Use negotiated signature algorithm and certificate index in
tls_construct_key_exchange instead of recalculating it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
Now the certificate and signature algorithm is set in one place we
can use it directly insetad of recalculating it. The old functions
ssl_get_server_send_pkey() and ssl_get_server_cert_index() are no
longer required.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
Update tls_choose_sigalg to choose a signature algorithm for all
versions of TLS not just 1.3.
For TLS 1.2 we choose the highest preference signature algorithm
for the chosen ciphersuite.
For TLS 1.1 and earlier the signature algorithm is determined by
the ciphersuite alone. For RSA we use a special MD5+SHA1 signature
algorithm.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
Add inline function ssl_has_cert which checks to see if a certificate and
private key for a given index are not NULL.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
The original intent of SSL_PKEY_RSA_SIGN and SSL_PKEY_RSA_ENC was to
support two different keys for RSA signing and decrypt. However this
was never implemented and we only ever set one key and the other was
always NULL. Replace with single SSL_PKEY_RSA type.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2587)
While it's always safe to read |SSL_MAX_SSL_SESSION_ID_LENGTH| bytes
from an |SSL_SESSION|'s |session_id| array, the hash function would do
so with without considering if all those bytes had been written to.
This change checks |session_id_length| before possibly reading
uninitialised memory. Since the result of the hash function was already
attacker controlled, and since a lookup of a short session ID will
always fail, it doesn't appear that this is anything more than a clean
up.
In particular, |ssl_get_prev_session| uses a stack-allocated placeholder
|SSL_SESSION| as a lookup key, so the |session_id| array may be
uninitialised.
This was originally found with libFuzzer and MSan in
https://boringssl.googlesource.com/boringssl/+/e976e4349d693b4bbb97e1694f45be5a1b22c8c7,
then by Robert Swiecki with honggfuzz and MSan here. Thanks to both.
Reviewed-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2583)
When idx is negative (as is the case with do_print_sigalgs in
apps/s_cb.c), AddressSanitizer complains about a buffer overflow (read).
Even if the pointer is not dereferenced, this is undefined behavior.
Change the user not to use "-1" as index since the function is
documented to return 0 on out-of-range values.
Tested with `openssl s_server` and `curl -k https://localhost:4433`.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2349)
If s->s3->tmp.new_cipher is NULL then a crash can occur. This can happen
if an alert gets sent after version negotiation (i.e. we have selected
TLSv1.3 and ended up in tls13_enc), but before a ciphersuite has been
selected.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2575)
Add SSL_kANY and SSL_aANY contants for TLS 1.3 ciphersuites. Return
appropriate text strings when they are used.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2550)
Fixed a memory leak in ASN1_digest and ASN1_item_digest.
Reworked error handling in asn1_item_embed_new.
Fixed error handling in int_ctx_new and EVP_PKEY_CTX_dup.
Fixed a memory leak in CRYPTO_free_ex_data.
Reworked error handing in x509_name_ex_d2i, x509_name_encode and x509_name_canon.
Check for null pointer in tls_process_cert_verify.
Fixes#2103#2104#2105#2109#2111#2115
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2342)
We now set the server certificate in tls_choose_sigalg() so there is
no need for a special case for TLS 1.3 any more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)
New function tls_choose_sigalg(). This is a signature algorithm version
of ssl3_choose_cipher(): it picks and sets the appropriate signature
algorithm and certificate based on shared signature algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)
session_ctx and initial_ctx are aliases of each other, and with the
opaque data structures, there's no need to keep both around. Since
there were more references of session_ctx, replace all instances of
initial_ctx with session_ctx.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2334)
Remove unnecessary lookup operations: use the indices and data in the
lookup table directly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2324)
Use TLS_MAX_SIGALGCNT for the maximum number of entries in the
signature algorithms array.
Use TLS_MAX_SIGSTRING_LEN for the maxiumum length of each signature
component instead of a magic number.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
For TLS 1.2 if we have no signature algorithms extension then lookup
using the complete table instead of (empty) shared signature algorithms
list so we pick up defaults.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
Since every supported signature algorithm is now an entry in the
SIGALG_LOOKUP table we can replace shared signature algortihms with
pointers to constant table entries.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
Add additional entries in the TLS 1.2 signature table to include
the name, sig and hash NID (if any) and required curve (if any).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
Lookup the signature type in the shared list: we can use this to
use PSS if the peer supports it for TLS 1.2.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
Add function to retrieve signature type: in the case of RSA
keys the signature type can be EVP_PKEY_RSA or EVP_PKEY_RSA_PSS.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
Store peer signature type in s->s3->tmp.peer_sigtype and check it
to see if the peer used PSS.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
Extend support for PSS key signatures by using the EVP_PKEY_RSA_PSS type
to distinguish them from PKCS1 signature types.
Allow setting of PSS signature algorithms using the string "PSS" or
"RSA-PSS".
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
The newly added SSL3_CK_CIPHERSUITE_FLAG shouldn't be in a public header
file
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
Changing the value of SSL_MAX_MASTER_KEY_LENGTH had some unexpected
side effects in the <=TLS1.2 code which apparently relies on this being
48 for interoperability. Therefore create a new define for the TLSv1.3
resumption master secret which can be up to 64 bytes.
Found through the boring test suite.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
If we have deserialized the SSL_SESSION then in some circumstances the
session->cipher value is NULL. We were patching up in some places but not
in others. We should just do it as part of loading the SSL_SESSION.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
Don't attempt to add a TLS1.3 session to a TLS1.2 ClientHello session
ticket extensions. Similarly don't add a TLS1.2 session to a TLS1.3
psk extension.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
Make sure the session version consistency check is inside
ssl_get_prev_session(). Also fixes a bug where an inconsistent version can
cause a seg fault in TLSv1.3.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
This mops up various edge cases with key_shares and makes sure we still
generate the handshake secret if we haven't been provided with one but we
have a PSK.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
Requires a refactor of the ServerHello parsing, so that we parse first and
then subsequently process. This is because the resumption information is
held in the extensions block which is parsed last - but we need to know that
information earlier.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
For the psk extension we need to fill in all the lengths of the message so
far, even though we haven't closed the WPACKET yet. This provides a function
to do that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
These functions are problematic in TLSv1.3 because the server sends the
NewSessionTicket message after the handshake has finished.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
The record layer was making decisions that should really be left to the
state machine around unexpected handshake messages that are received after
the initial handshake (i.e. renegotiation related messages). This commit
removes that code from the record layer and updates the state machine
accordingly. This simplifies the state machine and paves the way for
handling other messages post-handshake such as the NewSessionTicket in
TLSv1.3.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
The pointer that was freed in the SSLv2 section of ssl_bytes_to_cipher_list
may have stepped up from its allocated position. Use a pointer that is
guaranteed to point at the start of the allocated block instead.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2312)
When the client reads DH parameters from the TLS stream, we only
checked that they all are non-zero. This change updates the check to
use DH_check_params()
DH_check_params() is a new function for light weight checking of the p
and g parameters:
check that p is odd
check that 1 < g < p - 1
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Remove duplicate defines from EVP source files.
Most of them were in evp.h, which is always included.
Add new ones evp_int.h
EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK is now always defined in evp.h, so
remove conditionals on it
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2201)
Well, not as much, at least.
Commit 07afdf3c3a changed things so
that for SSLv2 format ClientHellos we store the cipher list in the
TLS format, i.e., with two bytes per cipher, to be consistent with
historical behavior.
However, the space allocated for the array still performed the computation
with three bytes per cipher, a needless over-allocation (though a relatively
small one, all things considered).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2281)
SSL_get0_raw_cipherlist() was a little too "raw" in the case of an SSLv2
compat ClientHello. In 1.0.2 and below, during version negotiation, if
we received an SSLv2 compat ClientHello but actually wanted to do SSLv3+
then we would construct a "fake" SSLv3+ ClientHello. This "fake" ClientHello
would have its ciphersuite list converted to the SSLv3+ format. It was
this "fake" raw list that got saved away to later be returned by a call to
SSL_get0_raw_cipherlist().
In 1.1.0+ version negotiation works differently and we process an SSLv2
compat ClientHello directly without the need for an intermediary "fake"
ClientHello. This meant that the raw ciphersuite list being saved was in
the SSLv2 format. Any caller of this function would not expect that and
potentially overread the returned buffer by one byte.
Fixes#2189
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2280)
- s == NULL can mean c is a new session *or* lh_insert was
unable to create a hash entry.
- use lh_SSL_SESSION_retrieve to check for this error condition.
- If it happens simply remove the extra reference again.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2138)
This comes from a comment in GH issue #1027. Andy wrote the code,
Rich made the PR.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2253)
In a non client-auth renegotiation where the original handshake *was*
client auth, then the server will expect the client to send a Certificate
message anyway resulting in a connection failure.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1982)
In a non client-auth renegotiation where the original handshake *was*
client auth, then the client will send a Certificate message anyway
resulting in a connection failure.
Fixes#1920
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1982)
The flag SSL_VERIFY_CLIENT_ONCE is documented as follows:
B<Server mode:> only request a client certificate on the initial TLS/SSL
handshake. Do not ask for a client certificate again in case of a
renegotiation. This flag must be used together with SSL_VERIFY_PEER.
B<Client mode:> ignored
But the implementation actually did nothing. After the server sends its
ServerKeyExchange message, the code was checking s->session->peer to see if
it is NULL. If it was set then it did not ask for another client
certificate. However s->session->peer will only be set in the event of a
resumption, but a ServerKeyExchange message is only sent in the event of a
full handshake (i.e. no resumption).
The documentation suggests that the original intention was for this to
have an effect on renegotiation, and resumption doesn't come into it.
The fix is to properly check for renegotiation, not whether there is already
a client certificate in the session.
As far as I can tell this has been broken for a *long* time.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1982)
The length passed to tls1_set_sigalgs() is a multiple of two and there are
two char entries in the list for each sigalg. When we set
client_sigalgslen or conf_sigalgslen this is the number of ints in the list
where there is one entry per sigalg (i.e. half the length of the list passed
to the function).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
The siglen value needs to be initialised prior to it being read in the
call to EVP_DigestSignFinal later in this function.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
TLSv1.3 introduces PSS based sigalgs. Offering these in a TLSv1.3 client
implies that the client is prepared to accept these sigalgs even in
TLSv1.2.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
TLSv1.3 freezes the record layer version and ensures that it is always set
to TLSv1.0. Some implementations check this.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
In TLSv1.3 we must use PSS based sig algs for RSA signing. Ignore any
shared sig algs which are PKCS1 based.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
A misreading of the TLS1.3 spec meant we were using the handshake hashes
up to and including the Client Finished to calculate the client
application traffic secret. We should be only use up until the Server
Finished.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
We need to use the length of the handshake hash for the length of the
finished key.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
We were not incrementing the sequence number every time we sent/received
a record.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
The sigalgs work has made some old lookup tables and functions redundant
so remove them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
We had an extra layer of indirection in looking up hashes and sigs based
on sigalgs which is now no longer necessary. This removes it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
In TLSv1.2 an individual sig alg is represented by 1 byte for the hash
and 1 byte for the signature. In TLSv1.3 each sig alg is represented by
two bytes, where the two bytes together represent a single hash and
signature combination. This converts the internal representation of sigalgs
to use a single int for the pair, rather than a pair of bytes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
Otherwise the client will try to process it again. The second time around
it will try and move the record data into handshake fragment storage and
realise that there is no data left. At that point it marks it as read
anyway. However, it is a bug that we go around the loop a second time, so
we prevent that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2200)
This variable represents the index of the cert within the chain, so give it
a name that better represents that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
We remove the separate CertificateStatus message for TLSv1.3, and instead
send back the response in the appropriate Certificate message extension.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
Also updates TLSProxy to be able to understand the format and parse the
contained extensions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
Continuing from the previous commit we also need to extend the extensions
framework to supply the Certificate we just read during parsing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
The Certificate message in TLS1.3 has an extensions block for each
Certificate. Therefore we need to extend tls_construct_extensions() to pass
in the certificate we are working on. We also pass in the position in the
chain (with 0 being the first certificate).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
Previously we were omitting the extension information from ext_defs if
the association no- option was defined. This doesn't work because the
indexes into the table are no longer valid.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2153)
This should be sent in the ServerHello if a EC based ciphersuite is
negotiated. The relevant flag to do this was missed off in the recent
extensions refactor.
Fixes GitHub Issue #2133
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2153)
SSL_clear() was resetting numwpipes to 0, but not freeing any allocated
memory for existing write buffers.
Fixes#2026
Reviewed-by: Rich Salz <rsalz@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Travis was indicating a bogus uninit var warning. This fixes it.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Various functions got renamed. We need to rename the error codes too.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The existing code used the magic number -1 to represent the absence of
a status_type in the extension. This commit replaces it with a macro.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
When we call tls_collect_extensions() we need to free up the raw
extensions data later.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
In TLS1.3 some ServerHello extensions remain in the ServerHello, while
others move to the EncryptedExtensions message. This commit performs that
move.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Because extensions were keyed by type which is sparse, we were continually
scanning the list to find the one we wanted. The way we stored them also
had the side effect that we were running initialisers/finalisers in a
different oder to the parsers. In this commit we change things so that we
instead key on an index value for each extension.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove some functions that are no longer needed now that we have the new
extension framework.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The _clienthello_ in the extensions parsing functions is overly specific.
Better to keep the convention to just _client_
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This lays the foundation for a later move to have the extensions built and
placed into the correct message for TLSv1.3 (e.g. ServerHello or
EncryptedExtensions).
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Later we will have client extensions code too.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add support for construction of extensions
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This builds on the work started in 1ab3836b3 and extends is so that
each extension has its own identified parsing functions, as well as an
allowed context identifying which messages and protocols it is relevant for.
Subsequent commits will do a similar job for the ServerHello extensions.
This will enable us to have common functions for processing extension blocks
no matter which of the multiple messages they are received from. In TLSv1.3
a number of different messages have extension blocks, and some extensions
have moved from one message to another when compared to TLSv1.2.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Subsequent commits will pull other extensions code into this file.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
At this stage the message is just empty. We need to fill it in with
extension data.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There are some minor differences in the format of a ServerHello in TLSv1.3.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Improves the readability of the code, and reduces the liklihood of errors.
Also made a few minor style changes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
At the moment the msg callback only received the record header with the
outer record type in it. We never pass the inner record type - we probably
need to at some point.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This updates the record layer to use the TLSv1.3 style nonce construciton.
It also updates TLSProxy and ossltest to be able to recognise the new
layout.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Calling SSL_set_accept_state() after DTLSv1_listen() clears the state, so
SSL_accept() no longer works. In 1.0.2 calling DTLSv1_listen() would set
the accept state automatically. We should still do that.
Fixes#1989
Reviewed-by: Andy Polyakov <appro@openssl.org>
Verify that the encrypt-then-mac negotiation is handled
correctly. Additionally, when compiled with no-asm, this test ensures
coverage for the constant-time MAC copying code in
ssl3_cbc_copy_mac. The proxy-based CBC padding test covers that as
well but it's nevertheless better to have an explicit handshake test
for mac-then-encrypt.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The SSL_IS_TLS13() macro wasn't quite right. It would come back with true
in the case where we haven't yet negotiated TLSv1.3, but it could be
negotiated.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There is a set of miscellaneous processing for OCSP, CT etc at the end of
the ServerDone processing. In TLS1.3 we don't have a ServerDone, so this
needs to move elsewhere.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is a major overhaul of the TLSv1.3 state machine. Currently it still
looks like TLSv1.2. This commit changes things around so that it starts
to look a bit less like TLSv1.2 and bit more like TLSv1.3.
After this commit we have:
ClientHello
+ key_share ---->
ServerHello
+key_share
{CertificateRequest*}
{Certificate*}
{CertificateStatus*}
<---- {Finished}
{Certificate*}
{CertificateVerify*}
{Finished} ---->
[ApplicationData] <---> [Application Data]
Key differences between this intermediate position and the final TLSv1.3
position are:
- No EncryptedExtensions message yet
- No server side CertificateVerify message yet
- CertificateStatus still exists as a separate message
- A number of the messages are still in the TLSv1.2 format
- Still running on the TLSv1.2 record layer
Reviewed-by: Rich Salz <rsalz@openssl.org>
TLSv1.3 has a NewSessionTicket message, but it is *completely* different to
the TLSv1.2 one and may as well have been called something else. This commit
removes the old style NewSessionTicket from TLSv1.3. We will have to add the
new style one back in later.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Commit 94ed2c6 dropped a ! operator by mistake, which causes extended
master secret connections to fail. This puts in back.
Reviewed-by: Richard Levitte <levitte@openssl.org>
ssl_test_old was reaching inside the SSL structure and changing the internal
BIO values. This is completely unneccessary, and was causing an abort in the
test when enabling TLSv1.3.
I also removed the need for ssl_test_old to include ssl_locl.h. This
required the addition of some missing accessors for SSL_COMP name and id
fields.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The previous commits put in place the logic to exchange key_share data. We
now need to do something with that information. In <= TLSv1.2 the equivalent
of the key_share extension is the ServerKeyExchange and ClientKeyExchange
messages. With key_share those two messages are no longer necessary.
The commit removes the SKE and CKE messages from the TLSv1.3 state machine.
TLSv1.3 is completely different to TLSv1.2 in the messages that it sends
and the transitions that are allowed. Therefore, rather than extend the
existing <=TLS1.2 state transition functions, we create a whole new set for
TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time
they will be amended.
The new TLSv1.3 transitions remove SKE and CKE completely. There's also some
cleanup for some stuff which is not relevant to TLSv1.3 and is easy to
remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN.
I also disable EXTMS for TLSv1.3. Using it was causing some added
complexity, so rather than fix it I removed it, since eventually it will not
be needed anyway.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is a temporary fix for while we are still using the old session
resumption logic in the TLSv1.3 code. Due to differences in EXTMS support
we can't resume a <=TLSv1.2 session in a TLSv1.3 connection (the EXTMS
consistency check causes the connection to abort). This causes test
failures.
Ultimately we will rewrite the session resumption logic for TLSv1.3 so this
problem will go away. But until then we need a quick fix to keep the tests
happy.
Reviewed-by: Rich Salz <rsalz@openssl.org>
At the moment the server doesn't yet do anything with this information.
We still need to send the server's key_share info back to the client. That
will happen in subsequent commits.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In this commit we just generate the extension on the client side, but don't
yet do anything with it. Subsequent commits, will add the server side
capability.
At the moment we hard code a single key_share. In the future we should make
this configurable.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is a skin deep change, which simply renames most places where we talk
about curves in a TLS context to groups. This is because TLS1.3 has renamed
the extension, and it can now include DH groups too. We still only support
curves, but this rename should pave the way for a future extension for DH
groups.
Reviewed-by: Rich Salz <rsalz@openssl.org>
