Adding support for these operations for the EdDSA implementations
makes pkeyutl usable for signing/verifying for these algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5880)
felem_neg does not produce an output within the tight bounds suitable
for felem_contract. This affects build configurations which set
enable-ec_nistp_64_gcc_128.
point_double and point_add, in the non-z*_is_zero cases, tolerate and
fix up the wider bounds, so this only affects point_add calls where the
other point is infinity. Thus it only affects the final addition in
arbitrary-point multiplication, giving the wrong y-coordinate. This is a
no-op for ECDH and ECDSA, which only use the x-coordinate of
arbitrary-point operations.
Note: ecp_nistp521.c has the same issue in that the documented
preconditions are violated by the test case. I have not addressed this
in this PR. ecp_nistp521.c does not immediately produce the wrong
answer; felem_contract there appears to be a bit more tolerant than its
documented preconditions. However, I haven't checked the point_add
property above holds. ecp_nistp521.c should either get this same fix, to
be conservative, or have the bounds analysis and comments reworked for
the wider bounds.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5779)
Some platforms, cough-DJGPP, fail to compile claiming that requested
alignment is greater than maximum possible. Supposedly original
alignment was result of an attempt to utilize AVX2...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5708)
In particular, x and y may be NULL, as used in ecdsa_ossl.c. Make use of
this in ecdh_ossl.c as well, to save an otherwise unnecessary temporary.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5532)
Without actually using EVP_PKEY_FLAG_AUTOARGLEN
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4793)
Unlike "upstream", Android NDK's arm64 gcc [but not clang] performs
64x64=128-bit multiplications with library calls, which appears to
have devastating impact on performance. [The condition is reduced to
__ANDROID__ [&& !__clang__], because x86_64 has corresponding
assembly module.]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5589)
Debugging asserts had implicit casts that triggered the warnings.
However, instead of making the casts explicit it's more appropriate
to perform checks that ensure that implicit casts were safe.
ec/curve448/scalar.c: size_t-fy scalar_decode_short.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5494)
This adds all of the relevant EVP plumbing required to make
X448 and Ed448 work.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/5481)
Why is it redundant? We're looking at carry from addition of small,
11-bit number to 256-bit one. And carry would mean only one thing,
resulting first limb being small number and remaing ones - zeros.
Hence adding 38 to first limb can't carry.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5476)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5449)
As it turns out gcc -pedantic doesn't seem to consider __uint128_t
as non-standard, unlike __int128 that is.
Fix even MSVC warnings in curve25519.c.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5449)
SPARC condition in __SIZEOF_INT128__==16 is rather performance thing
than portability. Even though compiler advertises int128 capability,
corresponding operations are inefficient, because they are not
directly backed by instruction set.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5449)
Currently it's limited to 64-bit platforms only as minimum radix
expected in assembly is 2^51.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5408)
3 least significant bits of the input scalar are explicitly cleared,
hence swap variable has fixed value [of zero] upon exit from the loop.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5408)
The original curve448 code was templated to allow for a 25519
implementation. We've just imported the 448 stuff - but a remnant of
the original templated approach remained. This just simplifies that.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
We removed various platform specific optimisation files in an earlier
commit. The vector code was related to that and therefore is no longer
required. It may be resurrected at a later point if we reintroduce the
opimtisations.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
Instead we should use the standard OpenSSL constant time routines.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
We already have a constant_time_select() function so, to avoid
confusion/clashing we shouldn't have a second one.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
Remove all architecture specific files except for the reference arch_32
version. These files provide archicture specific performance optimisation.
However they have not been integrated yet. In order to avoid review issues
they are removed for now. They may be reintroduced at a later time.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
Following running openssl-format-source there were a lot of manual tweaks
that were requried.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
Some files talk about the MIT license. This code was contributed under
CLA and was relicensed to the OpenSSL licence when imported.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
Unlike X448 the key lengths for ED448 are 57 bytes (as opposed to 56)
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
We have fully converted curve448 to use the OpenSSL shake256 implementation
so we can now remove the old one.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
Convert the curve448 test to use the OpenSSL implementation of shake256.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
Some non-portable includes are left because they are already suitably
guarded.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
OpenSSL does not currently have this concept. It only provides compiler
warnings so just remove it.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
Most of these were in point_448.h. While I was at it I spotted some unused
declarations, so I deleted those too.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
This imports selected files from the src directory of this repository:
https://sourceforge.net/p/ed448goldilocks/code/ci/v0.9.4/tree/
This is from the version tagged as "v0.9.4" with commit id 7527e9.
This code was originally writting by Mike Hamburg and the import is done by
kind permission of Rambus and Mike Hamburg under CLA. As this is under CLA
the files are being relicensed under the OpenSSL licence. Subsequent
commits will correct any licence notices in the individual files.
These files should provide complete self-contained support for X448 and
Ed448. They are imported "as is" from the source repository and this
commit does not attempt to integrate them into the OpenSSL build system,
or modify them in any way to fit OpenSSL style guidelines. That will be
done by subsequent commits.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5105)
The make variables LIB_CFLAGS, DSO_CFLAGS and so on were used in
addition to CFLAGS and so on. This works without problem on Unix and
Windows, where options with different purposes (such as -D and -I) can
appear anywhere on the command line and get accumulated as they come.
This is not necessarely so on VMS. For example, macros must all be
collected and given through one /DEFINE, and the same goes for
inclusion directories (/INCLUDE).
So, to harmonize all platforms, we repurpose make variables starting
with LIB_, DSO_ and BIN_ to be all encompassing variables that
collects the corresponding values from CFLAGS, CPPFLAGS, DEFINES,
INCLUDES and so on together with possible config target values
specific for libraries DSOs and programs, and use them instead of the
general ones everywhere.
This will, for example, allow VMS to use the exact same generators for
generated files that go through cpp as all other platforms, something
that has been impossible to do safely before now.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5357)
C preprocessor flags get separated from C flags, which has the
advantage that we don't get loads of macro definitions and inclusion
directory specs when linking shared libraries, DSOs and programs.
This is a step to add support for "make variables" when configuring.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5177)
SPARC ISA doesn't have provisions to back up 128-bit multiplications
and additions. And so multiplications are done with library calls
and carries with comparisons and conditional moves. As result base
2^51 code is >40% slower...
Reviewed-by: Tim Hudson <tjh@openssl.org>
This is based on RT#3810, which added dedicated modular inversion.
ECDSA verify results improves as well, but not as much.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5001)
Similar to commit 17b602802114d53017ff7894319498934a580b17(
"Remove extra `the` in SSL_SESSION_set1_id.pod"), this commit removes
typos where additional 'the' have been added.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4999)
"Double" is in quotes because improvement coefficient varies
significantly depending on platform and compiler. You're likely
to measure ~2x improvement on popular desktop and server processors,
but not so much on mobile ones, even minor regression on ARM
Cortex series. Latter is because they have rather "weak" umulh
instruction. On low-end x86_64 problem is that contemporary gcc
and clang tend to opt for double-precision shift for >>51, which
can be devastatingly slow on some processors.
Just in case for reference, trick is to use 2^51 radix [currently
only for DH].
Reviewed-by: Rich Salz <rsalz@openssl.org>
Expression '...' is always true.
The 'b->init' variable is assigned values twice successively
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4753)
EVP_PKEY_public_check() and EVP_PKEY_param_check()
Doc and test cases are added
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4647)
It's argued that /WX allows to keep better focus on new code, which
motivates its comeback...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)
Around 138 distinct errors found and fixed; thanks!
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)
information about the length of the scalar used in ECDSA operations
from a large number (2^32) of signatures.
This doesn't rate as a CVE because:
* For the non-constant time code, there are easier ways to extract
more information.
* For the constant time code, it requires a significant number of signatures
to leak a small amount of information.
Thanks to Neals Fournaise, Eliane Jaulmes and Jean-Rene Reinhard for
reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4576)
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
Names were not removed.
Some comments were updated.
Replace Andy's address with openssl.org
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4516)
This change adds a comment to the exceptional case in point_add that
handles the case of a doubling, which explains when this case may occur
during normal processing.
Thanks go to Antonio Sanso for noting this.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4424)
Change argument type of xxxelem_is_zero_int to const void*
to avoid the need of type casts.
Fixes#4413
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4450)
A new method is added to EVP_PKEY_METH as:
int (*check) (EVP_PKEY_CTX *ctx);
and to EVP_PKEY_ASN1_METHOD as:
int (*pkey_check) (EVP_PKEY_CTX *ctx);
This is used to check the validity of a specific key.
The order of calls is:
EVP_PKEY_check -> pmeth.check -> ameth.pkey_check.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4337)
Removed e_os.h from all bar three headers (apps/apps.h crypto/bio/bio_lcl.h and
ssl/ssl_locl.h).
Added e_os.h into the files that need it now.
Directly reference internal/nelem.h when required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
Add a new global DRBG for private keys used by RAND_priv_bytes.
Add BN_priv_rand() and BN_priv_rand_range() which use RAND_priv_bytes().
Change callers to use the appropriate BN_priv... function.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4076)
If RAND_add wraps around, XOR with existing. Add test to drbgtest that
does the wrap-around.
Re-order seeding and stop after first success.
Add RAND_poll_ex()
Use the DF and therefore lower RANDOMNESS_NEEDED. Also, for child DRBG's,
mix in the address as the personalization bits.
Centralize the entropy callbacks, from drbg_lib to rand_lib.
(Conceptually, entropy is part of the enclosing application.)
Thanks to Dr. Matthias St Pierre for the suggestion.
Various code cleanups:
-Make state an enum; inline RANDerr calls.
-Add RAND_POLL_RETRIES (thanks Pauli for the idea)
-Remove most RAND_seed calls from rest of library
-Rename DRBG_CTX to RAND_DRBG, etc.
-Move some code from drbg_lib to drbg_rand; drbg_lib is now only the
implementation of NIST DRBG.
-Remove blocklength
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4019)
Changes the EC_KEY_METHOD_get_* family to not need a EC_KEY_METHOD* as
its first parameter, but a const EC_KEY_METHOD*, which is entirely
sufficient.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #3985
Remove some incorrect copyright references.
Move copyright to standard place
Add OpenSSL copyright where missing.
Remove copyrighted file that we don't use any more
Remove Itanium assembler for RC4 and MD5 (assembler versions of old and
weak algorithms for an old chip)
Standardize apps/rehash copyright comment; approved by Timo
Put dual-copyright notice on mkcert
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3691)
To make it consistent in the code base
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3749)
Run perltidy on util/mkerr
Change some mkerr flags, write some doc comments
Make generated tables "const" when genearting lib-internal ones.
Add "state" file for mkerr
Renerate error tables and headers
Rationalize declaration of ERR_load_XXX_strings
Fix out-of-tree build
Add -static; sort flags/vars for options.
Also tweak code output
Moved engines/afalg to engines (from master)
Use -static flag
Standard engine #include's of errors
Don't linewrap err string tables unless necessary
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3392)
Fix undefined behaviour in curve25519.c. Prior to this running with
ubsan produces errors like this:
crypto/ec/curve25519.c:3871:18: runtime error: left shift of negative
value -22867
[extended tests]
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3600)
Since ED25519 doesn't have an associated digest it needs custom sign/verify
routines to handle ASN.1 signatures.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3503)
