Ironically enough not all installations get Module::Load::Conditional
installed by default... [It's a bit half-hearted, because such
installations are likely to lack more stuffi that is needed, but
nevertheless, it proved to be helpful.]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4323)
If the server_name extension is long enough to require two bytes to
hold the length of either field, the test suite would not decode
the length properly. Using the PACKET_ APIs would have avoided this,
but it was desired to avoid using private APIs in this part of the
test suite, to keep ourselves honest.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4318)
The include search path was not picking up files in the root of
the tree.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4316)
Move struct timeval includes into e_os.h (where the Windows ones were).
Enaure that the include is guarded canonically.
Refer #4271
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4312)
If there is no SNI in the session then s_client no longer sends the SNI
extension. Update the tests to take account of that
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3926)
cryptilib.h is the second.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
Removed e_os.h from all bar three headers (apps/apps.h crypto/bio/bio_lcl.h and
ssl/ssl_locl.h).
Added e_os.h into the files that need it now.
Directly reference internal/nelem.h when required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
Unlike the NIST DRBG standard, entropy counts are in bits and
buffer lengths are in bytes. This has lead to some confusion and
errors in the past, see my comment on PR 3789.
To clarify the destinction between entropy counts and buffer lengths,
a 'len' suffix has been added to all member names of RAND_DRBG which
represent buffer lengths:
- {min,max}_{entropy,adin,nonce,pers}
+ {min,max}_{entropy,adin,nonce,pers}len
This change makes naming also more consistent, as can be seen in the
diffs, for example:
- else if (adinlen > drbg->max_adin) {
+ else if (adinlen > drbg->max_adinlen) {
Also replaced all 'ent's by 'entropy's, following a suggestion of Paul Dale.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4266)
A condition was removed by commit 1053a6e2281d; presumably it was an
unintended change. Restore the previous behavior so the get_session_cb
won't be called with zero-length session ID.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4236)
range of ctype functions.
Revert "Don't try to compare the ctype functions on values > 127"
This reverts commit 6ac589081b.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4225)
The C standard defines EOF as:
... an integer constant expression, with type int and a negative value...
This means a conforming implemenetation could define this as a one of the
printable characters. This won't be a problem for ASCII.
A specific test case has been added for EOF.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4240)
Remove GETPID_IS_MEANINGLESS and osslargused.
Move socket-related things to new file internal/sockets.h; this is now
only needed by four(!!!) files. Compiles should be a bit faster.
Remove USE_SOCKETS ifdef's
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4209)
Our internal replacement functions return 0 for those values.
However, depending on locale, the C RTL functions may return 1.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4219)
Add -rand_serial to CA command and "serial_rand" config option.
Up RAND_BITS to 159, and comment why: now confirms to CABForum
guidelines (Ballot 164) as well as IETF RFC 5280 (PKIX).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4185)
return true for characters > 127. I.e. they are allowing extended ASCII
characters through which then cause problems. E.g. marking superscript '2' as
a number then causes the common (ch - '0') conversion to number to fail
miserably. Likewise letters with diacritical marks can also cause problems.
If a non-ASCII character set is being used (currently only EBCDIC), it is
adjusted for.
The implementation uses a single table with a bit for each of the defined
classes. These functions accept an int argument and fail for
values out of range or for characters outside of the ASCII set. They will
work for both signed and unsigned character inputs.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4102)
Cast arguments to the various ctype functions to unsigned char to match their
documentation.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4203)
PKEY_CTX setters tests were previously present for HKDF and scrypt; this
patch also adds tests for the third currently supported KDF, TLS1-PRF.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4196)
Force non-empty padding extension.
When enabled, force the padding extension to be at least 1 byte long.
WebSphere application server cannot handle having an empty
extension (e.g. EMS/EtM) as the last extension in a client hello.
This moves the SigAlgs extension last for TLSv1.2 to avoid this
issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3921)
Apart from ssltest_old.c, the test suite relied on e_os.h for the
OSSL_NELEM macro and nothing else.
The ssltest_old.c also requires EXIT and some socket macros.
Create a new header to define the OSSL_NELEM macro and use that instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4186)
Although this piece of code will not be compiled at current stage, but
there seems a plan to re-open the 'no-rsa' option in the future so this
should be fixed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4161)
Instead of having perl modules under test/testlib, util and util/perl,
consolidate them all to be inside util/perl.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4069)
Fix warning and don't use binary field certificate for ECDH CMS
key only test.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4134)
When we are using the internal cache we have to make a copy of the
session before removing it from the parent context's cache, since
we want our copy to still be resumable. However, SSL_CTX_remove_session()
just detaches the session from the SSL_CTX; it does not free the session.
So, we must call SSL_SESSION_free() ourselves before overwriting the
variable that we dup'd from.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4126)
Building without the scrypt KDF is now possible, the OPENSSL_NO_SCRYPT
define is honored in code. Previous this lead to undefined references.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4116)
Added the pkey_meth_kdf_test tests which test the PKEY_METHOD macros (at
the moment, of HKDF and scrypt).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4026)
Add an interface that allows accessing the scrypt KDF as a PKEY_METHOD.
This fixes#4021 (at least for the scrypt portion of the issue).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4026)
reference not by value. This allows an error return from the setup function.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4083)
Add missing ASN1_TIME functions
Do some cleanup of the ASN1_TIME code.
Add ASN1_TIME_normalize() to normalize ASN1_TIME structures.
Add ASN1_TIME_compare() to compare two ASN1_TIME structures.
Add ASN1_TIME_cmp_time_t() to compare an ASN1_TIME to time_t
(generic version of ASN1_UTCTIME_cmp_time_t()).
Replace '0' .. '9' compares with isdigit()
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2753)
Change the fixture types to pointers to structures that are heap allocated in the tests that use SETUP_TEST_FIXTURE. This will permit error returns from the setup function and allow for future running tests in parallel.
Also removed a call of `exit(2)` which allows the remaining tests to run if one fails to initialise.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4071)
If RAND_add wraps around, XOR with existing. Add test to drbgtest that
does the wrap-around.
Re-order seeding and stop after first success.
Add RAND_poll_ex()
Use the DF and therefore lower RANDOMNESS_NEEDED. Also, for child DRBG's,
mix in the address as the personalization bits.
Centralize the entropy callbacks, from drbg_lib to rand_lib.
(Conceptually, entropy is part of the enclosing application.)
Thanks to Dr. Matthias St Pierre for the suggestion.
Various code cleanups:
-Make state an enum; inline RANDerr calls.
-Add RAND_POLL_RETRIES (thanks Pauli for the idea)
-Remove most RAND_seed calls from rest of library
-Rename DRBG_CTX to RAND_DRBG, etc.
-Move some code from drbg_lib to drbg_rand; drbg_lib is now only the
implementation of NIST DRBG.
-Remove blocklength
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4019)
Removing the use of SETUP_TEST_FIXTURE reduces complxity in those tests that
used it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4066)
Simplify the only test that uses this macro so it doesn't need it anymore.
Clean up the formatting a little.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4034)
In TLSv1.3 we can resume, but still get a new session. This adds a test to
make sure that is happening.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4068)
Add functions to enumerate public key methods. Add test to ensure table
is in the correct order.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4015)
Documentation and test cases are also updated
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3783)
File::Glob::glob is deprecated, it's use generates this kind of
message:
File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at ../master/Configure line 277.
So instead, use a construction that makes the caller glob() use
File::Glob::bsd_glob().
Note that we're still excluding VMS, as it's directory specs use '['
and ']', which have a different meaning with bsd_glob and would need
some extra quoting. This might change, but later.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4040)
that needed test_main now works using the same infrastructure as tests that used
register_tests.
This meant:
* renaming register_tests to setup_tests and giving it a success/failure return.
* renaming the init_test function to setup_test_framework.
* renaming the finish_test function to pulldown_test_framework.
* adding a user provided global_init function that runs before the test frame
work is initialised. It returns a failure indication that stops the stest.
* adding helper functions that permit tests to access their command line args.
* spliting the BIO initialisation and finalisation out from the test setup and
teardown.
* hiding some of the now test internal functions.
* fix the comments in testutil.h
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3953)
OpenSSL already has the feature of SSL_MODE_RELEASE_BUFFERS that can
be set to release the read or write buffers when data has finished
reading or writing. OpenSSL will automatically re-allocate the buffers
as needed. This can be quite aggressive in terms of memory allocation.
This provides a manual mechanism. SSL_free_buffers() will free
the data buffers if there's no pending data. SSL_alloc_buffers()
will realloc them; but this function is not strictly necessary, as it's
still done automatically in the state machine.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2240)
There's a case when the environment variable OPENSSL_CONF is
useless... when cross compiling for mingw and your wine environment
has an environment variable OPENSSL_CONF. The latter will override
anything that's given when starting wine and there make the use of
that environment variable useless in our tests.
Therefore, we should not trust it, and use explicit '-config' options
instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3994)
Using Zeller's congruence to fill the day of week field,
Also populate the day of year field.
Add unit test to cover a number of cases.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3999)
Based on discussion in PR #3566. Reduce duplicated code in original
asn1_utctime_to_tm and asn1_generalizedtime_to_tm, and introduce a new
internal function asn1_time_to_tm. This function also checks if the days
in the input time string is valid or not for the corresponding month.
Test cases are also added.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3905)
Fixes: issue #3747
make SSL_CIPHER_standard_name globally available and introduce a new
function OPENSSL_cipher_name.
A new option '-convert' is also added to 'openssl ciphers' app.
Documentation and test cases are added.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3859)
Ported from the last FIPS release, with DUAL_EC and SHA1 and the
self-tests removed. Since only AES-CTR is supported, other code
simplifications were done. Removed the "entropy blocklen" concept.
Moved internal functions to new include/internal/rand.h.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3789)
This patch addresses the use of uninitialised data raised in Coverity
issues 1414881 and 1414882.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3929)
These cases are performed on Linux only. They check that files with
names starting with 'file:' can be processed as well.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3907)
to_rel_file_uri really treated all files appropriately, absolute and
relative alike, and really just constructs a URI, so gets renamed to
to_file_uri
to_file_uri, on the other hand, forces the path into an absolute one,
so gets renamed to to_abs_file_uri
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3907)
Add two tests with ECDSA+SHA256 preferred over Ed25519, the second also
excludes P-256 from the supported curves extension which will force the
use of Ed25519 in TLS 1.2, but not TLS 1.3: this would fail before the
certificate table updates.
Add TLS 1.3 test also with P-256 exclude from the groups extension: this
should have no effect as the groups extension is not used for signature
selection in TLS 1.3
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3858)
In most scenarios the length of the input data is the hashsize, or 0 if
the data is NULL. However with the new ticket_nonce changes the length can
be different.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3852)
Our test was using 32. The latest ticket nonce changes now validate this
value and so sslapitest was failing.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3852)
TAP::Parser::Aggregator::has_errors may return any number, not just 0
and 1. With Perl on VMS, any number from 2 and on is interpreted as a
VMS status, the 3 lower bits are the encoded severity (1 = SUCCESS,
for example), so depending on what has_errors returns, a test failure
might be interpreted as a success. Therefore, it's better to make
sure the exit code is 0 or 1, nothing else (they are special on VMS,
and mean SUCCESS or FAILURE, to match Unix conventions).
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3880)
VMS renames our libraries to fit VMS conventions. This must be accounted
for when we want to load them.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3880)
This macro aborted the process which stopped any later tests from running.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3838)
And BN_pseudo_rand_range is really BN_rand_range.
Document that we might deprecate those functions.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3743)
Instead, make it possible to disable the console reader that's part of
the UI module. This makes it possible to use the UI API and other UI
methods in environments where the console reader isn't useful.
To disable the console reader, configure with 'no-ui-console' /
'disable-ui-console'.
'no-ui' / 'disable-ui' is now an alias for 'no-ui-console' /
'disable-ui-console'.
Fixes#3806
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3820)
Remove some incorrect copyright references.
Move copyright to standard place
Add OpenSSL copyright where missing.
Remove copyrighted file that we don't use any more
Remove Itanium assembler for RC4 and MD5 (assembler versions of old and
weak algorithms for an old chip)
Standardize apps/rehash copyright comment; approved by Timo
Put dual-copyright notice on mkcert
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3691)
These tests were inspired by OpenConnect and incorporated
by permission of David Woodhouse under CLA
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3542)
There aren't any test vectors for this, so all we do is test that both
sides of the communication create the same result for different protocol
versions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3782)
uitest.o depends on apps.h which depends on progs.h, which is
dynamically generated, so we need to explicitely add a dependency
between uitest.o and progs.h for the latter to be generated in time.
Fixed#3793
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3794)
BIO_sock_init returns '-1' on error, not '0', so it's needed to check
explicitly istead of using '!'.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3766)
Test for each of DSA, SHA1, and SHA224.
Use the symbolic names for SignatureScheme comparisons just added.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3326)
We were adding more tests than we had data for due to use of
sizeof instead of OSSL_NELEM. I also changed the 8 bit tests
for consistency, although they were already working.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3755)
This macro aborts the test which prevents later tests from executing. It also
bypasses the test framework output functionality.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3750)
This is an implementation of a BIO filter that produce TAP compatible output
for the test framework. The current test indentation level is honoured.
The test output functions have been modified to not attempt to indent
their output and to not include the leading '#' character.
The filter is applied to bio_err only. bio_out is left unchanged, although
tests using bio_out have been modified to use bio_err instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3732)
Refactor count -> c which makes the for loop more readable.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3710)
Rework main() to be in the style of the other conditional tests.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3711)
and bignums. These have been refactored into their own file, along with
their error displays. The formatting follows the output format used
on error, except that bignums of sixty four bits or less are displayed
in a more compact one line form.
Added a TEST_note function for producing output without file and line
information.
Update the three tests that call BN_print so they use the new test
infrastructure instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3655)
Make it clear that we are pausing one of the connections and then
restarting it again.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3623)
This does things as per the recommendation in the TLSv1.3 spec. It also
means that the server will always choose its preferred ciphersuite.
Previously the server would only select ciphersuites compatible with the
session.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3623)
Test that if a server selects a differenct ciphersuite with the same hash
in TLSv1.3 then this is accepted by the client.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3623)
Also remove nested OPENSSL_NO_EC conditional; it was properly indented,
but a no-op.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3693)
Because apps/progs.h isn't configuration agnostic, it's not at all
suited for 'make update' or being versioned, so change it to be
dynamically generated.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3688)
Call it from the early callback used for testing these functions, and verify
the expected contents of the ClientHello
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2976)
Per the TODO comment, we now have proper certificate selection for
TLS 1.3 client certificates, so this test can move into its own
block. (It cannot merge with the previous block, as it requires EC.)
Verified that the test passes when configured with enable-tls1_3
no-tls1 no-tls1_1 no-tls1_2.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3131)
Make funcs to deal with non-null-term'd string
in both asn1_generalizedtime_to_tm() and asn1_utctime_to_tm().
Fixes issue #3444.
This one is used to enforce strict format (RFC 5280) check and to
convert GeneralizedTime to UTCTime.
apps/ca has been changed to use the new API.
Test cases and documentation are updated/added
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3566)
Move the call to ct_base64_decode(), which allocates, until after
the check for NULL output parameter.
Also place a cap on the number of padding characters used to decrement
the output length -- any more than two '='s is not permitted in a
well-formed base64 text. Prior to this change, ct_base64_decode() would
return a length of -1 along with allocated storage for an input of
"====".
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3379)
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3622)
During setup of a reneg test the server can refuse to start reneg.
If that happens we should let the client continue and then fail.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3432)
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3614)
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3614)
To test X509_check_private_key and relatives.
Add a CSR and corresponding RSA private key to test
X509_REQ_check_private_key function.
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3614)
Standardize file:line messages
Reduce buff size; move to end of STANZA
Add some Title entries (with blank line after)
Add Title to some BN test files.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3608)
Code was added in commit b3c31a65 that overwrote the last ex_data value
using CRYPTO_dup_ex_data() causing a memory leak, and potentially
confusing the ex_data dup() callback.
In ssl_session_dup(), fix error handling (properly reference and up-ref
shared data) and new-up the ex_data before calling CRYPTO_dup_ex_data();
all other structures that dup ex_data have the destination ex_data new'd
before the dup.
Fix up some of the ex_data documentation.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3323)
Add Ed25519 certificate verify test using certificate from
draft-ietf-curdle-pkix-04 and custom generated root certificate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3503)
The version number 3 means version 4, while 2 means version 3. Since this is the v3nametest, version 3 should be used.
CLA: Trivial
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3577)
Recently introduced TEST_* macros print variables' symbolic names.
In order to make error output more readable rename some variables.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Commit bd990e2535 changed our handling of alerts. Some of the BoringSSl
tests were expecting specific errors to be created if bad alerts were sent.
Those errors have now changed as a result of that commit, so the BoringSSL
test config needs to be updated to match.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3549)
Excess bytes, when one block is longer than the other, are not explicitly
highlighted.
The NULL / zero length block output has been cleaned up.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3515)
Fix the small arena test to just check for the symptom of the infinite
loop (i.e. initialized set on failure), rather than the actual infinite
loop. This avoids some valgrind errors.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3512)
Switch to TAP::Harness inadvertently masked test failures.
Test::Harness::runtests was terminating with non-zero exit code in case
of failure[s], while TAP::Harness apparently holds caller responsible
for doing so.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove assertion when mmap() fails.
Only run the 1<<31 limit test on Linux
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3455)
Import test data from sha1test.c, sha256t.c and sha512t.c which is
from RFC6234 section 8.5
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3451)
Allow multiple "Input" lines to call the update function multiple times.
Add "Ncopy" keyword to copy the input buffer. So for example:
Input = "a"
Ncopy = 1024
Will create a buffer consisting of 1024 "a" characters.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3451)
An alert message is 2 bytes long. In theory it is permissible in SSLv3 -
TLSv1.2 to fragment such alerts across multiple records (some of which
could be empty). In practice it make no sense to send an empty alert
record, or to fragment one. TLSv1.3 prohibts this altogether and other
libraries (BoringSSL, NSS) do not support this at all. Supporting it adds
significant complexity to the record layer, and its removal is unlikely
to cause inter-operability issues.
The DTLS code for this never worked anyway and it is not supported at a
protocol level for DTLS. Similarly fragmented DTLS handshake records only
work at a protocol level where at least the handshake message header
exists within the record. DTLS code existed for trying to handle fragmented
handshake records smaller than this size. This code didn't work either so
has also been removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3476)
Allow multiple file arguments.
Split bntests.txt into separate files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3471)
Issue 1:
sh.bittable_size is a size_t but i is and int, which can result in
freelist == -1 if sh.bittable_size exceeds an int.
This seems to result in an OPENSSL_assert due to invalid allocation
size, so maybe that is "ok."
Worse, if sh.bittable_size is exactly 1<<31, then this becomes an
infinite loop (because 1<<31 is a negative int, so it can be shifted
right forever and sticks at -1).
Issue 2:
CRYPTO_secure_malloc_init() sets secure_mem_initialized=1 even when
sh_init() returns 0.
If sh_init() fails, we end up with secure_mem_initialized=1 but
sh.minsize=0. If you then call secure_malloc(), which then calls,
sh_malloc(), this then enters an infite loop since 0 << anything will
never be larger than size.
Issue 3:
That same sh_malloc loop will loop forever for a size greater
than size_t/2 because i will proceed (assuming sh.minsize=16):
i=16, 32, 64, ..., size_t/8, size_t/4, size_t/2, 0, 0, 0, 0, ....
This sequence will never be larger than "size".
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3449)
In some cases, testutil outputs subtests like this:
1..6 # Subtest: progname
The standard set by Test::More (because there really is no actual
standard yet) gives this display:
# Subtest: progname
1..6
Until the standard is actually agreed upon, let's do it like
Test::More.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3446)
- Mostly missing fall thru comments
- And uninitialized value used in sslapitest.c
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3440)
Add file/line# to test error message.
Also remove expected/got fields since TEST structure prints them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3324)
Also, allow multiple files on commandline (for future splitup of
evptests.txt)
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3324)
TAP:Harness came along in perl 5.10.1, and since we claim to support
perl 5.10.0 in configuration and testing, we can only load it
conditionally.
The main reason to use TAP::Harness rather than Test::Harness is its
capability to merge stdout and stderr output from the test recipes,
which Test::Harness can't. The merge gives much more comprehensible
output when testing verbosely.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3424)
This includes support for:
- comparisions between pairs of BIGNUMs
- comparisions between BIGNUMs and zero
- equality comparison between BIGNUMs and one
- equality comparisons between BIGNUMs and constants
- parity checks for BIGNUMs
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3405)
Verify that we fail if we receive an HRR but no change will result in
ClientHello2.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3414)
Test that sending a non NULL compression method fails in TLSv1.3 as well
as other similar tests.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3410)
Get some trivial test coverage that this flag does what it claims to.
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1700)
Check we send supported_groups in EE if there is a group we prefer instead
of the one sent in the key_share.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3395)
The conditions to skip these recipes entirely don't show in a
non-verbose test harness output. We prefer to know, so use skip_all,
as it is a little bit more verbose.
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3398)
Some refactoring done as well.
The prime_field_tests() function needs splitting and refactoring still.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3340)
Fix warning/bug in rc5test
Remove useless/warning-only test from dsatest.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3387)
Format the test failure output more nicely.
More vertical space is used to make things a little clearer. Tests are expected
to pass so this doesn't impact the normal case.
Strings and memory comparisons highlight differences.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3357)
Because we now have TAP output for every mod_exp round, there's no
more need to mark the round with outputting a period.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3380)
The previous commit fixed a bug which occurs when serverinfo is loaded
from memory (not from a file). This adds a test for loading serverinfo
from memory.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3382)
Add padding callback for application control
Standard block_size callback
Documentation and tests included
Configuration file/s_client/s_srver option
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3130)
ASN1_GENERALIZEDTIME and ASN1_UTCTIME may be specified using offsets,
even though that's not supported within certificates.
To convert the offset time back to GMT, the offsets are supposed to be
subtracted, not added. e.g. 1759-0500 == 2359+0100 == 2259Z.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2654)
It occurs when memory compares are made that are larger
than the on stack temporary buffers (either malloced or supplied).
Rework the test test so it doesn't use a macro with a branch.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3155)
gcc's -Wextra pulls in -Wold-style-declaration, which triggers when a
declaration has a storage-class specifier as a non-initial qualifier.
The ISO C formal grammar requires the storage-class to be the first
component of the declaration, if present.
Seeint as the register storage-class specifier does not really have any effect
anymore with modern compilers, remove it entirely while we're here, instead of
fixing up the order.
Interestingly, the gcc devteam warnings do not pull in -Wextra, though
the clang ones do.
[extended tests]
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3239)
Also added a internal error printing callback to be used both with
ERR_print_errors_cb() and with CRYPTO_mem_leaks_cb
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3345)
These functions aren't meant to be used directly by the test programs,
reflect that by making the declarations a little harder to reach, but
still available enough if there's a need to override them.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3345)
Enforcement of an SNI extension in the initial ClientHello is becoming
increasingly common (e.g. see GitHub issue #2580). This commit changes
s_client so that it adds SNI be default, unless explicitly told not to via
the new "-noservername" option.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2614)
Also converted most of ssltestlib but left the packet_dump output
as-is (for now).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3257)
Updated due to test framework changes
Updates after code review
Missed some checks
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3269)
The previous commits added sanity checks for where the max enabled protocol
version does not have any configured ciphersuites. We should check that we
fail in those circumstances.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3316)
Ensure that there are ciphersuites enabled for the maximum supported
version we will accept in a ClientHello.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3316)
Ensure that there are ciphersuites enabled for the maximum supported
version we are claiming in the ClientHello.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3316)
Original rationale behind using write in testutil was to accommodate
no-stdio builds. But is there evidence that no-stdio users would have
write or pre-defined meaning for file descriptors 1 and 2? Correct
answer is to provide way for no-stdio users who want to exercise
tests to plug in own BIO, not to make assumption that they have write.
And since we don't have to make such assumption, we can as well go
for simplest that works with standard library as specified by C
language standard.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This includes better signals of skips and subtests according to TAP 12,
and flushing stdout and stderr at the end of every test function to
make sure we get the output in good order.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3309)
The CA names should be printed according to user's decision
print_name instead of set of BIO_printf
dump_cert_text instead of set of BIO_printf
Testing cyrillic output of X509_CRL_print_ex
Write and use X509_CRL_print_ex
Reduce usage of X509_NAME_online
Using X509_REQ_print_ex instead of X509_REQ_print
Fix nameopt processing.
Make dump_cert_text nameopt-friendly
Move nameopt getter/setter to apps/apps.c
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3262)
With the perl test framework comes the output format TAP
(Test Anything Protocol, see http://testanything.org/) with
extra extension for subtests. This change extends that same
output format to any test program using testutil.
In this implementation, each test program is seen as a full test that
can be used as a subtest. The perl framework passes on the subtest
level to the test programs with the environment variable
HARNESS_OSSL_LEVEL. Furthermore, and series of tests added with
ADD_ALL_TESTS is regarded as another subtest level.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3296)
It's now built as a static library, and greatly simplified for test
programs, which no longer need to include test_main_custom.h or
test_main.h and link with the corresponding object files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3243)
This includes reworked reworked tests to do both encrypt and decrypt,
and a few more ciphers added.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3197)
Previously, BN_is_prime_fasttest_ex, when doing trial-division, would
check whether the candidate is a multiple of a number of small primes
and, if so, reject it. However, three is a multiple of three yet is
still a prime number.
This change accepts small primes as prime when doing trial-division.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3264)
X509_STORE_add_cert and X509_STORE_add_crl are changed to return
success if the object to be added was already found in the store, rather
than returning an error.
Raise errors if empty or malformed files are read when loading certificates
and CRLs.
Remove NULL checks and allow a segv to occur.
Add error handing for all calls to X509_STORE_add_c{ert|tl}
Refactor these two routines into one.
Bring the unit test for duplicate certificates up to date using the test
framework.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2830)
Updated after code review, and fix indenting
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3175)
Note that these guards are still needed around local header files that
declare linkable symbols.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3259)
The internals test programs access header files that aren't guarded by
the public __DECC_INCLUDE_PROLOGUE.H and __DECC_INCLUDE_EPILOGUE.H files,
and therefore have no idea what the naming convention is. Therefore, we
need to specify that explicitely in the internals test programs, since
they aren't built with the same naming convention as the library they
belong with.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3247)
ct_test,evp_extra_test,wpackettest,packettest
Add strncmp TEST wrappers
And make some style/consistency fixes to ct_test
Silence travis; gcc bug?
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3234)
randtest, cipher_overhead_test, bioprintest, constant_time_test
Move test_bioprint to 04 group
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3228)
If EC support is enabled we should catch also EC_R_UNKNOWN_GROUP as an hint to
an unsupported algorithm/curve (e.g. if binary EC support is disabled).
Before this commit the issue arise for example if binary EC keys are added in
evptests.txt, and the test is run when EC is enabled but EC2m is disabled.
E.g. adding these lines to evptests.txt would reproduce the issue:
~~~
PrivateKey=KAS-ECC-CDH_K-163_C0
-----BEGIN PRIVATE KEY-----
MGMCAQAwEAYHKoZIzj0CAQYFK4EEAAEETDBKAgEBBBUAZlO2B3OY+tx79eYBWBcB
SMPcRSehLgMsAAQHH4sod9YCfZwa3kJE8t6hJpLvI9UFwV7ndiIccrhLNHzjg/OA
Z7icPpo=
-----END PRIVATE KEY-----
PublicKey=KAS-ECC-CDH_K-163_C0-PUBLIC
-----BEGIN PUBLIC KEY-----
MEAwEAYHKoZIzj0CAQYFK4EEAAEDLAAEBx+LKHfWAn2cGt5CRPLeoSaS7yPVBcFe
53YiHHK4SzR844PzgGe4nD6a
-----END PUBLIC KEY-----
PublicKey=KAS-ECC-CDH_K-163_C0-Peer-PUBLIC
-----BEGIN PUBLIC KEY-----
MEAwEAYHKoZIzj0CAQYFK4EEAAEDLAAEBXQjbxQoxDITCUZ4Ols6q7bCfqXWB5CM
JRuNoCHLrCgfEj969PrFs9u4
-----END PUBLIC KEY-----
Derive=KAS-ECC-CDH_K-163_C0
PeerKey=KAS-ECC-CDH_K-163_C0-Peer-PUBLIC
Ctrl=ecdh_cofactor_mode:1
SharedSecret=04325bff38f1b0c83c27f554a6c972a80f14bc23bc
~~~
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3226)
When compiling without EC support the test fails abruptly reading some keys.
Some keys merged in commit db04055 start with
------BEGIN EC PRIVATE KEY-----
this format is not supported without EC support.
This commit reformat those keys with the generic format. After this change the
test simply skips the unsupported EC keys when EC is disabled, without parsing
errors.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3223)
All tests from ecdhtest.c have been ported to evptests.txt
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3219)
If $_ is not private, it can wipe caller's one, which proved to be
problematic...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add test case that checks some of them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3208)
The only SSL tests prior to this tested using certificates with no
embedded Signed Certificate Timestamps (SCTs), which meant they couldn't
confirm whether Certificate Transparency checks in "strict" mode were
working.
These tests reveal a bug in the validation of SCT timestamps, which is
fixed by the next commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3138)
95-test_external_boringssl.t had a specialised run() variant to prefix
the command output so it wouldn't disturb Test::Harness. This
functionality if now moved to the run() command, using the added
option 'prefix' that can be set to the string to prefix the output
with.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3201)
Because stdout is usually buffered and stderr isn't, error output
might get printed in one bunch and all the lines saying which test
failed all in one bunch, making it difficult to see exactly what error
output belongs to what test. Flushing stdout makes sure the runner
output is displayed together with the corresponding error output.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3198)
information.
The framework will display the non-matching memory.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3156)
We're already checking that custom DER decodes to expected values (or
fails to do so), but we didn't check if values encode back to expected
DER.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3174)
It isn't easy to use the test framework since it turns memory debugging
on as well and the CRYPTO_mem_leaks_fp function cannot be called twice.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3169)
RFC 7301 mandates that the server SHALL respond with a fatal
"no_application_protocol" alert when there is no overlap between
the client's supplied list and the server's list of supported protocols.
In commit 062178678f we changed from
ignoring non-success returns from the supplied alpn_select_cb() to
treating such non-success returns as indicative of non-overlap and
sending the fatal alert.
In effect, this is using the presence of an alpn_select_cb() as a proxy
to attempt to determine whether the application has configured a list
of supported protocols. However, there may be cases in which an
application's architecture leads it to supply an alpn_select_cb() but
have that callback be configured to take no action on connections that
do not have ALPN configured; returning SSL_TLSEXT_ERR_NOACK from
the callback would be the natural way to do so. Unfortunately, the
aforementioned behavior change also treated SSL_TLSEXT_ERR_NOACK as
indicative of no overlap and terminated the connection; this change
supplies special handling for SSL_TLSEXT_ERR_NOACK returns from the
callback. In effect, it provides a way for a callback to obtain the
behavior that would have occurred if no callback was registered at
all, which was not possible prior to this change.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2570)
Don't compile code that still uses LONG when it's deprecated
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3126)
It's sheer luck that this was used for the first field only which also
has the same type in all data structures, so the offsets were never wrong
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3127)
Make sure the server can write normal data after earlier writing early data.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3091)
Commit 9b5c865df introduced a synthetic delay between arrival of EoED and
CF. We actually want to delay the arrival of CF even further to demonstrate
that we can write early data even when "in init".
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3091)
This test doesn't actually fail completely, but there's no real
pattern to distinguish which data files should be omitted when no-ec2m
is configured and which should not.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3103)
'j' is specified as modifier for "greatest-width integer type", which in
practice means 64 bits on both 32- and 64-bit platforms. Since we rely
on __attribute__((__format__(__printf__,...))) to sanitize BIO_print
format, we can use it to denote [u]int64_t-s in platform-neutral manner.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3083)
This tests the bug fixed in the previous commit. We introduce a synthetic
delay between the server receiving EoED and CF and check that we can still
send early data.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3089)
We want to make sure that if we if are using SSL_MODE_AUTO_RETRY then
if SSL_read_early_data() hits EndOfEarlyData then it doesn't auto retry
and end up with normal data. The same issue could occur with read_ahead
which is what we use in this test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3077)
Fix some comments too
[skip ci]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3069)
Remove unnecessary include of apps.h. Tests shouldn't take a
dependency on apps. In this case, there is no dependency, the include
is unnecessary.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Also, be less silent when installing, so possible errors are shown.
[extended tests]
Fixes#3005
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3007)
When using run() with capture => 1, there was no way to find out if
the command was successful or not. This change adds a statusvar
option, that must refer to a scalar variable, for example:
my $status = undef;
my @line = run(["whatever"], capture => 1, statusvar => \$status);
$status will be 1 if the command "whatever" was successful, 0
otherwise.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3004)
The code to do this incorrectly assumed that the protocol version
could be used as a valid cipher suite for the 'openssl cipher'
command. While this is true in some cases, that isn't something to be
trusted. Replace that assumption with code that takes the full
'openssl ciphers' command output and parses it to find the ciphers we
look for.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2956)
Fix a strict aliasing issue in ui_dup_method_data.
Add test coverage for CRYPTO_dup_ex_data, use OPENSSL_assert.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2988)
The internals tests for chacha, poly1305 and siphash were erroneously
made conditional on if mdc2 was enabled. Corrected to depend on the
correct algorithms being enabled instead.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2991)
Add a test recipe (test/recipes/15-test_ecparams.t) which uses 'openssl
ecparam' to check the test vectors.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2544)