Change the early data API so that the server must use
SSL_write_early_data() to write to an unauthenticated client.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
This is for consistency with the rest of the API where all the functions
are called *early_data*.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
This is for consistency with the rest of the API where all the functions
are called *early_data*.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
Check that we actually resumed the session, and that we selected the first
identity.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
If the ticket age calcualtions do not check out then we must not accept
early data (it could be a replay).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
We also skip any early_data that subsequently gets sent. Later commits will
process it if we can.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
We provide SSL_write_early() which *must* be called first on a connection
(prior to any other IO function including SSL_connect()/SSL_do_handshake()).
Also SSL_write_early_finish() which signals the end of early data.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
do_ssl3_write() was crashing when compression was enabled. We calculate
the maximum length that a record will be after compression and reserve
those bytes in the WPACKET. Unfortunately we were adding the maximum
compression overhead onto the wrong variable resulting in a corrupted
record.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2814)
- FLAT_INC
- PKCS1_CHECK (the SSL_OP_PKCS1_CHECK options have been
no-oped)
- PKCS_TESTVECT (debugging leftovers)
- SSL_AD_MISSING_SRP_USERNAME (unfinished feature)
- DTLS_AD_MISSING_HANDSHAKE_MESSAGE (unfinished feature)
- USE_OBJ_MAC (note this removes a define from the public header but
very unlikely someone would be depending on it)
- SSL_FORBID_ENULL
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
This removes the fips configure option. This option is broken as the
required FIPS code is not available.
FIPS_mode() and FIPS_mode_set() are retained for compatibility, but
FIPS_mode() always returns 0, and FIPS_mode_set() can only be used to
turn FIPS mode off.
Reviewed-by: Stephen Henson <steve@openssl.org>
the uninitialized session_id now.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2608)
There are a small number of functions in libssl that are internal only
and never used by anything.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2770)
This adds partial support for TLS 1.3 certificate request message.
The request context and extensions are currently ignored on receive
and set to zero length on send.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2728)
The certificate types used to be held in a fixed length array or (if
it was too long) a malloced buffer. This was done to retain binary
compatibility. The code can be simplified now SSL is opaque by always
using a malloced buffer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2733)
Provide a callback interface that gives the application the ability
to adjust the nascent SSL object at the earliest stage of ClientHello
processing, immediately after extensions have been collected but
before they have been processed.
This is akin to BoringSSL's "select_certificate_cb" (though it is not
API compatible), and as the name indicates, one major use is to examine
the supplied server name indication and select what certificate to
present to the client. However, it can also be used to make more
sweeping configuration changes to the SSL object according to the
selected server identity and configuration. That may include adjusting
the permitted TLS versions, swapping out the SSL_CTX object (as is
traditionally done in a tlsext_servername_callback), changing the
server's cipher list, and more.
We also wish to allow an early callback to indicate that it needs to perform
additional work asynchronously and resume processing later. To that effect,
refactor the second half of tls_process_client_hello() into a subroutine to be
called at the post-processing stage (including the early callback itself), to
allow the callback to result in remaining in the same work stage for a later
call to succeed. This requires allocating for and storing the CLIENTHELLO_MSG
in the SSL object to be preserved across such calls, but the storage is
reclaimed after ClientHello processing finishes.
Information about the CliehtHello is available to the callback by means of
accessor functions that can only be used from the early callback. This allows
extensions to make use of the existing internal parsing machinery without
exposing structure internals (e.g., of PACKET), so that applications do not
have to write fragile parsing code.
Applications are encouraged to utilize an early callback and not use
a servername_callback, in order to avoid unexpected behavior that
occurs due to the relative order of processing between things like
session resumption and the historical servername callback.
Also tidy up nearby style by removing unnecessary braces around one-line
conditional bodies.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Add the new enum value and case statements as appropriate.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Split off the portions that mutate the SSL object into a separate
function that the state machine calls, so that the public API can
be a pure function. (It still needs the SSL parameter in order
to determine what SSL_METHOD's get_cipher_by_char() routine to use,
though.)
Instead of returning the stack of ciphers (functionality that was
not used internally), require using the output parameter, and add
a separate output parameter for the SCSVs contained in the supplied
octets, if desired. This lets us move to the standard return value
convention. Also make both output stacks optional parameters.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Move ssl_bytes_to_cipher_list() to ssl_lib.c and create a public
wrapper around it. This lets application early callbacks easily get
SSL_CIPHER objects from the raw ciphers bytes without having to
reimplement the parsing code. In particular, they do not need to
know the details of the sslv2 format ClientHello's ciphersuite
specifications.
Document the new public function, including the arguably buggy behavior
of modifying the supplied SSL object. On the face of it, such a function
should be able to be pure, just a direct translation of wire octets to
internal data structures.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Now that we have made SCSVs into more of a first-class object, provide
a way for the bytes-to-SSL_CIPHER conversion to actually return them.
Add a flag 'all' to ssl_get_cipher_by_char to indicate that we want
all the known ciphers, not just the ones valid for encryption. This will,
in practice, let the caller retrieve the SCSVs.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Just as we have a table of ssl3_ciphers, add a table of ssl3_scsvs, to contain
SSL_CIPHER objects for these non-valid ciphers. This will allow for unified
handling of such indicators, especially as we are preparing to pass them around
between functions.
Since the 'valid' field is not set for the SCSVs, they should not be used
for anything requiring a cryptographic cipher (as opposed to something
being stuck in a cipher-shaped hole in the TLS wire protocol).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
We'll be adding a field of this type to struct ssl_st in a subsequent
commit, and need the type definition to be in scope already.
Also move up the RAW_EXTENSION definition that it depends on.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Keep track of the length of the pre_proc_exts array.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Modify the API of tls_collect_extensions() to be able to output the number of
extensions that are known (i.e., the length of its 'res' output). This number
can never be zero on a successful return due to the builtin extensions list,
but use a separate output variable so as to not overload the return value
semantics.
Having this value easily available will give consumers a way to avoid repeating
the calculation.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2607)
Set default validity flags if signature algorithms extension
is not present. Preserve flags when checking chains.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2679)
This implementation is written in endian agnostic C code. No attempt
at providing machine specific assembly code has been made. This
implementation expands the evptests by including the test cases from
RFC 5794 and ARIA official site rather than providing an individual
test case. Support for ARIA has been integrated into the command line
applications, but not TLS. Implemented modes are CBC, CFB1, CFB8,
CFB128, CTR, ECB and OFB128.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2337)
We use an int instead. That means SSL_key_update() also should use an int.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)
Too many KeyUpdate message could be inicative of a problem (e.g. an
infinite KeyUpdate loop if the peer always responds to a KeyUpdate message
with an "update_requested" KeyUpdate response), or (conceivably) an attack.
Either way we limit the number of KeyUpdate messages we are prepared to
handle.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)
For client auth call tls_choose_sigalg to select the certificate
and signature algorithm. Use the selected algorithm in
tls_construct_cert_verify.
Remove obsolete tls12_get_sigandhash.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2643)
Select appropriate signature algorithm and certificate for client
authentication using tls_choose_sigalg.
A lot of selection logic is very similar except not finding a
certificate is not a fatal error: we just do not present a
certificate.
For TLS 1.2 and earlier we only check the current certificate
is suitable (for compatibility with previous logic) for TLS 1.3
(where there are no compatibility issues) we support multiple
client certificates for different algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2643)
Following on from CVE-2017-3733, this removes the OPENSSL_assert() check
that failed and replaces it with a soft assert, and an explicit check of
value with an error return if it fails.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In 1.1.0 changing the ciphersuite during a renegotiation can result in
a crash leading to a DoS attack. In master this does not occur with TLS
(instead you get an internal error, which is still wrong but not a security
issue) - but the problem still exists in the DTLS code.
The problem is caused by changing the flag indicating whether to use ETM
or not immediately on negotiation of ETM, rather than at CCS. Therefore,
during a renegotiation, if the ETM state is changing (usually due to a
change of ciphersuite), then an error/crash will occur.
Due to the fact that there are separate CCS messages for read and write
we actually now need two flags to determine whether to use ETM or not.
CVE-2017-3733
Reviewed-by: Richard Levitte <levitte@openssl.org>
Use negotiated signature algorithm and certificate index in
tls_construct_key_exchange instead of recalculating it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
Now the certificate and signature algorithm is set in one place we
can use it directly insetad of recalculating it. The old functions
ssl_get_server_send_pkey() and ssl_get_server_cert_index() are no
longer required.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
Update tls_choose_sigalg to choose a signature algorithm for all
versions of TLS not just 1.3.
For TLS 1.2 we choose the highest preference signature algorithm
for the chosen ciphersuite.
For TLS 1.1 and earlier the signature algorithm is determined by
the ciphersuite alone. For RSA we use a special MD5+SHA1 signature
algorithm.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
Add inline function ssl_has_cert which checks to see if a certificate and
private key for a given index are not NULL.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
The original intent of SSL_PKEY_RSA_SIGN and SSL_PKEY_RSA_ENC was to
support two different keys for RSA signing and decrypt. However this
was never implemented and we only ever set one key and the other was
always NULL. Replace with single SSL_PKEY_RSA type.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2587)
While it's always safe to read |SSL_MAX_SSL_SESSION_ID_LENGTH| bytes
from an |SSL_SESSION|'s |session_id| array, the hash function would do
so with without considering if all those bytes had been written to.
This change checks |session_id_length| before possibly reading
uninitialised memory. Since the result of the hash function was already
attacker controlled, and since a lookup of a short session ID will
always fail, it doesn't appear that this is anything more than a clean
up.
In particular, |ssl_get_prev_session| uses a stack-allocated placeholder
|SSL_SESSION| as a lookup key, so the |session_id| array may be
uninitialised.
This was originally found with libFuzzer and MSan in
https://boringssl.googlesource.com/boringssl/+/e976e4349d693b4bbb97e1694f45be5a1b22c8c7,
then by Robert Swiecki with honggfuzz and MSan here. Thanks to both.
Reviewed-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2583)
When idx is negative (as is the case with do_print_sigalgs in
apps/s_cb.c), AddressSanitizer complains about a buffer overflow (read).
Even if the pointer is not dereferenced, this is undefined behavior.
Change the user not to use "-1" as index since the function is
documented to return 0 on out-of-range values.
Tested with `openssl s_server` and `curl -k https://localhost:4433`.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2349)
If s->s3->tmp.new_cipher is NULL then a crash can occur. This can happen
if an alert gets sent after version negotiation (i.e. we have selected
TLSv1.3 and ended up in tls13_enc), but before a ciphersuite has been
selected.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2575)
Add SSL_kANY and SSL_aANY contants for TLS 1.3 ciphersuites. Return
appropriate text strings when they are used.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2550)
Fixed a memory leak in ASN1_digest and ASN1_item_digest.
Reworked error handling in asn1_item_embed_new.
Fixed error handling in int_ctx_new and EVP_PKEY_CTX_dup.
Fixed a memory leak in CRYPTO_free_ex_data.
Reworked error handing in x509_name_ex_d2i, x509_name_encode and x509_name_canon.
Check for null pointer in tls_process_cert_verify.
Fixes#2103#2104#2105#2109#2111#2115
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2342)
We now set the server certificate in tls_choose_sigalg() so there is
no need for a special case for TLS 1.3 any more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)
New function tls_choose_sigalg(). This is a signature algorithm version
of ssl3_choose_cipher(): it picks and sets the appropriate signature
algorithm and certificate based on shared signature algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)
session_ctx and initial_ctx are aliases of each other, and with the
opaque data structures, there's no need to keep both around. Since
there were more references of session_ctx, replace all instances of
initial_ctx with session_ctx.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2334)
Remove unnecessary lookup operations: use the indices and data in the
lookup table directly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2324)
