There are some ciphersuites that were introduced in TLSv1.0/TLSv1.1 but
are backwards compatible with SSLv3.
Fixes#8655
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8658)
(cherry picked from commit 69539990a8)
This prevents failure of openssl s_server socket binding to wildcard
address on hosts with disabled IPv6.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8550)
(cherry picked from commit b8472b4e67)
I turns out that this made crypto/rand/rand_win.c to never build with
BCrypt support unless the user sets _WIN32_WINNT. That wasn't the
intent.
This reverts commit cc8926ec8f.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8641)
(cherry picked from commit 705a27f7e0)
"warning: iv not use by this cipher" -> "warning: iv not used by this cipher"
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8608)
(cherry picked from commit 9c119bc6b5)
Revert win32_pathbyaddr() which is used in DSO_dsobyaddr().
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8596)
(cherry picked from commit 9c98aa354d)
Replace it with InitializeCriticalSection()
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8596)
(cherry picked from commit 09305a7d0a)
DH_check is used to test the validity of Diffie-Hellman parameter sets (p, q, g). Among the tests performed are primality tests on p and q, for this BN_is_prime_ex is called with the rounds of Miller-Rabin set as default. This will therefore use the average case error estimates derived from the function BN_prime_checks_for_size based on the bit size of the number tested.
However, these bounds are only accurate on testing random input. Within this testing scenario, where we are checking the validity of a DH parameter set, we can not assert that these parameters are randomly generated. Thus we must treat them as if they are adversarial in nature and increase the rounds of Miller-Rabin performed.
Generally, each round of Miller-Rabin can declare a composite number prime with probability at most (1/4), thus 64 rounds is sufficient in thwarting known generation techniques (even in safe prime settings - see https://eprint.iacr.org/2019/032 for full analysis). The choice of 64 rounds is also consistent with SRP_NUMBER_ITERATIONS_FOR_PRIME 64 as used in srp_Verify_N_and_g in openssl/apps/s_client.c.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8593)
(cherry picked from commit 2500c093aa)
We treat that as automatic success. Other EVP_*Update functions already do
this (e.g. EVP_EncryptUpdate, EVP_DecryptUpdate etc). EVP_EncodeUpdate is
a bit of an anomoly. That treats 0 byte input length as an error.
Fixes#8576
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8587)
(cherry picked from commit a8274ea351)
not specifying the digest both on command line and in the config file
will lead to response generation aborting with
140617514493760:error:2F098088:time stamp routines:ts_CONF_lookup_fail: \
cannot find config variable:crypto/ts/ts_conf.c:106:tsr_test::signer_digest
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8421)
(cherry picked from commit 29716a03e8)
constant time with a memory access pattern that does not depend
on secret information.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8543)
(cherry picked from commit 9c0cf214e7)
So far, it only handled hash-and-algorithm pairs from TLS1.2,
now it also handles 'schemes' defined in TLS1.3 like 0x0807=ed25519 or
0x0809=rsa_pss_pss_sha256
Now it prints information in one of these formats:
... Algorithm scheme=ecdsa_secp256r1_sha256, security bits=128 ... TLS1.3
... Algorithm digest=SHA384, algorithm=DSA, security bits=192 ... TLS1.2
... Algorithm scheme=unknown(0x0e01), security bits=128 ... unhandled case
To implement this added three new lookup-tables: signature_tls13_scheme_list,
signature_tls12_alg_list, signature_tls12_hash_list.
Also minor changes in 'security_callback_debug', eg adding variable 'show_nm'
to indicate if we should show 'nm'.
Also coding-styles fixes from matcaswell
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8445)
(cherry picked from commit 861e45624f)
Great effort has been made to make initialization more configurable.
However, the behavior of OPENSSL_config() was lost in the process,
having it suddenly generate errors it didn't previously, which is not
how it's documented to behave.
A simple setting of default flags fixes this problem.
Fixes#8528
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8533)
(cherry picked from commit 905c9a72a7)
DSA can accept other digests other than SHA1. EC ignores the digest option
altogether.
Fixes#8425
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8432)
(cherry picked from commit 6a6d9ecd1d)
The ecdh_c array is allocated of the same size as ecdh_choices,
whose size depends on whether the support for binary curves is enabled
or not. (The same goes for ecdsa_c).
On systems without SIGALRM, ecdh_c is indexed by predefined constants
intended for representing the index of the ciphers in the ecdh_choices
array.
However, in case of NO_EC2M some of the #defined constants won't match
and would actually access the ecdh_c out-of-bounds.
Use enum instead of a macro to define the curve indexes so they're
within the bounds of the ecdh_c array.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8422)
(cherry picked from commit f5c9916742)
openssl speed doesn't take into account that the library could be
compiled without the support for the binary curves and happily uses
them, which results in EC_GROUP_new_by_curve_name() errors.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8422)
(cherry picked from commit d61f489b5a)
The indentation in the Configure file is currently very strange when
viewed in an editor with a tab width of four spaces, because it has
mixed tab-and-whitespace indentation, which was apparently done with
a tab width of eight spaces.
This commit converts all tabs to spaces using expand(1) with default
settings. To verify that there are only whitespace changes, use
git show --ignore-space-change <this commit>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8512)
There are some compiling errors for mips32r6 and mips64r6:
crypto/bn/bn-mips.S:56: Error: opcode not supported on this processor: mips2 (mips2) `mulu $1,$12,$7'
crypto/mips_arch.h: Assembler messages:
crypto/mips_arch.h:15: Error: junk at end of line, first unrecognized character is `&'
Signed-off-by: Hua Zhang <hua.zhang1974@hotmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8464)
(cherry picked from commit 1b9c5f2e2f)
The secret point R can be recovered from S using the equation R = S - P.
The X and Z coordinates should be sufficient for that.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8504)
(cherry picked from commit 8a74bb5c7b)
There are two copy-paste errors in handling CTR mode. When dealing
with a 2 or 3 block tail, the code branches to the CBC decryption exit
path, rather than to the CTR exit path.
This can lead to data corruption: in the Linux kernel we have a copy
of this file, and the bug leads to corruption of the IV, which leads
to data corruption when we call the encryption function again later to
encrypt subsequent blocks.
Originally reported to the Linux kernel by Ondrej Mosnáček <omosnacek@gmail.com>
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8510)
(cherry picked from commit f643deac41)
Also make various changes to bring the file into line with current coding
style.
Fixes#8456
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/8457)
(cherry picked from commit 81cd023f1d)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8447)
(cherry picked from commit 3dcbb6c4a3)
The previous commit fixed an underflow that may occur in ecp_nistp521.c.
This commit adds a test for that condition. It is heavily based on an
original test harness by Billy Brumley.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8405)
(cherry picked from commit 6855b496b2)
