Ensure OPENSSL_cleanse() is called on the premaster secret value calculated for GOST.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit b7ee4815f2)
Conflicts:
ssl/s3_srvr.c
Ensure the Kerberos pre-master secret has OPENSSL_cleanse called on it.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 4e3dbe37ca)
Currently we set change_cipher_spec_ok to 1 before calling
ssl3_get_cert_verify(). This is because this message is optional and if it
is not sent then the next thing we would expect to get is the CCS. However,
although it is optional, we do actually know whether we should be receiving
one in advance. If we have received a client cert then we should expect
a CertificateVerify message. By the time we get to this point we will
already have bombed out if we didn't get a Certificate when we should have
done, so it is safe just to check whether |peer| is NULL or not. If it is
we won't get a CertificateVerify, otherwise we will. Therefore we should
change the logic so that we only attempt to get the CertificateVerify if
we are expecting one, and not allow a CCS in this scenario.
Whilst this is good practice for TLS it is even more important for DTLS.
In DTLS messages can be lost. Therefore we may be in a situation where a
CertificateVerify message does not arrive even though one was sent. In that
case the next message the server will receive will be the CCS. This could
also happen if messages get re-ordered in-flight. In DTLS if
|change_cipher_spec_ok| is not set and a CCS is received it is ignored.
However if |change_cipher_spec_ok| *is* set then a CCS arrival will
immediately move the server into the next epoch. Any messages arriving for
the previous epoch will be ignored. This means that, in this scenario, the
handshake can never complete. The client will attempt to retransmit
missing messages, but the server will ignore them because they are the wrong
epoch. The server meanwhile will still be waiting for the CertificateVerify
which is never going to arrive.
RT#2958
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit a0bd649336)
Ensure all fatal errors transition into the new error state on the server
side.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cf9b0b6fb2)
Conflicts:
ssl/s3_srvr.c
Reusing an SSL object when it has encountered a fatal error can
have bad consequences. This is a bug in application code not libssl
but libssl should be more forgiving and not crash.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit a89db885e0)
Conflicts:
ssl/s3_srvr.c
ssl/ssl_stat.c
A 0-length ciphers list is never permitted. The old code only used to
reject an empty ciphers list for connections with a session ID. It
would later error out on a NULL structure, so this change just moves
the alert closer to the problem source.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 3ae91cfb32)
The ClientHello processing is insufficiently rigorous in its checks to make
sure that we don't read past the end of the message. This does not have
security implications due to the size of the underlying buffer - but still
needs to be fixed.
With thanks to Qinghao Tang for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit c9642eb1ff79a30e2c7632ef8267cc34cc2b0d79)
Fixed various missing return value checks in ssl3_send_newsession_ticket.
Also a mem leak on error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Conflicts:
ssl/s3_srvr.c
Conflicts:
ssl/s3_srvr.c
This should be a one off operation (subsequent invokation of the
script should not move them)
This commit is for the 1.0.1 changes
Reviewed-by: Tim Hudson <tjh@openssl.org>
indent will not alter them when reformatting comments
(cherry picked from commit 1d97c84351)
Conflicts:
crypto/bn/bn_lcl.h
crypto/bn/bn_prime.c
crypto/engine/eng_all.c
crypto/rc4/rc4_utl.c
crypto/sha/sha.h
ssl/kssl.c
ssl/t1_lib.c
Conflicts:
crypto/rc4/rc4_enc.c
crypto/x509v3/v3_scts.c
crypto/x509v3/v3nametest.c
ssl/d1_both.c
ssl/s3_srvr.c
ssl/ssl.h
ssl/ssl_locl.h
ssl/ssltest.c
ssl/t1_lib.c
Reviewed-by: Tim Hudson <tjh@openssl.org>
Fix to prevent use of DH client certificates without sending
certificate verify message.
If we've used a client certificate to generate the premaster secret
ssl3_get_client_key_exchange returns 2 and ssl3_get_cert_verify is
never called.
We can only skip the certificate verify message in
ssl3_get_cert_verify if the client didn't send a certificate.
Thanks to Karthikeyan Bhargavan for reporting this issue.
CVE-2015-0205
Reviewed-by: Matt Caswell <matt@openssl.org>
OpenSSL clients would tolerate temporary RSA keys in non-export
ciphersuites. It also had an option SSL_OP_EPHEMERAL_RSA which
enabled this server side. Remove both options as they are a
protocol violation.
Thanks to Karthikeyan Bhargavan for reporting this issue.
(CVE-2015-0204)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 4b4c1fcc88)
Conflicts:
doc/ssl/SSL_CTX_set_options.pod
From BoringSSL
- Send an alert when the client key exchange isn't correctly formatted.
- Reject overly short RSA ciphertexts to avoid a (benign) out-of-bounds memory access.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 4aecfd4d9f)
the session's version (server).
See also BoringSSL's commit bdf5e72f50e25f0e45e825c156168766d8442dde.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 9e189b9dc1)
once the ChangeCipherSpec message is received. Previously, the server would
set the flag once at SSL3_ST_SR_CERT_VRFY and again at SSL3_ST_SR_FINISHED.
This would allow a second CCS to arrive and would corrupt the server state.
(Because the first CCS would latch the correct keys and subsequent CCS
messages would have to be encrypted, a MitM attacker cannot exploit this,
though.)
Thanks to Joeri de Ruiter for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit e94a6c0ede)
Conflicts:
CHANGES
ssl/s3_srvr.c
When no-ssl3 is set only make SSLv3 disabled by default. Retain -ssl3
options for s_client/s_server/ssltest.
When no-ssl3-method is set SSLv3_*method() is removed and all -ssl3
options.
We should document this somewhere, e.g. wiki, FAQ or manual page.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 3881d8106d)
Conflicts:
util/mkdef.pl
(Original commit adb46dbc6d)
Use the new constant-time methods consistently in s3_srvr.c
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 455b65dfab)
that bad encryptions are treated like random session keys in constant
time.
(cherry picked from commit adb46dbc6d)
Reviewed-by: Rich Salz <rsalz@openssl.org>
The addition of SRP authentication needs to be checked in various places
to work properly. Specifically:
A certificate is not sent.
A certificate request must not be sent.
Server key exchange message must not contain a signature.
If appropriate SRP authentication ciphersuites should be chosen.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 8f5a8805b82d1ae81168b11b7f1506db9e047dec)
Conflicts:
ssl/s3_clnt.c
ssl/s3_lib.c
Only accept change cipher spec when it is expected instead of at any
time. This prevents premature setting of session keys before the master
secret is determined which an attacker could use as a MITM attack.
Thanks to KIKUCHI Masashi (Lepidum Co. Ltd.) for reporting this issue
and providing the initial fix this patch is based on.
Replace manual ASN.1 decoder with ASN1_get object. This
will decode the tag and length properly and check against
it does not exceed the supplied buffer length.
PR#3335
(cherry picked from commit b0308dddd1cc6a8e1de803ef29ba6da25ee072c2)
When sending an invalid version number alert don't change the
version number to the client version if a session is already
established.
Thanks to Marek Majkowski for additional analysis of this issue.
PR#3191
Submitted by: steve
Update maximum message size for certifiate verify messages to support
4096 bit RSA keys again as TLS v1.2 messages is two bytes longer.
Submitted by: Peter Sylvester <peter.sylvester@edelweb.fr>
Reviewed by: steve
- remove some unncessary SSL_err and permit
an srp user callback to allow a worker to obtain
a user verifier.
- cleanup and comments in s_server and demonstration
for asynchronous srp user lookup
Submitted by: Peter Sylvester <peter.sylvester@edelweb.fr>
Reviewed by: steve
Make SRP conformant to rfc 5054.
Changes are:
- removal of the addition state after client hello
- removal of all pre-rfc srp alert ids
- sending a fatal alert when there is no srp extension but when the
server wants SRP
- removal of unnecessary code in the client.
