tls1_get_curvelist() does not read from its third parameter, so
the assignments prior to function call were dead code and can be removed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2952)
Instead of making a positive comparison against the invalid value
that our server would send, make a negative check against the only
value that is not an error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2953)
Just as for DH, DSA and RSA, this gives the engine associated with the
key.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2960)
describe the vagaries in their behaviour.
[skip ci]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2958)
The logic for testing whether the sessionfile has been created or not
was faulty and could result in race conditions. If you "lose" the tests
hang waiting for a session file that's never going to arrive.
Fixes#2950
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2955)
Zero out the length alongside the NULLing of the pointer, to
bring parity between the selected and proposed fields..
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2954)
It turns out that /DSF didn't do any good for our purposes. Instead,
remove the CALL_DEBUG flag from any image we link. This ensures that
we can have debugging information in the image files, but don't
automatically end up in a debugging session upon image activation.
Unfortunately, this means the CALL_DEBUG must be turned on when there
is a need to run with the debugger activated, and to turn it off when
done. This has been documented in NOTES.VMS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2957)
Add python cryptography testing instructions too
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2885)
Import test data from:
ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-1/pkcs-1v2-1-vec.zip
This is a set of RSA-PSS and RSA-OAEP test vectors including some edge cases
with unusual key sizes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2944)
The previous 2 commits fixed some issues in the Boring tests. This
re-enables those tests.
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2942)
After a resumption it is documented that SSL_get_peer_cert_chain() will
return NULL. In BoringSSL it still returns the chain. We don't support that
so we should update the shim to call SSL_get_peer_certificate() instead
when checking whether a peer certificate is available.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2942)
OpenSSL requires that we set the session id context. BoringSSL apparently
does not require this, so wasn't setting it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2942)
No need to break out of the loop and repeat the loop termination
condition when we can just return.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2949)
[.util]shareable_image_wrap.c.in was never useful because lib$spawn()
insisted on combining stdout and stderr into one.
Instead, we introduce two scripts that create and destroy a temporary
environment where the local shareable images become available,
[.util]local_shlib.com and [.util]unlocal_shlib.com. They also define
DBG$IMAGE_DSF_PATH, which is require so the debugger can find the Debug
Symbol Files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2947)
That makes it possible to run images without automagically ending up
in a debug session, while still being able to debug when required.
All .DSF files must reside in the same directory to be useful.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2947)
Using a cert with Cyrillic characters, kindly supplied by Dmitry Belyavsky
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2943)
This gets us a newer Clang, and newer Go.
1.1.0 already runs on Trusty without issues.
To do this, we need to disable afalgeng in the -Werror build.
afalgeng isn't compatible with the -Werror build on
Travis Trusty due to kernel header mismatch.
(See also 97043e46aa)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Found using various (old-ish) versions of gcc.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2940)
On some platforms, setting stdout to binary mode isn't quite enough,
which makes the result unusable. With -out, we have better control.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2939)
The Boring runner attempts to enable the NULL-SHA ciphersuite using the
cipherstring "DEFAULT:NULL-SHA". However in OpenSSL DEFAULT permanently
switches off NULL ciphersuites, so we fix this up to be "ALL:NULL-SHA"
instead. We can't change the runner so we have to change the shim to
detect this.
(Merged from https://github.com/openssl/openssl/pull/2933)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
We already test DTLS protocol versions. For good measure, add some
DTLS tests with client auth to the new test framework, so that we can
remove the old tests without losing coverage.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Update the list of suppressions so that we can run a later BoringSSL set
of tests. This also adds an ErrorMap to greatly reduce the number of
failing tests. The remaining tests that still fail are just disabled for
now.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2930)
The boring tests are currently failing because they send a PSK extension
which isn't in the last place. This is not allowed in the latest TLS1.3
specs. However the Boring tests we have are based on an old commit that
pre-date when that rule first appeared.
The proper solution is to update the tests to a later commit. But for now
to get travis to go green we disable the failing tests.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2928)
and RSA_verify_PKCS1_PSS_mgf1 with 512-bit RSA vs. sha-512.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2801)
As hinted by its name new subroutine processes 4 input blocks in
parallel. It still operates on 256-bit registers and is just
another step toward full-blown AVX512IFMA procedure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Exteneded feature flags were not pulled on AMD processors, as result
a number of extensions were effectively masked on Ryzen. Original fix
for x86_64cpuid.pl addressed this problem, but messed up processor
vendor detection. This fix moves extended feature detection past
basic feature detection where it belongs. 32-bit counterpart is
harmonized too.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
conf has the ability to expand variables in config files. Repeatedly doing
this can lead to an exponential increase in the amount of memory required.
This places a limit on the length of a value that can result from an
expansion.
Credit to OSS-Fuzz for finding this problem.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2894)
Add 2017 copyright year
Add missing typedef to NAME
Remove ec(7) and bn(7) doc links
Remove .pod link errors, bogus links, make a few typo corrections
Fix some typo's in links and some missing items.
Don't link to C runtime functions (See OPENSSL_malloc for example/precedent)
Document ASN1_tag2str(), add a few typedef's that were missing from NAME
Update doc-nits target; addresses
https://github.com/openssl/openssl/pull/1900#issuecomment-259943891,
Merge check-doc-links into find-doc-nits; if run regularly, would have found
https://github.com/openssl/openssl/pull/2825
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2862)
It seems the =item isn't supposed to have pure numbers, or so tells me
perldoc.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2906)
It shouldn't try to return an action description for UIT_PROMPT type
UI strings.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2904)
... in functions dealing with the SSL object rather than the context.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2870)
