Also, be less silent when installing, so possible errors are shown.
[extended tests]
Fixes#3005
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3007)
When using run() with capture => 1, there was no way to find out if
the command was successful or not. This change adds a statusvar
option, that must refer to a scalar variable, for example:
my $status = undef;
my @line = run(["whatever"], capture => 1, statusvar => \$status);
$status will be 1 if the command "whatever" was successful, 0
otherwise.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3004)
These two functions do the same thing.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3001)
Commit 6b1bb98fa moved the processing of ClientHello extensions into the
state machine post-processing stage. After processing s->init_num is reset
to 0, so by post-processing we cannot rely on its value. Unfortunately we
were using it to handle the PSK extension. This causes the handshake to
fail.
We were using init_num to figure out the length of ClientHello2 so we can
remove it from the handshake_buffer. The handshake_buffer holds the
transcript of all the messages sent so far. For PSK processing though we
only want to add in a partial ClientHello2. This commit changes things so
we just work out where ClientHello2 starts, working forward from the
beginning of handshake_buffer.
Fixes#2983
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2996)
The code to do this incorrectly assumed that the protocol version
could be used as a valid cipher suite for the 'openssl cipher'
command. While this is true in some cases, that isn't something to be
trusted. Replace that assumption with code that takes the full
'openssl ciphers' command output and parses it to find the ciphers we
look for.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2956)
LONG and ZLONG items (which are OpenSSL private special cases of
ASN1_INTEGER) are encoded into DER with padding if the leading octet
has the high bit set, where the padding can be 0x00 (for positive
numbers) or 0xff (for negative ones).
When decoding DER to LONG or ZLONG, the padding wasn't taken in
account at all, which means that if the encoded size with padding
is one byte more than the size of long, decoding fails. This change
fixes that issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3000)
They both return 2 when the revoked entry that's found has the reason
removeFromCRL.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2993)
Fix a strict aliasing issue in ui_dup_method_data.
Add test coverage for CRYPTO_dup_ex_data, use OPENSSL_assert.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2988)
The internals tests for chacha, poly1305 and siphash were erroneously
made conditional on if mdc2 was enabled. Corrected to depend on the
correct algorithms being enabled instead.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2991)
Add a test recipe (test/recipes/15-test_ecparams.t) which uses 'openssl
ecparam' to check the test vectors.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2544)
This involves:
- A directory of valid and invalid PEM-encoded curves.
This is non-exhaustive and can be added to.
- A minor patch to 'openssl ecparam' to make it exit non-zero
when curve validation fails.
- A test recipe is added in a separate commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2544)
These were still generated by openssl, but with
the previous commit are corroborated by rustls.
(cherry picked from commit eae1982619e90c6b79a6ebc89603d81c13c81ce8)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2989)
This label for this derivation was incorrectly "derived" or "der" depending
on the pointer size of the build(!). The correct string is "derived secret".
(cherry picked from commit 936dcf272033c1bf59a5e859ec63e2557194f191)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2989)
Add it in the options section, not the "Connected commands" section.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2977)
The documentation of this function states that the password parameter
can be NULL. However, the implementation returns an error in this case
due to the inner workings of the HMAC_Init_ex() function.
With this change, NULL password will be treated as an empty string and
PKCS5_PBKDF2_HMAC() no longer fails on this input.
I have also added two new test cases that tests the handling of the
special values NULL and -1 of the password and passlen parameters,
respectively.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1692)
Commits f2ff1432f in master and 14d4d7eda in 1.1.0 broke the no-dtls build
by moving the position of a "#endif" for OPENSSL_NO_DTLS in a change
which is otherwise unrelated to DTLS. This puts it back to where it was.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2974)
At one point the stack was passing a pointer of the element *before* an
array which is undefined.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2971)
Add ExpectedClientCANames: for client auth this checks to see if the
list of certificate authorities supplied by the server matches the
expected value.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2969)
In OpenSSL 1.1.0 the padding extension MUST be last because it calculates
the length of everything that has been written into the ClientHello to
determine whether it needs to be padded or not. With TLSv1.3 that isn't
possible because the specification requires that the PSK extension is last.
Therefore we need to fix the padding extension to take account of any PSK
extension that will be later added.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2968)
Check that we handle changes of ciphersuite between HRR and ServerHello
correctly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
Test that if the server selects a ciphersuite with a different hash from
the PSK in the original ClientHello, the second ClientHello does not
contain the PSK.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
Choose a new ciphersuite for the HRR. Don't just use the one from the
session.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
Don't include a PSK that does not have the right hash for the selected
ciphersuite following an HRR.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
Draft-19 changes the HRR transcript hash so that the initial ClientHello
is replaced in the transcript with a special synthetic message_hash message
that just contains a hash of ClientHello1 as its message body.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
The end of early data is now indicated by a new handshake message rather
than an alert.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
These are self-generated test vectors which gives us very little
confidence that we've got the implementation right. However until
we can get vectors from somewhere else (or ideally official vectors)
this is all we've got. At least it will tell us if we accidentally
break something at some point in the future.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
