windows version though because what we need to achieve can be
done a different way on Windows.
Reviewed-by: Tim Hudson <tjh@openssl.org>
After the recent reworking, not everything matched up, and some
comments didn't catch up to the outl-->dlen and inl-->dlen renames
that happened during the development of the recent patches.
Try to make parameter names consistent across header, implementation,
and manual pages.
Also remove some trailing whitespace that was inadvertently introduced.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1798)
In converting a new style BIO_read() call into an old one, read
as much data as we can (INT_MAX), if the size of the buffer is
>INT_MAX.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The __DragonFly__ macros were introduced in issue #1546 along with a
function naming fix, but it was decided they should be handled
separately.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1765)
Only set the load_crypto_strings_inited to 1 when err_load_crypto_strings_int was called.
This solves the following issue:
- openssl is built with no-err
- load_crypto_strings_inited is set to 1 during the OPENSSL_init_crypto call
- During the cleanup: OPENSSL_cleanup, err_free_strings_int is called because load_crypto_strings_inited == 1
- err_free_strings_int calls do_err_strings_init because it has never been called
- Now do_err_strings_init calls OPENSSL_init_crypto
- But since we are in the cleanup (stopped == 1) this results in an error:
CRYPTOerr(CRYPTO_F_OPENSSL_INIT_CRYPTO, ERR_R_INIT_FAIL);
- which then tries to initialize everything we are trying to clean up: ERR_get_state, ossl_init_thread_start, etc
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1654)
crypto/asn1/asn1_item_list.c needed including dh.h and rsa.h directly.
The reason is that they are not included by x509.h when configured
'no-deprecated'
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1741)
crypto/s390xcap.c: internal/cryptlib.h needs to be included for
OPENSSL_cpuid_setup function prototype is located there to avoid
build error due to -Werror=missing-prototypes.
Signed-off-by: Patrick Steuer <psteuer@mail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
CLA: trivial
crypto/evp/e_aes.c: Types of inp and out parameters of
AES_xts_en/decrypt functions need to be changed from char to
unsigned char to avoid build error due to
'-Werror=incompatible-pointer-types'.
crypto/aes/asm/aes-s390x.pl: Comments need to reflect the above
change.
Signed-off-by: Patrick Steuer <psteuer@mail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
CLA: trivial
crypto/asn1/a_strex.c: Type of width variable in asn1_valid_host
function needs to be changed from char to signed char to avoid
build error due to '-Werror=type-limits'.
Signed-off-by: Patrick Steuer <psteuer@mail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
CLA: trivial
Don't rely on embedded flag to free strings correctly: it wont be
set if there is a malloc failure during initialisation.
Thanks to Guido Vranken for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1725)
If len == 0 in a call to ERR_error_string_n() then we can read beyond the
end of the buffer. Really applications should not be calling this function
with len == 0, but we shouldn't be letting it through either!
Thanks to Agostino Sarubbo for reporting this issue. Agostino's blog on
this issue is available here:
https://blogs.gentoo.org/ago/2016/10/14/openssl-libcrypto-stack-based-buffer-overflow-in-err_error_string_n-err-c/
Reviewed-by: Richard Levitte <levitte@openssl.org>
The original X509_NAME decode free code was buggy: this
could result in double free or leaks if a malloc failure
occurred.
Simplify and fix the logic.
Thanks to Guido Vranken for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1691)
Align at 5 characters, not 4. There are 5-digit numbers in the output.
Also avoid emitting an extra blank line and trailing whitespace.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got
them after the reformat. This is the result of:
find . -name '*.pl' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.c' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.h' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
Then bn_prime.h was excluded since this is a generated file.
Note mkerr.pl has some changes in a heredoc for some help output, but
other lines there lack trailing whitespace too.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Tidy up srp_Calc_k and SRP_Calc_u by making them a special case of
srp_Calc_xy which performs SHA1(PAD(x) | PAD(y)).
This addresses an OCAP Audit issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If a STACK (corresponding to SEQUENCE OF or SET OF) is NULL then the
field is absent as opposed to empty (present but has zero elements).
Reviewed-by: Rich Salz <rsalz@openssl.org>
OCSP_RESPID was made opaque in 1.1.0, but no accessors were provided for
setting the name/key value for the OCSP_RESPID.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If OPENSSL_sk_insert() calls OPENSSL_realloc() and it fails, it was leaking
the originally allocated memory.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We should check the last BN_CTX_get() call to ensure that it isn't NULL
before we try and use any of the allocated BIGNUMs.
Issue reported by Shi Lei.
Reviewed-by: Richard Levitte <levitte@openssl.org>
We were casting num_alloc to size_t in lots of places, or just using it in
a context where size_t makes more sense - so convert it. This simplifies
the code a bit.
Also tweak the style in stack.c a bit following on from the previous
commit
Reviewed-by: Rich Salz <rsalz@openssl.org>
APP_INFO is currently a field of MEM struct.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1583)
The internal SRP function t_fromb64() converts from base64 to binary. It
does not validate that the size of the destination is sufficiently large -
that is up to the callers. In some places there was such a check, but not
in others.
Add an argument to t_fromb64() to provide the size of the destination
buffer and validate that we don't write too much data. Also add some sanity
checks to the callers where appropriate.
With thanks to Shi Lei for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The DSO API was picky about casing of symbol names on VMS.
There's really no reason to be that picky, it's mostly just annoying.
Therefore, we take away the possibility to flag for a choice, and will
instead first try to find a symbol with exact case, and failing that,
we try to find it in upper case.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Certain functions are automatically called during auto-deinit in order
to deallocate resources. However, if we have never entered a function which
marks lib crypto as inited then they never get called. This can happen if
the user only ever makes use of a small sub-set of functions that don't hit
the auto-init code.
This commit ensures all such resources deallocated by these functions also
init libcrypto when they are initially allocated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Laurie <ben@openssl.org>
Some hardware devices don't provide the public EC_POINT data. The only
way for X509_check_private_key() to validate that the key matches a
given certificate is to actually perform a sign operation and then
verify it using the public key in the certificate.
Maybe that can come later, as discussed in issue 1532. But for now let's
at least make it fail gracefully and not crash.
GH: 1532
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1547)
(cherry picked from commit 92ed7fa575)
Never output -0; make "negative zero" an impossibility.
Do better checking on BN_rand top/bottom requirements and #bits.
Update doc.
Ignoring trailing garbage in BN_asc2bn.
Port this commit from boringSSL: https://boringssl.googlesource.com/boringssl/+/899b9b19a4cd3fe526aaf5047ab9234cdca19f7d%5E!/
Ensure |BN_div| never gives negative zero in the no_branch code.
Have |bn_correct_top| fix |bn->neg| if the input is zero so that we
don't have negative zeros lying around.
Thanks to Brian Smith for noticing.
Reviewed-by: Richard Levitte <levitte@openssl.org>
MIPS[32|64]R6 is binary and source incompatible with previous MIPS ISA
specifications. Fortunately it's still possible to resolve differences
in source code with standard pre-processor and switching to trap-free
version of addition and subtraction instructions.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The definition of STITCHED_CALL relies on OPENSSL_NO_ASM. However,
when a configuration simply lacks the assembler implementation for RC4
(which is where we have implemented the stitched call), OPENSSL_NO_ASM
isn't implemented. Better, then, to rely on specific macros that
indicated that RC4 (and MD5) are implemented in assembler.
For this to work properly, we must also make sure Configure adds the
definition of RC4_ASM among the C flags.
Reviewed-by: Andy Polyakov <appro@openssl.org>
User can make Windows openssl.exe to treat command-line arguments
and console input as UTF-8 By setting OPENSSL_WIN32_UTF8 environment
variable (to any value). This is likely to be required for data
interchangeability with other OSes and PKCS#12 containers generated
with Windows CryptoAPI.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For increments, the relaxed model is fine. For decrements, it's
recommended to use the acquire release model. We therefore go for the
latter.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Addition was not preserving inputs' property of being fully reduced.
Thanks to Brian Smith for reporting this.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Addition was not preserving inputs' property of being fully reduced.
Thanks to Brian Smith for reporting this.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The declaration of bio_type_lock is independent of no-sock so should not be
inside OPENSSL_NO_SOCK guards.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The bound on log(2)/3 on the second line is incorrect and has an extra
zero compared to the divisions in the third line. log(2)/3 = 0.10034...
which is bounded by 0.101 and not 0.1001. The divisions actually
correspond to 0.101 which is fine. The third line also dropped a factor
of three.
The actual code appears to be fine. Just the comments are wrong.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
They may return if an SCT_signature struct is added in the future that
allows them to be refactored to conform to the i2d/d2i function signature
conventions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Previously, if ct_v1_log_id_from_pkey failed, public_key would be freed by
CTLOG_free at the end of the function, and then again by the caller (who
would assume ownership was not transferred when CTLOG_new returned NULL).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
SCT_verify is impossible to call through the public API (SCT_CTX_new() is
not part of the public API), so rename it to SCT_CTX_verify and move it
out of the public API.
SCT_verify_v1 is redundant, since SCT_validate does the same verification
(by calling SCT_verify) and more. The API is less confusing with a single
verification function (SCT_validate).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Also, re-organize RSA check to use goto err.
Add a test case.
Try all checks, not just stopping at first (via Richard Levitte)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The variable 'buffer', allocated by EC_POINT_point2buf(), isn't
free'd on the success path.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Original strategy for page-walking was adjust stack pointer and then
touch pages in order. This kind of asks for double-fault, because
if touch fails, then signal will be delivered to frame above adjusted
stack pointer. But touching pages prior adjusting stack pointer would
upset valgrind. As compromise let's adjust stack pointer in pages,
touching top of the stack. This still asks for double-fault, but at
least prevents corruption of neighbour stack if allocation is to
overstep the guard page.
Also omit predict-non-taken hints as they reportedly trigger illegal
instructions in some VM setups.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix an off by one error in the overflow check added by 07bed46f33
("Check for errors in BN_bn2dec()").
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Originally PKCS#12 subroutines treated password strings as ASCII.
It worked as long as they were pure ASCII, but if there were some
none-ASCII characters result was non-interoperable. But fixing it
poses problem accessing data protected with broken password. In
order to make asscess to old data possible add retry with old-style
password.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add mutable versions of X509_get0_notBefore and X509_get0_notAfter.
Rename X509_SIG_get0_mutable to X509_SIG_getm.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Since dasync isn't installed, and is only ever used as a dynamic
engine, there's no reason to consider it for initialization when
building static engines.
Reviewed-by: Ben Laurie <ben@openssl.org>
Constify X509_SIG_get0() and order arguments to mactch new standard.
Add X509_SIG_get0_mutable() to support modification or initialisation
of an X509_SIG structure.
Reviewed-by: Matt Caswell <matt@openssl.org>
The generated asm code from x86cpuid.pl contains CMOVE instructions
which are only available on i686 and later CPUs.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1459)
Deprecate the function ASN1_STRING_data() and replace with a new function
ASN1_STRING_get0_data() which returns a constant pointer. Update library
to use new function.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Apply a limit to the maximum blob length which can be read in do_d2i_bio()
to avoid excessive allocation.
Thanks to Shi Lei for reporting this.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If an oversize BIGNUM is presented to BN_bn2dec() it can cause
BN_div_word() to fail and not reduce the value of 't' resulting
in OOB writes to the bn_data buffer and eventually crashing.
Fix by checking return value of BN_div_word() and checking writes
don't overflow buffer.
Thanks to Shi Lei for reporting this bug.
CVE-2016-2182
Reviewed-by: Tim Hudson <tjh@openssl.org>
They may fail if they cannot increment the reference count of the
certificate they are storing a pointer for. They should return 0 if this
occurs.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1408)
Add encoded point ctrl support for other curves: this makes it possible
to handle X25519 and other EC curve point encoding in a similar way
for TLS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
