Properties are a sequence of comma separated name=value pairs. A name
without a corresponding value is assumed to be a Boolean and have the
true value 'yes'. Values are either strings or numbers. Strings can be
quoted either _"_ or _'_ or unquoted (with restrictions). There are no
escape characters inside strings. Number are either decimal digits or
'0x' followed by hexidecimal digits. Numbers are represented internally
as signed sixty four bit values.
Queries on properties are a sequence comma separated conditional tests.
These take the form of name=value (equality test), name!=value (inequality
test) or name (Boolean test for truth). Queries can be parsed, compared
against a definition or merged pairwise.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8224)
The add/double shortcut in ecp_nistz256-x86_64.pl left one instruction
point that did not unwind, and the "slow" path in AES_cbc_encrypt was
not annotated correctly. For the latter, add
.cfi_{remember,restore}_state support to perlasm.
Next, fill in a bunch of functions that are missing no-op .cfi_startproc
and .cfi_endproc blocks. libunwind cannot unwind those stack frames
otherwise.
Finally, work around a bug in libunwind by not encoding rflags. (rflags
isn't a callee-saved register, so there's not much need to annotate it
anyway.)
These were found as part of ABI testing work in BoringSSL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #8109
This commit adds a dedicated function in `EC_METHOD` to access a modular
field inversion implementation suitable for the specifics of the
implemented curve, featuring SCA countermeasures.
The new pointer is defined as:
`int (*field_inv)(const EC_GROUP*, BIGNUM *r, const BIGNUM *a, BN_CTX*)`
and computes the multiplicative inverse of `a` in the underlying field,
storing the result in `r`.
Three implementations are included, each including specific SCA
countermeasures:
- `ec_GFp_simple_field_inv()`, featuring SCA hardening through
blinding.
- `ec_GFp_mont_field_inv()`, featuring SCA hardening through Fermat's
Little Theorem (FLT) inversion.
- `ec_GF2m_simple_field_inv()`, that uses `BN_GF2m_mod_inv()` which
already features SCA hardening through blinding.
From a security point of view, this also helps addressing a leakage
previously affecting conversions from projective to affine coordinates.
This commit also adds a new error reason code (i.e.,
`EC_R_CANNOT_INVERT`) to improve consistency between the three
implementations as all of them could fail for the same reason but
through different code paths resulting in inconsistent error stack
states.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8254)
"Windows friendliness" means a) unified PIC-ification, unified across
all platforms; b) unified commantary delimiter; c) explicit ldur/stur,
as Visual Studio assembler can't automatically encode ldr/str as
ldur/stur when needed.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8256)
"Windows friendliness" means a) flipping .thumb and .text directives,
b) always generate Thumb-2 code when asked(*); c) Windows-specific
references to external OPENSSL_armcap_P.
(*) so far *some* modules were compiled as .code 32 even if Thumb-2
was targeted. It works at hardware level because processor can alternate
between the modes with no overhead. But clang --target=arm-windows's
builtin assembler just refuses to compile .code 32...
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8252)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8257)
The context builds on CRYPTO_EX_DATA, allowing it to be dynamically
extended with new data from the different parts of libcrypto.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8225)
This allows allocation of items at indexes that were created after the
CRYPTO_EX_DATA variable was initialized, using the exact same method
that was used then.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8225)
New function to return internal pointer for field.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8195)
safestack.h, lhash.h and sparse_array.h all define macros to generate
a full API for the containers as static inline functions. This
potentially generates unused code, which some compilers may complain
about.
We therefore need to mark those generated functions as unused, so the
compiler knows that we know, and stops complaining about it.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8246)
Add SSL_OP64_NO_EXTENDED_MASTER_SECRET, that can be set on either
an SSL or an SSL_CTX. When processing a ClientHello, if this flag
is set, do not indicate that the EMS TLS extension was received in
either the ssl3 object or the SSL_SESSION. Retain most of the
sanity checks between the previous and current session during
session resumption, but weaken the check when the current SSL
object is configured to not use EMS.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3910)
Otherwise this can result in an incorrect calculation of the maximum
encoded integer length, meaning an insufficient buffer size is allocated.
Thanks to Billy Brumley for helping to track this down.
Fixes#8209
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8237)
This makes `--strict-warnings` into a compiler pseudo-option, i.e. it
gets treated the same way as any other compiler option given on the
configuration command line, but is retroactively replaced by actual
compiler warning options, depending on what compiler is used.
This makes it easier to see in what order options are given to the
compiler from the configuration command line, i.e. this:
./config -Wall --strict-warnings
would give the compiler flags in the same order as they're given,
i.e.:
-Wall -Werror -Wno-whatever ...
instead of what we got previously:
-Werror -Wno-whatever ... -Wall
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8239)
The "verify_return_error" option in s_client is documented as:
Return verification errors instead of continuing. This will typically
abort the handshake with a fatal error.
In practice this option was ignored unless also accompanied with the
"-verify" option. It's unclear what the original intention was. One fix
could have been to change the documentation to match the actual behaviour.
However it seems unecessarily complex and unexpected that you should need
to have both options. Instead the fix implemented here is make the option
match the documentation so that "-verify" is not also required.
Note that s_server has a similar option where "-verify" (or "-Verify") is
still required. This makes more sense because those options additionally
request a certificate from the client. Without a certificate there is no
possibility of a verification failing, and so "-verify_return_error" doing
nothing seems ok.
Fixes#8079
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8080)
The original 1.1.1 design was to use SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal start/end of a post-handshake message
exchange in TLSv1.3. Unfortunately experience has shown that this confuses
some applications who mistake it for a TLSv1.2 renegotiation. This means
that KeyUpdate messages are not handled properly.
This commit removes the use of SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal the start/end of a post-handshake
message exchange. Individual post-handshake messages are still signalled in
the normal way.
This is a potentially breaking change if there are any applications already
written that expect to see these TLSv1.3 events. However, without it,
KeyUpdate is not currently usable for many applications.
Fixes#8069
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8096)
set_cipher_list() sets TLSv1.2 (and below) ciphers, and its success or
failure should not depend on whether set_ciphersuites() has been used to
setup TLSv1.3 ciphers.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7759)
There are times when one might want to use something like
DEFINE_STACK_OF in a .c file, because it defines a stack for a type
defined in that .c file. Unfortunately, when configuring with
`--strict-warnings`, clang aggressively warn about unused functions in
such cases, which forces the use of such DEFINE macros to header
files.
We therefore disable this warning from the `--strict-warnings`
definition for clang.
(note for the curious: `-Wunused-function` is enabled via `-Wall`)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8234)
Iterators over the sparse array structures have gained an initial argument
which indicates the index into the array of the element. This can be used,
e.g., to delete or modify the associated value.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8229)
Changed PKEY/KDF API to call the new API.
Added wrappers for PKCS5_PBKDF2_HMAC() and EVP_PBE_scrypt() to call the new EVP KDF APIs.
Documentation updated.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6674)
CLA: trivial
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8137)
This got triggered by test/testutil.h including ../apps/opt.h.
Some compilers do all inclusions from the directory of the C file
being compiled, so when a C file includes a header file with a
relative file spec, and that header file also includes another header
file with a relative file spec, the compiler no longer follows.
As a specific example, test/testutil/basic_output.c included
../testutil.h. Fine so far, but then, test/testutil.h includes
../apps/opt.h, and the compiler ends up trying to include (seen from
the source top) test/apps/opt.h rather than apps/opt.h, and fails.
The solution could have been to simply add apps/ as an inclusion
directory. However, that directory also has header files that have
nothing to do with libapps, so we take this a bit further, create
apps/include and move libapps specific headers there, and then add
apps/include as inclusion directory in the build.info files where
needed.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/8210)
cipher_init may be called on an already initialized context, without a
necessary cleanup. This separates cleanup from initialization, closing
an eventual open session before creating a new one.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7859)
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7859)
Engine has been moved from crypto/engine/eng_devcrypto.c to
engines/e_devcrypto.c.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7859)
ARMv8.3 adds pointer authentication extension, which in this case allows
to ensure that, when offloaded to stack, return address is same at return
as at entry to the subroutine. The new instructions are nops on processors
that don't implement the extension, so that the vetification is backward
compatible.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8205)
This commit adds a space and time efficient sparse array data structure.
The structure's raw API is wrapped by inline functions which provide type
safety.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8197)
When reworking the way library file names and extensions were formed,
AIX was lost in the process. This restores the previous
functionality.
Fixes#8156
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8162)
This allows the user to override our defaults if needed, and in a
consistent manner.
Partial fix for #7607
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7624)
This function is designed to use $config{shlib_version} directly
instead of taking an input argument, yet the BASE variant didn't do
this.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8146)
The only thing that makes an ENGINE module special is its entry
points. Other than that, it's a normal dynamically loadable module,
nothing special about it. This change has us stop pretending anything
else.
We retain using ENGINE as a term for installation, because it's
related to a specific installation directory, and we therefore also
mark ENGINE modules specifically as such with an attribute in the
build.info files.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8147)
If the old openssl versions not supporting the .include directive
load a config file with it, they will bail out with error.
This change allows using the .include = <filename> syntax which
is interpreted as variable assignment by the old openssl
config file parser.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8141)
