X509_STORE_add_cert and X509_STORE_add_crl are changed to return
success if the object to be added was already found in the store, rather
than returning an error.
Raise errors if empty or malformed files are read when loading certificates
and CRLs.
Remove NULL checks and allow a segv to occur.
Add error handing for all calls to X509_STORE_add_c{ert|tl}
Refactor these two routines into one.
Bring the unit test for duplicate certificates up to date using the test
framework.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2830)
randtest, cipher_overhead_test, bioprintest, constant_time_test
Move test_bioprint to 04 group
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3228)
All tests from ecdhtest.c have been ported to evptests.txt
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3219)
95-test_external_boringssl.t had a specialised run() variant to prefix
the command output so it wouldn't disturb Test::Harness. This
functionality if now moved to the run() command, using the added
option 'prefix' that can be set to the string to prefix the output
with.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3201)
This test doesn't actually fail completely, but there's no real
pattern to distinguish which data files should be omitted when no-ec2m
is configured and which should not.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3103)
Fix some comments too
[skip ci]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3069)
Also, be less silent when installing, so possible errors are shown.
[extended tests]
Fixes#3005
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3007)
The code to do this incorrectly assumed that the protocol version
could be used as a valid cipher suite for the 'openssl cipher'
command. While this is true in some cases, that isn't something to be
trusted. Replace that assumption with code that takes the full
'openssl ciphers' command output and parses it to find the ciphers we
look for.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2956)
The internals tests for chacha, poly1305 and siphash were erroneously
made conditional on if mdc2 was enabled. Corrected to depend on the
correct algorithms being enabled instead.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2991)
Add a test recipe (test/recipes/15-test_ecparams.t) which uses 'openssl
ecparam' to check the test vectors.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2544)
This involves:
- A directory of valid and invalid PEM-encoded curves.
This is non-exhaustive and can be added to.
- A minor patch to 'openssl ecparam' to make it exit non-zero
when curve validation fails.
- A test recipe is added in a separate commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2544)
Check that we handle changes of ciphersuite between HRR and ServerHello
correctly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
Test that if the server selects a ciphersuite with a different hash from
the PSK in the original ClientHello, the second ClientHello does not
contain the PSK.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)
Add python cryptography testing instructions too
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2885)
Using a cert with Cyrillic characters, kindly supplied by Dmitry Belyavsky
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2943)
On some platforms, setting stdout to binary mode isn't quite enough,
which makes the result unusable. With -out, we have better control.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2939)
We already test DTLS protocol versions. For good measure, add some
DTLS tests with client auth to the new test framework, so that we can
remove the old tests without losing coverage.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This will make the individual external tests more easily selectable /
deselectable through the usual test selection mechanism.
This also moves external tests to group 95.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2902)
This allows a finer granularity when selecting which tests to run, and
makes the tests more vidible.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2901)
process. This means no AEAD ciphers and no XTS mode.
Update the test script that uses this output to test cipher suites to not
filter out the now missing cipher modes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2876)
We just check that if we insert a cookie into an HRR it gets echoed back
in the subsequent ClientHello.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2839)
AGL has a history of pointing out the idiosynchronies/laxness of the
openssl PEM parser in amusing ways. If we want this functionality to
stay present, we should test that it works.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2756)
Generate a fresh certificate and DSA private key in their respective PEM
files. Modify the resulting ASCII in various ways so as to produce input
files that might be generated by non-openssl programs (openssl always
generates "standard" PEM files, with base64 data in 64-character lines
except for a possible shorter last line).
Exercise various combinations of line lengths, leading/trailing
whitespace, non-base64 characters, comments, and padding, for both
unencrypted and encrypted files. (We do not have any other test coverage
that uses encrypted files, as far as I can see, and the parser enforces
different rules for the body of encrypted files.)
Add a recipe to parse these test files and verify that they contain the
expected string or are rejected, according to the expected status.
Some of the current behavior is perhaps suboptimal and could be revisited.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2756)
TODO(robpercival): Should actually test that the output certificate
contains the poison extension.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/843)
On VMS, file names with more than one period get all but the last get
escaped with a ^, so 21-key-update.conf.in becomes 21-key-update^.conf.in
That means that %conf_dependent_tests and %skip become useless unless
we massage the file names that are used as indexes.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2678)
Since 20-cert-select.conf will vary depending in no-dh and no-dsa,
don't check it against original when those options are selected
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2680)
Make sure we get an HRR in the right circumstances based on kex mode.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)
test/recipes/40-test_rehash.t uses test files from certs/demo, which
doesn't exist any longer. Have it use PEM files from test/ instead.
Because rehash wants only one certificate or CRL per file, we must
also filter those PEM files to produce test files with a single object
each.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2594)
Idea is to keep it last for all eternity, so that if you find yourself
in time-pressed situation and deem that fuzz test can be temporarily
skipped, you can terminate the test suite with less hesitation about
following tests that you would have originally missed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For TLS 1.3 we select certificates with signature algorithms extension
only. For ECDSA+SHA384 there is the additional restriction that the
curve must be P-384: since the test uses P-256 this should fail.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)
Now that we support internal tests properly, we can test wpacket even in
shared builds.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
It seems that the ssl test 20-cert-select.conf dislikes the lack of TLSv1.2
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2268)
The difference between the AIX MD5 password algorithm and the standard MD5
password algorithm is that in AIX there is no magic string while in the
standard MD5 password algorithm the magic string is "$1$"
Documentation of '-aixmd5' option of 'openssl passwd' command is added.
1 test is added in test/recipes/20-test-passwd.t
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2251)
Add certifcate selection tests: the certificate type is selected by cipher
string and signature algorithm.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2224)
One of the new tests uses a DH based ciphersuite. That test should be
disabled if DH is disabled.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2217)
It tests both the use of UI_METHOD (through the apps/apps.h API) and
wrapping an older style PEM password callback in a UI_METHOD.
Replace the earlier UI test with a run of this test program
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2204)
Check that signatures actually work, and that an incorrect signature
results in a handshake failure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
Previously SKE in TLSProxy only knew about one anonymous ciphersuite so
there was never a signature. Extend that to include a ciphersuite that is
not anonymous. This also fixes a bug where the existing SKE processing was
checking against the wrong anon ciphersuite value. This has a knock on
impact on the sslskewith0p test. The bug meant the test was working...but
entirely by accident!
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
TLSv1.3 introduces PSS based sigalgs. Offering these in a TLSv1.3 client
implies that the client is prepared to accept these sigalgs even in
TLSv1.2.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
We remove the separate CertificateStatus message for TLSv1.3, and instead
send back the response in the appropriate Certificate message extension.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
Also updates TLSProxy to be able to understand the format and parse the
contained extensions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
These tests depend on there being at least one protocol version below
TLSv1.3 enabled.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2144)
The CT tests in test_sslmessages require EC to be available, therefore
we must skip these if no-ec
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2153)
The previous commit fixed a bug where the EC point formats extensions did
not appear in the ServerHello. This should have been caught by
70-test_sslmessages but that test never tries an EC ciphersuite. This
updates the test to do that.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2153)
More importantly, port CRL test from boringSSL crypto/x509/x509_test.cc
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1775)
The indentation was a bit off in some of the perl files following the
extensions refactor.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move this module into the same place as other test helper modules. It
simplifies the code and keeps like things together.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Ensure the tests can find the checkhandshake module on all platforms
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Check that the extension framework properly handles extensions specific
to a protocol version
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make sure we did not break the unsafe legacy reneg checks with the extension
work.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The s_server option -status_file has been added so this test can be
enabled.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Repeat for various handshake types
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Extend test_tls13messages to additionally check the expected extensions
under different options given to s_client/s_server.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
In TLS1.3 some ServerHello extensions remain in the ServerHello, while
others move to the EncryptedExtensions message. This commit performs that
move.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
At this stage the message is just empty. We need to fill it in with
extension data.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There are some minor differences in the format of a ServerHello in TLSv1.3.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The best way to test the UI interface is currently by using an openssl
command that uses password_callback. The only one that does this is
'genrsa'.
Since password_callback uses a UI method derived from UI_OpenSSL(), it
ensures that one gets tested well enough as well.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2040)
Commit b3618f44 added a test for mac-then-encrypt. However the test fails
when running with "enable-tls1_3". The problem is that the test creates a
connection, which ends up being TLSv1.3. However it also restricts the
ciphers to a single mac-then-encrypt ciphersuite that is not TLSv1.3
compatible so the connection aborts and the test fails. Mac-then-encrypt
is not relevant to TLSv1.3, so the test should disable that protocol
version.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Test suite used from boring, written by David Benjamin.
Test driver converted from C++ to C.
Added a Perl program to check the testsuite file.
Extensive review feedback incorporated (thanks folks).
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Verify that the encrypt-then-mac negotiation is handled
correctly. Additionally, when compiled with no-asm, this test ensures
coverage for the constant-time MAC copying code in
ssl3_cbc_copy_mac. The proxy-based CBC padding test covers that as
well but it's nevertheless better to have an explicit handshake test
for mac-then-encrypt.
Reviewed-by: Andy Polyakov <appro@openssl.org>
TLSv1.3 has a NewSessionTicket message, but it is *completely* different to
the TLSv1.2 one and may as well have been called something else. This commit
removes the old style NewSessionTicket from TLSv1.3. We will have to add the
new style one back in later.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The previous commits put in place the logic to exchange key_share data. We
now need to do something with that information. In <= TLSv1.2 the equivalent
of the key_share extension is the ServerKeyExchange and ClientKeyExchange
messages. With key_share those two messages are no longer necessary.
The commit removes the SKE and CKE messages from the TLSv1.3 state machine.
TLSv1.3 is completely different to TLSv1.2 in the messages that it sends
and the transitions that are allowed. Therefore, rather than extend the
existing <=TLS1.2 state transition functions, we create a whole new set for
TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time
they will be amended.
The new TLSv1.3 transitions remove SKE and CKE completely. There's also some
cleanup for some stuff which is not relevant to TLSv1.3 and is easy to
remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN.
I also disable EXTMS for TLSv1.3. Using it was causing some added
complexity, so rather than fix it I removed it, since eventually it will not
be needed anyway.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Send a TLS1.4 ClientHello with supported_versions and get TLS1.3
Send a TLS1.3 ClientHello without supported_versions and get TLS1.2
Reviewed-by: Rich Salz <rsalz@openssl.org>
Prior to TLS1.3 we check that the received record version number is correct.
In TLS1.3 we need to ignore the record version number. This adds a test to
make sure we do it correctly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Use the newly added "executable" function rather than "system". Also filter
the output to add a prefix to every line so that the "ok" doesn't confuse
Test::More
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This just disables all tests that fail at the moment. Over time we will
want to go over these and figure out why they are failing (and fix them if
appropriate)
Reviewed-by: Richard Levitte <levitte@openssl.org>
This adds a test to the OpenSSL test suite to invoke the BoringSSL test
suite.
It assumes you have already compiled the ossl_shim (see previous commit).
It also assumes that you have an environment variable BORING_RUNNER_DIR
set up to point to the ssl/test/runner directory of a checkout of BoringSSL.
This has only been tested with a very old version of BoringSSL (from commit
f277add6c) - since that was the last known checkout where the shim compiles
successfully. Even with that version of BoringSSL this test will fail. There
are lots of Boring tests that are failing for various reasons. Some might
be due to bugs in OpenSSL, some might be due to features that BoringSSL has
that OpenSSL doesn't, some are due to assumptions about the way BoringSSL
behaves that are not true for OpenSSL etc.
To get the verbose BoringSSL test output, run like this:
VERBOSE=1 BORING_RUNNER_DIR=/path/to/boring/ssl/test/runner make \
TESTS="test_external" test
Reviewed-by: Richard Levitte <levitte@openssl.org>
test/shlibloadtest.c assumes all Unix style platforms use .so as
shared library extension. This is not the case for Mac OS X, which
uses .dylib. Instead of this, have the test recipe find out the
extension from configuration data.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1844)
This should demonstrate that the atexit() handling is working properly (or
at least not crashing) on process exit.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Also we disable TLS1.3 by default (use enable-tls1_3 to re-enable). This is
because this is a WIP and will not be interoperable with any other TLS1.3
implementation.
Finally, we fix some tests that started failing when TLS1.3 was disabled by
default.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Includes addition of the various options to s_server/s_client. Also adds
one of the new TLS1.3 ciphersuites.
This isn't "real" TLS1.3!! It's identical to TLS1.2 apart from the protocol
and the ciphersuite...and the ciphersuite is just a renamed TLS1.2 one (not
a "real" TLS1.3 ciphersuite).
Reviewed-by: Rich Salz <rsalz@openssl.org>
The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got
them after the reformat. This is the result of:
find . -name '*.pl' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.c' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.h' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
Then bn_prime.h was excluded since this is a generated file.
Note mkerr.pl has some changes in a heredoc for some help output, but
other lines there lack trailing whitespace too.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The TLSProxy::Record->new call hard-codes a version, like
70-test_sslrecords.t.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This is a regression test for
https://github.com/openssl/openssl/pull/1431. It tests a
maximally-padded record with each possible invalid offset.
This required fixing a bug in Message.pm where the client sending a
fatal alert followed by close_notify was still treated as success.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The tests will only work in no-shared builds because WPACKET is an
internal only API that does not get exported by the shared library.
Reviewed-by: Rich Salz <rsalz@openssl.org>
These tests take a very long time on some platforms, and arent't
always strictly necessary. This makes it possible to turn them
off. The necessary binaries are still built, though, in case
someone still wants to do a manual run.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The previous commit revealed a long standing problem where CertStatus
processing was broken in DTLS. This would have been revealed by better
testing - so add some!
Reviewed-by: Rich Salz <rsalz@openssl.org>
User can make Windows openssl.exe to treat command-line arguments
and console input as UTF-8 By setting OPENSSL_WIN32_UTF8 environment
variable (to any value). This is likely to be required for data
interchangeability with other OSes and PKCS#12 containers generated
with Windows CryptoAPI.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Test doesn't work on Windows with non-Greek locale, because of
Win32 perl[!] limitation, not OpenSSL. For example it passes on
Cygwin and MSYS...
Reviewed-by: Matt Caswell <matt@openssl.org>
Also, re-organize RSA check to use goto err.
Add a test case.
Try all checks, not just stopping at first (via Richard Levitte)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Originally PKCS#12 subroutines treated password strings as ASCII.
It worked as long as they were pure ASCII, but if there were some
none-ASCII characters result was non-interoperable. But fixing it
poses problem accessing data protected with broken password. In
order to make asscess to old data possible add retry with old-style
password.
Reviewed-by: Richard Levitte <levitte@openssl.org>
