Conform to coding guidelines.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3989)
This was previously mistakenly handled as a single error code.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3989)
Changed HKDF to use EVP_PKEY_CTX_md() (review comment of @snhenson) and
introduced more specific error codes (not only indicating *that* some
parameter is missing, but actually *which* one it is).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3989)
HKDF now handles an invalid digest like TLS1-PRF does (i.e., returns
KDF_R_INVALID_DIGEST if the passed digest is not known). Both KDFs now
set the error code KDF_R_UNKNOWN_PARAMETER_TYPE if a type was passed
that is not recognized. This will have the effect of improving debugging
output in case a user uses "openssl pkeyutl -kdf ..." in a wrong way and
result in an actual error code (instead of just "failure" and an empty
error stack).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3989)
Introduce KDF_F_PKEY_HKDF_DERIVE and return the KDF_R_MISSING_PARAMETER
error code when required parameters have not been set. This will make
"openssl pkeyutl -kdf HKDF" return a meaningful error message instead of
simply "Public Key operation error".
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3989)
This is achieved mostly by ~10% reduction of amount of instructions
per round thanks to a) switch to KECCAK_2X variant; b) merge of
almost 1/2 rotations with logical instructions. Performance is
improved on all observed processors except on Cortex-A15. This is
because it's capable of exploiting more parallelism and can execute
original code for same amount of time.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4057)
Removing the use of SETUP_TEST_FIXTURE reduces complxity in those tests that
used it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4066)
The OID for {1 3 6 1 5 5 8 1 2} HMAC-SHA1 (NID_hmac_sha1) is explicitly
referenced by RFC 2510, RFC 3370, and RFC 4210. This is essential for the
common implementations of CMP (Certificate Managing Protocol, RFC4210).
HMAC-MD5's OID {1 3 6 1 5 5 8 1 1} (NID_hmac_md5) is in the same branch and
it seems to generally exist (-> Internet search), but it is unclear where it is
actually defined as it appears not to be referenced by RFCs and practically
rather unused.
Those OIDs are both duplicates to OIDs from an RSA OID branch, which are already
included in builtin_pbe[]:
HMAC-SHA1 also has another OID defined in PKCS#5/RFC2898 (NID_hmacWithSHA1).
It is also unclear where the other OID for HMAC-MD5 (NID_hmacWithMD5) from the
RSA branch is officially specified, as only HMAC-SHA1 from PKCS#5 was found to be
defined. Anyway, HMAC-MD5 likely only plays a neglectable role in the future.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3811)
Simplify the only test that uses this macro so it doesn't need it anymore.
Clean up the formatting a little.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4034)
"More" refers to the fact that we make active BIT_INTERLEAVE choice
in some specific cases. Update commentary correspondingly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Even though tm->length >= 15 && v[14] == '.' works in practice,
[because "YYYYMMDDHHMMSS." would be rejected as invalid by
asn1_time_to_tm,] formal correctness with respect to buffer
overstep in few lines vicinity improves readability.
[Also fold one if condition and improve expression readability.]
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4058)
Seems this documentation is not dead, so add this missing part
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4037)
Document that the RSA_get0_ functions permit a NULL BIGNUM **. Those output parameters are ignored.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4064)
In TLSv1.3 we can resume, but still get a new session. This adds a test to
make sure that is happening.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4068)
If a new_session_cb is set then it was only ever getting invoked if !s->hit
is true. This is sensible for <=TLSv1.2 but does not work for TLSv1.3.
Fixes#4045
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4068)
This is to address issue #3932. Support comma-separated string
to specify what extensions to be displayed.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4016)
Remove redundant variable
[to be squashed]
The memory blocks contain secret data and must be
cleared before returning to the system heap.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4062)
Some extensions were being displayed twice, before they were parsed, and
again after they were parsed.
The supported_versions extension was not being fully displayed, as it
was processed differently than other extensions.
Move the debug callback to where the extensions are first collected, to
catch all the extensions as they come in, so they are ordered correctly.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3911)
TLS_ST_SR_NEXT_PROTO means "SSLv3/TLS read next proto"
Fix typo in the message for TLS_ST_SW_CERT_STATUS
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4054)
I think it's better to use `GetFileAttributes` to obtain the attributes
of a file than `FindFirstFile`. If the input name contains `*`, this
function should return failure rather than check whether the first match
happens to be a file or a directory.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3991)
To state the fractional seconds part will be lost in the conversion.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4041)
Remove the function prototypes for ssl_cert_get0_next_certificate, ssl_set_default_md, tls1_shared_list,
dtls1_send_newsession_ticket, tls1_ctrl, and tls1_callback_ctrl, all of which are not defined.
It also changed the signature of the function pqueue_next to `pitem *pqueue_next(piterator *item)` in
pqueue.c, making it match the prototype in ssl_locl.h. (`piterator *` is equivalent to `pitem **`.)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4049)
This patch removes the prototype of function RECORD_LAYER_set_write_sequence from record_locl.h, since this function is not defined.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4051)
Add functions to enumerate public key methods. Add test to ensure table
is in the correct order.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4015)
original problem: if a private key is invaild, nothing outputted.
the error filter in apps/rsa.c is not working any more.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4043)
Documentation and test cases are also updated
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3783)
Since this file is modified in PR #3934, so should be cleaned up
incidentially.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4035)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4036)
File::Glob::glob is deprecated, it's use generates this kind of
message:
File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at ../master/Configure line 277.
So instead, use a construction that makes the caller glob() use
File::Glob::bsd_glob().
Note that we're still excluding VMS, as it's directory specs use '['
and ']', which have a different meaning with bsd_glob and would need
some extra quoting. This might change, but later.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4040)
