crypto/asn1/a_strex.c: Type of width variable in asn1_valid_host
function needs to be changed from char to signed char to avoid
build error due to '-Werror=type-limits'.
Signed-off-by: Patrick Steuer <psteuer@mail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
CLA: trivial
OpenSSL 1.1.0 will negotiate EtM on DTLS but will then not actually *do* it.
If we use DTLSv1.2 that will hopefully be harmless since we'll tend to use
an AEAD ciphersuite anyway. But if we're using DTLSv1, then we certainly
will end up using CBC, so EtM is relevant — and we fail to interoperate with
anything that implements EtM correctly.
Fixing it in HEAD and 1.1.0c will mean that 1.1.0[ab] are incompatible with
1.1.0c+... for the limited case of non-AEAD ciphers, where they're *already*
incompatible with other implementations due to this bug anyway. That seems
reasonable enough, so let's do it. The only alternative is just to turn it
off for ever... which *still* leaves 1.0.0[ab] failing to communicate with
non-OpenSSL implementations anyway.
Tested against itself as well as against GnuTLS both with and without EtM.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Don't rely on embedded flag to free strings correctly: it wont be
set if there is a malloc failure during initialisation.
Thanks to Guido Vranken for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1725)
In 1.1.0 we only allowed a strictly increasing version number in the *.num
files, i.e. you could never introduce a symbol at the end of the *.num file
with a lower version number than the one preceding it. This made sense for
1.1.0. However in master we may be introducing symbols for backport to
1.1.0. Therefore it is ok in master to have a symbol for version 1.1.0c
coming after a symbol for version 1.1.1.
This commit fixes the check in mkdef.pl to be a bit looser to allow this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
These are implemented as macros delegating to `EVP_DigestUpdate`, which
takes a `size_t` as its third argument, not an `unsigned int`.
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
If len == 0 in a call to ERR_error_string_n() then we can read beyond the
end of the buffer. Really applications should not be calling this function
with len == 0, but we shouldn't be letting it through either!
Thanks to Agostino Sarubbo for reporting this issue. Agostino's blog on
this issue is available here:
https://blogs.gentoo.org/ago/2016/10/14/openssl-libcrypto-stack-based-buffer-overflow-in-err_error_string_n-err-c/
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1694)
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1694)
I think the second "VC-WIN32" should be "VC-WIN64".
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
CLA: trivial
The number is taken from the OPENSSL_VERSION_NUMBER which is already
in the hex form.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1706)
Looking for something starting with '-Wl,-rpath,' isn't good enough,
as someone might give something like '-Wl,--enable-new-dtags,-rpath,/PATH'.
Looking for ',-rpath,' should be safe enough.
We could remove the preloading stuff entirely, but just in case the
user has chosen to given RPATH setting arguments at configuration,
we'd better make sure testing will still work. Fair warning, there
are some configuration options that do not work with preloaded OpenSSL
libraries, such as the sanity checking ones.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make Configure recognise -rpath and -R to support user added rpaths
for OSF1 and Solaris. For convenience, add a variable LIBRPATH in the
Unix Makefile, which the users can use as follows:
./config [options] -Wl,-rpath,\$(LIBRPATH)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Before OpenSSL 1.1.0, binaries were installed in a non-standard
location by default, and runpath directories were therefore added in
those binaries, to make sure the executables would be able to find the
shared libraries they were linked with.
With OpenSSL 1.1.0 and on, binaries are installed in standard
directories by default, and the addition of runpath directories is
therefore not needed any more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Note that it relies on a trick from Configure, where file names for
object files made from C++ source get '.cc' replaced with '_cc.o' to
recognise them. This is needed so the correct compiler is used when
linking binaries.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A note: this will form object file names by changing '.cc' to
'_cc.o'. This will permit other configuration code to recognise these
object files were built for C++ rather than C.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The original X509_NAME decode free code was buggy: this
could result in double free or leaks if a malloc failure
occurred.
Simplify and fix the logic.
Thanks to Guido Vranken for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1691)
- make 'pip install --user cpp-coveralls' conditional;
- limit no-stdio to single build per operating environment;
- omit enable-asan duplicate;
Reviewed-by: Richard Levitte <levitte@openssl.org>
Align at 5 characters, not 4. There are 5-digit numbers in the output.
Also avoid emitting an extra blank line and trailing whitespace.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got
them after the reformat. This is the result of:
find . -name '*.pl' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.c' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.h' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
Then bn_prime.h was excluded since this is a generated file.
Note mkerr.pl has some changes in a heredoc for some help output, but
other lines there lack trailing whitespace too.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
We now set the handshake header, and close the packet directly in the
write_state_machine. This is now possible because it is common for all
messages.
Reviewed-by: Rich Salz <rsalz@openssl.org>
tls_construct_finished() used to have different arguments to all of the
other construction functions. It doesn't anymore, so there is no neeed to
treat it as a special case.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Ensure all message types work the same way including CCS so that the state
machine doesn't need to know about special cases. Put all the special logic
into ssl_set_handshake_header() and ssl_close_construct_packet().
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead of initialising, finishing and cleaning up the WPACKET in every
message construction function, we should do it once in
write_state_machine().
Reviewed-by: Rich Salz <rsalz@openssl.org>
ssl_set_handshake_header2() was only ever a temporary name while we had
to have ssl_set_handshake_header() for code that hadn't been converted to
WPACKET yet. No code remains that needed that so we can rename it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove the old ssl_set_handshake_header() implementations. Later we will
rename ssl_set_handshake_header2() to ssl_set_handshake_header().
Reviewed-by: Rich Salz <rsalz@openssl.org>
