CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8447)
(cherry picked from commit 3dcbb6c4a3)
The previous commit fixed an underflow that may occur in ecp_nistp521.c.
This commit adds a test for that condition. It is heavily based on an
original test harness by Billy Brumley.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8405)
(cherry picked from commit 6855b496b2)
The function felem_diff_128_64 in ecp_nistp521.c substracts the number |in|
from |out| mod p. In order to avoid underflow it first adds 32p mod p
(which is equivalent to 0 mod p) to |out|. The comments and variable naming
suggest that the original author intended to add 64p mod p. In fact it
has been shown that with certain unusual co-ordinates it is possible to
cause an underflow in this function when only adding 32p mod p while
performing a point double operation. By changing this to 64p mod p the
underflow is avoided.
It turns out to be quite difficult to construct points that satisfy the
underflow criteria although this has been done and the underflow
demonstrated. However none of these points are actually on the curve.
Finding points that satisfy the underflow criteria and are also *on* the
curve is considered significantly more difficult. For this reason we do
not believe that this issue is currently practically exploitable and
therefore no CVE has been assigned.
This only impacts builds using the enable-ec_nistp_64_gcc_128 Configure
option.
With thanks to Bo-Yin Yang, Billy Brumley and Dr Liu for their significant
help in investigating this issue.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8405)
(cherry picked from commit 13fbce17fc)
Correctly describe the maximum IV length.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8406)
(cherry picked from commit 27d5631236)
ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for
every encryption operation. RFC 7539 specifies that the nonce value (IV)
should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and
front pads the nonce with 0 bytes if it is less than 12 bytes. However it
also incorrectly allows a nonce to be set of up to 16 bytes. In this case
only the last 12 bytes are significant and any additional leading bytes are
ignored.
It is a requirement of using this cipher that nonce values are unique.
Messages encrypted using a reused nonce value are susceptible to serious
confidentiality and integrity attacks. If an application changes the
default nonce length to be longer than 12 bytes and then makes a change to
the leading bytes of the nonce expecting the new value to be a new unique
nonce then such an application could inadvertently encrypt messages with a
reused nonce.
Additionally the ignored bytes in a long nonce are not covered by the
integrity guarantee of this cipher. Any application that relies on the
integrity of these ignored leading bytes of a long nonce may be further
affected.
Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe
because no such use sets such a long nonce value. However user
applications that use this cipher directly and set a non-default nonce
length to be longer than 12 bytes may be vulnerable.
CVE-2019-1543
Fixes#8345
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8406)
(cherry picked from commit 2a3d0ee9d5)
Sessions must be immutable once they can be shared with multiple threads.
We were breaking that rule by writing the ticket index into it during the
handshake. This can lead to incorrect behaviour, including failed
connections in multi-threaded environments.
Reported by David Benjamin.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8383)
(cherry picked from commit c96ce52ce2)
GNU strerror_r may return either a pointer to a string that the function
stores in buf, or a pointer to some (immutable) static string in which case
buf is unused.
In such a case we need to set buf manually.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8371)
(cherry picked from commit e3b35d2b29)
Use select to wait for /dev/random in readable state,
but do not actually read anything from /dev/random,
use /dev/urandom first.
Use linux define __NR_getrandom instead of the
glibc define SYS_getrandom, in case the kernel headers
are more current than the glibc headers.
Fixes#8215
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8251)
(cherry picked from commit 38023b87f0)
For C, -ansi is equivalent to -std=c90
For C++, -ansi is equivalent to -std=c++98
We also place -ansi in CPPFLAGS instead of the usual command line config,
to avoid getting it when linking (clang complains)
(cherry picked from commit 874f785988)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8359)
This makes `--strict-warnings` into a compiler pseudo-option, i.e. it
gets treated the same way as any other compiler option given on the
configuration command line, but is retroactively replaced by actual
compiler warning options, depending on what compiler is used.
This makes it easier to see in what order options are given to the
compiler from the configuration command line, i.e. this:
./config -Wall --strict-warnings
would give the compiler flags in the same order as they're given,
i.e.:
-Wall -Werror -Wno-whatever ...
instead of what we got previously:
-Werror -Wno-whatever ... -Wall
(cherry picked from commit fcee53948b)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8359)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8281)
(cherry picked from commit 54d00677f3)
Since the padlock code is an engine, the assembler is for a module,
not a library link to when building a program... there's a
distinction.
Fixes#2311
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8220)
(cherry picked from commit 88780b1c5f)
Currently SM2 shares the ameth with EC, so the current default digest
algorithm returned is SHA256. This fixes the default digest algorithm of
SM2 to SM3, which is the only valid digest algorithm for SM2 signature.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8186)
(cherry picked from commit e766f4a053)
This restores the behavior of previous versions of the /dev/crypto
engine, in alignment with the default implementation.
Reported-by: Gerard Looije <lglooije@hotmail.com>
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8306)
cipher_init may be called on an already initialized context, without a
necessary cleanup. This separates cleanup from initialization, closing
an eventual open session before creating a new one.
Move the /dev/crypto session cleanup code to its own function.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8306)
There is too high a risk that perl and OpenSSL are linked with
different C RTLs, and thereby get different messages for even the most
mundane error numbers.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8343)
(cherry picked from commit 565a19eef3)
The real cause for this change is that test/ec_internal_test.c
includes ec_lcl.h, and including curve448/curve448_lcl.h from there
doesn't work so well with compilers who always do inclusions relative
to the C file being compiled.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8334)
Thanks to David Benjamin who reported this, performed the analysis and
suggested the patch. I have incorporated some of his analysis in the
comments below.
This issue can cause an out-of-bounds read. It is believed that this was
not reachable until the recent "fixed top" changes. Analysis has so far
only identified one code path that can encounter this - although it is
possible that others may be found. The one code path only impacts 1.0.2 in
certain builds. The fuzzer found a path in RSA where iqmp is too large. If
the input is all zeros, the RSA CRT logic will multiply a padded zero by
iqmp. Two mitigating factors:
- Private keys which trip this are invalid (iqmp is not reduced mod p).
Only systems which take untrusted private keys care.
- In OpenSSL 1.1.x, there is a check which rejects the oversize iqmp,
so the bug is only reproducible in 1.0.2 so far.
Fortunately, the bug appears to be relatively harmless. The consequences of
bn_cmp_word's misbehavior are:
- OpenSSL may crash if the buffers are page-aligned and the previous page is
non-existent.
- OpenSSL will incorrectly treat two BN_ULONG buffers as not equal when they
are equal.
- Side channel concerns.
The first is indeed a concern and is a DoS bug. The second is fine in this
context. bn_cmp_word and bn_cmp_part_words are used to compute abs(a0 - a1)
in Karatsuba. If a0 = a1, it does not matter whether we use a0 - a1 or
a1 - a0. The third would be worth thinking about, but it is overshadowed
by the entire Karatsuba implementation not being constant time.
Due to the difficulty of tripping this and the low impact no CVE is felt
necessary for this issue.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8326)
(cherry picked from commit 576129cd72)
Ty Baen-Price explains:
> Problem and Resolution:
> The following lines of code make use of the Microsoft API ExitProcess:
>
> ```
> Apps\Speed.c line 335: ExitProcess(ret);
> Ms\uplink.c line 22: ExitProcess(1);
> ```
>
> These function calls are made after fatal errors are detected and
> program termination is desired. ExitProcess(), however causes
> _orderly_ shutdown of a process and all its threads, i.e. it unloads
> all dlls and runs all destructors. See MSDN for details of exactly
> what happens
> (https://msdn.microsoft.com/en-us/library/windows/desktop/ms682658(v=vs.85).aspx).
> The MSDN page states that ExitProcess should never be called unless
> it is _known to be safe_ to call it. These calls should simply be
> replaced with calls to TerminateProcess(), which is what should be
> called for _disorderly_ shutdown.
>
> An example of usage:
>
> ```
> TerminateProcess(GetCurrentProcess(), exitcode);
> ```
>
> Effect of Problem:
> Because of a compilation error (wrong c++ runtime), my program
> executed the uplink.c ExitProcess() call. This caused the single
> OpenSSL thread to start executing the destructors of all my dlls,
> and their objects. Unfortunately, about 30 other threads were
> happily using those objects at that time, eventually causing a
> 0xC0000005 ACCESS_VIOLATION. Obviously an ACCESS_VIOLATION is the
> best case scenario, as I'm sure you can imagine at the consequences
> of undiscovered memory corruption, even in a terminating process.
And on the subject of `TerminateProcess()` being asynchronous:
> That is technically true, but I think it's probably synchronous
> "enough" for your purposes, since a call to TerminateProcess
> suspends execution of all threads in the target process. This means
> it's really only asynchronous if you're calling TerminateProcess one
> some _other_ process. If you're calling TerminateProcess on your own
> process, you'll never return from the TerminateProcess call.
Fixes#2489
Was originally RT-4526
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8301)
(cherry picked from commit 9257959950)
Prior to this commit we were keeping a count of how many KeyUpdates we
have processed and failing if we had had too many. This simplistic approach
is not sufficient for long running connections. Since many KeyUpdates
would not be a particular good DoS route anyway, the simplest solution is
to simply remove the key update count.
Fixes#8068
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8299)
(cherry picked from commit 3409a5ff8a)
Fixes#7950
It was reported that there might be a null pointer dereference in the
implementation of the dasync_aes_128_cbc_hmac_sha1() cipher, because
EVP_aes_128_cbc_hmac_sha1() can return a null pointer if AES-NI is
not available. It took some analysis to find out that this is not
an issue in practice, and these comments explain the reason to comfort
further NPD hunters.
Detected by GitHub user @wurongxin1987 using the Sourcebrella Pinpoint
static analyzer.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8305)
(cherry picked from commit a4a0a1eb43)
The aes128_cbc_hmac_sha1 cipher in the dasync engine is broken. Probably
by commit e38c2e8535 which removed use of the "enc" variable...but not
completely.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8291)
(cherry picked from commit 695dd3a332)
The option is a flag for Options, not a standalone setting.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8292)
(cherry picked from commit 4ac5e43da6)
This commit adds a simple unit test to make sure that the constant-time
flag does not "leak" among BN_CTX frames:
- test_ctx_consttime_flag() initializes (and later frees before
returning) a BN_CTX object, then it calls in sequence
test_ctx_set_ct_flag() and test_ctx_check_ct_flag() using the same
BN_CTX object. The process is run twice, once with a "normal"
BN_CTX_new() object, then with a BN_CTX_secure_new() one.
- test_ctx_set_ct_flag() starts a frame in the given BN_CTX and sets the
BN_FLG_CONSTTIME flag on some of the BIGNUMs obtained from the frame
before ending it.
- test_ctx_check_ct_flag() then starts a new frame and gets a number of
BIGNUMs from it. In absence of leaks, none of the BIGNUMs in the new
frame should have BN_FLG_CONSTTIME set.
In actual BN_CTX usage inside libcrypto the leak could happen at any
depth level in the BN_CTX stack, with varying results depending on the
patterns of sibling trees of nested function calls sharing the same
BN_CTX object, and the effect of unintended BN_FLG_CONSTTIME on the
called BN_* functions.
This simple unit test abstracts away this complexity and verifies that
the leak does not happen between two sibling functions sharing the same
BN_CTX object at the same level of nesting.
(cherry picked from commit fe16ae5f95)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8253)
This commit adds a dedicated function in `EC_METHOD` to access a modular
field inversion implementation suitable for the specifics of the
implemented curve, featuring SCA countermeasures.
The new pointer is defined as:
`int (*field_inv)(const EC_GROUP*, BIGNUM *r, const BIGNUM *a, BN_CTX*)`
and computes the multiplicative inverse of `a` in the underlying field,
storing the result in `r`.
Three implementations are included, each including specific SCA
countermeasures:
- `ec_GFp_simple_field_inv()`, featuring SCA hardening through
blinding.
- `ec_GFp_mont_field_inv()`, featuring SCA hardening through Fermat's
Little Theorem (FLT) inversion.
- `ec_GF2m_simple_field_inv()`, that uses `BN_GF2m_mod_inv()` which
already features SCA hardening through blinding.
From a security point of view, this also helps addressing a leakage
previously affecting conversions from projective to affine coordinates.
This commit also adds a new error reason code (i.e.,
`EC_R_CANNOT_INVERT`) to improve consistency between the three
implementations as all of them could fail for the same reason but
through different code paths resulting in inconsistent error stack
states.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
(cherry picked from commit e0033efc30)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8262)
