As noted already, some platforms don't fill in ai_protocol as
expected. To circumvent that, we have BIO_ADDRINFO_protocol() to
compute a sensible answer in that case.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
It seems like it gives back gibberish. If we asked for a numeric
service, it's easy to check for a digit in the first position, and
if there isn't any, rewrite it using older methods.
Reviewed-by: Rich Salz <rsalz@openssl.org>
- One typo fixed in crypto/bio/b_addr.c
- Add a comment in doc/crypto/BIO_parse_hostserv.pod to explain the
blank lines with one lonely space each.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Don't cast malloc-family return values.
Also found some places where (a) blank line was missing; and (b)
the *wrong* return value was checked.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(if priority is set to host)
Signed-off-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Adds a new function BIO_ADDR_clear to reset a BIO_ADDR back to an
unitialised state, and to set the family to AF_UNSPEC.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Both getaddrinfo() and getnameinfo() have to be preceeded with a call
to BIO_sock_init().
Also, make sure to give gai_strerror() the actual error code.
Reviewed-by: Stephen Henson <steve@openssl.org>
The control commands that previously took a struct sockaddr * have
been changed to take a BIO_ADDR * instead.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Because of the way bio_lcl.h is organised, we must not include
internal/cryptlib.h before it. As a matter of fact, bio_lcl.h
includes internal/cryptlib.h on its own.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Because different platforms have different levels of support for IPv6,
different kinds of sockaddr variants, and some have getaddrinfo et al
while others don't, we could end up with a mess if ifdefs, duplicate
code and other maintainance nightmares.
Instead, we're introducing wrappers around the common form for socket
communication:
BIO_ADDR, closely related to struct sockaddr and some of its variants.
BIO_ADDRINFO, closely related to struct addrinfo.
With that comes support routines, both convenient creators and
accessors, plus a few utility functions:
BIO_parse_hostserv, takes a string of the form host:service and
splits it into host and service. It checks for * in both parts, and
converts any [ipv6-address] syntax to ust the IPv6 address.
BIO_lookup, looks up information on a host.
All routines handle IPv4 (AF_INET) and IPv6 (AF_INET6) addresses, and
there is support for local sockets (AF_UNIX) as well.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Now that we have the foundation for the "unified" build scheme in
place, we add build.info files. They have been generated from the
Makefiles in the same directories. Things that are platform specific
will appear in later commits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Remove lint, tags, dclean, tests.
This is prep for a new makedepend scheme.
This is temporary pending unified makefile, and might help it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Create Makefile's from Makefile.in
Rename Makefile.org to Makefile.in
Rename Makefiles to Makefile.in
Address review feedback from Viktor and Richard
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename to OPENSSL_mem_debug_{push,pop}.
Remove simple calls; keep only calls used in recursive functions.
Ensure we always push, to simplify so that we can always pop
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Add CRYPTO_free_ex_index (for shared libraries)
Unify and complete the documentation for all "ex_data" API's and objects.
Replace xxx_get_ex_new_index functions with a macro.
Added an exdata test.
Renamed the ex_data internal datatypes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Rebuild error source files: the new mkerr.pl functionality will now
pick up and translate static function names properly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
BIO_int_ctrl isn't made for the purpose BIO_get_conn_int_port used it
for.
This also changes BIO_C_GET_CONNECT to actually return the port
instead of assigning it to a pointer that was never returned back to
the caller.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Even though SOCKET is effectively declared as (void *) on Windows, it's
not actually a pointer, but an index within per-process table of
kernel objects. The table size is actually limited and its upper limit
is far below upper limit for signed 32-bit integer. This is what makes
cast in question possible.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Much related/similar work also done by
Ivan Nestlerode <ivan.nestlerode@sonos.com>
+Replace FILE BIO's with dummy ops that fail.
+Include <stdio.h> for sscanf() even with no-stdio (since the declaration
is there). We rely on sscanf() to parse the OPENSSL_ia32cap environment
variable, since it can be larger than a 'long'. And we don't rely on the
availability of strtoull().
+Remove OPENSSL_stderr(); not used.
+Make OPENSSL_showfatal() do nothing (currently without stdio there's
nothing we can do).
+Remove file-based functionality from ssl/. The function
prototypes were already gone, but not the functions themselves.
+Remove unviable conf functionality via SYS_UEFI
+Add fallback definition of BUFSIZ.
+Remove functions taking FILE * from header files.
+Add missing DECLARE_PEM_write_fp_const
+Disable X509_LOOKUP_hash_dir(). X509_LOOKUP_file() was already compiled out,
so remove its prototype.
+Use OPENSSL_showfatal() in CRYPTO_destroy_dynlockid().
+Eliminate SRP_VBASE_init() and supporting functions. Users will need to
build the verifier manually instead.
+Eliminate compiler warning for unused do_pk8pkey_fp().
+Disable TEST_ENG_OPENSSL_PKEY.
+Disable GOST engine as is uses [f]printf all over the place.
+Eliminate compiler warning for unused send_fp_chars().
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Add the ability to peek at a message from the DTLS read BIO. This is needed
for the DTLSv1_listen rewrite.
Reviewed-by: Andy Polyakov <appro@openssl.org>
If we use BIO_new_file(), on Windows it'll jump through hoops to work
around their unusual charset/Unicode handling. it'll convert a UTF-8
filename to UCS-16LE and attempt to use _wfopen().
If you use BIO_read_filename(), it doesn't do this. Shouldn't it be
consistent?
It would certainly be nice if SSL_use_certificate_chain_file() worked.
Also made BIO_C_SET_FILENAME work (rsalz)
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add secure heap for storage of private keys (when possible).
Add BIO_s_secmem(), CBIGNUM, etc.
Add BIO_CTX_secure_new so all BIGNUM's in the context are secure.
Contributed by Akamai Technologies under the Corporate CLA.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The return type of BIO_number_read() and BIO_number_written() as well as
the corresponding num_read and num_write members in the BIO structure has
been changed from unsigned long to uint64_t. On platforms where an unsigned
long is 32 bits (e.g. Windows) these counters could overflow if >4Gb is
transferred.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This fixes a memory leak that can occur whilst duplicating a BIO chain if
the call to CRYPTO_dup_ex_data() fails. It also fixes a second memory leak
where if a failure occurs after successfully creating the first BIO in the
chain, then the beginning of the new chain was not freed.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Stephen Henson <steve@openssl.org>
The code in bss_dgram.c checks if IP_MTUDISCOVER is defined, where it
should test for IP_MTU_DISCOVER
RT#3888
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The members of struct timeval on OpenVMS are unsigned. The logic for
calculating timeouts needs adjusting to deal with this.
RT#3862
Reviewed-by: Richard Levitte <levitte@openssl.org>
We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in. This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.
This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are header files in crypto/ that are used by a number of crypto/
submodules. Move those to crypto/include/internal and adapt the
affected source code and Makefiles.
The header files that got moved are:
crypto/cryptolib.h
crypto/md32_common.h
Reviewed-by: Rich Salz <rsalz@openssl.org>
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy. Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The static function dynamically allocates an output buffer if the output
grows larger than the static buffer that is normally used. The original
logic implied that |currlen| could be greater than |maxlen| which is
incorrect (and if so would cause a buffer overrun). Also the original
logic would call OPENSSL_malloc to create a dynamic buffer equal to the
size of the static buffer, and then immediately call OPENSSL_realloc to
make it bigger, rather than just creating a buffer than was big enough in
the first place. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot
Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This engine is for VMS only, and isn't really part of the core OpenSSL
but rather a side project of its own that just happens to have tagged
along for a long time. The reasons why it has remained within the
OpenSSL source are long lost in history, and there not being any real
reason for it to remain here, it's time for it to move out.
This side project will appear as a project in its own right, the
location of which will be announced later on.
Reviewed-by: Tim Hudson <tjh@openssl.org>
With no more symlinks, there's no need for those variables, or the links
target. This also goes for all install: and uninstall: targets that do
nothing but copy $(EXHEADER) files, since that's now taken care of by the
top Makefile.
Also, removed METHTEST from test/Makefile. It looks like an old test that's
forgotten...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rather than making include/openssl/foo.h a symlink to
crypto/foo/foo.h, this change moves the file to include/openssl/foo.h
once and for all.
Likewise, move crypto/foo/footest.c to test/footest.c, instead of
symlinking it there.
Originally-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Fix compilation failure when SCTP is compiled due to incorrect define.
Reported-by: Conrad Kostecki <ck+gentoobugzilla@bl4ckb0x.de>
URL: https://bugs.gentoo.org/543828
RT#3758
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
BIO_debug_callback() no longer assumes the hexadecimal representation of
a pointer fits in 8 characters.
Signed-off-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Miscellaneous unchecked malloc fixes. Also fixed some mem leaks on error
paths as I spotted them along the way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The mkstack.pl script now generates the entire safestack.h file.
It generates output that follows the coding style.
Also, removed all instances of the obsolete IMPLEMENT_STACK_OF
macro.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
Remove MS_STATIC; it's a relic from platforms <32 bits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Sometimes it fails to format them very well, and sometimes it corrupts them!
This commit moves some particularly problematic ones.
Reviewed-by: Tim Hudson <tjh@openssl.org>
OPENSSL_NO_RIPEMD160, OPENSSL_NO_RIPEMD merged into OPENSSL_NO_RMD160
OPENSSL_NO_FP_API merged into OPENSSL_NO_STDIO
Two typo's on #endif comments fixed:
OPENSSL_NO_ECB fixed to OPENSSL_NO_OCB
OPENSSL_NO_HW_SureWare fixed to OPENSSL_NO_HW_SUREWARE
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix memory leak by freeing up saved_message.data if it is not NULL.
PR#3489
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Return an error code for I/O errors instead of an assertion failure.
PR#3470
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
used with no explanation. Some of this was introduced as part of RT#1929. The
value 28 is the length of the IP header (20 bytes) plus the UDP header (8
bytes). However use of this constant is incorrect because there may be
instances where a different value is needed, e.g. an IPv4 header is 20 bytes
but an IPv6 header is 40. Similarly you may not be using UDP (e.g. SCTP).
This commit introduces a new BIO_CTRL that provides the value to be used for
this mtu "overhead". It will be used by subsequent commits.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Don't attempt to access msg structure if recvmsg returns an error.
PR#3483
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Problem with #ifdef in the BIO_CTRL_DGRAM_MTU_DISCOVER case that
is different from the BIO_CTRL_DGRAM_QUERY_MTU one which seems
correct.
Reviewed-by: Matt Caswell <matt@openssl.org>
Windows 8 SDKs complain that GetVersion() is deprecated.
We only use GetVersion like this:
(GetVersion() < 0x80000000)
which checks if the Windows version is NT based. Use a macro check_winnt()
which uses GetVersion() on older SDK versions and true otherwise.
PR: 2809
DTLS/SCTP requires DATA and FORWARD-TSN chunks to be protected with
SCTP-AUTH. It is checked if this has been activated successfully for
the local and remote peer. Due to a bug, however, the
gauth_number_of_chunks field of the authchunks struct is missing on
FreeBSD, and was therefore not considered in the OpenSSL implementation.
This patch sets the corresponding pointer for the check correctly
whether or not this bug is present.
(cherry picked from commit f596e3c491)
connect() are as finicky as sendto() when it comes to socket address
length. As it turned out they are, therefore the fix. Note that you
can't reproduce the problem on Linux, it was failing on Solaris,
FreeBSD, most likely on more...
Submitted by: steve@openssl.org
Some systems have broken IPv6 headers and/or implementations. If
OPENSSL_USE_IPV6 is set to 0 IPv6 is not used, if it is set to 1 it is used
and if undefined an attempt is made to detect at compile time by checking
if AF_INET6 is set and excluding known problem platforms.
.DLL, in particular static build. The issue has been discussed in RT#1230
and later on openssl-dev, and mutually exclusive approaches were suggested.
This completes compromise solution suggested in RT#1230.
PR: 1230
knock-on work than expected - they've been extracted into a patch
series that can be completed elsewhere, or in a different branch,
before merging back to HEAD.
I just compiled the 9.9-dev version from the 12022007 tarball under
DJGPP. There were only 2 changes needed, one for b_sock.c, since
DJGPP with WATT32 doesn't define socklen_t and one for testtsa to
handle DOS style path separators. I also noted what seems to be a
typographical error in ts.pod. The test suite passes. The patch is
attached.
Since I am in the US, I have sent notifications to the Bureau of
Industry and Security and to the NSA.
I thought it was about time I dusted this off. This stuff had been sitting on
my hard drive for *ages* (2003 in fact). Hasn't been tested well and may not
work properly.
Nothing uses it at present which is just as well.
Think of this as a traditional Christmas present which looks far more
impressive in the adverts and on the box, some of the bits are missing and
falls to bits if you play with it too much.
- eliminate ambiguities between GNU-ish and SysV-ish make flavors;
- switch [back] to -e;
- fold/unify rules;
This is follow-up to the patch introducing common BUILDENV. Idea is
to collect as much parameters in $(TOP) as possible and "strip" lower
Makefiles for most variables [and thus makes them more readable].
1107. He says:
This is a followup to the NetWare patch that was applied to beta3. It
does the following:
- Fixes a problem in the CLib build with undefined symbols.
- Adds the ability to use BSD sockets as the default for the OpenSSL
socket BIO. NetWare supports 2 flavors of sockets and our Apache
developers need BSD sockets as a configurable option when building
OpenSSL. This adds that for them.
- Updates to the INSTALL.NW file to explain new options.
I have tried very hard to make sure all the changes are in NetWare
specific files or guarded carefully to make sure they only impact
NetWare builds. I have tested the Windows build to make sure it does
not break that since we have made changes to mk1mf.pl.
We are still working the gcc cross compile for NetWare issue and hope
to have a patch for that before beta 6 is released.
compiled into *our* aplpications. That's because mingw is always
consistent with itself. Having library-side code linked into .dll
makes it possible to deploy the .dll with user-code compiled with
another compiler [which is pretty much the whole point behind Applink].
1. "unsigned long long" isn't portable changed: to BN_ULLONG.
2. The LL prefix isn't allowed in VC++ but it isn't needed where it is used.
2. Avoid lots of compiler warnings about signed/unsigned mismatches.
3. Include new library directory pqueue in mk1mf build system.
4. Update symbols.
