Initialize pointers in param id by the book (explicit NULL assignment,
rather than just memset 0).
In x509_verify_param_zero() set peername to NULL after freeing it.
In x509_vfy.c's internal check_hosts(), avoid potential leak of
possibly already non-NULL peername. This is only set when a check
succeeds, so don't need to do this repeatedly in the loop.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix more potential leaks in X509_verify_cert()
Fix memory leak in ClientHello test
Fix memory leak in gost2814789 test
Fix potential memory leak in PKCS7_verify()
Fix potential memory leaks in X509_add1_reject_object()
Refactor to use "goto err" in cleanup.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
This was obsolete in 2001. This is not the same as Gost94 digest.
Thanks to Dmitry Belyavsky <beldmit@gmail.com> for review and advice.
Reviewed-by: Matt Caswell <matt@openssl.org>
The -show_chain flag to the verify command line app shows information about
the chain that has been built. This commit adds the text "untrusted" against
those certificates that have been used from the untrusted list.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The function X509_verify_cert checks the value of |ctx->chain| at the
beginning, and if it is NULL then it initialises it, along with the value
of ctx->untrusted. The normal way to use X509_verify_cert() is to first
call X509_STORE_CTX_init(); then set up various parameters etc; then call
X509_verify_cert(); then check the results; and finally call
X509_STORE_CTX_cleanup(). The initial call to X509_STORE_CTX_init() sets
|ctx->chain| to NULL. The only place in the OpenSSL codebase where
|ctx->chain| is set to anything other than a non NULL value is in
X509_verify_cert itself. Therefore the only ways that |ctx->chain| could be
non NULL on entry to X509_verify_cert is if one of the following occurs:
1) An application calls X509_verify_cert() twice without re-initialising
in between.
2) An application reaches inside the X509_STORE_CTX structure and changes
the value of |ctx->chain| directly.
With regards to the second of these, we should discount this - it should
not be supported to allow this.
With regards to the first of these, the documentation is not exactly
crystal clear, but the implication is that you must call
X509_STORE_CTX_init() before each call to X509_verify_cert(). If you fail
to do this then, at best, the results would be undefined.
Calling X509_verify_cert() with |ctx->chain| set to a non NULL value is
likely to have unexpected results, and could be dangerous. This commit
changes the behaviour of X509_verify_cert() so that it causes an error if
|ctx->chain| is anything other than NULL (because this indicates that we
have not been initialised properly). It also clarifies the associated
documentation. This is a follow up commit to CVE-2015-1793.
Reviewed-by: Stephen Henson <steve@openssl.org>
During certificate verfification, OpenSSL will attempt to find an
alternative certificate chain if the first attempt to build such a chain
fails. An error in the implementation of this logic can mean that an
attacker could cause certain checks on untrusted certificates to be
bypassed, such as the CA flag, enabling them to use a valid leaf
certificate to act as a CA and "issue" an invalid certificate.
This occurs where at least one cert is added to the first chain from the
trust store, but that chain still ends up being untrusted. In that case
ctx->last_untrusted is decremented in error.
Patch provided by the BoringSSL project.
CVE-2015-1793
Reviewed-by: Stephen Henson <steve@openssl.org>
Also tighten X509_cmp_time to reject more than three fractional
seconds in the time; and to reject trailing garbage after the offset.
CVE-2015-1789
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Using an enum with -Wswitch means all lookup routines handle
all cases. Remove X509_LU_PKEY which was never used.
Reviewed-by: Richard Levitte <levitte@openssl.org>
We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in. This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.
This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are header files in crypto/ that are used by a number of crypto/
submodules. Move those to crypto/include/internal and adapt the
affected source code and Makefiles.
The header files that got moved are:
crypto/cryptolib.h
crypto/md32_common.h
Reviewed-by: Rich Salz <rsalz@openssl.org>
Compiling OpenSSL code with MSVC and /W4 results in a number of warnings.
One category of warnings is particularly interesting - C4701 (potentially
uninitialized local variable 'name' used). This warning pretty much means
that there's a code path which results in uninitialized variables being used
or returned. Depending on compiler, its options, OS, values in registers
and/or stack, the results can be nondeterministic. Cases like this are very
hard to debug so it's rational to fix these issues.
This patch contains a set of trivial fixes for all the C4701 warnings (just
initializing variables to 0 or NULL or appropriate error code) to make sure
that deterministic values will be returned from all the execution paths.
RT#3835
Signed-off-by: Matt Caswell <matt@openssl.org>
Matt's note: All of these appear to be bogus warnings, i.e. there isn't
actually a code path where an unitialised variable could be used - its just
that the compiler hasn't been able to figure that out from the logic. So
this commit is just about silencing spurious warnings.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy. Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
After the finale, the "real" final part. :) Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Don't check for NULL before calling a free routine. This gets X509_.*free:
x509_name_ex_free X509_policy_tree_free X509_VERIFY_PARAM_free
X509_STORE_free X509_STORE_CTX_free X509_PKEY_free
X509_OBJECT_free_contents X509_LOOKUP_free X509_INFO_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
Do not check for NULL before calling a free routine. This addresses:
ASN1_BIT_STRING_free ASN1_GENERALIZEDTIME_free ASN1_INTEGER_free
ASN1_OBJECT_free ASN1_OCTET_STRING_free ASN1_PCTX_free ASN1_SCTX_free
ASN1_STRING_clear_free ASN1_STRING_free ASN1_TYPE_free
ASN1_UTCTIME_free M_ASN1_free_of
Reviewed-by: Richard Levitte <levitte@openssl.org>
With no more symlinks, there's no need for those variables, or the links
target. This also goes for all install: and uninstall: targets that do
nothing but copy $(EXHEADER) files, since that's now taken care of by the
top Makefile.
Also, removed METHTEST from test/Makefile. It looks like an old test that's
forgotten...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rather than making include/openssl/foo.h a symlink to
crypto/foo/foo.h, this change moves the file to include/openssl/foo.h
once and for all.
Likewise, move crypto/foo/footest.c to test/footest.c, instead of
symlinking it there.
Originally-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove partially implemented d2i_X509_PKEY and i2d_X509_PKEY: nothing
uses them and they don't work properly. Update ordinals.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
EVP_.*free; this gets:
EVP_CIPHER_CTX_free EVP_PKEY_CTX_free EVP_PKEY_asn1_free
EVP_PKEY_asn1_set_free EVP_PKEY_free EVP_PKEY_free_it
EVP_PKEY_meth_free; and also EVP_CIPHER_CTX_cleanup
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The X509_ATTRIBUTE structure includes a hack to tolerate malformed
attributes that encode as the type instead of SET OF type. This form
is never created by OpenSSL and shouldn't be needed any more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Disable loop checking when we retry verification with an alternative path.
This fixes the case where an intermediate CA is explicitly trusted and part
of the untrusted certificate list. By disabling loop checking for this case
the untrusted CA can be replaced by the explicitly trusted case and
verification will succeed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Remove old M_ASN1_ macros and replace any occurences with the corresponding
function.
Remove d2i_ASN1_bytes, d2i_ASN1_SET, i2d_ASN1_SET: no longer used internally.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove DECLARE_ASN1_SET_OF and DECLARE_PKCS12_STACK_OF these haven't been
used internally in OpenSSL for some time.
Reviewed-by: Rich Salz <rsalz@openssl.org>
valid. However the issuer of the leaf, or some intermediate cert is in fact
in the trust store.
When building a trust chain if the first attempt fails, then try to see if
alternate chains could be constructed that are trusted.
RT3637
RT3621
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
The mkstack.pl script now generates the entire safestack.h file.
It generates output that follows the coding style.
Also, removed all instances of the obsolete IMPLEMENT_STACK_OF
macro.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Remove support for SHA0 and DSS0 (they were broken), and remove
the ability to attempt to build without SHA (it didn't work).
For simplicity, remove the option of not building various SHA algorithms;
you could argue that SHA_224/256/384/512 should be kept, since they're
like crypto algorithms, but I decided to go the other way.
So these options are gone:
GENUINE_DSA OPENSSL_NO_SHA0
OPENSSL_NO_SHA OPENSSL_NO_SHA1
OPENSSL_NO_SHA224 OPENSSL_NO_SHA256
OPENSSL_NO_SHA384 OPENSSL_NO_SHA512
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove OPENSSL_NO_RFCF3779.
Also, makevms.com was ignored by some of the other cleanups, so
I caught it up. Sorry I ignored you, poor little VMS...
Reviewed-by: Richard Levitte <levitte@openssl.org>
The following compile options (#ifdef's) are removed:
OPENSSL_NO_BIO OPENSSL_NO_BUFFER OPENSSL_NO_CHAIN_VERIFY
OPENSSL_NO_EVP OPENSSL_NO_FIPS_ERR OPENSSL_NO_HASH_COMP
OPENSSL_NO_LHASH OPENSSL_NO_OBJECT OPENSSL_NO_SPEED OPENSSL_NO_STACK
OPENSSL_NO_X509 OPENSSL_NO_X509_VERIFY
This diff is big because of updating the indents on preprocessor lines.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Sometimes it fails to format them very well, and sometimes it corrupts them!
This commit moves some particularly problematic ones.
Reviewed-by: Tim Hudson <tjh@openssl.org>
OPENSSL_NO_RIPEMD160, OPENSSL_NO_RIPEMD merged into OPENSSL_NO_RMD160
OPENSSL_NO_FP_API merged into OPENSSL_NO_STDIO
Two typo's on #endif comments fixed:
OPENSSL_NO_ECB fixed to OPENSSL_NO_OCB
OPENSSL_NO_HW_SureWare fixed to OPENSSL_NO_HW_SUREWARE
Reviewed-by: Richard Levitte <levitte@openssl.org>
By using non-DER or invalid encodings outside the signed portion of a
certificate the fingerprint can be changed without breaking the signature.
Although no details of the signed portion of the certificate can be changed
this can cause problems with some applications: e.g. those using the
certificate fingerprint for blacklists.
1. Reject signatures with non zero unused bits.
If the BIT STRING containing the signature has non zero unused bits reject
the signature. All current signature algorithms require zero unused bits.
2. Check certificate algorithm consistency.
Check the AlgorithmIdentifier inside TBS matches the one in the
certificate signature. NB: this will result in signature failure
errors for some broken certificates.
3. Check DSA/ECDSA signatures use DER.
Reencode DSA/ECDSA signatures and compare with the original received
signature. Return an error if there is a mismatch.
This will reject various cases including garbage after signature
(thanks to Antti Karjalainen and Tuomo Untinen from the Codenomicon CROSS
program for discovering this case) and use of BER or invalid ASN.1 INTEGERs
(negative or with leading zeroes).
CVE-2014-8275
Reviewed-by: Emilia Käsper <emilia@openssl.org>
When calling X509_set_version to set v1 certificate, that
should mean that the version number field is omitted.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
i2d_re_X509_tbs re-encodes the TBS portion of the certificate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
Add a declaration for get_issuer_sk() so that other
functions in x509_vf.c could use it. (Planned work
around cross-certification chains.)
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reduces number of silly casts in OpenSSL code and likely most
applications. Consistent with (char *) for "peername" value from
X509_check_host() and X509_VERIFY_PARAM_get0_peername().
When looking for the issuer of a certificate, if current candidate is
expired, continue looking. Only return an expired certificate if no valid
certificates are found.
PR#3359
When a chain is complete and ends in a trusted root checks are also
performed on the TA and the callback notified with ok==1. For
consistency do the same for chains where the TA is not self signed.
Move the IP, email and host checking fields from the public
X509_VERIFY_PARAM structure into an opaque X509_VERIFY_PARAM_ID
structure. By doing this the structure can be modified in future
without risk of breaking any applications.
(cherry picked from commit adc6bd73e3)
Conflicts:
crypto/x509/x509_vpm.c
For consistency with other cases if we are performing
partial chain verification with just one certificate
notify the callback with ok==1.
(cherry picked from commit 852553d9005e13aed7feb986a5d71cb885b994c7)
PR #3090
Reported by: Franck Youssef <fry@open.ch>
If no new reason codes are obtained after checking a CRL exit with an
error to avoid repeatedly checking the same CRL.
This will only happen if verify errors such as invalid CRL scope are
overridden in a callback.
Reencode certificates in X509_sign_ctx as well as X509_sign.
This was causing a problem in the x509 application when it modified an
existing certificate.
New function X509_chain_up_ref to dup and up the reference count of
a STACK_OF(X509): replace equivalent functionality in several places
by the equivalent call.
this means that some implementations will be used automatically, e.g. aesni,
we do this for cryptodev anyway.
Setup cpuid in ENGINE_load_builtin_engines() too as some ENGINEs use it.
now print out signatures instead of the standard hex dump.
More complex signatures (e.g. PSS) can print out more meaningful information.
Sample DSA version included that prints out the signature parameters r, s.
[Note EVP_PKEY_ASN1_METHOD is an application opaque structure so adding
new fields in the middle has no compatibility issues]
certificate is explicitly trusted (using -addtrust option to x509 utility
for example) the verification is sucessful even if the chain is not complete.
Submitted by: steve@openssl.org
Include a flag ASN1_STRING_FLAG_MSTRING when a multi string type is created.
This makes it possible to tell if the underlying type is UTCTime,
GeneralizedTime or Time when the structure is reused and X509_time_adj_ex()
can handle each case in an appropriate manner.
Add error checking to CRL generation in ca utility when nextUpdate is being
set.
.DLL, in particular static build. The issue has been discussed in RT#1230
and later on openssl-dev, and mutually exclusive approaches were suggested.
This completes compromise solution suggested in RT#1230.
PR: 1230
knock-on work than expected - they've been extracted into a patch
series that can be completed elsewhere, or in a different branch,
before merging back to HEAD.
with the appropriate parameters which calls OBJ_bsearch(). A compiler will
typically inline this.
This avoids the need for cmp_xxx variables and fixes unchecked const issues
with CHECKED_PTR_OF()
Delete X509_POLICY_REF code.
Fix handling of invalid policy extensions to return the correct error.
Add command line option to inhibit policy mappings.
Ignore self issued certificates when checking path length constraints.
Duplicate OIDs in policy tree in case they are allocated.
Use anyPolicy from certificate cache and not current tree level.
of handshake failure
2. Changes to x509_certificate_type function (crypto/x509/x509type.c) to
make it recognize GOST certificates as EVP_PKT_SIGN|EVP_PKT_EXCH
(required for s3_srvr to accept GOST client certificates).
3. Changes to EVP
- adding of function EVP_PKEY_CTX_get0_peerkey
- Make function EVP_PKEY_derive_set_peerkey work for context with
ENCRYPT operation, because we use peerkey field in the context to
pass non-ephemeral secret key to GOST encrypt operation.
- added EVP_PKEY_CTRL_SET_IV control command. It is really
GOST-specific, but it is used in SSL code, so it has to go
in some header file, available during libssl compilation
4. Fix to HMAC to avoid call of OPENSSL_cleanse on undefined data
5. Include des.h if KSSL_DEBUG is defined into some libssl files, to
make debugging output which depends on constants defined there, work
and other KSSL_DEBUG output fixes
6. Declaration of real GOST ciphersuites, two authentication methods
SSL_aGOST94 and SSL_aGOST2001 and one key exchange method SSL_kGOST
7. Implementation of these methods.
8. Support for sending unsolicited serverhello extension if GOST
ciphersuite is selected. It is require for interoperability with
CryptoPro CSP 3.0 and 3.6 and controlled by
SSL_OP_CRYPTOPRO_TLSEXT_BUG constant.
This constant is added to SSL_OP_ALL, because it does nothing, if
non-GOST ciphersuite is selected, and all implementation of GOST
include compatibility with CryptoPro.
9. Support for CertificateVerify message without length field. It is
another CryptoPro bug, but support is made unconditional, because it
does no harm for draft-conforming implementation.
10. In tls1_mac extra copy of stream mac context is no more done.
When I've written currently commited code I haven't read
EVP_DigestSignFinal manual carefully enough and haven't noticed that
it does an internal digest ctx copying.
This implementation was tested against
1. CryptoPro CSP 3.6 client and server
2. Cryptopro CSP 3.0 server
loaded. Add new function X509_CRL_get0_by_serial() to lookup a revoked
entry to avoid the need to access the structure directly.
Add new X509_CRL_METHOD to allow common CRL operations (verify, lookup) to be
redirected.
key ASN1 handling through a single EVP_PKEY_ASN1_METHOD structure and move
the spaghetti algorithm specific code to a single ASN1 module for each
algorithm.
- Enforce that there should be no policy settings when the language
is one of id-ppl-independent or id-ppl-inheritAll.
- Add functionality to ssltest.c so that it can process proxy rights
and check that they are set correctly. Rights consist of ASCII
letters, and the condition is a boolean expression that includes
letters, parenthesis, &, | and ^.
- Change the proxy certificate configurations so they get proxy
rights that are understood by ssltest.c.
- Add a script that tests proxy certificates with SSL operations.
Other changes:
- Change the copyright end year in mkerr.pl.
- make update.
CA setting in each certificate on the chain is correct. As a side-
effect always do the following basic checks on extensions, not just
when there's an associated purpose to the check:
- if there is an unhandled critical extension (unless the user has
chosen to ignore this fault)
- if the path length has been exceeded (if one is set at all)
- that certain extensions fit the associated purpose (if one has been
given)
This tidies up verify parameters and adds support for integrated policy
checking.
Add support for policy related command line options. Currently only in smime
application.
WARNING: experimental code subject to change.
functions and macros.
This change has associated tags: LEVITTE_before_const and
LEVITTE_after_const. Those will be removed when this change has been
properly reviewed.
VMS. The C RTL can handle it well if the "directory" is a logical
name with no colon, therefore ending being 'logname/file'. However,
if the given logical names actually has a colon, or if you use a full
VMS-syntax directory, you end up with 'logname:/file' or
'dev:[dir1.dir2]/file', and that isn't handled in any good way.
So, on VMS, we need to check if the directory string ends with a
separator (one of ':', ']' or '>' (< and > can be used instead [ and
])), and handle that by not inserting anything between the directory
spec and the file name. In all other cases, it's assumed the
directory spec is a logical name, so we need to place a colon between
it and the file.
Notified by Kevin Greaney <kevin.greaney@hp.com>.
Use BUF_strlcat() instead of strcat().
Use BIO_snprintf() instead of sprintf().
In some cases, keep better track of buffer lengths.
This is part of a large change submitted by Markus Friedl <markus@openbsd.org>
I have tried to convert 'len' type variable declarations to unsigned as a
means to address these warnings when appropriate, but when in doubt I have
used casts in the comparisons instead. The better solution (that would get
us all lynched by API users) would be to go through and convert all the
function prototypes and structure definitions to use unsigned variables
except when signed is necessary. The proliferation of (signed) "int" for
strictly non-negative uses is unfortunate.
defined as follows (according to X.509_4thEditionDraftV6.pdf):
CertificatePair ::= SEQUENCE {
forward [0] Certificate OPTIONAL,
reverse [1] Certificate OPTIONAL,
-- at least one of the pair shall be present -- }
The only thing I'm not sure about is if it's implicit or explicit tags
that I should count on. For now, I'm thinking explicit, but will
gladly stand corrected.
Also implement the PEM functions to read and write certificate pairs,
and defined the PEM tag as "CERTIFICATE PAIR".
This needed to be defined, mostly for the sake of the LDAP attribute
crossCertificatePair, but may prove useful elsewhere as well.
Additional changes:
- use EC_GROUP_get_degree() in apps/req.c
- add ECDSA and ECDH to apps/speed.c
- adds support for EC curves over binary fields to ECDSA
- new function EC_KEY_up_ref() in crypto/ec/ec_key.c
- reorganize crypto/ecdsa/ecdsatest.c
- add engine support for ECDH
- fix a few bugs in ECDSA engine support
Submitted by: Douglas Stebila <douglas.stebila@sun.com>
(the same keys can be used for ECC schemes other than ECDSA)
and add some new options.
Similarly, use string "EC PARAMETERS" instead of "ECDSA PARAMETERS"
in 'PEM' format.
Fix ec_asn1.c (take into account the desired conversion form).
'make update'.
Submitted by: Nils Larsch
See the commit log message for that for more information.
NB: X509_STORE_CTX's use of "ex_data" support was actually misimplemented
(initialisation by "memset" won't/can't/doesn't work). This fixes that but
requires that X509_STORE_CTX_init() be able to handle errors - so its
prototype has been changed to return 'int' rather than 'void'. All uses of
that function throughout the source code have been tracked down and
adjusted.
setting stack (actually, array) values in ex_data. So only increment the
global counters if the underlying CRYPTO_get_ex_new_index() call succeeds.
This change doesn't make "ex_data" right (see the comment at the head of
ex_data.c to know why), but at least makes the source code marginally less
frustrating.
Split private key PEM and normal PEM handling. Private key
handling needs to link in stuff like PKCS#8.
Relocate the ASN1 *_dup() functions, to the relevant ASN1
modules using new macro IMPLEMENT_ASN1_DUP_FUNCTION. Previously
these were all in crypto/x509/x_all.c along with every ASN1
BIO/fp function which linked in *every* ASN1 function if
a single dup was used.
Move the authority key id ASN1 structure to a separate file.
This is used in the X509 routines and its previous location
linked in all the v3 extension code.
Also move ASN1_tag2bit to avoid linking in a_bytes.c which
is now largely obsolete.
So far under Linux stripped binary with single PEM_read_X509
is now 238K compared to 380K before these changes.
applications to use EVP. Add missing calls to HMAC_cleanup() and
don't assume HMAC_CTX can be copied using memcpy().
Note: this is almost identical to the patch submitted to openssl-dev
by Verdon Walker <VWalker@novell.com> except some redundant
EVP_add_digest_()/EVP_cleanup() calls were removed and some changes
made to avoid compiler warnings.
Only use trust settings if either trust or reject settings
are present, otherwise use compatibility mode. This stops
root CAs being rejected if they have alias of keyid set.
