Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #5400
In PR #5295 it was decided that the locking api should remain private
and used only inside libcrypto. However, the locking functions were added
back to `libcrypto.num` by `mkdef.pl`, because the function prototypes
were still listed in `internal/rand.h`. (This header contains functions
which are internal, but shared between libcrypto and libssl.)
This commit moves the prototypes to `rand_lcl.h` and changes the names
to lowercase, following the convention therein. It also corrects an
outdated documenting comment.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5375)
The NIST standard presents two alternative ways for seeding the
CTR DRBG, depending on whether a derivation function is used or not.
In Section 10.2.1 of NIST SP800-90Ar1 the following is assessed:
The use of the derivation function is optional if either an
approved RBG or an entropy source provides full entropy output
when entropy input is requested by the DRBG mechanism.
Otherwise, the derivation function shall be used.
Since the OpenSSL DRBG supports being reseeded from low entropy random
sources (using RAND_POOL), the use of a derivation function is mandatory.
For that reason we change the default and replace the opt-in flag
RAND_DRBG_FLAG_CTR_USE_DF with an opt-out flag RAND_DRBG_FLAG_CTR_NO_DF.
This change simplifies the RAND_DRBG_new() calls.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5294)
The functions drbg_setup() and drbg_cleanup() used to duplicate a lot of
code from RAND_DRBG_new() and RAND_DRBG_free(). This duplication has been
removed, which simplifies drbg_setup() and makes drbg_cleanup() obsolete.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5294)
This commit adds three new accessors to the internal DRBG lock
int RAND_DRBG_lock(RAND_DRBG *drbg)
int RAND_DRBG_unlock(RAND_DRBG *drbg)
int RAND_DRBG_enable_locking(RAND_DRBG *drbg)
The three shared DRBGs are intended to be used concurrently, so they
have locking enabled by default. It is the callers responsibility to
guard access to the shared DRBGs by calls to RAND_DRBG_lock() and
RAND_DRBG_unlock().
All other DRBG instances don't have locking enabled by default, because
they are intendended to be used by a single thread. If it is desired,
locking can be enabled by using RAND_DRBG_enable_locking().
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5294)
Remove the timer and TSC additional input code and instead provide a single
routine that attempts to use the "best" timer/counter available on the
system. It attempts to use TSC, then various OS dependent resources and
finally several tries to obtain the date. If any of these timer/counters
is successful, the rest are skipped.
No randomness is credited for this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5231)
The functions RAND_bytes() and RAND_priv_bytes() are now both based
on a common implementation using RAND_DRBG_bytes() (if the default
OpenSSL rand method is active). This not only simplifies the code
but also has the advantage that additional input from a high precision
timer is added on every generate call if the timer is available.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/5251)
When comparing the implementations of drbg_bytes() and RAND_DRBG_bytes(),
it was noticed that the former split the buffer into chunks when calling
RAND_DRBG_generate() to circumvent the size limitation of the buffer
to outlen <= drb->max_request. This loop was missing in RAND_DRBG_bytes(),
so it was adopted from drbg_bytes().
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/5251)
This check not only prevented the automatic reinstantiation of the
DRBG, which is implemented in RAND_DRBG_generate(), but also prevented
an error message from being generated in the case of failure.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/5251)
Conceptually, this is a squashed version of:
Revert "Address feedback"
This reverts commit 75551e07bd.
and
Revert "Add CRYPTO_thread_glock_new"
This reverts commit ed6b2c7938.
But there were some intervening commits that made neither revert apply
cleanly, so instead do it all as one shot.
The crypto global locks were an attempt to cope with the awkward
POSIX semantics for pthread_atfork(); its documentation (the "RATIONALE"
section) indicates that the expected usage is to have the prefork handler
lock all "global" locks, and the parent and child handlers release those
locks, to ensure that forking happens with a consistent (lock) state.
However, the set of functions available in the child process is limited
to async-signal-safe functions, and pthread_mutex_unlock() is not on
the list of async-signal-safe functions! The only synchronization
primitives that are async-signal-safe are the semaphore primitives,
which are not really appropriate for general-purpose usage.
However, the state consistency problem that the global locks were
attempting to solve is not actually a serious problem, particularly for
OpenSSL. That is, we can consider four cases of forking application
that might use OpenSSL:
(1) Single-threaded, does not call into OpenSSL in the child (e.g.,
the child calls exec() immediately)
For this class of process, no locking is needed at all, since there is
only ever a single thread of execution and the only reentrancy is due to
signal handlers (which are themselves limited to async-signal-safe
operation and should not be doing much work at all).
(2) Single-threaded, calls into OpenSSL after fork()
The application must ensure that it does not fork() with an unexpected
lock held (that is, one that would get unlocked in the parent but
accidentally remain locked in the child and cause deadlock). Since
OpenSSL does not expose any of its internal locks to the application
and the application is single-threaded, the OpenSSL internal locks
will be unlocked for the fork(), and the state will be consistent.
(OpenSSL will need to reseed its PRNG in the child, but that is
an orthogonal issue.) If the application makes use of locks from
libcrypto, proper handling for those locks is the responsibility of
the application, as for any other locking primitive that is available
for application programming.
(3) Multi-threaded, does not call into OpenSSL after fork()
As for (1), the OpenSSL state is only relevant in the parent, so
no particular fork()-related handling is needed. The internal locks
are relevant, but there is no interaction with the child to consider.
(4) Multi-threaded, calls into OpenSSL after fork()
This is the case where the pthread_atfork() hooks to ensure that all
global locks are in a known state across fork() would come into play,
per the above discussion. However, these "calls into OpenSSL after
fork()" are still subject to the restriction to async-signal-safe
functions. Since OpenSSL uses all sorts of locking and libc functions
that are not on the list of safe functions (e.g., malloc()), this
case is not currently usable and is unlikely to ever be usable,
independently of the locking situation. So, there is no need to
go through contortions to attempt to support this case in the one small
area of locking interaction with fork().
In light of the above analysis (thanks @davidben and @achernya), go
back to the simpler implementation that does not need to distinguish
"library-global" locks or to have complicated atfork handling for locks.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5089)
Some older glibc versions require the `-lrt` linker option for
resolving the reference to `clock_gettime'. Since it is not desired
to add new library dependencies in version 1.1.1, the call to
clock_gettime() is replaced by a call to gettimeofday() for the
moment. It will be added back in version 1.2.
Signed-off-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5199)
Fixes#5076
Since do_rand_drbg_init() allocates three locks, it needs to ensure
that OPENSSL_init_crypto() is called, otherwise these resources are
not cleaned up properly.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5083)
The DRGB concept described in NIST SP 800-90A provides for having different
algorithms to generate random output. In fact, the FIPS object module used to
implement three of them, CTR DRBG, HASH DRBG and HMAC DRBG.
When the FIPS code was ported to master in #4019, two of the three algorithms
were dropped, and together with those the entire code that made RAND_DRBG
generic was removed, since only one concrete implementation was left.
This commit restores the original generic implementation of the DRBG, making it
possible again to add additional implementations using different algorithms
(like RAND_DRBG_CHACHA20) in the future.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4998)
The generic part of the FIPS DRBG was implemented in fips_drbg_lib.c and the
algorithm specific parts in fips_drbg_<alg>.c for <alg> in {ctr, hash, hmac}.
Additionally, there was the module fips_drbg_rand.c which contained 'gluing'
code between the RAND_METHOD api and the FIPS DRBG.
When the FIPS code was ported to master in #4019, for some reason the ctr-drbg
implementation from fips_drbg_ctr.c ended up in drbg_rand.c instead of drbg_ctr.c.
This commit renames the module drbg_rand.c back to drbg_ctr.c, thereby restoring
a simple relationship between the original fips modules and the drbg modules
in master:
fips_drbg_lib.c => drbg_lib.c /* generic part of implementation */
fips_drbg_<alg>.c => drbg_<alg>.c /* algorithm specific implementations */
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4998)
Previously, the RAND_DRBG_uninstantiate() call was not exactly inverse to
RAND_DRBG_instantiate(), because some important member values of the
drbg->ctr member where cleared. Now these values are restored internally.
Signed-off-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4402)
Signed-off-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4402)
Every DRBG now supports automatic reseeding not only after a given
number of generate requests, but also after a specified time interval.
Signed-off-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4402)
A third shared DRBG is added, the so called master DRBG. Its sole purpose
is to reseed the two other shared DRBGs, the public and the private DRBG.
The randomness for the master DRBG is either pulled from the os entropy
sources, or added by the application using the RAND_add() call.
The master DRBG reseeds itself automatically after a given number of generate
requests, but can also be reseeded using RAND_seed() or RAND_add().
A reseeding of the master DRBG is automatically propagated to the public
and private DRBG. This construction fixes the problem, that up to now
the randomness provided by RAND_add() was added only to the public and
not to the private DRBG.
Signed-off-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4402)
It's argued that /WX allows to keep better focus on new code, which
motivates its comeback...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)
The drbg's lock must be held across calls to RAND_DRBG_generate()
to prevent simultaneous modification of internal state.
This was observed in practice with simultaneous SSL_new() calls attempting
to seed the (separate) per-SSL RAND_DRBG instances from the global
rand_drbg instance; this eventually led to simultaneous calls to
ctr_BCC_update() attempting to increment drbg->bltmp_pos for their
respective partial final block, violating the invariant that bltmp_pos < 16.
The AES operations performed in ctr_BCC_blocks() makes the race window
quite easy to trigger. A value of bltmp_pos greater than 16 induces
catastrophic failure in ctr_BCC_final(), with subtraction overflowing
and leading to an attempt to memset() to zero a very large range,
which eventually reaches an unmapped page and segfaults.
Provide the needed locking in get_entropy_from_parent(), as well as
fixing a similar issue in RAND_priv_bytes(). There is also an
unlocked call to RAND_DRBG_generate() in ssl_randbytes(), but the
requisite serialization is already guaranteed by the requirements on
the application's usage of SSL objects, and no further locking is
needed for correct behavior. In that case, leave a comment noting
the apparent discrepancy and the reason for its safety (at present).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4328)
The DRBG_RESEED state plays an analogue role to the |reseed_required_flag| in
Appendix B.3.4 of [NIST SP 800-90A Rev. 1]. The latter is a local variable,
the scope of which is limited to the RAND_DRBG_generate() function. Hence there
is no need for a DRBG_RESEED state outside of the generate function. This state
was removed and replaced by a local variable |reseed_required|.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4328)
Reseeding is handled very differently by the classic RAND_METHOD API
and the new RAND_DRBG api. These differences led to some problems when
the new RAND_DRBG was made the default OpenSSL RNG. In particular,
RAND_add() did not work as expected anymore. These issues are discussed
on the thread '[openssl-dev] Plea for a new public OpenSSL RNG API'
and in Pull Request #4328. This commit fixes the mentioned issues,
introducing the following changes:
- Replace the fixed size RAND_BYTES_BUFFER by a new RAND_POOL API which
facilitates collecting entropy by the get_entropy() callback.
- Don't use RAND_poll()/RAND_add() for collecting entropy from the
get_entropy() callback anymore. Instead, replace RAND_poll() by
RAND_POOL_acquire_entropy().
- Add a new function rand_drbg_restart() which tries to get the DRBG
in an instantiated state by all means, regardless of the current
state (uninstantiated, error, ...) the DRBG is in. If the caller
provides entropy or additional input, it will be used for reseeding.
- Restore the original documented behaviour of RAND_add() and RAND_poll()
(namely to reseed the DRBG immediately) by a new implementation based
on rand_drbg_restart().
- Add automatic error recovery from temporary failures of the entropy
source to RAND_DRBG_generate() using the rand_drbg_restart() function.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4328)
cryptilib.h is the second.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
The one creating the DRBG should instantiate it, it's there that we
know which parameters we should use to instantiate it.
This splits the rand init in two parts to avoid a deadlock
because when the global drbg is created it wands to call
rand_add on the global rand method.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #4268
The DRBG callbacks 'get_entropy()' and 'cleanup_entropy()' are designed
in such a way that the randomness buffer does not have to be allocated
by the calling function. It receives the address of a dynamically
allocated buffer from get_entropy() and returns this address to
cleanup_entropy(), where it is freed. If these two calls are properly
paired, the address can be stored in a stack local variable of the
calling function, so there is no need for having a 'randomness' member
(and a 'filled' member) in 'RAND_DRBG'.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4266)
With the introduction of RAND_poll_ex(), the `RAND_add()` calls were
replaced by meaningless cb(...). This commit changes the 'cb(...)'
calls back to 'rand_add(...)' calls by changing the signature as follows:
-int RAND_poll_ex(RAND_poll_fn cb, void *arg);
+int RAND_poll_ex(RAND_poll_cb rand_add, void *arg);
Changed the function typedef name to 'RAND_poll_cb' to emphasize the fact
that the function type represents a callback function.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4266)
Unlike the NIST DRBG standard, entropy counts are in bits and
buffer lengths are in bytes. This has lead to some confusion and
errors in the past, see my comment on PR 3789.
To clarify the destinction between entropy counts and buffer lengths,
a 'len' suffix has been added to all member names of RAND_DRBG which
represent buffer lengths:
- {min,max}_{entropy,adin,nonce,pers}
+ {min,max}_{entropy,adin,nonce,pers}len
This change makes naming also more consistent, as can be seen in the
diffs, for example:
- else if (adinlen > drbg->max_adin) {
+ else if (adinlen > drbg->max_adinlen) {
Also replaced all 'ent's by 'entropy's, following a suggestion of Paul Dale.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4266)
Try to put DRBG and rand_bytes buffers in secure heap
Read the TSC fewer times (but it's still not enabled).
Short-circuit return in win RAND_poll_ex; other minor tweaks and
format-fixes.
Use the _bytes version of rdrand/rdseed
Fix ia32cap checks.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4100)
Use atfork to count child forks, and reseed DRBG when the counts don't
match.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4101)
Add a new global DRBG for private keys used by RAND_priv_bytes.
Add BN_priv_rand() and BN_priv_rand_range() which use RAND_priv_bytes().
Change callers to use the appropriate BN_priv... function.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4076)
Give each SSL object it's own DRBG, chained to the parent global
DRBG which is used only as a source of randomness into the per-SSL
DRBG. This is used for all session, ticket, and pre-master secret keys.
It is NOT used for ECDH key generation which use only the global
DRBG. (Doing that without changing the API is tricky, if not impossible.)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4050)
If RAND_add wraps around, XOR with existing. Add test to drbgtest that
does the wrap-around.
Re-order seeding and stop after first success.
Add RAND_poll_ex()
Use the DF and therefore lower RANDOMNESS_NEEDED. Also, for child DRBG's,
mix in the address as the personalization bits.
Centralize the entropy callbacks, from drbg_lib to rand_lib.
(Conceptually, entropy is part of the enclosing application.)
Thanks to Dr. Matthias St Pierre for the suggestion.
Various code cleanups:
-Make state an enum; inline RANDerr calls.
-Add RAND_POLL_RETRIES (thanks Pauli for the idea)
-Remove most RAND_seed calls from rest of library
-Rename DRBG_CTX to RAND_DRBG, etc.
-Move some code from drbg_lib to drbg_rand; drbg_lib is now only the
implementation of NIST DRBG.
-Remove blocklength
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4019)
Instead of setting a "magic" global variable to force RAND to keep
consistent state and always generate the same bytestream, have
the fuzzing code install its own RAND_METHOD that does this. For
BN_RAND_DEBUG, we just don't do it; that debugging was about mucking
with BN's internal representation, not requiring predictable rand
bytes.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4025)
In 'crypto/rand/ossl_rand.c', a call to
'ASYNC_unblock_pause()' is missing in an error case.
CLA: trivial
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4020)
Add a new config param to specify how the CSPRNG should be seeded.
Illegal values or nonsensical combinations (e.g., anything other
than "os" on VMS or HP VOS etc) result in build failures.
Add RDSEED support.
Add RDTSC but leave it disabled for now pending more investigation.
Refactor and reorganization all seeding files (rand_unix/win/vms) so
that they are simpler.
Only require 128 bits of seeding material.
Many document improvements, including why to not use RAND_add() and the
limitations around using load_file/write_file.
Document RAND_poll().
Cleanup Windows RAND_poll and return correct status
More completely initialize the default DRBG.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3965)
Looking at
http://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-90Ar1.pdf
we see that in the CTR_DRBG_Update() algorithm (internal page number 51),
the provided input data is (after truncation to seedlen) xor-d with the
key and V vector (of length keylen and blocklen respectively). The comment
in ctr_XOR notes that xor-ing with 0 is the identity function, so we can
just ignore the case when the provided input is shorter than seedlen.
The code in ctr_XOR() then proceeds to xor the key with the input, up
to the amount of input present, and computes the remaining input that
could be used to xor with the V vector, before accessing a full 16-byte
stretch of the input vector and ignoring the calculated length. The correct
behavior is to respect the supplied input length and only xor the
indicated number of bytes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3971)
