Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
(Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.
Reviewed-by: Richard Levitte <levitte@openssl.org>
DTLS cookie generation and verification were exact copies of each
other save the last few lines. This refactors them to avoid code
copying.
Reviewed-by: Matt Caswell <matt@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
s_server was trying to set the ECDH curve when no-ec was defined. This also
highlighted the fact that the -no_ecdhe option to s_server is broken, and
doesn't make any sense any more (ECDHE is on by default and the only way it
can be disabled is through the cipherstring). Therefore this commit removes
the option.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
When processing a public key input via "-pubin", "private" was
sometimes erroneously set, or else not set and incorrectly asserted.
Reviewed-by: Rich salz <rsalz@openssl.org>
This change required some special treatment, as HMAC is intertwined
with EVP_MD. For now, all local HMAC_CTX variables MUST be
initialised with HMAC_CTX_EMPTY, or whatever happens to be on the
stack will be mistaken for actual pointers to EVP_MD_CTX. This will
change as soon as HMAC_CTX becomes opaque.
Also, since HMAC_CTX_init() can fail now, its return type changes from
void to int, and it will return 0 on failure, 1 on success.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In theory the pthreads approach for Thread Local Storage should be more
portable.
This also changes some APIs in order to accommodate this change. In
particular ASYNC_init_pool is renamed ASYNC_init_thread and
ASYNC_free_pool is renamed ASYNC_cleanup_thread. Also introduced ASYNC_init
and ASYNC_cleanup.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If an async event occurs during a renegotiation in SSL_read then s_server
was looping around, detecting we were in init and calling
init_ssl_connection instead of re-calling SSL_read.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Initial API implemented for notifying applications that an ASYNC_JOB
has completed. Currently only s_server is using this. The Dummy Async
engine "cheats" in that it notifies that it has completed *before* it
pauses the job. A normal async engine would not do that.
Only the posix version of this has been implemented so far, so it will
probably fail to compile on Windows at the moment.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It is expensive to create the ASYNC_JOB objects due to the "makecontext"
call. This change adds support for pools of ASYNC_JOB objects so that we
don't have to create a new ASYNC_JOB every time we want to use one.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The s_server option -WWW was not async aware, and therefore was not
handling SSL_ERROR_WANT_ASYNC conditions. This commit fixes that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A new -async option is added which activates SSL_MODE_ASYNC. Also
SSL_WANT_ASYNC errors are handled appropriately.
Reviewed-by: Rich Salz <rsalz@openssl.org>
SSL_state has been replaced by SSL_get_state and SSL_set_state is no longer
supported.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
s_server was (ab)using SSL_set_state to force a renegotiation. This is a
bad way to do things and does not work with the new state machine code, so
we need to do it a different way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Clean up and remove lots of code that is now no longer needed due to the
move to the new state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Check for Host header in query_responder instead of process_responder. This
also fixes a memory leak in the old code if the headers was NULL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
When using command line applications errors occur when trying to
load engines specified in a config file. Introduced by commit
a0a82324f9
RT#4093
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Previous OpenSSL versions used -set_serial, but master was using
-set-serial - so rename it back to the old version.
RT#4059
Reviewed-by: Richard Levitte <levitte@openssl.org>
Loading the config file after processing command line options can
cause problems, e.g. where an engine provides new ciphers/digests
these are not then recoginised on the command line. Move the
default config file loading to before the command line option
processing. Whilst we're doing this we might as well centralise
this instead of doing it individually for each application. Finally
if we do it before the OpenSSL_add_ssl_algorithms() call then
ciphersuites provided by an engine (e.g. GOST) can be available to
the apps.
RT#4085
RT#4086
Reviewed-by: Richard Levitte <levitte@openssl.org>
There used to be options -macopt and -sigopt in <=1.0.2 for the dgst
command line app. These were incorrectly spelled as -macop and -sigop in
master.
RT#4072
Reviewed-by: Andy Polyakov <appro@openssl.org>
Note that this commit constifies a user callback parameter and therefore
will break compilation for applications using this callback. But unless
they are abusing write access to the buffer, the fix is trivial.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Even though SOCKET is effectively declared as (void *) on Windows, it's
not actually a pointer, but an index within per-process table of
kernel objects. The table size is actually limited and its upper limit
is far below upper limit for signed 32-bit integer. This is what makes
cast in question possible.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
For those command line options that take the verification options
-CApath and -CAfile, if those options are absent then the default path or
file is used instead. It is not currently possible to specify *no* path or
file at all. This change adds the options -no-CApath and -no-CAfile to
specify that the default locations should not be used to all relevant
applications.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Use sockaddr_storage not sockaddr for the client IP address to allow for
IPv6.
Also fixed a section of code which was conditional on OPENSSL_NO_DTLS1
which should not have been.
Reviewed-by: Andy Polyakov <appro@openssl.org>
DTLSv1_listen is a commonly used function within DTLS solutions for
listening for new incoming connections. This commit adds support to s_server
for using it.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The -srpvfile option was broken in the srp command line app. Using it would
always result in "-dbfile and -configfile cannot be specified together."
The error message is also wrong because the option is "-srpvfile" not
"-dbfile", so that has been fixed too.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Have a look at the directories in crypto/, I found reason to add
checks on CMAC and HMAC. This might be completely irrelevant, but I
prefered covering too much than not enough.
Reviewed-by: Stephen Henson <steve@openssl.org>
A grep of OPENSSL_NO_ in the rest of the source tree revealed a few
more features to check.
NOTE: there are some of those macros that I ignore because a check of
them doesn't seem useful to external apps. This might change later on.
Reviewed-by: Stephen Henson <steve@openssl.org>
After a grep of OPENSSL_NO_ in apps/*.c, a few more features that may
be interesting to check the availability of came up.
Reviewed-by: Stephen Henson <steve@openssl.org>
New option "openssl list -disabled" this lists a set of disabled features
in a form which can be conveniently parsed by the test framework so it
knows which tests to skip.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If the field separator isn't specified through -nameopt then use
XN_FLAG_SEP_CPLUS_SPC instead of printing nothing and returing an error.
PR#2397
Reviewed-by: Tim Hudson <tjh@openssl.org>
Both now warn once if directory isn't writeable.
Both now warn on file-write errors (multiple times).
Update manpage to describe both program and script correctly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
On Unix/Linux platforms, merge c_rehash script into openssl as a
C program.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
To set both the incoming and outgoing data when 'encrypting' or
'decrypting' to FORMAT_BASE64 wasn't quite the right thing to do.
Reviewed-by: Tim Hudson <tjh@openssl.org>
If the output to stdout or the input from stdin is meant to be binary,
it's deeply unsetting to get the occasional LF converted to CRLF or
the other way around. If someone happens to forget to redirect stdin
or stdout, they will get gibberish anyway, line ending conversion will
not change that.
Therefore, let's not have dup_bio_* decide unilaterally what mode the
BIO derived from stdin and stdout, and rather let the app decide by
declaring the intended format.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could be confusing if
two different apps were handling the same type of file in different ways.
The solution is to centralise the decision of low level file organisation,
and that the apps would use a selection of formats to state the intent of
the file.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Most of all, we needed to sort out which ones are binary and which
ones are text, and make sure they are treated accordingly and
consistently so
Reviewed-by: Tim Hudson <tjh@openssl.org>
Most of the accessors existed and were already used so it was easy.
TS_VERIFY_CTX didn't have accessors/settors so I added the simple and
obvious ones, and changed the app to use them. Also, within crypto/ts,
replaced the functions with direct access to the structure members
since we generally aren't opaque within a directory.
Also fix RT3901.
Reviewed-by: Tim Hudson <tjh@openssl.org>
In some environments, such as firmware, the current system time is entirely
meaningless. Provide a clean mechanism to suppress the checks against it.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
This does 64-bit division and multiplication, and on 32-bit platforms
pulls in libgcc symbols (and MSVC does similar) which may not be
available. Mostly done by David Woodhouse.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
clang suggests %llu instead, but it isn't clear that is portable on
all platforms.
C99 and above define a handy macro for us, so we try to use that
definition and fall back to current definition if needed (though we
switch to 'u' for unsigned).
Reviewed-by: Matt Caswell <matt@openssl.org>
Remove asn1-kludge option from the req utility. It was a decade old
workaround for CAs and software which required an invalid encoding
of PKCS#10 certificate requests: omitting the attributes field even
though it is not OPTIONAL.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This was obsolete in 2001. This is not the same as Gost94 digest.
Thanks to Dmitry Belyavsky <beldmit@gmail.com> for review and advice.
Reviewed-by: Matt Caswell <matt@openssl.org>
Add Host Header in OCSP query if no host header is set via -header
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Ben Laurie <ben@openssl.org>
The -use_srtp s_client/s_server option is supposed to take a colon
separated string as an argument. In master this was incorrectly set to
expect a filename.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Thanks folks:
348 Benjamin Kaduk
317 Christian Brueffer
254 Erik Tews
253 Erik Tews
219 Carl Mehner
155 (ghost)
95 mancha
51 DominikNeubauer
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
The -show_chain flag to the verify command line app shows information about
the chain that has been built. This commit adds the text "untrusted" against
those certificates that have been used from the untrusted list.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There's no reason why we should default to a output format that is
old, and confusing in some cases.
This affects the commands "ca", "crl", "req" and "x509".
Reviewed-by: Rich Salz <rsalz@openssl.org>
When generating a private key, try to make the output file be readable
only by the owner. Put it in CHANGES file since it might be noticeable.
Add "int private" flag to apps that write private keys, and check that it's
set whenever we do write a private key. Checked via assert so that this
bug (security-related) gets fixed. Thanks to Viktor for help in tracing
the code-paths where private keys are written.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
