This allows the caller to guarantee that there is sufficient space for a
number of insertions without reallocation.
The expansion ratio when reallocating the array is reduced to 1.5 rather than 2.
Change bounds testing to use a single size rather than both INT_MAX and
SIZE_MAX. This simplifies some of the tests.
Switch the stack pointers to data from char * to void *
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4386)
OpenSSL 1.1.0 made SSL_CTX and SSL structs opaque and introduced a new
API to set the minimum and maximum protocol version for SSL_CTX with
TLS_method(). Add getters to introspect the configured versions:
int SSL_CTX_get_min_proto_version(SSL_CTX *ctx);
int SSL_CTX_get_max_proto_version(SSL_CTX *ctx);
int SSL_get_min_proto_version(SSL *ssl);
int SSL_get_max_proto_version(SSL *ssl);
NOTE: The getters do not resolv the version in case when the minimum or
maxium version are configured as '0' (meaning auto-select lowest and
highst version number).
Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4364)
A new method is added to EVP_PKEY_METH as:
int (*check) (EVP_PKEY_CTX *ctx);
and to EVP_PKEY_ASN1_METHOD as:
int (*pkey_check) (EVP_PKEY_CTX *ctx);
This is used to check the validity of a specific key.
The order of calls is:
EVP_PKEY_check -> pmeth.check -> ameth.pkey_check.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4337)
"Early callback" is a little ambiguous now that early data exists.
Perhaps "ClientHello callback"?
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4349)
This allows completely arbitrary passphrases to be entered, including
NUL bytes.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3821)
The program will fail to run if it doesn't exist anyway, no need to
check its existence here.
Fixes#4306
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4309)
When parsing the header files, mkdef.pl didn't clear the line
terminator properly. In most cases, this didn't matter, but there
were moments when this caused parsing errors (such as CRLFs in certain
cases).
Fixes#4267
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4304)
The returned ID matches with what IANA specifies (or goes on the
wire anyway, IANA notwithstanding).
Doc is added.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4107)
The one creating the DRBG should instantiate it, it's there that we
know which parameters we should use to instantiate it.
This splits the rand init in two parts to avoid a deadlock
because when the global drbg is created it wands to call
rand_add on the global rand method.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #4268
With the introduction of RAND_poll_ex(), the `RAND_add()` calls were
replaced by meaningless cb(...). This commit changes the 'cb(...)'
calls back to 'rand_add(...)' calls by changing the signature as follows:
-int RAND_poll_ex(RAND_poll_fn cb, void *arg);
+int RAND_poll_ex(RAND_poll_cb rand_add, void *arg);
Changed the function typedef name to 'RAND_poll_cb' to emphasize the fact
that the function type represents a callback function.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4266)
The existing function SSL_get_current_cipher() queries the
current session for the ciphersuite in use, but there is no way
for application code to determine what ciphersuite has been
negotiated and will be used in the future, prior to ChangeCipherState
(or the TLS 1.3 equivalent) causing the new cipher to take effect and
become visible in the session information. Expose this information
to appropriate application callbacks to use during the handshake.
The name SSL_get_pending_cipher() was chosen for compatibility with
BoringSSL's routine of that name.
Improve the note on macro implementations in SSL_get_current_cipher.pod
while here.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4070)
This allows callers to set a mark, and then clear it without removing
the errors. Useful in case an error is encountered that should be
returned up the call stack.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4094)
Instead of having perl modules under test/testlib, util and util/perl,
consolidate them all to be inside util/perl.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4069)
Write missing prime.pod and srp.pod
Implement -c in find-doc-nits (for command options)
Other fixes to some manpages
Use B<-I<digest|cipher>> notation
Split up multiple flags into a single entry in the synopsis.
Add -1 and missing-help to list command.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4144)
Add an interface that allows accessing the scrypt KDF as a PKEY_METHOD.
This fixes#4021 (at least for the scrypt portion of the issue).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4026)
Add missing ASN1_TIME functions
Do some cleanup of the ASN1_TIME code.
Add ASN1_TIME_normalize() to normalize ASN1_TIME structures.
Add ASN1_TIME_compare() to compare two ASN1_TIME structures.
Add ASN1_TIME_cmp_time_t() to compare an ASN1_TIME to time_t
(generic version of ASN1_UTCTIME_cmp_time_t()).
Replace '0' .. '9' compares with isdigit()
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2753)
Add a new global DRBG for private keys used by RAND_priv_bytes.
Add BN_priv_rand() and BN_priv_rand_range() which use RAND_priv_bytes().
Change callers to use the appropriate BN_priv... function.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4076)
Give each SSL object it's own DRBG, chained to the parent global
DRBG which is used only as a source of randomness into the per-SSL
DRBG. This is used for all session, ticket, and pre-master secret keys.
It is NOT used for ECDH key generation which use only the global
DRBG. (Doing that without changing the API is tricky, if not impossible.)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4050)
If RAND_add wraps around, XOR with existing. Add test to drbgtest that
does the wrap-around.
Re-order seeding and stop after first success.
Add RAND_poll_ex()
Use the DF and therefore lower RANDOMNESS_NEEDED. Also, for child DRBG's,
mix in the address as the personalization bits.
Centralize the entropy callbacks, from drbg_lib to rand_lib.
(Conceptually, entropy is part of the enclosing application.)
Thanks to Dr. Matthias St Pierre for the suggestion.
Various code cleanups:
-Make state an enum; inline RANDerr calls.
-Add RAND_POLL_RETRIES (thanks Pauli for the idea)
-Remove most RAND_seed calls from rest of library
-Rename DRBG_CTX to RAND_DRBG, etc.
-Move some code from drbg_lib to drbg_rand; drbg_lib is now only the
implementation of NIST DRBG.
-Remove blocklength
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4019)
Documentation and test cases are also updated
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3783)
File::Glob::glob is deprecated, it's use generates this kind of
message:
File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at ../master/Configure line 277.
So instead, use a construction that makes the caller glob() use
File::Glob::bsd_glob().
Note that we're still excluding VMS, as it's directory specs use '['
and ']', which have a different meaning with bsd_glob and would need
some extra quoting. This might change, but later.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4040)
Since scrypt PBKDF can be used both in PKCS#5 and PKCS#12 files,
do share the code between them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1334)
OpenSSL already has the feature of SSL_MODE_RELEASE_BUFFERS that can
be set to release the read or write buffers when data has finished
reading or writing. OpenSSL will automatically re-allocate the buffers
as needed. This can be quite aggressive in terms of memory allocation.
This provides a manual mechanism. SSL_free_buffers() will free
the data buffers if there's no pending data. SSL_alloc_buffers()
will realloc them; but this function is not strictly necessary, as it's
still done automatically in the state machine.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2240)
Fixes: issue #3747
make SSL_CIPHER_standard_name globally available and introduce a new
function OPENSSL_cipher_name.
A new option '-convert' is also added to 'openssl ciphers' app.
Documentation and test cases are added.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3859)
Ported from the last FIPS release, with DUAL_EC and SHA1 and the
self-tests removed. Since only AES-CTR is supported, other code
simplifications were done. Removed the "entropy blocklen" concept.
Moved internal functions to new include/internal/rand.h.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3789)
Fix a =head1 section name
Fix a typo in POD label
Remove a spurious =back
Add a missing blank line
Avoid 'legacy' -- use 'deprecated' if still needed if we cannot just reword.
Always do strict checking
Do not warn about missing "RETURN VALUES" unless -s is set.
Change OpenSSL version 1.1 -> 1.1.0
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3830)
Instead, make it possible to disable the console reader that's part of
the UI module. This makes it possible to use the UI API and other UI
methods in environments where the console reader isn't useful.
To disable the console reader, configure with 'no-ui-console' /
'disable-ui-console'.
'no-ui' / 'disable-ui' is now an alias for 'no-ui-console' /
'disable-ui-console'.
Fixes#3806
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3820)
For Windows, we care which way it is, the resulting file is just a pile
of symbols. For VMS, we really need to care about the numeric ordering,
and getting the symbols sorted by symbol version too didn't agree with
that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3804)
This allows us to guard Unix specific functions with
#ifndef / #ifdef OPENSSL_SYS_UNIX
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3804)
This STORE module adds the following functionality:
- A function OSSL_STORE_open(), OSSL_STORE_load() and OSSL_STORE_close()
that accesses a URI and helps loading the supported objects (PKEYs,
CERTs and CRLs for the moment) from it.
- An opaque type OSSL_STORE_INFO that holds information on each loaded
object.
- A few functions to retrieve desired data from a OSSL_STORE_INFO
reference.
- Functions to register and unregister loaders for different URI
schemes. This enables dynamic addition of loaders from applications
or from engines.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3542)
To make sure that our symbols don't clash with other libraries, we
claim the namespaces OSSL and OPENSSL. Because C doesn't provide
namespaces, the only solution is to have them as prefixes on symbols,
thus we allow OSSL_ and OPENSSL_ as prefixes.
These namespace prefixes are optional for the foreseeable future, and
will only be used for new modules as needed on a case by case basis,
until further notice.
For extra safety, there's an added requirement that module names -
apart from the namespace prefix - be at least 2 characters long.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3781)
Put them into the TLSProxy::Message namespace along with the extension
type constants.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3326)
Reading the prologue of this file conserved the "# Function codes"
line, and then duplicated it when rewriting this file, adding a new
"# Function codes" line everytime there's an update.
Better then to skip over all comment lines and have the prologue
defined in mkerr.pl, just the same as we do with the other affected
files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3664)
Sometimes, one might only want to rework a subset of all the internal
error codes. -module allows the caller to specify exactly which
library modules to rewrite.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3662)
Add "*" as indicator meaning the function/reason is removed, so put an
empty string in the function/reason string table; this preserves backward
compatibility by keeping the #define's.
In state files, trailing backslash means text is on the next line.
Add copyright to state files
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3640)
It is an API to be used from the early callback that indicates what
extensions were present in the ClientHello, and in what order.
This can be used to eliminate unneeded calls to SSL_early_get0_ext()
(which itself scales linearly in the number of extensions supported
by the library).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2976)
Make funcs to deal with non-null-term'd string
in both asn1_generalizedtime_to_tm() and asn1_utctime_to_tm().
Fixes issue #3444.
This one is used to enforce strict format (RFC 5280) check and to
convert GeneralizedTime to UTCTime.
apps/ca has been changed to use the new API.
Test cases and documentation are updated/added
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3566)
The search is approximate; look only for those that look like
functions.
[skip ci]
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3641)
Fix test for "documenting private functions"
And add -p flag to doc-nits recipe
Mark when things were deprecated, if doc'd as such
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3624)
This works with ASN1_UTCTIME and ASN1_GENERALIZED_TIME
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3378)
Run perltidy on util/mkerr
Change some mkerr flags, write some doc comments
Make generated tables "const" when genearting lib-internal ones.
Add "state" file for mkerr
Renerate error tables and headers
Rationalize declaration of ERR_load_XXX_strings
Fix out-of-tree build
Add -static; sort flags/vars for options.
Also tweak code output
Moved engines/afalg to engines (from master)
Use -static flag
Standard engine #include's of errors
Don't linewrap err string tables unless necessary
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3392)
Report if any non-public items are documented.
Add util/private.num that lists items that aren't in the public
(lib*.num) files that we do want to document.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3603)
This can be used by engines that need to retain the data for a longer time
than just the call where this user data is passed.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3575)
In a recent PR (#3566) it seems that TLSProxy gave up trying to connect to
the server process too quickly. This meant the test failed even though the
server *did* eventually start. Currently we try 3 times to connect with a
0.1 second pause between each attempt. That is probably too aggressive.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3587)
Issue #3562 describes a problem where a race condition can occur in the
Proxy such that a test "ok" line can appear in the middle of other text
causing the test harness to miss it. The issue is that we do not wait for
the client process to finish after the test is complete, so that process may
continue to write data to stdout/stderr at the same time that the test
harness does.
This commit fixes TLSProxy so that we always wait for the client process to
finish before continuing.
Fixes#3562
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3567)
Verify that we fail if we receive an HRR but no change will result in
ClientHello2.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3414)
Split the PEM_bytes_read_bio() implementation out into a
pem_bytes_read_bio_flags() helper, to allow it to pass PEM_FLAG_SECURE
as needed. Adjust the cleanup to properly use OPENSSL_secure_free()
when needed, and reimplement PEM_bytes_read() as a wrapper around
the _flags helper.
Add documentation for PEM_bytes_read_bio() and the new secmem variant.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1700)
The extended function includes a 'flags' argument to allow callers
to specify different requested behaviors. In particular, callers can
request that temporary storage buffers are allocated from the secure heap,
which could be relevant when loading private key material.
Refactor PEM_read_bio to use BIO_mems instead of BUFs directly,
use some helper routines to reduce the overall function length, and make
some of the checks more reasonable.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1700)
This enables us to know what messages the extensions are relevant for in
TLSv1.3. The new file format is not compatible with the previous one so
we call it SERVERINFOV2.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)
Add padding callback for application control
Standard block_size callback
Documentation and tests included
Configuration file/s_client/s_srver option
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3130)
When you want to debug a test that goes wrong, it's useful to know
exactly what subprocess commands are run.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3342)
Provide a way to test whether the SSL_SESSION object can be used to resume a
sesion or not.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3008)
The CA names should be printed according to user's decision
print_name instead of set of BIO_printf
dump_cert_text instead of set of BIO_printf
Testing cyrillic output of X509_CRL_print_ex
Write and use X509_CRL_print_ex
Reduce usage of X509_NAME_online
Using X509_REQ_print_ex instead of X509_REQ_print
Fix nameopt processing.
Make dump_cert_text nameopt-friendly
Move nameopt getter/setter to apps/apps.c
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3262)
The existing BIO_lookup() wraps a call to getaddrinfo and provides an
abstracted capability to lookup addresses based on socket type and family.
However it provides no ability to lookup based on protocol. Normally,
when dealing with TCP/UDP this is not required. However getaddrinfo (at
least on linux) never returns SCTP addresses unless you specifically ask
for them in the protocol field. Therefore BIO_lookup_ex() is added which
provides the protocol field.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
The deprecation checking code here didn't work the same way as in
Configure, and used $config{options} to find an --api= option that
was never there. This is replaced with checking $config{api}, which
is the controlling variable for deprecation.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3126)
Teach util/mkdef.pl to recognise these lines:
#if OPENSSL_API_COMPAT < 0xXXXXXXXXL
#if OPENSSL_API_COMPAT >= 0xXXXXXXXXL
and add corresponding markers in util/*.num
A final 'make update' sets those markers right for LONG and ZLONG.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3126)
The old custom extensions API was not TLSv1.3 aware. Extensions are used
extensively in TLSv1.3 and they can appear in many different types of
messages. Therefore we need a new API to be able to cope with that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3139)
Fix some comments too
[skip ci]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3069)
Check that we handle changes of ciphersuite between HRR and ServerHello
correctly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
Draft-19 changes the HRR transcript hash so that the initial ClientHello
is replaced in the transcript with a special synthetic message_hash message
that just contains a hash of ClientHello1 as its message body.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
This change will mean we will lose interoperability with draft-18
implementations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
The logic for testing whether the sessionfile has been created or not
was faulty and could result in race conditions. If you "lose" the tests
hang waiting for a session file that's never going to arrive.
Fixes#2950
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2955)
It turns out that /DSF didn't do any good for our purposes. Instead,
remove the CALL_DEBUG flag from any image we link. This ensures that
we can have debugging information in the image files, but don't
automatically end up in a debugging session upon image activation.
Unfortunately, this means the CALL_DEBUG must be turned on when there
is a need to run with the debugger activated, and to turn it off when
done. This has been documented in NOTES.VMS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2957)
[.util]shareable_image_wrap.c.in was never useful because lib$spawn()
insisted on combining stdout and stderr into one.
Instead, we introduce two scripts that create and destroy a temporary
environment where the local shareable images become available,
[.util]local_shlib.com and [.util]unlocal_shlib.com. They also define
DBG$IMAGE_DSF_PATH, which is require so the debugger can find the Debug
Symbol Files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2947)
Add 2017 copyright year
Add missing typedef to NAME
Remove ec(7) and bn(7) doc links
Remove .pod link errors, bogus links, make a few typo corrections
Fix some typo's in links and some missing items.
Don't link to C runtime functions (See OPENSSL_malloc for example/precedent)
Document ASN1_tag2str(), add a few typedef's that were missing from NAME
Update doc-nits target; addresses
https://github.com/openssl/openssl/pull/1900#issuecomment-259943891,
Merge check-doc-links into find-doc-nits; if run regularly, would have found
https://github.com/openssl/openssl/pull/2825
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2862)
We just check that if we insert a cookie into an HRR it gets echoed back
in the subsequent ClientHello.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2839)
This is for consistency with the rest of the API where all the functions
are called *early_data*.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
This is for consistency with the rest of the API where all the functions
are called *early_data*.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
We provide SSL_write_early() which *must* be called first on a connection
(prior to any other IO function including SSL_connect()/SSL_do_handshake()).
Also SSL_write_early_finish() which signals the end of early data.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
There are cases when, if you pass a NULL UI_METHOD, the called
function will use an internal default. This is well and good, but
there may be cases when this is undesirable and one would rather send
in a UI that does absolutely nothing (sort of a /dev/null). UI_null()
is the UI_METHOD for this purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2744)
Provide a callback interface that gives the application the ability
to adjust the nascent SSL object at the earliest stage of ClientHello
processing, immediately after extensions have been collected but
before they have been processed.
This is akin to BoringSSL's "select_certificate_cb" (though it is not
API compatible), and as the name indicates, one major use is to examine
the supplied server name indication and select what certificate to
present to the client. However, it can also be used to make more
sweeping configuration changes to the SSL object according to the
selected server identity and configuration. That may include adjusting
the permitted TLS versions, swapping out the SSL_CTX object (as is
traditionally done in a tlsext_servername_callback), changing the
server's cipher list, and more.
We also wish to allow an early callback to indicate that it needs to perform
additional work asynchronously and resume processing later. To that effect,
refactor the second half of tls_process_client_hello() into a subroutine to be
called at the post-processing stage (including the early callback itself), to
allow the callback to result in remaining in the same work stage for a later
call to succeed. This requires allocating for and storing the CLIENTHELLO_MSG
in the SSL object to be preserved across such calls, but the storage is
reclaimed after ClientHello processing finishes.
Information about the CliehtHello is available to the callback by means of
accessor functions that can only be used from the early callback. This allows
extensions to make use of the existing internal parsing machinery without
exposing structure internals (e.g., of PACKET), so that applications do not
have to write fragile parsing code.
Applications are encouraged to utilize an early callback and not use
a servername_callback, in order to avoid unexpected behavior that
occurs due to the relative order of processing between things like
session resumption and the historical servername callback.
Also tidy up nearby style by removing unnecessary braces around one-line
conditional bodies.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Move ssl_bytes_to_cipher_list() to ssl_lib.c and create a public
wrapper around it. This lets application early callbacks easily get
SSL_CIPHER objects from the raw ciphers bytes without having to
reimplement the parsing code. In particular, they do not need to
know the details of the sslv2 format ClientHello's ciphersuite
specifications.
Document the new public function, including the arguably buggy behavior
of modifying the supplied SSL object. On the face of it, such a function
should be able to be pure, just a direct translation of wire octets to
internal data structures.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
This implementation is written in endian agnostic C code. No attempt
at providing machine specific assembly code has been made. This
implementation expands the evptests by including the test cases from
RFC 5794 and ARIA official site rather than providing an individual
test case. Support for ARIA has been integrated into the command line
applications, but not TLS. Implemented modes are CBC, CFB1, CFB8,
CFB128, CTR, ECB and OFB128.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2337)
The core SipHash supports either 8 or 16-byte output and a configurable
number of rounds.
The default behavior, as added to EVP, is to use 16-byte output and
2,4 rounds, which matches the behavior of most implementations.
There is an EVP_PKEY_CTRL that can control the output size.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2216)
TLSProxy normally fires off s_client, which creates a connection to the
server. TLSProxy also pipes some data to send to the process and s_client
automatically exits when the pipe hits eof. Unfortunately this means that
it sends the data and closes before it has processed the NewSessionTicket
returned from the server in TLSv1.3. This commits adds an option for
s_client to stay loaded until the sesion has been processed. A side effect
of this is that s_client never sends a close_notify in this mode, so we
count success as seeing that data has been transferred.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
When the client reads DH parameters from the TLS stream, we only
checked that they all are non-zero. This change updates the check to
use DH_check_params()
DH_check_params() is a new function for light weight checking of the p
and g parameters:
check that p is odd
check that 1 < g < p - 1
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Add Poly1305 as a "signed" digest.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2128)
... mostly related to some old discarded modules .
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1906)
This enables us to make changes to in-flight TLSv1.3 messages that appear
after the ServerHello.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
Previously SKE in TLSProxy only knew about one anonymous ciphersuite so
there was never a signature. Extend that to include a ciphersuite that is
not anonymous. This also fixes a bug where the existing SKE processing was
checking against the wrong anon ciphersuite value. This has a knock on
impact on the sslskewith0p test. The bug meant the test was working...but
entirely by accident!
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
Enhance find-doc-nits to be better about finding typedefs for
callback functions. Fix all nits it now finds. Added some new
typedef names to ssl.h some of which were documented but did not
exist
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2151)
Also updates TLSProxy to be able to understand the format and parse the
contained extensions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
The previous commit fixed a bug where the EC point formats extensions did
not appear in the ServerHello. This should have been caught by
70-test_sslmessages but that test never tries an EC ciphersuite. This
updates the test to do that.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2153)
find-doc-nits warns if you don't give a "what to do flag"
Don't use regexps for section names, just strings: More consistency.
Rename "COMMAND OPTIONS" to OPTIONS.
Fix a couple of other nit-level things.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2076)
The indentation was a bit off in some of the perl files following the
extensions refactor.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Extend test_tls13messages to additionally check the expected extensions
under different options given to s_client/s_server.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Because extensions were keyed by type which is sparse, we were continually
scanning the list to find the one we wanted. The way we stored them also
had the side effect that we were running initialisers/finalisers in a
different oder to the parsers. In this commit we change things so that we
instead key on an index value for each extension.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
At this stage the message is just empty. We need to fill it in with
extension data.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There are some minor differences in the format of a ServerHello in TLSv1.3.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This updates the record layer to use the TLSv1.3 style nonce construciton.
It also updates TLSProxy and ossltest to be able to recognise the new
layout.
Reviewed-by: Rich Salz <rsalz@openssl.org>
After the client processes the server's initial flight in TLS1.3 it may
respond with either an encrypted, or an unencrypted alert. We needed to
teach TLSProxy about this so that it didn't issue spurious warnings.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Use \b on NOEXIST and EXPORT_VAR_AS_FUNC patterns as suggested by Andy.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1912)
ssl_test_old was reaching inside the SSL structure and changing the internal
BIO values. This is completely unneccessary, and was causing an abort in the
test when enabling TLSv1.3.
I also removed the need for ssl_test_old to include ssl_locl.h. This
required the addition of some missing accessors for SSL_COMP name and id
fields.
Reviewed-by: Rich Salz <rsalz@openssl.org>
- the pod path hadn't been changed with the directory layout change
- apparently, pod2html doesn't add ".html" at the end of links, making
them useless, so we need to fix that
With thanks for the report to Michel <michel.sales@free.fr>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1896)
Prior to TLS1.3 we check that the received record version number is correct.
In TLS1.3 we need to ignore the record version number. This adds a test to
make sure we do it correctly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This works the same way as DSO_pathbyaddr() but instead returns a ptr to
the DSO that contains the provided symbol.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Commit 3d8b2ec42 removed various unused functions. However now we need to
use one of them! This commit resurrects DSO_pathbyaddr(). We're not going to
resurrect the Windows version though because what we need to achieve can be
done a different way on Windows.
Reviewed-by: Tim Hudson <tjh@openssl.org>
We add ssl_cipher_get_overhead() as an internal function, to avoid
having too much ciphersuite-specific knowledge in DTLS_get_data_mtu()
itself. It's going to need adjustment for TLSv1.3... but then again, so
is fairly much *all* of the SSL_CIPHER handling. This bit is in the noise.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Includes addition of the various options to s_server/s_client. Also adds
one of the new TLS1.3 ciphersuites.
This isn't "real" TLS1.3!! It's identical to TLS1.2 apart from the protocol
and the ciphersuite...and the ciphersuite is just a renamed TLS1.2 one (not
a "real" TLS1.3 ciphersuite).
Reviewed-by: Rich Salz <rsalz@openssl.org>
For convenience, combine getting a new ref for the new SSL_CTX
with assigning the store and freeing the old one.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1755)
Move manpages to manX directories
Add Windows/VMS install fix from Richard Levitte
Update README
Fix typo's
Remove some duplicates
Reviewed-by: Richard Levitte <levitte@openssl.org>
In 1.1.0 we only allowed a strictly increasing version number in the *.num
files, i.e. you could never introduce a symbol at the end of the *.num file
with a lower version number than the one preceding it. This made sense for
1.1.0. However in master we may be introducing symbols for backport to
1.1.0. Therefore it is ok in master to have a symbol for version 1.1.0c
coming after a symbol for version 1.1.1.
This commit fixes the check in mkdef.pl to be a bit looser to allow this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Looking for something starting with '-Wl,-rpath,' isn't good enough,
as someone might give something like '-Wl,--enable-new-dtags,-rpath,/PATH'.
Looking for ',-rpath,' should be safe enough.
We could remove the preloading stuff entirely, but just in case the
user has chosen to given RPATH setting arguments at configuration,
we'd better make sure testing will still work. Fair warning, there
are some configuration options that do not work with preloaded OpenSSL
libraries, such as the sanity checking ones.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got
them after the reformat. This is the result of:
find . -name '*.pl' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.c' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.h' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
Then bn_prime.h was excluded since this is a generated file.
Note mkerr.pl has some changes in a heredoc for some help output, but
other lines there lack trailing whitespace too.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This is a regression test for
https://github.com/openssl/openssl/pull/1431. It tests a
maximally-padded record with each possible invalid offset.
This required fixing a bug in Message.pm where the client sending a
fatal alert followed by close_notify was still treated as success.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
OCSP_RESPID was made opaque in 1.1.0, but no accessors were provided for
setting the name/key value for the OCSP_RESPID.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The background story is that util/shlib_wrap.sh was setting LD_PRELOAD
or similar platform dependent variables, just in case the shared
libraries were built with -rpath. Unfortunately, this doesn't work
too well with asan, msan or ubsan.
So, the solution is to forbid the combination of shared libraries,
-rpath and any of the sanity analyzers we can configure.
This changes util/shlib_wrap.sh so it only contains the code that sets
LD_PRELOAD when -rpath has been used when configuring.
Reviewed-by: Rich Salz <rsalz@openssl.org>
They may return if an SCT_signature struct is added in the future that
allows them to be refactored to conform to the i2d/d2i function signature
conventions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
SCT_verify is impossible to call through the public API (SCT_CTX_new() is
not part of the public API), so rename it to SCT_CTX_verify and move it
out of the public API.
SCT_verify_v1 is redundant, since SCT_validate does the same verification
(by calling SCT_verify) and more. The API is less confusing with a single
verification function (SCT_validate).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Declare EC{PK,}PARAMETERS_{new,free} functions in public headers. The
free functions are necessary because EC_GROUP_get_ec{pk,}parameters()
was made public by commit 60b350a3ef ("RT3676: Expose ECgroup i2d
functions").
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
There's no reason we should enumerate every type of IMPLEMENT_ and
DECLARE_ line (and forget the ones we add a little now and then).
They all start with the same first word, let's just take'm all.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Run util/openssl-format-source on ssl/
Some comments and hand-formatted tables were fixed up
manually by disabling auto-formatting.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In one failure case, it used to return -1. That failure case
(CTLOG_new() returning NULL) was not usefully distinct from all of the
other failure cases.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1407)
The macros that produce PEM_write_FOO() andd PEM_read_FOO() only do so
unless 'no-stdio' has been configured. mkdef.pl should mimic that by
marking those functions with the "STDIO" algo.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We mark small comments with a dash immediately following the starting /*.
However, *INDENT-(ON|OFF)* comments shouldn't be treated that way, or
indent will ignore them if we do.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
SSL_set_rbio() and SSL_set_wbio() are new functions in 1.1.0 and really
should be called SSL_set0_rbio() and SSL_set0_wbio(). The old
implementation was not consistent with what "set0" means though as there
were special cases around what happens if the rbio and wbio are the same.
We were only ever taking one reference on the BIO, and checking everywhere
whether the rbio and wbio are the same so as not to double free.
A better approach is to rename the functions to SSL_set0_rbio() and
SSL_set0_wbio(). If an existing BIO is present it is *always* freed
regardless of whether the rbio and wbio are the same or not. It is
therefore the callers responsibility to ensure that a reference is taken
for *each* usage, i.e. one for the rbio and one for the wbio.
The legacy function SSL_set_bio() takes both the rbio and wbio in one go
and sets them both. We can wrap up the old behaviour in the implementation
of that function, i.e. previously if the rbio and wbio are the same in the
call to this function then the caller only needed to ensure one reference
was passed. This behaviour is retained by internally upping the ref count.
This commit was inspired by BoringSSL commit f715c423224.
RT#4572
Reviewed-by: Rich Salz <rsalz@openssl.org>
Simplify BIO init using OPENSSL_zalloc().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1261)
This adds the functions X509_set_proxy_pathlen(), which sets the
internal pc path length cache for a given X509 structure, along with
X509_get_proxy_pathlen(), which retrieves it.
Along with the previously added X509_set_proxy_flag(), this provides
the tools needed to manipulate all the information cached on proxy
certificates, allowing external code to do what's necessary to have
them verified correctly by the libcrypto code.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Since there are a number of function pointers in X509_STORE that might
lead to user code, it makes sense for them to be able to lock the
store while they do their work.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We only add setters for X509_STORE function pointers except for the
verify callback function. The thought is that the function pointers
in X509_STORE_CTX are a cache for the X509_STORE functions.
Therefore, it's preferable if the user makes the changes in X509_STORE
before X509_STORE_CTX_init is called, and otherwise use the verify
callback to override any results from OpenSSL's internal
calculations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Commit aea145e removed some error codes that are generated
algorithmically: mapping alerts to error texts. Found by
Andreas Karlsson. This restores them, and adds two missing ones.
Reviewed-by: Matt Caswell <matt@openssl.org>
Function-like macros are replaced with prototypes and a note
that they are implemented as macros. Constants are just
referenced in-line in the text.
Tweak BIO_TYPE_... documentation.
Also fix RT4592.
Reviewed-by: Matt Caswell <matt@openssl.org>
If application uses any of Windows-specific interfaces, make it
application developer's respondibility to include <windows.h>.
Rationale is that <windows.h> is quite "toxic" and is sensitive
to inclusion order (most notably in relation to <winsock2.h>).
It's only natural to give complete control to the application developer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The previous commit fixed a problem where fragmented alerts would cause an
infinite loop. This commit adds a test for these fragmented alerts.
Reviewed-by: Andy Polyakov <appro@openssl.org>
with "make install -j8" it happens very often that two or more make
instances are creating the same directory in parallel. As a result one
instace creates the directory and second mkdir fails because the
directory exists already (but it did not while testing for it earlier).
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1204)
Add missing entries to NAME section
Add SYNOPSIS lines, remove old NAME entries
Update find-doc-nits; better regexp's for parsing SYNOPSIS sections.
Rename a couple of files to have an API name.
Remove RSA_private_decrypt; it was duplicate content
Update for recent doc additions
Reviewed-by: Matt Caswell <matt@openssl.org>
Before the addition of this function, it was impossible to read the
symmetric key from an EVP_PKEY_HMAC type EVP_PKEY.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1217)
On some platforms we can't startup the TLSProxy due to environmental
problems (e.g. network set up on the build machine). These aren't OpenSSL
problems so we shouldn't treat them as test failures. Just visibly
indicate that we are skipping the test.
We only skip the first time we attempt to start up the proxy. If that works
then everything else should do...if not we should probably investigate and
so report as a failure.
This also removes test_networking...there is a danger that this turns into
a test of user's environmental set up rather than OpenSSL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make d2i_X509 a generic d2i/i2d manpage.
Pull common stuff out of other d2i/i2d docs.
Update find-doc-nits to know about "generic" manpages.
Cleanup some overlap.
Fix up a bunch of other references.
Reviewed-by: Matt Caswell <matt@openssl.org>
The asdf.pod filename must have asdf in its NAME section.
also check for names existing as a different filename (via Levitte)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Also tweaks to find-doc-nits, including name/synopsis checking.
Ironically, it also reports on duplicated doc names :)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove some unused files.
Rename doc-nit-check to be consistent.
Add check for multiple #include in synopsis.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add copyright to missing assembler files.
Add copyrights to missing test/* files.
Add copyrights
Various source and misc files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Trying to use normal perl conditions to conditionally 'use' a perl
module didn't quite work. Using the 'if' module to do so does work.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1079)
As it turns out default glob's behaviour for quoted argument varies
from version to version, making it impossible to Configure or run
tests in some cases. The reason for quoting globs was to accommodate
source path with spaces in its name, which was treated by default glob
as multiple paths. File::Glob::glob on the other hand doesn't consider
spaces as delimiters and therefore works with unquoted patterns.
[Unfortunaltely File::Glob::glob, being too csh-ly, doesn't work
on VMS, hence the "pinning" is conditional.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix some code examples, trailing whitespace
Fix TBA sections in verify, remove others.
Remove empty sections
Use Mixed Case not ALL CAPS in head2
Enhance doc-nits script.
Remove extra =cut line
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename sk_xxx to OPENSSL_sk_xxx and _STACK to OPENSSL_STACK
Rename lh_xxx API to OPENSSL_LH_xxx and LHASH_NODE to OPENSSL_LH_NODE
Make lhash stuff opaque.
Use typedefs for function pointers; makes the code simpler.
Remove CHECKED_xxx macros.
Add documentation; remove old X509-oriented doc.
Add API-compat names for entire old API
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Add doc-nit-check to help find future issues.
Make podchecker be almost clean.
Remove trailing whitespace.
Tab expansion
Reviewed-by: Richard Levitte <levitte@openssl.org>
- Adjust mkerr.pl to produce the line length we used for source
reformating.
- Have mkerr.pl keep track of preprocessor directive indentation
Among others, do not spuriously throw away a #endif at the end of
header files.
- Make sure mkerr.pl specifies any header inclusion correctly
Reviewed-by: Rich Salz <rsalz@openssl.org>
Workaround an apparent IO:Socket::IP bug where a seemingly valid
server socket is being returned even though a valid connection does not
exist. This causes the tests to intermittently hang. We additionally check
that the peerport looks ok to verify that the returned socket looks usable.
Reviewed-by: Richard Levitte <levitte@openssl.org>
OpenSSL 1.1.0-pre5 has made some additional structs opaque. Python's ssl
module requires access to some of the struct members. Three new getters
are added:
int X509_OBJECT_get_type(X509_OBJECT *a);
STACK_OF(X509_OBJECT) *X509_STORE_get0_objects(X509_STORE *v);
X509_VERIFY_PARAM *X509_STORE_get0_param(X509_STORE *ctx);
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add X509_STORE_{set,get}_ex_data() function and
X509_STORE_get_ex_new_index() macro.
X509_STORE has ex_data and the documentation also mentions them but they
are not actually implemented.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The no-dsa option was failing on Windows because some symbols were not
correctly flagged in libcrypto.num. Problem found due to the new symbol
consistency test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
no-cmac was failing on Windows/VMS due to libcrypto.num not marking the
CMAC functions properly. Found due to the new symbol consistency test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Link errors were occurring on Windows because the header files were not
correctly guarding some functions with OPENSSL_NO_SOCK
Reviewed-by: Rich Salz <rsalz@openssl.org>
Link errors were occurring on Windows because the header files were not
correctly guarding some functions with OPENSSL_NO_DGRAM
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add copyright to most .pl files
This does NOT cover any .pl file that has other copyright in it.
Most of those are Andy's but some are public domain.
Fix typo's in some existing files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make OBJ_name_cmp internal
Rename idea_xxx to IDEA_xxx
Rename get_rfc_xxx to BN_get_rfc_xxx
Rename v3_addr and v3_asid functions to X509v3_...
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make X509_OBJECT, X509_STORE_CTX, X509_STORE, X509_LOOKUP,
and X509_LOOKUP_METHOD opaque.
Remove unused X509_CERT_FILE_CTX
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
libssl needs to have access to some internal libcrypto symbols.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add an accessor for SSL_CTX.
Since libssl was made opaque, there is no way for users to access the
cipher_list, while users can set the cipher_list by
SSL_CTX_set_cipher_list().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Numerous fixups based on feedback of the DSA opacity changes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
BIO_f_linebuffer() is now built by default instead of just on VMS, but
the prototype in the header was still only available on VMS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead of have every DSO_METHOD_xxx in all platforms, ensure that only
one DSO_METHOD_openssl is available on all platforms.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The mk1mf build for the VC-WIN* targets is broken and the unified
scheme works well enough, so we clean out the old.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
mkdef.pl was not detecting no-comp functions. This updates the header file
so that mkdef.pl detects that no-comp applies, and the functions are marked
accordingly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In most builds, we can assume that engines live in the build tree
subdirectory "engines". This was hard coded into the tests that use
the engine ossltest.
However, that hard coding is tedious, it would need to be done in
every test recipe, and it's an incorrect assumption in some cases.
This change has us play it safe and let the build files tell the
testing framework where the engines are.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
TLSProxy starts s_server and specifies the number of client connects
it should expect. After that s_server is supposed to close down
automatically. However, if another test is then run then TLSProxy
will start a new instance of s_server. If the previous instance
hasn't closed down yet then the new instance can fail to bind to
the socket.
Reviewed-by: Richard Levitte <levitte@openssl.org>
no-ripemd was unified a while ago but the change was not done in mk1mf.pl. This commit changes the no-ripemd string to no-rmd160 which fixes the no-rmd160 classic build.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove 'log' field from SCT and related accessors
In order to still have access to an SCT's CTLOG when calling SCT_print,
SSL_CTX_get0_ctlog_store has been added.
Improved documentation for some CT functions in openssl/ssl.h.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Both of these functions can easily be implemented by callers instead.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
If there is cause to think LD_LIBRARY_PATH_32 and LD_PRELOAD_32 are
appropriate variables to touch, do so. Otherwise, touch the usual
LD_LIBRARY_PATH and LD_PRELOAD. This covers for older installations
that don't have a mix of 32-bit and 64-bit libs.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This is similar to SSL_pending() but just returns a 1 if there is data
pending in the internal OpenSSL buffers or 0 otherwise (as opposed to
SSL_pending() which returns the number of bytes available). Unlike
SSL_pending() this will work even if "read_ahead" is set (which is the
case if you are using read pipelining, or if you are doing DTLS). A 1
return value means that we have unprocessed data. It does *not* necessarily
indicate that there will be application data returned from a call to
SSL_read(). The unprocessed data may not be application data or there
could be errors when we attempt to parse the records.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
