The one creating the DRBG should instantiate it, it's there that we
know which parameters we should use to instantiate it.
This splits the rand init in two parts to avoid a deadlock
because when the global drbg is created it wands to call
rand_add on the global rand method.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #4268
return true for characters > 127. I.e. they are allowing extended ASCII
characters through which then cause problems. E.g. marking superscript '2' as
a number then causes the common (ch - '0') conversion to number to fail
miserably. Likewise letters with diacritical marks can also cause problems.
If a non-ASCII character set is being used (currently only EBCDIC), it is
adjusted for.
The implementation uses a single table with a bit for each of the defined
classes. These functions accept an int argument and fail for
values out of range or for characters outside of the ASCII set. They will
work for both signed and unsigned character inputs.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4102)
Add an interface that allows accessing the scrypt KDF as a PKEY_METHOD.
This fixes#4021 (at least for the scrypt portion of the issue).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4026)
Use atfork to count child forks, and reseed DRBG when the counts don't
match.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4101)
Move the definition of ossl_assert() out of e_os.h which is intended for OS
specific things. Instead it is moved into internal/cryptlib.h.
This also changes the definition to remove the (int) cast.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4073)
store_attach_pem_bio() creates a STORE_CTX with the 'file' scheme
loader backend in PEM reading mode on an already opened BIO.
store_detach_pem_bio() detaches the STORE_CTX from the BIO and
destroys it (without destroying the BIO).
These two functions can be used in place of STORE_open() and
STORE_close(), and are present as internal support for other OpenSSL
functions.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2745)
This STORE module adds the following functionality:
- A function OSSL_STORE_open(), OSSL_STORE_load() and OSSL_STORE_close()
that accesses a URI and helps loading the supported objects (PKEYs,
CERTs and CRLs for the moment) from it.
- An opaque type OSSL_STORE_INFO that holds information on each loaded
object.
- A few functions to retrieve desired data from a OSSL_STORE_INFO
reference.
- Functions to register and unregister loaders for different URI
schemes. This enables dynamic addition of loaders from applications
or from engines.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3542)
gcc's -Wextra pulls in -Wold-style-declaration, which triggers when a
declaration has a storage-class specifier as a non-initial qualifier.
The ISO C formal grammar requires the storage-class to be the first
component of the declaration, if present.
Seeint as the register storage-class specifier does not really have any effect
anymore with modern compilers, remove it entirely while we're here, instead of
fixing up the order.
Interestingly, the gcc devteam warnings do not pull in -Wextra, though
the clang ones do.
[extended tests]
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3239)
Many signature types define the digest and public key type by a single OID
such as ecdsa_with_sha256.
Some types (RSA-PSS for example) use a single OID to indicate the signature
scheme and additional parameters are encoded in the AlgorithmIdentifier.
Add an X509_SIG_INFO structure to contain details about the signature type:
specifically the digest algorithm, public key algorithm, security bits and
various flags. This supports both existing algorithms and more complex
types.
Add accessors for the structure and a special case that retrieves signature
information from a certificate.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3301)
Modified code from http://seed.kisa.or.kr to human readable code.
Previous 8-bit code is available with -DOPENSSL_SMALL_FOOTPRINT.
New code is >2x faster.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3242)
Because many of our test programs use internal headers, we need to make
sure they know how, exactly, to mangle the symbols. So far, we've done
so by specifying it in the affected test programs, but as things change,
that will develop into a goose chase. Better then to declare once and
for all how symbols belonging in our libraries are meant to be treated,
internally as well as publically.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3259)
There are a number of symbols in bn which are internal only and never used
by anything. They should be removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2766)
This implementation is written in endian agnostic C code. No attempt
at providing machine specific assembly code has been made. This
implementation expands the evptests by including the test cases from
RFC 5794 and ARIA official site rather than providing an individual
test case. Support for ARIA has been integrated into the command line
applications, but not TLS. Implemented modes are CBC, CFB1, CFB8,
CFB128, CTR, ECB and OFB128.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2337)
The core SipHash supports either 8 or 16-byte output and a configurable
number of rounds.
The default behavior, as added to EVP, is to use 16-byte output and
2,4 rounds, which matches the behavior of most implementations.
There is an EVP_PKEY_CTRL that can control the output size.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2216)
Remove duplicate defines from EVP source files.
Most of them were in evp.h, which is always included.
Add new ones evp_int.h
EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK is now always defined in evp.h, so
remove conditionals on it
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2201)
Add Poly1305 as a "signed" digest.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2128)
Still needs to be documented, somehow/somewhere.
The env var OPENSSL_MALLOC_FAILURES controls how often malloc/realloc
should fail. It's a set of fields separated by semicolons. Each field
is a count and optional percentage (separated by @) which defaults to 100.
If count is zero then it lasts "forever." For example: 100;@25 means the
first 100 allocations pass, then the rest have a 25% chance of failing
until the program exits or crashes.
If env var OPENSSL_MALLOC_FD parses as a positive integer, a record
of all malloc "shouldfail" tests is written to that file descriptor.
If a malloc will fail, and OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE is not set
(platform specific), then a backtrace will be written to the descriptor
when a malloc fails. This can be useful because a malloc may fail but
not be checked, and problems will only occur later.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1252)
APP_INFO is currently a field of MEM struct.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1583)
Remove current_method: it was intended as a means of retrying
lookups bit it was never used. Now that X509_verify_cert() is
a "one shot" operation it can never work as intended.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Fix some indentation at the same time
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1292)
New hostname checking function asn1_valid_host()
Check commonName entries against nameConstraints: any CN components in
EE certificate which look like hostnames are checked against
nameConstraints.
Note that RFC5280 et al only require checking subject alt name against
DNS name constraints.
Reviewed-by: Richard Levitte <levitte@openssl.org>
We previously had a number of logical names for the different parts.
There's really no need for that, the default directories are in one
directory tree. So we only define OSSL$DATAROOT: and make everything
related to that one.
Reviewed-by: Rich Salz <rsalz@openssl.org>
- The install top is versioned by default. However, only the major
version should be used.
- the default areas for certs, private keys an config files have
changed, now all prefixed with 'OSSL$'. This gets reflected in
cryptlib.h.
- [.VMS]openssl_startup.com.in had some faults regarding creating
rooted concealed logical names.
Reviewed-by: Rich Salz <rsalz@openssl.org>
