This is a workaround so old that nobody remembers what buggy clients
it was for. It's also been broken in stable branches for two years and
nobody noticed (see
https://boringssl-review.googlesource.com/#/c/1694/).
Reviewed-by: Tim Hudson <tjh@openssl.org>
For librypto to be complete, the stuff in both crypto/ and engines/
have to be built. Doing 'make test' or 'make apps' from a clean
source tree failed to do so.
Corrected by using the new 'build_libcrypto' in the top Makefile.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Here are the "rules" for handling flags that depend on #ifdef:
- Do not ifdef the enum. Only ifdef the OPTIONS table. All ifdef'd
entries appear at the end; by convention "engine" is last. This
ensures that at run-time, the flag will never be recognized/allowed.
The next two bullets entries are for silencing compiler warnings:
- In the while/switch parsing statement, use #ifdef for the body to
disable it; leave the "case OPT_xxx:" and "break" statements outside
the ifdef/ifndef. See ciphers.c for example.
- If there are multiple options controlled by a single guard, OPT_FOO,
OPT_BAR, etc., put a an #ifdef around the set, and then do "#else"
and a series of case labels and a break. See OPENSSL_NO_AES in cms.c
for example.
Reviewed-by: Matt Caswell <matt@openssl.org>
The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.
Reviewed-by: Stephen Henson <steve@openssl.org>
Create app_load_config(), a routine to load config file. Remove the
"always load config" from the main app. Change the places that used to
load config to call the new common routine.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add support for PKCS#8 private key encryption using the scrypt algorithm
in the pkcs8 utility. Update documentation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This adds a new function which will encrypt a private key using PKCS#8
based on an X509_ALGOR structure and reimplements PKCS8_encrypt to use it.
Update pkcs8 utlity to use PKCS8_set0_pbe.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The "out" variable is used for both key and csr. Close it after
writing the first one so it can be re-used when writing the other.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore it is being removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in. This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.
This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Typedef STRINT_PAIR to be the same as OPT_PAIR, and use that structure and
a bunch of tables instead of switch statements to lookup various values
out of the SSL/TLS message buffers. Shrinks a bunch of code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Following the version negotiation rewrite all of the previous code that was
dedicated to version negotiation can now be deleted - all six source files
of it!!
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Continuing from the previous commit this changes the way we do client side
version negotiation. Similarly all of the s23* "up front" state machine code
has been avoided and again things now work much the same way as they already
did for DTLS, i.e. we just do most of the work in the
ssl3_get_server_hello() function.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
This commit changes the way that we do server side protocol version
negotiation. Previously we had a whole set of code that had an "up front"
state machine dedicated to the negotiating the protocol version. This adds
significant complexity to the state machine. Historically the justification
for doing this was the support of SSLv2 which works quite differently to
SSLv3+. However, we have now removed support for SSLv2 so there is little
reason to maintain this complexity.
The one slight difficulty is that, although we no longer support SSLv2, we
do still support an SSLv3+ ClientHello in an SSLv2 backward compatible
ClientHello format. This is generally only used by legacy clients. This
commit adds support within the SSLv3 code for these legacy format
ClientHellos.
Server side version negotiation now works in much the same was as DTLS,
i.e. we introduce the concept of TLS_ANY_VERSION. If s->version is set to
that then when a ClientHello is received it will work out the most
appropriate version to respond with. Also, SSLv23_method and
SSLv23_server_method have been replaced with TLS_method and
TLS_server_method respectively. The old SSLv23* names still exist as
macros pointing at the new name, although they are deprecated.
Subsequent commits will look at client side version negotiation, as well of
removal of the old s23* code.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Follow the same convention the other OPENSSL_NO_xxx header files
do, and use #error instead of making the header file be a no-op.
Reviewed-by: Matt Caswell <matt@openssl.org>
Remove RFC2712 Kerberos support from libssl. This code and the associated
standard is no longer considered fit-for-purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove Kerberos related options from the apps to prepare for the
subsequent commits which will remove libcrypto and libssl support for
Kerberos.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For the various string-compare routines (strcmp, strcasecmp, str.*cmp)
use "strcmp()==0" instead of "!strcmp()"
Reviewed-by: Tim Hudson <tjh@openssl.org>
The file name given to -CAserial might not exist yet. The
-CAcreateserial option decides if this is ok or not.
Previous to this change, -CAserial was a type '<' option, and in that
case, the existence of the file given as argument is tested quite
early, and is a failure if it doesn't. With the type 's' option, the
argument is just a string that the application can do whatever it
wants with.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Compiling OpenSSL code with MSVC and /W4 results in a number of warnings.
One category of warnings is particularly interesting - C4701 (potentially
uninitialized local variable 'name' used). This warning pretty much means
that there's a code path which results in uninitialized variables being used
or returned. Depending on compiler, its options, OS, values in registers
and/or stack, the results can be nondeterministic. Cases like this are very
hard to debug so it's rational to fix these issues.
This patch contains a set of trivial fixes for all the C4701 warnings (just
initializing variables to 0 or NULL or appropriate error code) to make sure
that deterministic values will be returned from all the execution paths.
RT#3835
Signed-off-by: Matt Caswell <matt@openssl.org>
Matt's note: All of these appear to be bogus warnings, i.e. there isn't
actually a code path where an unitialised variable could be used - its just
that the compiler hasn't been able to figure that out from the logic. So
this commit is just about silencing spurious warnings.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy. Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If CA.pl is reading from /dev/null, then "chop $FILE" gives a warning.
Sigh. Have to add "if $FILE". This just silences a build warning.
Thanks to GitHub user andrejs-igumenovs for help with this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
RT2943 only complains about the incorrect check of -K argument size,
we might as well do the same thing with the -iv argument.
Before this, we only checked that the given argument wouldn't give a
bitstring larger than EVP_MAX_KEY_LENGTH. we can be more precise and
check against the size of the actual cipher used.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't do access check on destination directory; it breaks when euid/egid
is different from real uid/gid.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Signed-off-by: Rich Salz <rsalz@akamai.com>
After the finale, the "real" final part. :) Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Don't check for NULL before calling free functions. This gets:
ERR_STATE_free
ENGINE_free
DSO_free
CMAC_CTX_free
COMP_CTX_free
CONF_free
NCONF_free NCONF_free_data _CONF_free_data
A sk_free use within OBJ_sigid_free
TS_TST_INFO_free (rest of TS_ API was okay)
Doc update for UI_free (all uses were fine)
X509V3_conf_free
X509V3_section_free
X509V3_string_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reformat CA.pl.in to follow coding style.
Also add "use strict" and "use warnings"
Also modify it to exit properly and report only when succeeded.
And some perl tweaks via Richard.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This gets BN_.*free:
BN_BLINDING_free BN_CTX_free BN_FLG_FREE BN_GENCB_free
BN_MONT_CTX_free BN_RECP_CTX_free BN_clear_free BN_free BUF_MEM_free
Also fix a call to DSA_SIG_free to ccgost engine and remove some #ifdef'd
dead code in engines/e_ubsec.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The various implementations of EVP_CTRL_AEAD_TLS_AAD expect a buffer of at
least 13 bytes long. Add sanity checks to ensure that the length is at
least that. Also add a new constant (EVP_AEAD_TLS1_AAD_LEN) to evp.h to
represent this length. Thanks to Kevin Wojtysiak (Int3 Solutions) and
Paramjot Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add OPENSSL_clear_free which merges cleanse and free.
(Names was picked to be similar to BN_clear_free, etc.)
Removed OPENSSL_freeFunc macro.
Fixed the small simple ones that are left:
CRYPTO_free CRYPTO_free_locked OPENSSL_free_locked
Reviewed-by: Richard Levitte <levitte@openssl.org>
No point in proceeding if you're out of memory. So change
*all* OPENSSL_malloc calls in apps to use the new routine which
prints a message and exits.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't check for NULL before calling a free routine. This gets X509_.*free:
x509_name_ex_free X509_policy_tree_free X509_VERIFY_PARAM_free
X509_STORE_free X509_STORE_CTX_free X509_PKEY_free
X509_OBJECT_free_contents X509_LOOKUP_free X509_INFO_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
Do not check for NULL before calling a free routine. This addresses:
ASN1_BIT_STRING_free ASN1_GENERALIZEDTIME_free ASN1_INTEGER_free
ASN1_OBJECT_free ASN1_OCTET_STRING_free ASN1_PCTX_free ASN1_SCTX_free
ASN1_STRING_clear_free ASN1_STRING_free ASN1_TYPE_free
ASN1_UTCTIME_free M_ASN1_free_of
Reviewed-by: Richard Levitte <levitte@openssl.org>
The big apps cleanup broke the windows build. This commit
fixes some miscellaneous issues so that it builds again.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Remove need for multiple arrays, parse the X509 name
one RDN at a time. Thanks to Andy for careful review.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Many functions had a BIO* parameter, and it was always called
with bio_err. Remove the param and just use bio_err.
Reviewed-by: Matt Caswell <matt@openssl.org>
A variable declaration got dropped during a merge.
And if a compiler inlines strcmp() and you put a strcmp in an
assert message, the resultant stringification exceeds ANSI string
limits.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
There's a new "list" command, which takes a flag to say what
to list. Removing the old hacky commands. Re-ordered some
functions to remove some needless declarations.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make setup_engine be a dummy if NO_ENGINE is enabled.
The option is not enabled if NO_ENGINE is enabled, so the one "wasted"
variable just sits there. Removes some variables and code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt. Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that. There have been many other changes and code-cleanup, see
bullet list below.
Special thanks to Matt for the long and detailed code review.
TEMPORARY:
For now, comment out CRYPTO_mem_leaks() at end of main
Tickets closed:
RT3515: Use 3DES in pkcs12 if built with no-rc2
RT1766: s_client -reconnect and -starttls broke
RT2932: Catch write errors
RT2604: port should be 'unsigned short'
RT2983: total_bytes undeclared #ifdef RENEG
RT1523: Add -nocert to fix output in x509 app
RT3508: Remove unused variable introduced by b09eb24
RT3511: doc fix; req default serial is random
RT1325,2973: Add more extensions to c_rehash
RT2119,3407: Updated to dgst.pod
RT2379: Additional typo fix
RT2693: Extra include of string.h
RT2880: HFS is case-insensitive filenames
RT3246: req command prints version number wrong
Other changes; incompatibilities marked with *:
Add SCSV support
Add -misalign to speed command
Make dhparam, dsaparam, ecparam, x509 output C in proper style
Make some internal ocsp.c functions void
Only display cert usages with -help in verify
Use global bio_err, remove "BIO*err" parameter from functions
For filenames, - always means stdin (or stdout as appropriate)
Add aliases for -des/aes "wrap" ciphers.
*Remove support for IISSGC (server gated crypto)
*The undocumented OCSP -header flag is now "-header name=value"
*Documented the OCSP -header flag
Reviewed-by: Matt Caswell <matt@openssl.org>
With no more symlinks, there's no need for those variables, or the links
target. This also goes for all install: and uninstall: targets that do
nothing but copy $(EXHEADER) files, since that's now taken care of by the
top Makefile.
Also, removed METHTEST from test/Makefile. It looks like an old test that's
forgotten...
Reviewed-by: Rich Salz <rsalz@openssl.org>
EVP_.*free; this gets:
EVP_CIPHER_CTX_free EVP_PKEY_CTX_free EVP_PKEY_asn1_free
EVP_PKEY_asn1_set_free EVP_PKEY_free EVP_PKEY_free_it
EVP_PKEY_meth_free; and also EVP_CIPHER_CTX_cleanup
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets DH_free, DSA_free, RSA_free
Reviewed-by: Matt Caswell <matt@openssl.org>
Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets ASN1_OBJECT_free and ASN1_STRING_free.
Reviewed-by: Matt Caswell <matt@openssl.org>
Ensure that all libssl functions called from within the apps have their
return values checked where appropriate.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Some miscellaneous removal of dead code from apps. Also fix an issue with
error handling with pkcs7.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Passing a negative value for the "-time" option to s_time results in a seg
fault. This commit fixes it so that time has to be greater than 0.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Move memory allocation failure checks closer to the site of the malloc in
dgst app. Only a problem if the debug flag is set...but still should be
fixed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Miscellaneous unchecked malloc fixes. Also fixed some mem leaks on error
paths as I spotted them along the way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
X509_V_FLAG_NO_ALT_CHAINS flag. Using this option means that when building
certificate chains, the first chain found will be the one used. Without this
flag, if the first chain found is not trusted then we will keep looking to
see if we can build an alternative chain instead.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Specifically, an ASN.1 NumericString in the certificate CN will fail UTF-8 conversion
and result in a negative return value, which the "x509 -checkhost" command-line option
incorrectly interpreted as success.
Also update X509_check_host docs to reflect reality.
Thanks to Sean Burford (Google) for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Free up bio_err after memory leak data has been printed to it.
In int_free_ex_data if ex_data is NULL there is nothing to free up
so return immediately and don't reallocate it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Disabling HMAC doesn't work. If it did it would end up disabling a lot of
OpenSSL functionality (it is required for all versions of TLS for example).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Includes VMS fixes from Richard.
Includes Kurt's destest fixes (RT 1290).
Closes tickets 1290 and 1291
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
An expired IETF Internet-Draft (seven years old) that nobody
implements, and probably just as good as NSA DRBG work.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove support for SHA0 and DSS0 (they were broken), and remove
the ability to attempt to build without SHA (it didn't work).
For simplicity, remove the option of not building various SHA algorithms;
you could argue that SHA_224/256/384/512 should be kept, since they're
like crypto algorithms, but I decided to go the other way.
So these options are gone:
GENUINE_DSA OPENSSL_NO_SHA0
OPENSSL_NO_SHA OPENSSL_NO_SHA1
OPENSSL_NO_SHA224 OPENSSL_NO_SHA256
OPENSSL_NO_SHA384 OPENSSL_NO_SHA512
Reviewed-by: Richard Levitte <levitte@openssl.org>
The following compile options (#ifdef's) are removed:
OPENSSL_NO_BIO OPENSSL_NO_BUFFER OPENSSL_NO_CHAIN_VERIFY
OPENSSL_NO_EVP OPENSSL_NO_FIPS_ERR OPENSSL_NO_HASH_COMP
OPENSSL_NO_LHASH OPENSSL_NO_OBJECT OPENSSL_NO_SPEED OPENSSL_NO_STACK
OPENSSL_NO_X509 OPENSSL_NO_X509_VERIFY
This diff is big because of updating the indents on preprocessor lines.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This removes all code surrounded by '#ifdef undef'
One case is left: memmove() replaced by open-coded for loop,
in crypto/stack/stack.c That needs further review.
Also removed a couple of instances of /* dead code */ if I saw them
while doing the main removal.
Reviewed-by: Matt Caswell <matt@openssl.org>
Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
Remove MS_STATIC; it's a relic from platforms <32 bits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Use setbuf(fp, NULL) instead of setvbuf(). This removes some
ifdef complexity because all of our platforms support setbuf.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Sometimes it fails to format them very well, and sometimes it corrupts them!
This commit moves some particularly problematic ones.
Reviewed-by: Tim Hudson <tjh@openssl.org>
OPENSSL_NO_RIPEMD160, OPENSSL_NO_RIPEMD merged into OPENSSL_NO_RMD160
OPENSSL_NO_FP_API merged into OPENSSL_NO_STDIO
Two typo's on #endif comments fixed:
OPENSSL_NO_ECB fixed to OPENSSL_NO_OCB
OPENSSL_NO_HW_SureWare fixed to OPENSSL_NO_HW_SUREWARE
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add INSTALLDIRS variable, list of directories where things get
installed. Change install_html_docs to use perl mkdir-p script.
Add uninstall, uninstall_sw, uninstall_docs, uninstall_html_docs
to Makefile.org. The actions of these targets were figured out
by "inverting" the install target.
Recurse into subdirs to do uninstall as needed. Added uninstall
targets whose actions were similarly figured out by "inverting"
the install target.
Also remove some 'space before tab' complaints in Makefile.org
Reviewed-by: Tim Hudson <tjh@openssl.org>
Some Makefiles had actions for "dclean" that really belonged
to the "clean" target. This is wrong because clean ends up,
well, not really cleaning everything.
Reviewed-by: Richard Levitte <levitte@openssl.org>
and UDP header) when setting an mtu. This constant is not always correct (e.g.
if using IPv6). Use the new DTLS_CTRL functions instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
When using the -xcert option to test certificate validity print out
if we pass Suite B compliance. We print out "not tested" if we aren't
in Suite B mode.
Reviewed-by: Matt Caswell <matt@openssl.org>
If no keyfile has been specified use the certificate file instead.
Fix typo: we need to check the chain is not NULL, not the chain file.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 786370b1b0)
When no-ssl3 is set only make SSLv3 disabled by default. Retain -ssl3
options for s_client/s_server/ssltest.
When no-ssl3-method is set SSLv3_*method() is removed and all -ssl3
options.
We should document this somewhere, e.g. wiki, FAQ or manual page.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The trial division and probable prime with coprime tests are disabled
on WIN32 builds because they use internal functions not exported from
the WIN32 DLLs.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The following #ifdef tests were all removed:
__MWERKS__
MAC_OS_pre_X
MAC_OS_GUSI_SOURCE
MAC_OS_pre_X
OPENSSL_SYS_MACINTOSH_CLASSIC
OPENSSL_SYS_MACOSX_RHAPSODY
Reviewed-by: Andy Polyakov <appro@openssl.org>
This is a more comprehensive fix. It changes all
keygen apps to use 2K keys. It also changes the
default to use SHA256 not SHA1. This is from
Kurt's upstream Debian changes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Instead of SSL_CTX_set_custom_cli_ext and SSL_CTX_set_custom_srv_ext
use SSL_CTX_add_client_custom_ext and SSL_CTX_add_server_custom_ext.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Support separate parse and add callback arguments.
Add new callback so an application can free extension data.
Change return value for send functions so < 0 is an error 0
omits extension and > 0 includes it. This is more consistent
with the behaviour of other functions in OpenSSL.
Modify parse_cb handling so <= 0 is an error.
Make SSL_CTX_set_custom_cli_ext and SSL_CTX_set_custom_cli_ext argument
order consistent.
NOTE: these changes WILL break existing code.
Remove (now inaccurate) in line documentation.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Use "parse" and "add" for function and callback names instead of
"first" and "second".
Change arguments to callback so the extension type is unsigned int
and the buffer length is size_t. Note: this *will* break existing code.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Update the dgst.pod page to include SHA224...512 algorithms.
Update apps/progs.pl to add them to the digest command table.
Reviewed-by: Tim Hudson <tjh@cryptosoft.com>
Reduces number of silly casts in OpenSSL code and likely most
applications. Consistent with (char *) for "peername" value from
X509_check_host() and X509_VERIFY_PARAM_get0_peername().
If CSR verify fails in ca utility print out error messages.
Otherwise some errors give misleading output: for example
if the key size exceeds the library limit.
PR#2875
Add certificates if -nocerts and -certfile specified when signing
in smime application. This can be used this to specify the
order certificates appear in the PKCS#7 structure: some broken
applications require a certain ordering.
PR#3316
The "-unix <path>" argument allows s_server and s_client to use a unix
domain socket in the filesystem instead of IPv4 ("-connect", "-port",
"-accept", etc). If s_server exits gracefully, such as when "-naccept"
is used and the requested number of SSL/TLS connections have occurred,
then the domain socket file is removed. On ctrl-C, it is likely that
the stale socket file will be left over, such that s_server would
normally fail to restart with the same arguments. For this reason,
s_server also supports an "-unlink" option, which will clean up any
stale socket file before starting.
If you have any reason to want encrypted IPC within an O/S instance,
this concept might come in handy. Otherwise it just demonstrates that
there is nothing about SSL/TLS that limits it to TCP/IP in any way.
(There might also be benchmarking and profiling use in this path, as
unix domain sockets are much lower overhead than connecting over local
IP addresses).
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
There are certainly many more constifiable strings in the various
interfaces, which I hope to get to eventually.
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Use bufsiz - 1 not BUFSIZ - 1 when prompting for a password in
the openssl utility.
Thanks to Rob Mackinnon, Leviathan Security for reporting this issue.
New function ssl_cipher_disabled.
Check for disabled client ciphers using ssl_cipher_disabled.
New function to return only supported ciphers.
New option to ciphers utility to print only supported ciphers.
Add auto DH parameter support. This is roughly equivalent to the
ECDH auto curve selection but for DH. An application can just call
SSL_CTX_set_auto_dh(ctx, 1);
and appropriate DH parameters will be used based on the size of the
server key.
Unlike ECDH there is no way a peer can indicate the range of DH parameters
it supports. Some peers cannot handle DH keys larger that 1024 bits for
example. In this case if you call:
SSL_CTX_set_auto_dh(ctx, 2);
Only 1024 bit DH parameters will be used.
If the server key is 7680 bits or more in size then 8192 bit DH parameters
will be used: these will be *very* slow.
The old export ciphersuites aren't supported but those are very
insecure anyway.
Add option to set an alternative to the default hmacWithSHA1 PRF
for PKCS#8 private key encryptions. This is used automatically
by PKCS8_encrypt if the nid specified is a PRF.
Add option to pkcs8 utility.
Update docs.
(cherry picked from commit b60272b01f)
Windows 8 SDKs complain that GetVersion() is deprecated.
We only use GetVersion like this:
(GetVersion() < 0x80000000)
which checks if the Windows version is NT based. Use a macro check_winnt()
which uses GetVersion() on older SDK versions and true otherwise.
New flags to build certificate chains. The can be used to rearrange
the chain so all an application needs to do is add all certificates
in arbitrary order and then build the chain to check and correct them.
Add verify error code when building chain.
Update docs.
If you use "-newkey rsa" it's supposed to read the default number of bits from the
config file. However the value isn't used to generate the key, but it does
print it's generating such a key. The set_keygen_ctx() doesn't call
EVP_PKEY_CTX_set_rsa_keygen_bits() and you end up with the default set in
pkey_rsa_init() (1024). Afterwards the number of bits gets read from the config
file, but nothing is done with that anymore.
We now read the config first and use the value from the config file when no size
is given.
PR: 2592
If multiple TLS extensions are expected but not received, the TLS extension and supplemental data 'generate' callbacks are the only chance for the receive-side to trigger a specific TLS alert during the handshake.
Removed logic which no-op'd TLS extension generate callbacks (as the generate callbacks need to always be called in order to trigger alerts), and updated the serverinfo-specific custom TLS extension callbacks to track which custom TLS extensions were received by the client, where no-ops for 'generate' callbacks are appropriate.
Experimental support for encrypt then mac from
draft-gutmann-tls-encrypt-then-mac-02.txt
To enable it set the appropriate extension number (0x10 for the test server)
using e.g. -DTLSEXT_TYPE_encrypt_then_mac=0x10
For non-compliant peers (i.e. just about everything) this should have no
effect.
Removed prior audit proof logic - audit proof support was implemented using the generic TLS extension API
Tests exercising the new supplemental data registration and callback api can be found in ssltest.c.
Implemented changes to s_server and s_client to exercise supplemental data callbacks via the -auth argument, as well as additional flags to exercise supplemental data being sent only during renegotiation.
* Many XMPP servers are configured with multiple domains (virtual hosts)
* In order to establish successfully the TLS connection you have to specify
which virtual host you are trying to connect.
* Test this, for example with ::
* Fail:
openssl s_client -connect talk.google.com:5222 -starttls xmpp
* Works:
openssl s_client -connect talk.google.com:5222 -starttls xmpp -xmpphost gmail.com
* When the host used in "-connect" is not what the remote XMPP server expects
the server will return an error like this:
<stream:error>
<host-unknown xmlns='urn:ietf:params:xml:ns:xmpp-streams'/>
</stream:error>
* But the actual code will stay on the loop forever because the stop condition
"/stream:features>" will never happen,
* Make this more robust: The stop condition should be that BIO_read failed
* Test if for example with ::
openssl s_client -connect random.jabb3r.net:5222 -starttls xmpp
* Some XMPP Servers (OpenFire) use double quotes.
* This makes s_client starttls work with this servers.
* Tested with OpenFire servers from http://xmpp.net/ ::
openssl s_client -connect coderollers.com:5222 -starttls xmpp
This change adds support for ALPN[1] in OpenSSL. ALPN is the IETF
blessed version of NPN and we'll be supporting both ALPN and NPN for
some time yet.
[1] https://tools.ietf.org/html/draft-ietf-tls-applayerprotoneg-00
Conflicts:
ssl/ssl3.h
ssl/t1_lib.c
Add new methods DTLS_*_method() which support both DTLS 1.0 and DTLS 1.2 and
pick the highest version the peer supports during negotiation.
As with SSL/TLS options can change this behaviour specifically
SSL_OP_NO_DTLSv1 and SSL_OP_NO_DTLSv1_2.
Add correct flags for DTLS 1.2, update s_server and s_client to handle
DTLS 1.2 methods.
Currently no support for version negotiation: i.e. if client/server selects
DTLS 1.2 it is that or nothing.
