Changed a bad reference: test/Makefile -> test/build.info
Add ../apps/include as include path to include opt.h used by test/testutil.h.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9154)
SSL_shutdown can fail if called during initialization, and in such case, it'll
add an error to the error queue. This adds SSL_shutdown to the list of functions
that should preceed the call to SSL_get_error.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/7465)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9149)
We need blank lines on each side of a section heading.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9192)
The BIO_FLAGS_NONCLEAR_RST flag behavior was not properly documented
and it also caused the length to be incorrectly set after the reset
operation.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9179)
If a provider gets unloaded then any thread stop handlers that it had
registered will be left hanging. We should clean them up before tearing
down the provider.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9186)
If a test program goes wrong, it's sometimes helpful to be able to
trace what goes on in libcrypto and libssl.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9191)
With properties being specified in all kinds of places, including hard
coded in providers, it's not always easy to figure out exactly what
string was incorrect when the parser would just say something like
'parse failed' with no more details.
Adding extra data to the error, showing exactly what string is
incorrect, helps a bit. At the very least, this gives anyone
interested something to grep for.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9190)
The fips provider was creating the OPENSSL_CTX twice due to a previous
merge error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9184)
The "add error data" functions now append to the current error.
Add a test for this.
Cleanup some of the ERR_put functions.
In the FIPS module, always append "(in the FIPS module)" to any errors.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9181)
The old rule in Configure was that if the asm source had a file name
with 'ghash-' as part of the name, GHASH_ASM should be defined. Since
none of the aarch64 asm files has such a name, that macro shouldn't
have been defined.
Fixes#9173
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9178)
Two mistakes were made:
1. AES_ASM for x86 was misplaced
2. sse2 isn't applicable for x86_64 code
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9177)
The previous 2 commits moved supported groups and ciphers out of the
session object to avoid race conditions. We now also move ecpointformats
for consistency. There does not seem to be a race condition with access
to this data since it is only ever set in a non-resumption handshake.
However, there is no reason for it to be in the session.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)
Similarly to the previous commit we were storing the peer offered list
of ciphers in the session. In practice there is no need for this
information to be avilable from one resumption to the next since this
list is specific to a particular handshake. Since the session object is
supposed to be immutable we should not be updating it once we have decided
to resume. The solution is to remove the session list out of the session
object.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)
In TLSv1.3 the supported groups can be negotiated each time a handshake
occurs, regardless of whether we are resuming or not. We should not store
the supported groups information in the session because session objects
can be shared between multiple threads and we can end up with race
conditions. For most users this won't be seen because, by default, we
use stateless tickets in TLSv1.3 which don't get shared. However if you
use SSL_OP_NO_TICKET (to get stateful tickets in TLSv1.3) then this can
happen.
The answer is to move the supported the supported group information into
the SSL object instead.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)
When bufsize == 0, openssl_strerror_r should return 0 (if _GNU_SOURCE is defined),
to be consistent with non-_GNU_SOURCE variants, which exhibit the same behavior.
Fix a few cases, where the return value of openssl_strerror_r was ignored.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9163)
This avoids the case where a UEFI build on FreeBSD tries to call the system
issetugid function instead of returning 0 as it should do.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from #9158)
This new function works in the same way as OPENSSL_thread_stop() but
for a specified OPENSSL_CTX.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
This adds the ability to clean up a thread on a per OPENSSL_CTX basis.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
The RAND code needs to know about threads stopping in order to cleanup
local thread data. Therefore we add a callback for libcrypto to tell
providers about such events.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
This will need to be hooked up in a later commit with an event sent to
the FIPS provider informing it of thread stop events.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
We're going to need some of these functions in the FIPS module, but most
of the rest of the code in init.c is not needed. Therefore we split it out.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
In later commits this will allow providers to subscribe to thread stop
events. We will need this in the FIPS module. We also make thread stop
handling OPENSSL_CTX aware (different OPENSSL_CTXs may have different
thread local data that needs cleaning up).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
This adds the ability to take an OPENSSL_CTX parameter and either return it
as is (unchanged), or if it is NULL return a pointer to the default ctx.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)
Remove the *_asm templates in Configurations/00-base-templates.conf,
all attempts to inherit them, and the asm() perl function.
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)
Also took away the internal 'debug-linux-ia32-aes' config target, as
it's broken (refers to files that no longer exist).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)
As preparation for moving asm file specs to build.info files, we must
make sure there is still some base information to help select the
correct files.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)
This file information was hidden in config target files, when they
should really be part of build.info like any other file we build
from. With build.info variables, the task became much easier.
We take the opportunity to move apps_init_src and apps_aux_src to
apps/build.info as well, and to clean up apps/build.info.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)
As preparation for moving uplink file specs to build.info files, we
must make sure there is still some base information to help select the
correct files.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)
