Providing a spkac file with no default section causes a double free.
Thanks to Brian Carpenter for reporting this issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
A BIO_read() 0 return indicates that a failure occurred that may be
retryable. An SSL_read() 0 return indicates a non-retryable failure. Check
that if BIO_read() returns 0, SSL_read() returns <0. Same for SSL_write().
The asyncio test filter BIO already returns 0 on a retryable failure so we
build on that.
Reviewed-by: Richard Levitte <levitte@openssl.org>
A zero return from BIO_read()/BIO_write() could mean that an IO operation
is retryable. A zero return from SSL_read()/SSL_write() means that the
connection has been closed down (either cleanly or not). Therefore we
should not propagate a zero return value from BIO_read()/BIO_write() back
up the stack to SSL_read()/SSL_write(). This could result in a retryable
failure being treated as fatal.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move manpages to manX directories
Add Windows/VMS install fix from Richard Levitte
Update README
Fix typo's
Remove some duplicates
Reviewed-by: Richard Levitte <levitte@openssl.org>
The current version of the VMS compiler provides C99 features,
strictly language wise. Unfortunately, even the most recent standard
library isn't fully updated for that standard, so we need to use an
earlier standard that the compiler supports.
Most importantly, this affects the __STDC_VERSION__ value, which the
compiler unfortunately currently defaults to 199901L. With this
change we won't have to give VMS special treatment when looking for
features based on that macro.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1785)
The __DragonFly__ macros were introduced in issue #1546 along with a
function naming fix, but it was decided they should be handled
separately.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1765)
In apps/apps.c, one can set up an engine with setup_engine().
However, we freed the structural reference immediately, which means
that for engines that don't already have a structural reference
somewhere else (because it's a built in engine), we end up returning
an invalid reference.
Instead, the function release_engine() is added, and called at the end
of the routines that call setup_engine().
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1643)
So far, apps and test programs, were a bit rigidely accessible as
executables or perl scripts. But what about scripts in some other
language? Or what about running entirely external programs? The
answer is certainly not to add new functions to access scripts for
each language or wrapping all the external program calls in our magic!
Instead, this adds a new functions, cmd(), which is useful to access
executables and scripts in a more generalised manner. app(), test(),
fuzz(), perlapp() and perltest() are rewritten in terms of cmd(), and
serve as examples how to do something similar for other scripting
languages, or constrain the programs to certain directories.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1686)
Only set the load_crypto_strings_inited to 1 when err_load_crypto_strings_int was called.
This solves the following issue:
- openssl is built with no-err
- load_crypto_strings_inited is set to 1 during the OPENSSL_init_crypto call
- During the cleanup: OPENSSL_cleanup, err_free_strings_int is called because load_crypto_strings_inited == 1
- err_free_strings_int calls do_err_strings_init because it has never been called
- Now do_err_strings_init calls OPENSSL_init_crypto
- But since we are in the cleanup (stopped == 1) this results in an error:
CRYPTOerr(CRYPTO_F_OPENSSL_INIT_CRYPTO, ERR_R_INIT_FAIL);
- which then tries to initialize everything we are trying to clean up: ERR_get_state, ossl_init_thread_start, etc
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1654)
crypto/asn1/asn1_item_list.c needed including dh.h and rsa.h directly.
The reason is that they are not included by x509.h when configured
'no-deprecated'
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1741)
crypto/s390xcap.c: internal/cryptlib.h needs to be included for
OPENSSL_cpuid_setup function prototype is located there to avoid
build error due to -Werror=missing-prototypes.
Signed-off-by: Patrick Steuer <psteuer@mail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
CLA: trivial
crypto/evp/e_aes.c: Types of inp and out parameters of
AES_xts_en/decrypt functions need to be changed from char to
unsigned char to avoid build error due to
'-Werror=incompatible-pointer-types'.
crypto/aes/asm/aes-s390x.pl: Comments need to reflect the above
change.
Signed-off-by: Patrick Steuer <psteuer@mail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
CLA: trivial
crypto/asn1/a_strex.c: Type of width variable in asn1_valid_host
function needs to be changed from char to signed char to avoid
build error due to '-Werror=type-limits'.
Signed-off-by: Patrick Steuer <psteuer@mail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
CLA: trivial
OpenSSL 1.1.0 will negotiate EtM on DTLS but will then not actually *do* it.
If we use DTLSv1.2 that will hopefully be harmless since we'll tend to use
an AEAD ciphersuite anyway. But if we're using DTLSv1, then we certainly
will end up using CBC, so EtM is relevant — and we fail to interoperate with
anything that implements EtM correctly.
Fixing it in HEAD and 1.1.0c will mean that 1.1.0[ab] are incompatible with
1.1.0c+... for the limited case of non-AEAD ciphers, where they're *already*
incompatible with other implementations due to this bug anyway. That seems
reasonable enough, so let's do it. The only alternative is just to turn it
off for ever... which *still* leaves 1.0.0[ab] failing to communicate with
non-OpenSSL implementations anyway.
Tested against itself as well as against GnuTLS both with and without EtM.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Don't rely on embedded flag to free strings correctly: it wont be
set if there is a malloc failure during initialisation.
Thanks to Guido Vranken for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1725)
In 1.1.0 we only allowed a strictly increasing version number in the *.num
files, i.e. you could never introduce a symbol at the end of the *.num file
with a lower version number than the one preceding it. This made sense for
1.1.0. However in master we may be introducing symbols for backport to
1.1.0. Therefore it is ok in master to have a symbol for version 1.1.0c
coming after a symbol for version 1.1.1.
This commit fixes the check in mkdef.pl to be a bit looser to allow this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
