Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy. Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove dependency on ssl_locl.h from v3_scts.c, and incidentally fix a build problem with
kerberos (the dependency meant v3_scts.c was trying to include krb5.h, but without having been
passed the relevanant -I flags to the compiler)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
After the finale, the "real" final part. :) Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Don't check for NULL before calling free functions. This gets:
ERR_STATE_free
ENGINE_free
DSO_free
CMAC_CTX_free
COMP_CTX_free
CONF_free
NCONF_free NCONF_free_data _CONF_free_data
A sk_free use within OBJ_sigid_free
TS_TST_INFO_free (rest of TS_ API was okay)
Doc update for UI_free (all uses were fine)
X509V3_conf_free
X509V3_section_free
X509V3_string_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
This gets BN_.*free:
BN_BLINDING_free BN_CTX_free BN_FLG_FREE BN_GENCB_free
BN_MONT_CTX_free BN_RECP_CTX_free BN_clear_free BN_free BUF_MEM_free
Also fix a call to DSA_SIG_free to ccgost engine and remove some #ifdef'd
dead code in engines/e_ubsec.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The problem occurs in EVP_PKEY_sign() when using RSA with X931 padding.
It is only triggered if the RSA key size is smaller than the digest length.
So with SHA512 you can trigger the overflow with anything less than an RSA
512 bit key. I managed to trigger a 62 byte overflow when using a 16 bit RSA
key. This wasn't sufficient to cause a crash, although your mileage may
vary.
In practice RSA keys of this length are never used and X931 padding is very
rare. Even if someone did use an excessively short RSA key, the chances of
them combining that with a longer digest and X931 padding is very
small. For these reasons I do not believe there is a security implication to
this. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add a sanity check to the print_bin function to ensure that the |off|
argument is positive. Thanks to Kevin Wojtysiak (Int3 Solutions) and
Paramjot Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The static function dynamically allocates an output buffer if the output
grows larger than the static buffer that is normally used. The original
logic implied that |currlen| could be greater than |maxlen| which is
incorrect (and if so would cause a buffer overrun). Also the original
logic would call OPENSSL_malloc to create a dynamic buffer equal to the
size of the static buffer, and then immediately call OPENSSL_realloc to
make it bigger, rather than just creating a buffer than was big enough in
the first place. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot
Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
There was already a sanity check to ensure the passed buffer length is not
zero. Extend this to ensure that it also not negative. Thanks to Kevin
Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3 Solutions) for
reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The various implementations of EVP_CTRL_AEAD_TLS_AAD expect a buffer of at
least 13 bytes long. Add sanity checks to ensure that the length is at
least that. Also add a new constant (EVP_AEAD_TLS1_AAD_LEN) to evp.h to
represent this length. Thanks to Kevin Wojtysiak (Int3 Solutions) and
Paramjot Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add a sanity check to DES_enc_write to ensure the buffer length provided
is not negative. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot
Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add OPENSSL_clear_free which merges cleanse and free.
(Names was picked to be similar to BN_clear_free, etc.)
Removed OPENSSL_freeFunc macro.
Fixed the small simple ones that are left:
CRYPTO_free CRYPTO_free_locked OPENSSL_free_locked
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't check for NULL before calling a free routine. This gets X509_.*free:
x509_name_ex_free X509_policy_tree_free X509_VERIFY_PARAM_free
X509_STORE_free X509_STORE_CTX_free X509_PKEY_free
X509_OBJECT_free_contents X509_LOOKUP_free X509_INFO_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
Do not check for NULL before calling a free routine. This addresses:
ASN1_BIT_STRING_free ASN1_GENERALIZEDTIME_free ASN1_INTEGER_free
ASN1_OBJECT_free ASN1_OCTET_STRING_free ASN1_PCTX_free ASN1_SCTX_free
ASN1_STRING_clear_free ASN1_STRING_free ASN1_TYPE_free
ASN1_UTCTIME_free M_ASN1_free_of
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove ERR_[gs]et_implementation as they were not undocumented and
useless (the data structure was opaque).
Halve the number of lock/unlock calls in almost all ERR_
functions by letting the caller of get_hash or int_thread_set
able to lock. Very useful when looping, such as adding errors,
or when getting the hash and immediately doing a lookup on it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt. Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that. There have been many other changes and code-cleanup, see
bullet list below.
Special thanks to Matt for the long and detailed code review.
TEMPORARY:
For now, comment out CRYPTO_mem_leaks() at end of main
Tickets closed:
RT3515: Use 3DES in pkcs12 if built with no-rc2
RT1766: s_client -reconnect and -starttls broke
RT2932: Catch write errors
RT2604: port should be 'unsigned short'
RT2983: total_bytes undeclared #ifdef RENEG
RT1523: Add -nocert to fix output in x509 app
RT3508: Remove unused variable introduced by b09eb24
RT3511: doc fix; req default serial is random
RT1325,2973: Add more extensions to c_rehash
RT2119,3407: Updated to dgst.pod
RT2379: Additional typo fix
RT2693: Extra include of string.h
RT2880: HFS is case-insensitive filenames
RT3246: req command prints version number wrong
Other changes; incompatibilities marked with *:
Add SCSV support
Add -misalign to speed command
Make dhparam, dsaparam, ecparam, x509 output C in proper style
Make some internal ocsp.c functions void
Only display cert usages with -help in verify
Use global bio_err, remove "BIO*err" parameter from functions
For filenames, - always means stdin (or stdout as appropriate)
Add aliases for -des/aes "wrap" ciphers.
*Remove support for IISSGC (server gated crypto)
*The undocumented OCSP -header flag is now "-header name=value"
*Documented the OCSP -header flag
Reviewed-by: Matt Caswell <matt@openssl.org>
The function CRYPTO_strdup (aka OPENSSL_strdup) fails to check the return
value from CRYPTO_malloc to see if it is NULL before attempting to use it.
This patch adds a NULL check.
RT3786
Signed-off-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 37b0cf936744d9edb99b5dd82cae78a7eac6ad60)
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 20d21389c8b6f5b754573ffb6a4dc4f3986f2ca4)
This addresses
- request for improvement for faster key setup in RT#3576;
- clearing registers and stack in RT#3554 (this is more of a gesture to
see if there will be some traction from compiler side);
- more commentary around input parameters handling and stack layout
(desired when RT#3553 was reviewed);
- minor size and single block performance optimization (was lying around);
Reviewed-by: Matt Caswell <matt@openssl.org>
Fix bug where i2c_ASN1_INTEGER mishandles zero if it is marked as
negative.
Thanks to Huzaifa Sidhpurwala <huzaifas@redhat.com> and
Hanno Böck <hanno@hboeck.de> for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It should have freed them when != NULL, not when == NULL.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Viktor Dukhovni <openssl-users@dukhovni.org>
While *pval is usually a pointer in rare circumstances it can be a long
value. One some platforms (e.g. WIN64) where
sizeof(long) < sizeof(ASN1_VALUE *) this will write past the field.
*pval is initialised correctly in the rest of ASN1_item_ex_new so setting it
to NULL is unecessary anyway.
Thanks to Julien Kauffmann for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The macros BSWAP4 and BSWAP8 have statetemnt expressions
implementations that use local variable names that shadow variables
outside the macro call, generating warnings like this
e_aes_cbc_hmac_sha1.c:263:14: warning: declaration shadows a local variable
[-Wshadow]
seqnum = BSWAP8(blocks[0].q[0]);
^
../modes/modes_lcl.h:41:29: note: expanded from macro 'BSWAP8'
^
e_aes_cbc_hmac_sha1.c:223:12: note: previous declaration is here
size_t ret = 0;
^
Have clang be quiet by modifying the macro variable names slightly
(suffixing them with an underscore).
Reviewed-by: Rich Salz <rsalz@openssl.org>
ebcdic.c:284:7: warning: ISO C requires a translation unit to contain at least one
declaration [-Wempty-translation-unit]
^
1 warning generated.
Reviewed-by: Rich Salz <rsalz@openssl.org>
ARM has optimized Cortex-A5x pipeline to favour pairs of complementary
AES instructions. While modified code improves performance of post-r0p0
Cortex-A53 performance by >40% (for CBC decrypt and CTR), it hurts
original r0p0. We favour later revisions, because one can't prevent
future from coming. Improvement on post-r0p0 Cortex-A57 exceeds 50%,
while new code is not slower on r0p0, or Apple A7 for that matter.
[Update even SHA results for latest Cortex-A53.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
This engine is for VMS only, and isn't really part of the core OpenSSL
but rather a side project of its own that just happens to have tagged
along for a long time. The reasons why it has remained within the
OpenSSL source are long lost in history, and there not being any real
reason for it to remain here, it's time for it to move out.
This side project will appear as a project in its own right, the
location of which will be announced later on.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Rewrite ASN1_TYPE_set_int_octetstring and ASN1_TYPE_get_int_octetstring
to use the new ASN.1 code instead of the old macros.
Reviewed-by: Rich Salz <rsalz@openssl.org>
With no more symlinks, there's no need for those variables, or the links
target. This also goes for all install: and uninstall: targets that do
nothing but copy $(EXHEADER) files, since that's now taken care of by the
top Makefile.
Also, removed METHTEST from test/Makefile. It looks like an old test that's
forgotten...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rather than making include/openssl/foo.h a symlink to
crypto/foo/foo.h, this change moves the file to include/openssl/foo.h
once and for all.
Likewise, move crypto/foo/footest.c to test/footest.c, instead of
symlinking it there.
Originally-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
RFC5915 requires the use of the I2OSP primitive as defined in RFC3447
for storing an EC Private Key. This converts the private key into an
OCTETSTRING and retains any leading zeros. This commit ensures that those
leading zeros are present if required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Update code to use ASN1_TYPE_pack_sequence and ASN1_TYPE_unpack_sequence
instead of performing the same operation manually.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add new functions ASN1_TYPE_pack_sequence and ASN1_TYPE_unpack_sequence:
these encode and decode ASN.1 SEQUENCE using an ASN1_TYPE structure.
Update ordinals.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The FAQ says this:
After the release of OpenSSL 1.0.0 the versioning scheme changed. Letter
releases (e.g. 1.0.1a) can only contain bug and security fixes and no
new features. Minor releases change the last number (e.g. 1.0.2) and
can contain new features that retain binary compatibility. Changes to
the middle number are considered major releases and neither source nor
binary compatibility is guaranteed.
With such a scheme (and with the thinking that it's nice if the shared
library version stays on track with the OpenSSL version), it's rather
futile to keep the minor release number in the shared library version.
The deed already done with OpenSSL 1.0.x can't be changed, but with
1.x.y, x=1 and on, 1.x as shared library version is sufficient.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Remove partially implemented d2i_X509_PKEY and i2d_X509_PKEY: nothing
uses them and they don't work properly. Update ordinals.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
EVP_.*free; this gets:
EVP_CIPHER_CTX_free EVP_PKEY_CTX_free EVP_PKEY_asn1_free
EVP_PKEY_asn1_set_free EVP_PKEY_free EVP_PKEY_free_it
EVP_PKEY_meth_free; and also EVP_CIPHER_CTX_cleanup
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Remove the combine option. This was used for compatibility with some
non standard behaviour in ancient versions of OpenSSL: specifically
the X509_ATTRIBUTE and DSAPublicKey handling. Since these have now
been revised it is no longer needed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
DSA public keys could exist in two forms: a single Integer type or a
SEQUENCE containing the parameters and public key with a field called
"write_params" deciding which form to use. These forms are non standard
and were only used by functions containing "DSAPublicKey" in the name.
Simplify code to only use the parameter form and encode the public key
component directly in the DSA public key method.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The X509_ATTRIBUTE structure includes a hack to tolerate malformed
attributes that encode as the type instead of SET OF type. This form
is never created by OpenSSL and shouldn't be needed any more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The justification for RAND_pseudo_bytes is somewhat dubious, and the reality
is that it is frequently being misused. RAND_bytes and RAND_pseudo_bytes in
the default implementation both end up calling ssleay_rand_bytes. Both may
return -1 in an error condition. If there is insufficient entropy then
both will return 0, but RAND_bytes will additionally add an error to the
error queue. They both return 1 on success.
Therefore the fundamental difference between the two is that one will add an
error to the error queue with insufficient entory whilst the other will not.
Frequently there are constructions of this form:
if(RAND_pseudo_bytes(...) <= 1)
goto err;
In the above form insufficient entropy is treated as an error anyway, so
RAND_bytes is probably the better form to use.
This form is also seen:
if(!RAND_pseudo_bytes(...))
goto err;
This is technically not correct at all since a -1 return value is
incorrectly handled - but this form will also treat insufficient entropy as
an error.
Within libssl it is required that you have correctly seeded your entropy
pool and so there seems little benefit in using RAND_pseudo_bytes.
Similarly in libcrypto many operations also require a correctly seeded
entropy pool and so in most interesting cases you would be better off
using RAND_bytes anyway. There is a significant risk of RAND_pseudo_bytes
being incorrectly used in scenarios where security can be compromised by
insufficient entropy.
If you are not using the default implementation, then most engines use the
same function to implement RAND_bytes and RAND_pseudo_bytes in any case.
Given its misuse, limited benefit, and potential to compromise security,
RAND_pseudo_bytes has been deprecated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets DH_free, DSA_free, RSA_free
Reviewed-by: Matt Caswell <matt@openssl.org>
Disable loop checking when we retry verification with an alternative path.
This fixes the case where an intermediate CA is explicitly trusted and part
of the untrusted certificate list. By disabling loop checking for this case
the untrusted CA can be replaced by the explicitly trusted case and
verification will succeed.
Reviewed-by: Matt Caswell <matt@openssl.org>
If a set of certificates is supplied to OCSP_basic_verify use those in
addition to any present in the OCSP response as untrusted CAs when
verifying a certificate chain.
PR#3668
Reviewed-by: Matt Caswell <matt@openssl.org>
Move ASN.1 internals used across multiple directories into new internal
header file asn1_int.h remove crypto/Makefile hack which allowed other
directories to include "asn1_locl.h"
Reviewed-by: Matt Caswell <matt@openssl.org>
Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets ASN1_OBJECT_free and ASN1_STRING_free.
Reviewed-by: Matt Caswell <matt@openssl.org>
Fix compilation failure when SCTP is compiled due to incorrect define.
Reported-by: Conrad Kostecki <ck+gentoobugzilla@bl4ckb0x.de>
URL: https://bugs.gentoo.org/543828
RT#3758
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Thanks to a -I.., the path does work, at least on unix. However, this
doesn't work so well on VMS. Correcting the path to not rely on given
-I does work on both.
Reviewed-by: Matt Caswell <matt@openssl.org>
Remove old ASN.1 COMPAT type. This was meant as a temporary measure
so older ASN.1 code (from OpenSSL 0.9.6) still worked. It's a hack
which breaks constification and hopefully nothing uses it now, if
it ever did.
Reviewed-by: Matt Caswell <matt@openssl.org>
Remove old M_ASN1_ macros and replace any occurences with the corresponding
function.
Remove d2i_ASN1_bytes, d2i_ASN1_SET, i2d_ASN1_SET: no longer used internally.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This tests the unwrap algorithm with an invalid key. The result should
be rejected without returning any plaintext.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
crypto/modes/wrap128.c was heavily refactored to support AES Key Wrap
with Padding, and four bugs were introduced into CRYPTO_128_unwrap() at
that time:
- crypto_128_unwrap_raw()'s return value ('ret') is checked incorrectly,
and the function immediately returns 'ret' in (almost) all cases.
This makes the IV checking code later in the function unreachable, but
callers think the IV check succeeded since CRYPTO_128_unwrap()'s
return value is non-zero.
FIX: Return 0 (error) if crypto_128_unwrap_raw() returned 0 (error).
- crypto_128_unwrap_raw() writes the IV to the 'got_iv' buffer, not to
the first 8 bytes of the output buffer ('out') as the IV checking code
expects. This makes the IV check fail.
FIX: Compare 'iv' to 'got_iv', not 'out'.
- The data written to the output buffer ('out') is "cleansed" if the IV
check fails, but the code passes OPENSSL_cleanse() the input buffer
length ('inlen') instead of the number of bytes that
crypto_128_unwrap_raw() wrote to the output buffer ('ret'). This
means that OPENSSL_cleanse() could potentially write past the end of
'out'.
FIX: Change 'inlen' to 'ret' in the OPENSSL_cleanse() call.
- CRYPTO_128_unwrap() is returning the length of the input buffer
('inlen') instead of the number of bytes written to the output buffer
('ret'). This could cause the caller to read past the end of 'out'.
FIX: Return 'ret' instead of 'inlen' at the end of the function.
PR#3749
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
In PKCS#7, the ASN.1 content component is optional.
This typically applies to inner content (detached signatures),
however we must also handle unexpected missing outer content
correctly.
This patch only addresses functions reachable from parsing,
decryption and verification, and functions otherwise associated
with reading potentially untrusted data.
Correcting all low-level API calls requires further work.
CVE-2015-0289
Thanks to Michal Zalewski (Google) for reporting this issue.
Reviewed-by: Steve Henson <steve@openssl.org>
Fix segmentation violation when ASN1_TYPE_cmp is passed a boolean type. This
can be triggered during certificate verification so could be a DoS attack
against a client or a server enabling client authentication.
CVE-2015-0286
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix a bug where invalid PSS parameters are not rejected resulting in a
NULL pointer exception. This can be triggered during certificate
verification so could be a DoS attack against a client or a server
enabling client authentication.
Thanks to Brian Carpenter for reporting this issues.
CVE-2015-0208
Reviewed-by: Tim Hudson <tjh@openssl.org>
In the probable_prime() function we behave slightly different if the number
of bits we are interested in is <= BN_BITS2 (the num of bits in a BN_ULONG).
As part of the calculation we work out a size_limit as follows:
size_limit = (((BN_ULONG)1) << bits) - BN_get_word(rnd) - 1;
There is a problem though if bits == BN_BITS2. Shifting by that much causes
undefined behaviour. I did some tests. On my system BN_BITS2 == 64. So I
set bits to 64 and calculated the result of:
(((BN_ULONG)1) << bits)
I was expecting to get the result 0. I actually got 1! Strangely this...
(((BN_ULONG)0) << BN_BITS2)
...does equal 0! This means that, on my system at least, size_limit will be
off by 1 when bits == BN_BITS2.
This commit fixes the behaviour so that we always get consistent results.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The function CRYPTO_128_unwrap_pad uses an 8 byte AIV (Alternative Initial
Value). The least significant 4 bytes of this is placed into the local
variable |ptext_len|. This is done as follows:
ptext_len = (aiv[4] << 24) | (aiv[5] << 16) | (aiv[6] << 8) | aiv[7];
aiv[4] is an unsigned char, but (aiv[4] << 24) is promoted to a *signed*
int - therefore we could end up shifting into the sign bit and end up with
a negative value. |ptext_len| is a size_t (typically 64-bits). If the
result of the shifts is negative then the upper bits of |ptext_len| will
all be 1.
This commit fixes the issue by explicitly casting to an unsigned int.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function sk_zero is supposed to zero the elements held within a stack.
It uses memset to do this. However it calculates the size of each element
as being sizeof(char **) instead of sizeof(char *). This probably doesn't
make much practical difference in most cases, but isn't a portable
assumption.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Previously, ASN1_UTCTIME_cmp_time_t would return 1 if s > t, -1 if
s < t, and 0 if s == t.
This behavior was broken in a refactor [0], resulting in the opposite
time comparison behavior.
[0]: 904348a492
PR#3706
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Td4 and Te4 are arrays of u8. A u8 << int promotes the u8 to an int first then shifts.
If the mathematical result of a shift (as modelled by lhs * 2^{rhs}) is not representable
in an integer, behaviour is undefined. In other words, you can't shift into the sign bit
of a signed integer. Fix this by casting to u32 whenever we're shifting left by 24.
(For consistency, cast other shifts, too.)
Caught by -fsanitize=shift
Submitted by Nick Lewycky (Google)
Reviewed-by: Andy Polyakov <appro@openssl.org>
According to RFC 5649 section 4.1 step 1) we should not add padding
if plaintext length is multiply of 8 ockets.
This matches pseudo-code in http://dx.doi.org/10.6028/NIST.SP.800-38F
on page 15, section 6.3 KWP, algorithm 5 KWP-AE, step 2.
PR#3675
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Remove DECLARE_ASN1_SET_OF and DECLARE_PKCS12_STACK_OF these haven't been
used internally in OpenSSL for some time.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When printing out an ASN.1 structure if the type is an item template don't
fall thru and attempt to interpret as a primitive type.
Reviewed-by: Andy Polyakov <appro@openssl.org>
In the RSA_X931_derive_ex a call to BN_CTX_new is made. This can return
NULL on error. However the return value is not tested until *after* it is
derefed! Also at the top of the function a test is made to ensure that
|rsa| is not NULL. If it is we go to the "err" label. Unfortunately the
error handling code deref's rsa.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The call to asn1_do_adb can return NULL on error, so we should check the
return value before attempting to use it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
ASN1_primitive_new takes an ASN1_ITEM * param |it|. There are a couple
of conditional code paths that check whether |it| is NULL or not - but
later |it| is deref'd unconditionally. If |it| was ever really NULL then
this would seg fault. In practice ASN1_primitive_new is marked as an
internal function in the public header file. The only places it is ever
used internally always pass a non NULL parameter for |it|. Therefore, change
the code to sanity check that |it| is not NULL, and remove the conditional
checking.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Calling EVP_DigestInit_ex which has already had the digest set up for it
should be possible. You are supposed to be able to pass NULL for the type.
However currently this seg faults.
Reviewed-by: Andy Polyakov <appro@openssl.org>
In the event of an error |rr| could be NULL. Therefore don't assume you can
use |rr| in the error handling code.
Reviewed-by: Andy Polyakov <appro@openssl.org>
BIO_debug_callback() no longer assumes the hexadecimal representation of
a pointer fits in 8 characters.
Signed-off-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
New function ASN1_STRING_clear_free which cleanses an ASN1_STRING
structure before freeing it.
Call ASN1_STRING_clear_free on PKCS#8 private key components.
Reviewed-by: Rich Salz <rsalz@openssl.org>
crypto/crypto-lib.com - catch up with the OCSP changes
test/maketest.com and test/tests.com - catch up with the addition of test_evp_extra
Reviewed-by: Rich Salz <rsalz@openssl.org>
Miscellaneous unchecked malloc fixes. Also fixed some mem leaks on error
paths as I spotted them along the way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The format script didn't correctly recognise some ASN.1 macros and
didn't reformat some files as a result. Fix script and reformat
affected files.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Add support for skipping disabled algorithms: if an attempt to load a
public or private key results in an unknown algorithm error then any
test using that key is automatically skipped.
Reviewed-by: Tim Hudson <tjh@openssl.org>
When OpenSSL is configured with no-ec, then the new evp_extra_test fails to
pass. This change adds appropriate OPENSSL_NO_EC guards around the code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
valid. However the issuer of the leaf, or some intermediate cert is in fact
in the trust store.
When building a trust chain if the first attempt fails, then try to see if
alternate chains could be constructed that are trusted.
RT3637
RT3621
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Though this doesn't mean that masm becomes supported, the script is
still provided on don't-ask-in-case-of-doubt-use-nasm basis.
See RT#3650 for background.
Reviewed-by: Matt Caswell <matt@openssl.org>
The rationale for this move is that TERMIOS is default, supported by
POSIX-1.2001, and most definitely on Linux. For a few other systems,
TERMIO may still be the termnial interface of preference, so we keep
-DTERMIO on those in Configure.
crypto/ui/ui_openssl.c is simplified in this regard, and will define
TERMIOS for all systems except a select few exceptions.
Reviewed-by: Matt Caswell <matt@openssl.org>
Many applications require named curve parameter encoding instead of explicit
parameter encoding (including the TLS library in OpenSSL itself). Set this
encoding by default instead of requiring an explicit call to set it.
Add OPENSSL_EC_EXPLICT_CURVE define.
Reviewed-by: Matt Caswell <matt@openssl.org>
Add two new keywords "PublicKey" and "PrivateKey". These will load a key
in PEM format from the lines immediately following the keyword and assign
it a name according to the value. These will be used later for public and
private key testing operations.
Add tests for Sign, Verify, VerifyRecover and Decrypt.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Specifically, an ASN.1 NumericString in the certificate CN will fail UTF-8 conversion
and result in a negative return value, which the "x509 -checkhost" command-line option
incorrectly interpreted as success.
Also update X509_check_host docs to reflect reality.
Thanks to Sean Burford (Google) for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Free up bio_err after memory leak data has been printed to it.
In int_free_ex_data if ex_data is NULL there is nothing to free up
so return immediately and don't reallocate it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The mkstack.pl script now generates the entire safestack.h file.
It generates output that follows the coding style.
Also, removed all instances of the obsolete IMPLEMENT_STACK_OF
macro.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Disabling HMAC doesn't work. If it did it would end up disabling a lot of
OpenSSL functionality (it is required for all versions of TLS for example).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Includes VMS fixes from Richard.
Includes Kurt's destest fixes (RT 1290).
Closes tickets 1290 and 1291
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Keep one #if 0 but rename the symbol to be more descriptive of what
it's doing (you can disable support for old broken Netscape software).
Reviewed-by: Tim Hudson <tjh@openssl.org>
Mostly, but not completely, debugging print statements.
Some old logic kept for internal documentation reasons, perhaps.
Reviewed-by: Richard Levitte <levitte@openssl.org>
on affected platforms (PowerPC and AArch64).
For reference, minimalistic #ifdef GHASH is sufficient, because
it's never defined with OPENSSL_SMALL_FOOTPRINT and ctx->ghash
is never referred.
Reviewed-by: Rich Salz <rsalz@openssl.org>
crypto/crypto-lib.com:
Remove all APPS building, as they are gone.
Depend on the variable SDIRS that's defined by makevms.com.
Remake the whole partial module list mechanism to check for variables with a counter.
Define the logical name INTERNAL to allow for '#include "internal/foo.h"'.
makevms.com:
Define SDIRS, to allow for removal of crypto modules and pass that information to crypto/crypto-lib.com.
Allow for experimental modules.
Update the allowed things to disable.
Update the things disabled by default to match Configure.
Update headers to be copied.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add new symbols that are longer than 31 chars to symhacks.
VMS doesn't have <sys/un.h>, reflect that in e_os.h.
MS_CALLBACK has been removed, ssl_task.c needs adjustment.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Remove OPENSSL_NO_BUF_FREELISTS. This was turned on by default,
so the work here is removing the 'maintain our own freelist' code.
Also removed a minor old Windows-multibyte/widechar conversion flag.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Remove support for SHA0 and DSS0 (they were broken), and remove
the ability to attempt to build without SHA (it didn't work).
For simplicity, remove the option of not building various SHA algorithms;
you could argue that SHA_224/256/384/512 should be kept, since they're
like crypto algorithms, but I decided to go the other way.
So these options are gone:
GENUINE_DSA OPENSSL_NO_SHA0
OPENSSL_NO_SHA OPENSSL_NO_SHA1
OPENSSL_NO_SHA224 OPENSSL_NO_SHA256
OPENSSL_NO_SHA384 OPENSSL_NO_SHA512
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove OPENSSL_NO_RFCF3779.
Also, makevms.com was ignored by some of the other cleanups, so
I caught it up. Sorry I ignored you, poor little VMS...
Reviewed-by: Richard Levitte <levitte@openssl.org>
The following compile options (#ifdef's) are removed:
OPENSSL_NO_BIO OPENSSL_NO_BUFFER OPENSSL_NO_CHAIN_VERIFY
OPENSSL_NO_EVP OPENSSL_NO_FIPS_ERR OPENSSL_NO_HASH_COMP
OPENSSL_NO_LHASH OPENSSL_NO_OBJECT OPENSSL_NO_SPEED OPENSSL_NO_STACK
OPENSSL_NO_X509 OPENSSL_NO_X509_VERIFY
This diff is big because of updating the indents on preprocessor lines.
Reviewed-by: Richard Levitte <levitte@openssl.org>
pre-processor controls cleanup. It doesn't mean that it no longer
works on UltraSPARC, only that it doesn't utilize sparcv9-specific
features like branch prediction hints and load in little-endian byte
order anymore. This "costs" ~3% in EDE3 performance regression on
UltraSPARC.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Per discussion: should not exit. Should not print to stderr.
Errors are ignored. Updated doc to reflect that, and the fact
that this function is to be avoided.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This removes all code surrounded by '#ifdef undef'
One case is left: memmove() replaced by open-coded for loop,
in crypto/stack/stack.c That needs further review.
Also removed a couple of instances of /* dead code */ if I saw them
while doing the main removal.
Reviewed-by: Matt Caswell <matt@openssl.org>
If you examine changes, you are likely to wonder "but what about ILP64,
elusive as they are, don't they fall victim to 16-bit rationalization?"
No, the case was modeled and verified to work.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
Remove MS_STATIC; it's a relic from platforms <32 bits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Use setbuf(fp, NULL) instead of setvbuf(). This removes some
ifdef complexity because all of our platforms support setbuf.
Reviewed-by: Richard Levitte <levitte@openssl.org>
