The AIX binder needs to be instructed that the output will have no entry
point (see AIX' ld manual: -e in the Flags section; autoexp and noentry
in the Binder section).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8282)
When reworking the way library file names and extensions were formed,
AIX was lost in the process. This restores the previous
functionality.
Fixes#8156
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8162)
VMS doesn't currently support unloading of shared object, and we need
to reflect that. Without this, the shlibload test fails
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8131)
Add platform::Unix, which is a generic Unix module to support product
name and extensions functionlity. However, this isn't quite enough,
as mingw and Cygwin builds are done using the same templates, but
since shared libraries work as on Windows and are named accordingly,
platform::mingw and platform::Cygwin were also added to provide the
necessary tweaks.
This reworks Configurations/unix-Makefile.tmpl to work out product
names in platform::Unix et al terms. In this one, we currently do
care about the *_extension config attributes, and the modules adapt
accordingly where it matters.
This change also affected crypto/include/internal/dso_conf.h.in, since
the DSO extension is meant to be the same as the short shared library
extension, which isn't '.so' everywhere.
'shared_extension' attributes that had the value
'.so.\$(SHLIB_VERSION_NUMBER)' are removed, platform::Unix provides
an extension where the shared library version number is hard-coded
instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7473)
Add platform::Windows, which is a generic Windows module, and
platform::Windows::MSVC, which is a module specifically for MS Visual
C.
This reworks Configurations/windows-makeffile.tmpl to work out product
names in platform::Windows. Something to be noted is that the new
functionality ignores the *_extension config attributes, as they were
never used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7473)
It's being replaced with constant-time alternative.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7589)
The generation of linker scripts was badly balanced, as all sorts of
platform dependent stuff went into the top build.info, when that part
should really be made as simply and generic as possible.
Therefore, we move a lot of the "magic" to the build files templates,
since they are the place for platform dependent things. What remains
is to parametrize just enough in the build.info file to generate the
linker scripts correctly for each associated library.
"linker script" is a term usually reserved for certain Unix linkers.
However, we only use them to say what symbols should be exported, so
we use the term loosely for all platforms. The internal extension is
'.ld', and is changed by the build file templates as appropriate for
each target platform.
Note that this adds extra meaning to the value of the shared_target
attribute.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7333)
With the change to have separate object files by intent, VMS name
mangling gets done differently. While we previously had that for
libraries only, we must now turn that on generally for our programs,
because some of them depend in internal libraries where mangled names
are all that there is.
Dynamic modules are still built with non-mangled names, which is good
enough to show that it's possible to build with our public libraries
using our public headers.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7208)
On the same note, change the 'NASM not found' message to give specific
advice on how to handle the failure.
Fixes#6765
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6771)
This makes AIX build procedure behave more like e.g. Solaris. Most
notably this makes it possible to pass -Wl,-R,'$(LIBRPATH)' at config
time to embed installation destination as library search path into
openssl binary. This doesn't imply that other applications have to be
linked with -bsvr4, they are free to choose whatever appropriate for
given circumstances.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6487)
AIX treats its shared libraries in unique manner, by placing multiple
shared objects of different versions and bitnesses, into .a file.
So far we have been naively linking with version-less libcrypto|ssl.so,
which poses long-term maintenance problems. One could choose to link
straight with libcrypto.so.X.Y [or libcrypto.X.Y.so], but it would be
inconsistent with the way AIX [or Unix] does things.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6487)
Add irix-common template that covers even irix-shared from shared-info.pl.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6536)
Add aix-common template that covers even aix-shared from shared-info.pl,
add -bsymbolic to shared_ldflags.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6453)
The flag was apparently omitted in switch from Makefile.shared to
shared-info.pl. Do put it back! And in the process move all
solaris-shared flags from shared-info.pl to solaris-common.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6446)
Move ios targets to 15-ios.conf and modernize by deploying xcrun.
This excuses user from looking for paths and setting environment
variables. [Thanks to @0neday for hint.]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6410)
Rationale for enforcing no-engine is because of disconnect between
compile-time config and run-time, which is a per-application sandbox
directory which one can't predict in advance. Besides, none of the
bundled engines actually give an edge on iOS...
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6106)
HP-UX provides sockets symbols with incompatible prototypes under same
name. This caused problems in 64-bit builds. Additional macros force
unambiguous symbols with unambiguous prototypes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5742)
picker() is type agnostic, but its output consumer is not. Or rather
it doesn't work if picker() picks nothing when consumer expects
array. So ensure array is returned when array is expected.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5770)
Although it deviates from the actual prototype of DSO_dsobyaddr(), this
is now ISO C compliant and gcc -Wpedantic accepts the code.
Added DATA segment checking to catch ptrgl virtual addresses. Avoid
memleaks with every AIX/dladdr() call. Removed debug-fprintf()s.
Added test case for DSO_dsobyaddr(), which will eventually call dladdr().
Removed unecessary AIX ifdefs again.
The implementation can only lookup function symbols, no data symbols.
Added PIC-flag to aix*-cc build targets.
As AIX is missing a dladdr() implementation it is currently uncertain our
exit()-handlers can still be called when the application exits. After
dlclose() the whole library might have been unloaded already.
Signed-off-by: Matthias Kraft <makr@gmx.eu>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5668)
The Debian build system uses a `debian' target which sets CFLAGS and
then we have for instance debian-amd64 which inherits from
linux-x86_64 and debian [0]. So far so good.
Unless there are different suggestions how to do this, I would keep it.
However since the target name does not start with `linux', the build
system does not enable the afalg engine. So in order to get enabled, I
added a
`enable => [ "afalgeng" ],'
to the generic linux config which sets it explicit (as suggested by
Richard Levitte). Having this set, we can check for it instead matching
the target name.
[0] https://sources.debian.org/src/openssl/1.1.0g-2/Configurations/20-debian.conf/
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5169)
We have '--strict-warnings' for this kind of stuff... also, user
flags are added last, so this overrides any warning supression
--strict-warnings may put in place (for good reasons).
Fixes#5609
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5612)
Move Android targets to separate file, automate sysroot setup and
add support for NDK 16.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5589)
$target{build_scheme} consists of fixed number of elements with 3rd
element denoting VC install-path "flavour", i.e. where to install things.
Instead of looking at 3rd, let's look at last. This allows to override
flavour from template in a simple way.
Configurations/10-main.conf: define generic "flavour" in VC-common
template. Since VC-W32 was the only recognized "flavour", remove
"flavour" definitions from all targets/templates, but VC-WIN32. And
rename VC-W32 to VC-WOW.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5502)
We're currently using the attributes 'defines', 'cppflags', 'cflags'
etc quite liberally, with no regard for where that ends up. Quite a
few of those flags are actually only relevant for the libraries
(mostly libcrypto), so it's safe to say that those could be applied to
the libraries only.
So, we move some of those flags to 'lib_defines', 'lib_cppflags',
'lib_cflags', etc.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5560)
With the support of "make variables" comes the possibility for the
user to override them. However, we need to make a difference between
defaults that we use (and that should be overridable by the user) and
flags that are crucial for building OpenSSL (should not be
overridable).
Typically, overridable flags are those setting optimization levels,
warnings levels, that kind of thing, while non-overridable flags are,
for example, macros that indicate aspects of how the config target
should be treated, such as L_ENDIAN and B_ENDIAN.
We do that differentiation by allowing upper case attributes in the
config targets, named exactly like the "make variables" we support,
and reserving the lower case attributes for non-overridable project
flags.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5534)
-fno-common was removed for all Darwin targets in
0c8734198d with rationale "it's either
'ranlib -c' or '-fno-common'." However, it's still absolutely required
in 32-bit darwin-ppc-cc. And when trying things out I didn't quite
see why it was formulated as one-or-another choice, as 'ranlib -c'
shouldn't [and doesn't] have problems with object modules without
commons. [Well, to be frank, I didn't manage to reproduce the problem
the modification was meaning to resolve either...]
Reviewed-by: Rich Salz <rsalz@openssl.org>
In previous OpenSSL versions, this letter was part of the make
variable AR. However, following the usual convention (read: GNU),
this letter is supposed to be part of ARFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5386)
Avoid using crypto/modes/ghash-ia64.s, as it uses features that are
explicitely prohibited on VMS.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5357)
Instead of having the knowledge of the exact flags to run the C
preprocessor only and have it output on standard output in the deeper
recesses of the build file template, make it a config parameter, or
rely on build CPP in value ('$(CC) -E' on Unix).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5356)
All VMS config targets were literally copies of each other, only
differing in what argument the parameter seeking function vms_info()
received (the pointer size).
This could be hugely simplified by letting vms_info() detect what
pointer size was desired from the desired config target name instead.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5364)
It was a bit absurd to have this being specially handled in the build
file templates, especially that we have the 'includes' attribute.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5296)
Most modules are direct implementations of openssl application
sub-commands, but some constitute a support library, which can be used
by more than one program (and is, incidently, by test/uitest).
For practical purposes, we place the support library modules in a
private, static library.
Finally, there are some modules that don't have direct references in
the rest of the apps code, but are still crucial. See them as some
kind of extra crt0 or similar for your platform.
Inspiration from David von Oheimb
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5222)
C++ flags got the same config target value as C flags, but then
nothing else happened while C flags get all kinds of stuff added to
them (especially when --strict-warnings is used).
Now, C++ flags get the exact same treatment as C flags. However, this
only happens when a C++ compiler is specified, to avoid confusing
messages about added C++ flags.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5181)
