These variants of BN_CTX_new() and BN_CTX_secure_new() enable passing
an OPENSSL_CTX so that we can access this where needed throughout the
BIGNUM sub library.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9130)
Use the defines OPENSSL_NO_INTTYPES_H & OPENSSL_NO_STDINT_H to determine
if the headers are unavailable for a platform.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8986)
The existing code used PKCS5 specifications.
SP800-132 adds the following additional constraints for:
- the range of the key length.
- the minimum iteration count (1000 recommended).
- salt length (at least 128 bits).
These additional constraints may cause errors (in scrypt, and
some PKCS5 related test vectors). To disable the new
constraints use the new ctrl string "pkcs5".
For backwards compatability, the checks are only enabled by
default for fips mode.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8868)
This is still required currently by engines and digestsign/digestverify.
This PR contains merged in code from Richard Levitte's PR #9126.
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9103)
Making the default cipher strings a function gives the library more
control over the defaults. Potentially allowing a change in the
future as ciphers become deprecated or dangerous.
Also allows third party distributors to change the defaults for their
installations.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8686)
Because the operation identity wasn't integrated with the created
methods, the following code would give unexpected results:
EVP_MD *md = EVP_MD_fetch(NULL, "MD5", NULL);
EVP_CIPHER *cipher = EVP_CIPHER_fetch(NULL, "MD5", NULL);
if (md != NULL)
printf("MD5 is a digest\n");
if (cipher != NULL)
printf("MD5 is a cipher\n");
The message is that MD5 is both a digest and a cipher.
Partially fixes#9106
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9109)
It was previously rand_lib but it makes more sense in drbg_lib.c since
all the functions that use this lock are only ever called from drbg_lib.c
We add some FIPS_MODE defines in preparation for later moving this code
into the FIPS module.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9039)
This is in preparation for moving this code inside the FIPS module.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9039)
In preparation for moving the RAND code into the FIPS module we make
drbg_lib.c OPENSSL_CTX aware.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9039)
Move digest code into the relevant providers (fips, default, legacy).
The headers are temporarily moved to be internal, and will be moved
into providers after all external references are resolved. The deprecated
digest code can not be removed until EVP_PKEY (signing) is supported by
providers. EVP_MD data can also not yet be cleaned up for the same reasons.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8763)
Add missing parentheses in macro
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9044)
Fixes#8923
Found using the openssl cms -resign option.
This uses an alternate path to do the signing which was not adding the required signed attribute
content type. The content type attribute should always exist since it is required is there are
any signed attributes.
As the signing time attribute is always added in code, the content type attribute is also required.
The CMS_si_check_attributes() method adds validity checks for signed and unsigned attributes
e.g. The message digest attribute is a signed attribute that must exist if any signed attributes
exist, it cannot be an unsigned attribute and there must only be one instance containing a single
value.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8944)
Some OSSL_PROVIDER getters took a non-const OSSL_PROVIDER parameter.
There's no reason to do so.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9054)
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712)
CMP and CRMF API is added to libcrypto, and the "cmp" app to the openssl CLI.
Adds extensive man pages and tests. Integration into build scripts.
Incremental pull request based on OpenSSL commit 1362190b1b of 2018-09-26
3rd chunk: CMP ASN.1 structures (in crypto/cmp/cmp_asn.c) and related files
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8669)
Convert EVP_PKEY Parameters to/from binary.
This wraps the low level i2d/d2i calls for DH,DSA and EC key parameters
in a similar way to Public and Private Keys.
The API's can be used by applications (including openssl apps) that only
want to use EVP_PKEY without needing to access low level key API's.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8903)
This function only returns a status and does not modify the parameter.
Since similar function are already taking const parameters, also
change this function to have a const parameter.
Fixes#8934
CLA: trivial
Signed-off-by: Arne Schwabe <arne@rfc2549.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8945)
In the development of the CRMF sub-system, there seems to have been
some confusion as to what configuration option should be used.
'no-crmf' was added, but the C macro guards were using OPENSSL_NO_CMP
rather than OPENSSL_NO_CRMF...
In fact, we want 'no-cmp', but since the CRMF code is part of CMP, we
need 'no-crmf' to depend on 'no-cmp'. We do this by making 'crmf' a
silent "option" that get affected by 'cmp' by way of %disable_cascades.
This allows options to be "aliases" for a set of other ones, silent or
not.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8897)
X963 KDF is used for CMS ec keyagree Recipient Info.
The X963 KDF that is used by CMS EC Key Agreement has been moved
into a EVP_KDF object. This KDF is almost identical to the the SSKDF
hash variant, so it has been implemented inside the SSKDF code with
its own method table.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8902)
We didn't deal very well with names that didn't have pre-defined NIDs,
as the NID zero travelled through the full process and resulted in an
inaccessible method. By consequence, we need to refactor the method
construction callbacks to rely more on algorithm names.
We must, however, still store the legacy NID with the method, for the
sake of other code that depend on it (for example, CMS).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8878)
OBJ_bsearch_ and OBJ_bsearch_ex_ are generic functions that don't
really belong with the OBJ API, but should rather be generic utility
functions. The ending underscore indicates that they are considered
internal, even though they are declared publicly.
Since crypto/stack/stack.c uses OBJ_bsearch_ex_, the stack API ends up
depending on the OBJ API, which is unnecessary, and carries along
other dependencies.
Therefor, a generic internal function is created, ossl_bsearch().
This removes the unecessary dependencies.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8899)
This commit adds the SSL_sendfile call, which allows KTLS sockets to
transmit file using zero-copy semantics.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8727)
This commit introduces support for Linux KTLS sendfile.
Sendfile semantics require the use of a kernel TLS socket to construct the TLS
record headers, encrypt and authenticate the data.
KTLS sendfile improves performance by avoiding the copy of file data into user
space, which is required today.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8727)
Various core and property related code files used global data. We should
store all of that in an OPENSSL_CTX instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8857)
Introduce a macro that allows all structure alignment tricks to be rolled up
into a single place.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8845)
OSSL_provider_init() gets another output parameter, holding a pointer
to a provider side context. It's entirely up to the provider to
define the context and what it's being used for. This pointer is
passed back to other provider functions, typically the provider global
get_params and set_params functions, and also the diverse algorithm
context creators, and of course, the teardown function.
With this, a provider can be instantiated more than once, or be
re-loaded as the case may be, while maintaining instance state.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8848)
The OP_cipher_final function takes a return output size and an output
buffer size argument. The oneshot OP_cipher_cipher function should do
the same.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8849)
If we were using a different type of BIO than a socket BIO then
BIO_get_ktls_send() and BIO_get_ktls_recv() could return the wrong
result.
The above occurred even if KTLS was disabled at compile time - so we should
additionally ensure that those macros do nothing if KTLS is disabled.
Finally we make the logic in ssl3_get_record() a little more robust when
KTLS has been disabled.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8793)
If the kernel headers are sufficiently recent to have KTLS transmit
support, but not recent enough to have KTLS receive support then a
compilation error would be the result.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8793)
OpenSSL_version(OPENSSL_DIR) gives you a nicely formatted string for
display, but if all you really want is the directory itself, you were
forced to parsed the string.
This introduces a new function to get diverse configuration data from
the library, OPENSSL_info(). This works the same way as
OpenSSL_version(), but has its own series of types, currently
including:
OPENSSL_INFO_CONFIG_DIR returns OPENSSLDIR
OPENSSL_INFO_ENGINES_DIR returns ENGINESDIR
OPENSSL_INFO_MODULES_DIR returns MODULESDIR
OPENSSL_INFO_DSO_EXTENSION returns DSO_EXTENSION
OPENSSL_INFO_DIR_FILENAME_SEPARATOR returns directory/filename separator
OPENSSL_INFO_LIST_SEPARATOR returns list separator
For scripting purposes, this also adds the command 'openssl info'.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8709)
This adds the flag OPENSSL_MODULES_DIR for OpenSSL_version(), and the
flag '-m' for 'openssl version'.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8709)
This allows the provider digest_final operation to check that it
doesn't over-run the output buffer.
The EVP_DigestFinal_ex function doesn't take that same parameter, so
it will have to assume that the user provided a properly sized buffer,
but this leaves better room for future enhancements of the public API.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8747)
These undocumented functions were never integrated into the EVP layer
and implement the AES Infinite Garble Extension (IGE) mode and AES
Bi-directional IGE mode. These modes were never formally standardised
and usage of these functions is believed to be very small. In particular
AES_bi_ige_encrypt() has a known bug. It accepts 2 AES keys, but only
one is ever used. The security implications are believed to be minimal,
but this issue was never fixed for backwards compatibility reasons.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8710)
This commit makes the X509_set_sm2_id to 'set0' behaviour, which means
the memory management is passed to X509 and user doesn't need to free
the sm2_id parameter later. API name also changes to X509_set0_sm2_id.
Document and test case are also updated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8626)
When the purpose is to pass parameters to a setter function, that
setter function needs to know the size of the data passed. This
remains true for the pointer data types as well.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8703)
When we attempt to fetch a method with a given NID we will ask the
providers for it if we don't already know about it. During that process
we may be told about other methods with a different NID. We need to
make sure we don't confuse the two.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8541)
OSSL_PARAM_END is a macro that can only be used to initialize an
OSSL_PARAM array, not to assign an array element later on. For
completion, we add an end constructor to facilitate that kind of
assignment.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8704)
C++ style comments are not allowed in ISO C90
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8693)
EVP_MD_fetch() can be given a property query string. However, there
are cases when it won't, for example in implicit fetches. Therefore,
we also need a way to set a global property query string to be used in
all subsequent fetches. This also applies to all future algorithm
fetching functions.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8681)
Additionally, merge ENGINE_CONF into CONF.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8680)
Other configuration modules may have use for tracing, and having one
tracing category for each of them is a bit much. Instead, we make one
category for them all.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8680)
The three macros EVP_F_AESNI_XTS_INIT_KEY, EVP_F_AES_T4_XTS_INIT_KEY
and EVP_F_AES_XTS_INIT_KEY are affected.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8682)
than the update call. The means an earlier error return at the cost of some
duplicated code.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8625)
This configuration module supports a configuration structure pretty
much like the engine configuration module, i.e. something like this:
openssl_conf = openssl_init
[openssl_init]
providers = provider_section
[provider_section]
# Configure the provider named "foo"
foo = foo_section
# Configure the provider named "bar"
bar = bar_section
[foo_section]
# Override name given in the provider section
identity = myfoo
# The exact path of the module. This is platform specific
module_path = /opt/openssl/modules/foo.so
# Whether it should be automatically activated. Value is unimportant
activate = whatever
# Anything else goes as well, and becomes parameters that the
# provider can get
what = 1
# sub-sections will be followed as well
ever = ever_section
[ever_section]
cookie = monster
All the configurations in a provider section and its sub-sections
become parameters for the provider to get, i.e. the "foo" provider
will be able to get values for the following keys (with associated
values shown):
identity => myfoo
module_path => /opt/openssl/modules/foo.so
activate => whatever
what => 1
ever.cookie => monster
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8549)
Provider parameters are parameters set by the core that the provider
can retrieve. The primary use it to support making OpenSSL
configuration data available to the provider.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8549)
Limit the number of AES blocks in a data unit to 2^20 or less.
This corresponds to the mandates in IEEE Std 1619-2018 and NIST SP 800-38E.
Note: that this is a change from IEEE Std 1619-2007 which only recommended
this limit.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8627)
This patch adds support for the Linux TLS Rx socket option.
It completes the previous patch for TLS Tx offload.
If the socket option is successful, then the receive data-path of the TCP
socket is implemented by the kernel.
We choose to set this option at the earliest - just after CCS is complete.
Change-Id: I59741e04d89dddca7fb138e88fffcc1259b30132
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
Add support for Linux TLS Rx offload in the BIO layer.
Change-Id: I79924b25dd290a873d69f6c8d429e1f5bb2c3365
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
Introduce the infrastructure for supproting receive side Linux Kernel TLS
data-path.
Change-Id: I71864d8f9d74a701cc8b0ad5536005f3c1716c1c
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
'no-dso' is meaningless, as it doesn't get any macro defined.
Therefore, we remove all checks of OPENSSL_NO_DSO. However, there may
be some odd platforms with no DSO scheme. For those, we generate the
internal macro DSO_NONE aand use it.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/#8622)
It seems more intuitive to set `OPENSSL_TRACE=all` instead of
`OPENSSL_TRACE=any` to obtain trace output for all categories.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
Previously, if the openssl application was run with OPENSSL_TRACE=any,
all trace output would just show 'ANY' as the category name, which was
not very useful. To get the correct category name printed in the trace
output, the openssl application now registers separate channels for
each category.
The trace API is unchanged, it is still possible for an application to
register a single channel for the 'ANY' category to see all outputt,
if it does not need this level of detail.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
The naming of generated assembler wasn't done quite right. There are
assembler files that are generated from a perl script, and there are
those who are not. Only the former must be renamed to the platform
specific asm extension.
Furthermore, we need to make sure that 'OSSL_provider_init' isn't case
sensitive on VMS, to allow for the least surprise for provider
builders.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8529)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8527)
OpenSSL will come with a set of well known providers, some of which
need to be accessible from the start. These are typically built in
providers, or providers that will work as fallbacks.
We do this when creating a new provider store, which means that this
will happen in every library context, regardless of if it's the global
default one, or an explicitely created one.
We keep the data about the known providers we want to make accessible
this way in crypto/provider_predefined.h, which may become generated.
For now, though, we make it simple and edited manually.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8480)
To ensure that old applications aren't left without any provider, and
at the same time not forcing any default provider on applications that
know how to deal with them, we device the concept of fallback
providers, which are automatically activated if no other provider is
already activated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8480)
They're only used in one place, and only for a legacy datatype.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8302)
All relevant OSSL_METHOD_CONSTRUCT_METHOD callbacks got the callback
data passed to them, except 'destruct'. There's no reason why it
shouldn't get that pointer passed, so we make a small adjustment.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8341)
The openssl app registers trace callbacks which automatically
set a line prefix in the OSSL_TRACE_CTRL_BEGIN callback.
This prefix needs to be cleared in the OSSL_TRACE_CTRL_END
callback, otherwise a memory leak is reported when openssl
is built with crypto-mdebug enabled.
This leak causes the tests to fail when tracing and memory
debugging are enabled.
The leak can be observed by any command that produces trace
output, e.g. by
OPENSSL_TRACE=ANY util/shlib_wrap.sh apps/openssl version
...
[00:19:14] 4061 file=apps/bf_prefix.c, line=152, ...
26 bytes leaked in 1 chunks
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8463)
Configure with -DOPENSSL_DEV_NO_ATOMICS and you get refcount without
atomics. This is intended for internal development only, to check the
refcounting is properly coded. It should never become a configuration
option, hence the name of the macro.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8479)
This queries the provider for its available functionality (unless a
matching method structured is already cached, in which case that's
used instead), and creates method structure with the help of a passed
constructor. The result is cached if the provider allows it (or if
caching is forced).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8340)
Provide a number of functions to allow parameters to be set and
retrieved in a type safe manner. Functions are provided for many
integral types plus double, BIGNUM, UTF8 strings and OCTET strings.
All of the integer functions will widen the parameter data as
required. This permits a degree of malleability in the parameter
definition. For example a type can be changed from a thirty two bit
integer to a sixty four bit one without changing application code.
Only four and eight byte integral sizes are supported here.
A pair of real functions are available for doubles.
A pair of functions is available for BIGNUMs. These accept any sized
unsigned integer input and convert to/from a BIGNUM.
For each OCTET and UTF8 strings, four functions are defined. This
provide get and set functionality for string and for pointers to
strings. The latter avoiding copies but have other inherent risks.
Finally, some utility macros and functions are defined to allow
OSSL_PARAM definition arrays to be specified in a simple manner.
There are two macro and one function for most types. The exception
being BIGNUM, for which there is one macro and one function.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8451)
The OSSL_PARAM attribute names |buffer| and |buffer_size| may lead to
confusion, as they may make some think that the memory pointed at is
an intermediate memory are. This is not generally the case, so we
rename |buffer| and |buffer_size| to |data| and |data_size|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8451)
in INSTALL, Configure, crypto/build.info, include/openssl/crmferr.h,
crypto/err/, include/openssl/err.h, and (to be updated:) util/libcrypto.num
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7646)
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712)
CMP and CRMF API is added to libcrypto, and the "cmp" app to the openssl CLI.
Adds extensive man pages and tests. Integration into build scripts.
Incremental pull request based on OpenSSL commit 1362190b1b of 2018-09-26
1st chunk: CRMF API (include/openssl/crmf.h) and its documentation (reviewed)
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7328)
Adding a provider means creating an internal provier object and adding
it to the store. This allows the addition of built in providers, be it
in the OpenSSL libraries or in any application.
"Loading" a provider is defined broadly. A built in provider is already
"loaded" in essence and only needs activating, while a provider in a
dynamically loadable module requires actually loading the module itself.
In this API, "loading" a provider does both.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8287)
The OSSL_PROVIDER is the core object involved in loading a provider
module, initialize a provider and do the initial communication of
provider wide and core wide dispatch tables.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8287)
This does no harm, and ensures that the inclusion isn't mistakenly
removed in the generated *err.h where it's actually needed.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8397)
This disabled the tracing functionality by making functions do
nothing, and making convenience macros produce dead code.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)
The idea is that the application shall be able to register output
channels or callbacks to print tracing output as it sees fit.
OpenSSL internals, on the other hand, want to print thoses texts using
normal printing routines, such as BIO_printf() or BIO_dump() through
well defined BIOs.
When the application registers callbacks, the tracing functionality
sets up an internal BIO that simply forwards received text to the
appropriate application provided callback.
Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)
SSH's KDF is defined in RFC 4253 in Section 7.2
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7290)
These are a couple of utility functions, to make import and export of
BIGNUMs to byte strings in platform native for (little-endian or
big-endian) easier.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8346)
Properties are a sequence of comma separated name=value pairs. A name
without a corresponding value is assumed to be a Boolean and have the
true value 'yes'. Values are either strings or numbers. Strings can be
quoted either _"_ or _'_ or unquoted (with restrictions). There are no
escape characters inside strings. Number are either decimal digits or
'0x' followed by hexidecimal digits. Numbers are represented internally
as signed sixty four bit values.
Queries on properties are a sequence comma separated conditional tests.
These take the form of name=value (equality test), name!=value (inequality
test) or name (Boolean test for truth). Queries can be parsed, compared
against a definition or merged pairwise.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8224)
This commit adds a dedicated function in `EC_METHOD` to access a modular
field inversion implementation suitable for the specifics of the
implemented curve, featuring SCA countermeasures.
The new pointer is defined as:
`int (*field_inv)(const EC_GROUP*, BIGNUM *r, const BIGNUM *a, BN_CTX*)`
and computes the multiplicative inverse of `a` in the underlying field,
storing the result in `r`.
Three implementations are included, each including specific SCA
countermeasures:
- `ec_GFp_simple_field_inv()`, featuring SCA hardening through
blinding.
- `ec_GFp_mont_field_inv()`, featuring SCA hardening through Fermat's
Little Theorem (FLT) inversion.
- `ec_GF2m_simple_field_inv()`, that uses `BN_GF2m_mod_inv()` which
already features SCA hardening through blinding.
From a security point of view, this also helps addressing a leakage
previously affecting conversions from projective to affine coordinates.
This commit also adds a new error reason code (i.e.,
`EC_R_CANNOT_INVERT`) to improve consistency between the three
implementations as all of them could fail for the same reason but
through different code paths resulting in inconsistent error stack
states.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8254)
The context builds on CRYPTO_EX_DATA, allowing it to be dynamically
extended with new data from the different parts of libcrypto.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8225)
This allows allocation of items at indexes that were created after the
CRYPTO_EX_DATA variable was initialized, using the exact same method
that was used then.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8225)
New function to return internal pointer for field.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8195)
safestack.h, lhash.h and sparse_array.h all define macros to generate
a full API for the containers as static inline functions. This
potentially generates unused code, which some compilers may complain
about.
We therefore need to mark those generated functions as unused, so the
compiler knows that we know, and stops complaining about it.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8246)
Add SSL_OP64_NO_EXTENDED_MASTER_SECRET, that can be set on either
an SSL or an SSL_CTX. When processing a ClientHello, if this flag
is set, do not indicate that the EMS TLS extension was received in
either the ssl3 object or the SSL_SESSION. Retain most of the
sanity checks between the previous and current session during
session resumption, but weaken the check when the current SSL
object is configured to not use EMS.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3910)
Changed PKEY/KDF API to call the new API.
Added wrappers for PKCS5_PBKDF2_HMAC() and EVP_PBE_scrypt() to call the new EVP KDF APIs.
Documentation updated.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6674)
Making this a no-op removes a potential infinite loop than can occur in
some situations.
Fixes#2865
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8167)
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7726)
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7726)
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7726)
Trim trailing whitespace. It doesn't match OpenSSL coding standards,
AFAICT, and it can cause problems with git tooling.
Trailing whitespace remains in test data and external source.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8092)
When computing the end-point shared secret, don't take the
terminating NULL character into account.
Please note that this fix breaks interoperability with older
versions of OpenSSL, which are not fixed.
Fixes#7956
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7957)
instead of duplicity the code.
CLA: trivial
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8127)
EVP_PKEY_CTRL_DSA_PARAMGEN_Q_BITS and EVP_PKEY_CTRL_DSA_PARAMGEN_MD are only
exposed from EVP_PKEY_CTX_ctrl, which means callers must write more error-prone
code (see also issue #1319). Add the missing wrapper macros and document them.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8093)
A CAdES Basic Electronic Signature (CAdES-BES) contains, among other
specifications, a collection of Signing Certificate reference attributes,
stored in the signedData ether as ESS signing-certificate or as
ESS signing-certificate-v2. These are described in detail in Section 5.7.2
of RFC 5126 - CMS Advanced Electronic Signatures (CAdES).
This patch adds support for adding ESS signing-certificate[-v2] attributes
to CMS signedData. Although it implements only a small part of the RFC, it
is sufficient many cases to enable the `openssl cms` app to create signatures
which comply with legal requirements of some European States (e.g Italy).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7893)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Signed-off-by: Ping Yu <ping.yu@intel.com>
Signed-off-by: Steven Linsell <stevenx.linsell@intel.com>
(Merged from https://github.com/openssl/openssl/pull/7573)
Only for SunCC for now.
It turns out that some compilers to generate external variants of
unused static inline functions, and if they use other external
symbols, those need to be present as well. If you then happen to
include one of safestack.h or lhash.h without linking with libcrypto,
the build fails.
Fixes#6912
Signed-off-by: Matthias Kraft <Matthias.Kraft@softwareag.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8087)
