By default `ec_scalar_mul_ladder` (which uses the Lopez-Dahab ladder
implementation) is used only for (k * Generator) or (k * VariablePoint).
ECDSA verification uses (a * Generator + b * VariablePoint): this commit
forces the use of `ec_scalar_mul_ladder` also for the ECDSA verification
path, while using the default wNAF implementation for any other case.
With this commit `ec_scalar_mul_ladder` loses the static attribute, and
is added to ec_lcl.h so EC_METHODs can directly use it.
While working on a new custom EC_POINTs_mul implementation, I realized
that many checks (e.g. all the points being compatible with the given
EC_GROUP, creating a temporary BN_CTX if `ctx == NULL`, check for the
corner case `scalar == NULL && num == 0`) were duplicated again and
again in every single implementation (and actually some
implementations lacked some of the tests).
I thought that it makes way more sense for those checks that are
independent from the actual implementation and should always be done, to
be moved in the EC_POINTs_mul wrapper: so this commit also includes
these changes.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
for specialized Montgomery ladder implementations
PR #6009 and #6070 replaced the default EC point multiplication path for
prime and binary curves with a unified Montgomery ladder implementation
with various timing attack defenses (for the common paths when a secret
scalar is feed to the point multiplication).
The newly introduced default implementation directly used
EC_POINT_add/dbl in the main loop.
The scaffolding introduced by this commit allows EC_METHODs to define a
specialized `ladder_step` function to improve performances by taking
advantage of efficient formulas for differential addition-and-doubling
and different coordinate systems.
- `ladder_pre` is executed before the main loop of the ladder: by
default it copies the input point P into S, and doubles it into R.
Specialized implementations could, e.g., use this hook to transition
to different coordinate systems before copying and doubling;
- `ladder_step` is the core of the Montgomery ladder loop: by default it
computes `S := R+S; R := 2R;`, but specific implementations could,
e.g., implement a more efficient formula for differential
addition-and-doubling;
- `ladder_post` is executed after the Montgomery ladder loop: by default
it's a noop, but specialized implementations could, e.g., use this
hook to transition back from the coordinate system used for optimizing
the differential addition-and-doubling or recover the y coordinate of
the result point.
This commit also renames `ec_mul_consttime` to `ec_scalar_mul_ladder`,
as it better corresponds to what this function does: nothing can be
truly said about the constant-timeness of the overall execution of this
function, given that the underlying operations are not necessarily
constant-time themselves.
What this implementation ensures is that the same fixed sequence of
operations is executed for each scalar multiplication (for a given
EC_GROUP), with no dependency on the value of the input scalar.
Co-authored-by: Sohaib ul Hassan <soh.19.hassan@gmail.com>
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
Fix prototype warnings triggered by -Wstrict-prototypes when configuring
with `enable-ec_nistp_64_gcc_128`
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6556)
This commit implements coordinate blinding, i.e., it randomizes the
representative of an elliptic curve point in its equivalence class, for
prime curves implemented through EC_GFp_simple_method,
EC_GFp_mont_method, and EC_GFp_nist_method.
This commit is derived from the patch
https://marc.info/?l=openssl-dev&m=131194808413635 by Billy Brumley.
Coordinate blinding is a generally useful side-channel countermeasure
and is (mostly) free. The function itself takes a few field
multiplicationss, but is usually only necessary at the beginning of a
scalar multiplication (as implemented in the patch). When used this way,
it makes the values that variables take (i.e., field elements in an
algorithm state) unpredictable.
For instance, this mitigates chosen EC point side-channel attacks for
settings such as ECDH and EC private key decryption, for the
aforementioned curves.
For EC_METHODs using different coordinate representations this commit
does nothing, but the corresponding coordinate blinding function can be
easily added in the future to extend these changes to such curves.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6501)
felem_neg does not produce an output within the tight bounds suitable
for felem_contract. This affects build configurations which set
enable-ec_nistp_64_gcc_128.
point_double and point_add, in the non-z*_is_zero cases, tolerate and
fix up the wider bounds, so this only affects point_add calls where the
other point is infinity. Thus it only affects the final addition in
arbitrary-point multiplication, giving the wrong y-coordinate. This is a
no-op for ECDH and ECDSA, which only use the x-coordinate of
arbitrary-point operations.
Note: ecp_nistp521.c has the same issue in that the documented
preconditions are violated by the test case. I have not addressed this
in this PR. ecp_nistp521.c does not immediately produce the wrong
answer; felem_contract there appears to be a bit more tolerant than its
documented preconditions. However, I haven't checked the point_add
property above holds. ecp_nistp521.c should either get this same fix, to
be conservative, or have the bounds analysis and comments reworked for
the wider bounds.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5779)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5449)
Around 138 distinct errors found and fixed; thanks!
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)
Change argument type of xxxelem_is_zero_int to const void*
to avoid the need of type casts.
Fixes#4413
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4450)
To make it consistent in the code base
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3749)
During precomputation if the group given is well known then we memcpy a
well known precomputation. However we go the wrong label in the code and
don't store the data properly. Consequently if we call have_precompute_mult
the data isn't there and we return 0.
RT#3600
Reviewed-by: Richard Levitte <levitte@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Add CRYPTO_EX_DATA add EndC_KEY_[gs]et_method, From Roumen Petrov.
Had to add various exdata calls to init/copy/free the exdata.
Had to remove const from some EC functions because exdata isn't
const-correct. :(
Also remove EC_EXTRA_DATA and use a union to hold the possible
pre-computed values and an enum to tell which value is in the
union. (Rich Salz)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: Richard Levitte <levitte@openssl.org>
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy. Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This gets BN_.*free:
BN_BLINDING_free BN_CTX_free BN_FLG_FREE BN_GENCB_free
BN_MONT_CTX_free BN_RECP_CTX_free BN_clear_free BN_free BUF_MEM_free
Also fix a call to DSA_SIG_free to ccgost engine and remove some #ifdef'd
dead code in engines/e_ubsec.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add OPENSSL_clear_free which merges cleanse and free.
(Names was picked to be similar to BN_clear_free, etc.)
Removed OPENSSL_freeFunc macro.
Fixed the small simple ones that are left:
CRYPTO_free CRYPTO_free_locked OPENSSL_free_locked
Reviewed-by: Richard Levitte <levitte@openssl.org>
Sometimes it fails to format them very well, and sometimes it corrupts them!
This commit moves some particularly problematic ones.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Have EC_NISTP224_64_GCC_128 treated like any algorithm, and have
disabled by default. If we don't do it this way, it screws up
libeay.num.
* util/libeay.num: make update
