The intention of the removed code was to check if the previous operation
carried. However this does not work. The "mask" value always ends up being
a constant and is all ones - thus it has no effect. This check is no longer
required because of the previous commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3832)
In TLS mode of operation the padding value "pad" is obtained along with the
maximum possible padding value "maxpad". If pad > maxpad then the data is
invalid. However we must continue anyway because this is constant time code.
We calculate the payload length like this:
inp_len = len - (SHA_DIGEST_LENGTH + pad + 1);
However if pad is invalid then inp_len ends up -ve (actually large +ve
because it is a size_t).
Later we do this:
/* verify HMAC */
out += inp_len;
len -= inp_len;
This ends up with "out" pointing before the buffer which is undefined
behaviour. Next we calculate "p" like this:
unsigned char *p =
out + len - 1 - maxpad - SHA256_DIGEST_LENGTH;
Because of the "out + len" term the -ve inp_len value is cancelled out
so "p" points to valid memory (although technically the pointer arithmetic
is undefined behaviour again).
We only ever then dereference "p" and never "out" directly so there is
never an invalid read based on the bad pointer - so there is no security
issue.
This commit fixes the undefined behaviour by ensuring we use maxpad in
place of pad, if the supplied pad is invalid.
With thanks to Brian Carpenter for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3832)
Bounds checking strpy, strcat and sprintf.
These are the remaining easy ones to cover a recently removed commit.
Some are trivial, some have been modified and a couple left as they are because the reverted change didn't bounds check properly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3871)
- in EVP_read_pw_string_min(), the return value from UI_add_* wasn't
properly checked
- in UI_process(), |state| was never made NULL, which means an error
when closing the session wouldn't be accurately reported.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3849)
[extended tests]
Original text:
Use BUF_strlcpy() instead of strcpy().
Use BUF_strlcat() instead of strcat().
Use BIO_snprintf() instead of sprintf().
In some cases, keep better track of buffer lengths.
This is part of a large change submitted by Markus Friedl <markus@openbsd.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3701)
Instead, make it possible to disable the console reader that's part of
the UI module. This makes it possible to use the UI API and other UI
methods in environments where the console reader isn't useful.
To disable the console reader, configure with 'no-ui-console' /
'disable-ui-console'.
'no-ui' / 'disable-ui' is now an alias for 'no-ui-console' /
'disable-ui-console'.
Fixes#3806
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3820)
Run perltidy on util/mkerr
Change some mkerr flags, write some doc comments
Make generated tables "const" when genearting lib-internal ones.
Add "state" file for mkerr
Renerate error tables and headers
Rationalize declaration of ERR_load_XXX_strings
Fix out-of-tree build
Add -static; sort flags/vars for options.
Also tweak code output
Moved engines/afalg to engines (from master)
Use -static flag
Standard engine #include's of errors
Don't linewrap err string tables unless necessary
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3392)
- Mostly missing fall thru comments
- And uninitialized value used in sslapitest.c
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3440)
Add "single part" digest sign and verify functions. These sign and verify
a message in one function. This simplifies some operations and it will later
be used as the API for algorithms which do not support the update/final
mechanism (e.g. PureEdDSA).
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3409)
This commit contains some optimizations in PKCS5_PBKDF2_HMAC() and
HMAC_CTX_copy() functions which together makes PBKDF2 computations
faster by 15-40% according to my measurements made on x64 Linux with
both asm optimized and no-asm versions of SHA1, SHA256 and SHA512.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1708)
The documentation of this function states that the password parameter
can be NULL. However, the implementation returns an error in this case
due to the inner workings of the HMAC_Init_ex() function.
With this change, NULL password will be treated as an empty string and
PKCS5_PBKDF2_HMAC() no longer fails on this input.
I have also added two new test cases that tests the handling of the
special values NULL and -1 of the password and passlen parameters,
respectively.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1692)
This removes the fips configure option. This option is broken as the
required FIPS code is not available.
FIPS_mode() and FIPS_mode_set() are retained for compatibility, but
FIPS_mode() always returns 0, and FIPS_mode_set() can only be used to
turn FIPS mode off.
Reviewed-by: Stephen Henson <steve@openssl.org>
This implementation is written in endian agnostic C code. No attempt
at providing machine specific assembly code has been made. This
implementation expands the evptests by including the test cases from
RFC 5794 and ARIA official site rather than providing an individual
test case. Support for ARIA has been integrated into the command line
applications, but not TLS. Implemented modes are CBC, CFB1, CFB8,
CFB128, CTR, ECB and OFB128.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2337)
Fix a typo. Probably this has not been found because EVP_CIPHER_CTX is
smaller than EVP_CHACHA_AEAD_CTX and heap overflow does not occur.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2294)
EVP_CIPH_FLAG_LENGTH_BITS flag for CFB1 has been broken with the
introduction of the is_partially_overlapping() check that did not take
it into the account (treating number of bits passed as bytes). This
remedies that and allows this flag to work as intended.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1942)
or EVP_CTRL_INIT/EVP_CTRL_COPY was not called or failed.
If that happens in EVP_CipherInit_ex/EVP_CIPHER_CTX_copy set cipher = NULL,
aes_gcm_cleanup should check that gctx != NULL before calling OPENSSL_cleanse.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2562)
Fixed a memory leak in ASN1_digest and ASN1_item_digest.
Reworked error handling in asn1_item_embed_new.
Fixed error handling in int_ctx_new and EVP_PKEY_CTX_dup.
Fixed a memory leak in CRYPTO_free_ex_data.
Reworked error handing in x509_name_ex_d2i, x509_name_encode and x509_name_canon.
Check for null pointer in tls_process_cert_verify.
Fixes#2103#2104#2105#2109#2111#2115
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2342)
The core SipHash supports either 8 or 16-byte output and a configurable
number of rounds.
The default behavior, as added to EVP, is to use 16-byte output and
2,4 rounds, which matches the behavior of most implementations.
There is an EVP_PKEY_CTRL that can control the output size.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2216)
Originally a crash in 32-bit build was reported CHACHA20-POLY1305
cipher. The crash is triggered by truncated packet and is result
of excessive hashing to the edge of accessible memory. Since hash
operation is read-only it is not considered to be exploitable
beyond a DoS condition. Other ciphers were hardened.
Thanks to Robert Święcki for report.
CVE-2017-3731
Reviewed-by: Rich Salz <rsalz@openssl.org>
Originally a crash in 32-bit build was reported CHACHA20-POLY1305
cipher. The crash is triggered by truncated packet and is result
of excessive hashing to the edge of accessible memory (or bogus
MAC value is produced if x86 MD5 assembly module is involved). Since
hash operation is read-only it is not considered to be exploitable
beyond a DoS condition.
Thanks to Robert Święcki for report.
CVE-2017-3731
Reviewed-by: Rich Salz <rsalz@openssl.org>
This function is used to validate application supplied parameters. An
assert should be used to check for an error that is internal to OpenSSL.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2275)
When doing in place encryption the overlapping buffer check can fail
incorrectly where we have done a partial block "Update" operation. This
fixes things to take account of any pending partial blocks.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2275)
If we have previously been passed a partial block in an "Update" call then
make sure we properly increment the output buffer when we use it.
Fixes#2273
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2275)
Lots of references to 16 replaced by AES_BLOCK_SIZE. Also a few other style
tweaks in that function
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2275)
Remove duplicate defines from EVP source files.
Most of them were in evp.h, which is always included.
Add new ones evp_int.h
EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK is now always defined in evp.h, so
remove conditionals on it
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2201)
Add Poly1305 as a "signed" digest.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2128)
ChaCha20 code uses its own custom cipher_data. Add EVP_CIPH_CUSTOM_IV
and EVP_CIPH_ALWAYS_CALL_INIT so that the key and the iv can be set by
different calls of EVP_CipherInit_ex().
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2156)
New function EVP_PKEY_CTX_md() which takes a string and passes a digest
to a ctrl.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
