SSL(_CTX)?_set_client_CA_list() was a server side only function in 1.1.0.
If it was called on the client side then it was ignored. In 1.1.1 it now
makes sense to have a CA list defined for both client and server (the
client now sends it the the TLSv1.3 certificate_authorities extension).
Unfortunately some applications were using the same SSL_CTX for both
clients and servers and this resulted in some client ClientHellos being
excessively large due to the number of certificate authorities being sent.
This commit seperates out the CA list updated by
SSL(_CTX)?_set_client_CA_list() and the more generic
SSL(_CTX)?_set0_CA_list(). This means that SSL(_CTX)?_set_client_CA_list()
still has no effect on the client side. If both CA lists are set then
SSL(_CTX)?_set_client_CA_list() takes priority.
Fixes#7411
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7503)
If a client sends data to a server and then immediately closes without
waiting to read the NewSessionTickets then the server can receive EPIPE
when trying to write the tickets and never gets the opportunity to read
the data that was sent. Therefore we ignore EPIPE when writing out the
tickets in TLSv1.3
Fixes#6904
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6944)
At certain points in the handshake we could receive either a plaintext or
an encrypted alert from the client. We should tolerate both where
appropriate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6887)
Under certain error conditions a call to SSLfatal could accidently be
missed.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6872)
If we issue new tickets due to post-handshake authentication there is no
reason to remove previous tickets from the cache. The code that did that
only removed the last session anyway - so if more than one ticket got
issued then those other tickets are still valid.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)
During anti-replay we cache the ticket anyway, so there is no point in
using a full stateless ticket.
Fixes#6391
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6563)
Implement support for stateful TLSv1.3 tickets, and use them if
SSL_OP_NO_TICKET is set.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6563)
Separate out as a new function the code to write out data which is specific
to a stateless ticket.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6563)
Sessions should be immutable once they are in the cache because they could
be shared with other threads. If you change them then this can cause
corruptions and races
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6561)
We generate the secrets based on the nonce immediately so there is no
need to keep the nonce.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6415)
All tickets on a connection need to have a unique nonce. When this was
originally implemented we only ever sent one ticket on the conneciton so
this didn't matter. We were just using the value 0. Now we can get multiple
tickets to we need to start doing the ticket nonce properly.
Fixes#6387
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6415)
We send a session ticket automatically in TLSv1.3 at the end of the
handshake. This commit provides the ability to set how many tickets should
be sent. By default this is one.
Fixes#4978
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5227)
Don't call the decrypt ticket callback if we've already encountered a
fatal error. Do call it if we have an empty ticket present.
Change the return code to have 5 distinct returns codes and separate it
from the input status value.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
The return value from the ticket_key callback was not properly handled in
TLSv1.3, so that a ticket was *always* renewed even if the callback
requested that it should not be.
Also the ticket decrypt callback was not being called at all in TLSv1.3.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
The first session ticket sent by the server is actually tacked onto the
end of the first handshake from a state machine perspective. However in
reality this is a post-handshake message, and should be preceeded by a
handshake start event from an info callback perspective.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5874)
We have been unable to trace the contributor of that code to gain their
agreement for the licence change so the code has to be removed.
This commit reverts that contribution. The contribution had no functional
impact so the original way of doing things is still valid. However the
surrounding code has changed significantly so that the exact code as it
was orignally cannot be used. This commit uses the original code as a basis,
but rewrites it to use the PACKET API.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5808)
The alpn_selected value in the session should be NULL before we first
populate it if this is a new session. We assert to make sure it is.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5715)
Place the session ticket AES and HMAC keys into secure memory.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2351)
Since the public and private DRBG are per thread we don't need one
per ssl object anymore. It could also try to get entropy from a DRBG
that's really from an other thread because the SSL object moved to an
other thread.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5547)
We should only update the session cache when we issue a NewSessionTicket.
These are issued automatically after processing a client certificate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5644)
Conceptually in TLSv1.3 there can be multiple sessions associated with a
single connection. Each NewSessionTicket issued can be considered a
separate session. We can end up issuing multiple NewSessionTickets on a
single connection at the moment (e.g. in a post-handshake auth scenario).
Each of those issued tickets should have the new_session_cb called, it
should go into the session cache separately and it should have a unique
id associated with it (so that they can be found individually in the
cache).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5644)
In TLSv1.3 the session is not ready until after the end of the handshake
when we are constructing the NewSessionTicket.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5621)
Adds application data into the encrypted session ticket
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3802)
Add SSL_verify_client_post_handshake() for servers to initiate PHA
Add SSL_force_post_handshake_auth() for clients that don't have certificates
initially configured, but use a certificate callback.
Update SSL_CTX_set_verify()/SSL_set_verify() mode:
* Add SSL_VERIFY_POST_HANDSHAKE to postpone client authentication until after
the initial handshake.
* Update SSL_VERIFY_CLIENT_ONCE now only sends out one CertRequest regardless
of when the certificate authentication takes place; either initial handshake,
re-negotiation, or post-handshake authentication.
Add 'RequestPostHandshake' and 'RequirePostHandshake' SSL_CONF options that
add the SSL_VERIFY_POST_HANDSHAKE to the 'Request' and 'Require' options
Add support to s_client:
* Enabled automatically when cert is configured
* Can be forced enabled via -force_pha
Add support to s_server:
* Use 'c' to invoke PHA in s_server
* Remove some dead code
Update documentation
Update unit tests:
* Illegal use of PHA extension
* TLSv1.3 certificate tests
DTLS and TLS behave ever-so-slightly differently. So, when DTLS1.3 is
implemented, it's PHA support state machine may need to be different.
Add a TODO and a #error
Update handshake context to deal with PHA.
The handshake context for TLSv1.3 post-handshake auth is up through the
ClientFinish message, plus the CertificateRequest message. Subsequent
Certificate, CertificateVerify, and Finish messages are based on this
handshake context (not the Certificate message per se, but it's included
after the hash). KeyUpdate, NewSessionTicket, and prior Certificate
Request messages are not included in post-handshake authentication.
After the ClientFinished message is processed, save off the digest state
for future post-handshake authentication. When post-handshake auth occurs,
copy over the saved handshake context into the "main" handshake digest.
This effectively discards the any KeyUpdate or NewSessionTicket messages
and any prior post-handshake authentication.
This, of course, assumes that the ID-22 did not mean to include any
previous post-handshake authentication into the new handshake transcript.
This is implied by section 4.4.1 that lists messages only up to the
first ClientFinished.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4964)
If a server receives an unexpected ClientHello then we may or may not
accept it. Make sure all such decisions are made in the state machine
and not in the record layer. This also removes a disparity between the
TLS and the DTLS code. The TLS code was making this decision in the
record layer, while the DTLS code was making it later.
Finally it also solves a problem where a warning alert was being sent
during tls_setup_handshake() and the function was returning a failure
return code. This is problematic because it can be called from a
transition function - which we only allow fatal errors to occur in.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5190)
This just adds the various extension functions. More changes will be
required to actually use them.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4435)
We'd like the first bit of early_data and the ClientHello to go in the
same TCP packet if at all possible to enable things like TCP Fast Open.
Also, if you're only going to send one block of early data then you also
don't need to worry about TCP_NODELAY.
Fixes#4783
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4802)
Variables n, d, p are no longer there.
[skip ci]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4894)
Flush following the CCS after an HRR. Only flush the HRR if middlebox
compat is turned off.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4701)
The CCS may be sent at different times based on whether or not we
sent an HRR earlier. In order to make that decision this commit
also updates things to make sure we remember whether an HRR was
used or not.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4701)
The new ServerHello format is essentially now the same as the old TLSv1.2
one, but it must additionally include supported_versions. The version
field is fixed at TLSv1.2, and the version negotiation happens solely via
supported_versions.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4701)
