The One&Done attack, which is described in a paper to appear in the
USENIX Security'18 conference, uses EM emanations to recover the values
of the bits that are obtained using BN_is_bit_set while constructing
the value of the window in BN_mod_exp_consttime. The EM signal changes
slightly depending on the value of the bit, and since the lookup of a
bit is surrounded by highly regular execution (constant-time Montgomery
multiplications) the attack is able to isolate the (very brief) part of
the signal that changes depending on the bit. Although the change is
slight, the attack recovers it successfully >90% of the time on several
phones and IoT devices (all with ARM processors with clock rates around
1GHz), so after only one RSA decryption more than 90% of the bits in
d_p and d_q are recovered correctly, which enables rapid recovery of
the full RSA key using an algorithm (also described in the paper) that
modifies the branch-and-prune approach for a situation in which the
exponents' bits are recovered with errors, i.e. where we do not know
a priori which bits are correctly recovered.
The mitigation for the attack is relatively simple - all the bits of
the window are obtained at once, along with other bits so that an
entire integer's worth of bits are obtained together using masking and
shifts, without unnecessarily considering each bit in isolation. This
improves performance somewhat (one call to bn_get_bits is faster than
several calls to BN_is_bit_set), so the attacker now gets one signal
snippet per window (rather than one per bit) in which the signal is
affected by all bits in the integer (rather than just the one bit).
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6276)
32-bit vector rotate instruction was defined from beginning, it
not being used from the start must be a brain-slip...
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6363)
Goal is to exercise AEAD ciphers in TLS-like sequence, i.e. 13-byte
AAD followed by payload. Update doc/man1/speed.pod accordingly.
[While we are at it, address even some styling and readability issues.]
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6311)
Under a mingw shell, the command line path conversion either mangles
file: URIs to something useless (file;C:\...) or not at all (which
can't be opened by the Windows C RTL unless we're really lucky), so we
simply skip testing them in that environment.
Fixes#6369
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6376)
OpenSSL 1.1.0 made the X509_LOOKUP_METHOD structure opaque, so
applications that were previously able to define a custom lookup method
are not able to be ported.
This commit adds getters and setters for each of the current fields of
X509_LOOKUP_METHOD, along with getters and setters on several associated
opaque types (such as X509_LOOKUP and X509_OBJECT).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6152)
It's freed with OPENSSL_free()
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6331)
Return immediately upon discovery of bad message digest.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6298)
In commit 6decf9436f, fourteen public symbols were removed from
util/libcrypto.num on the master branch and the following symbols
renumbered. Unfortunately, the symbols `OCSP_resp_get0_signer` and
`X509_get0_authority_key_id` were not adjusted accordingly on the
OpenSSL_1_1_0-stable branch. This commit fixes the collision by
doing a 'double swap'.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6278)
Also, modernize the code, so that it isn't trying to store a size_t
into an int, and then check the int's sign. :/
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6271)
In previous versions of OpenSSL, the documentation for PEM_read_*
said:
The callback B<must> return the number of characters in the
passphrase or 0 if an error occurred.
But since c82c346226, 0 is now treated as a non-error
return value. Applications that want to indicate an error need to
return -1 instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6271)
When signing or verifying a file using pkeyutl the input is supposed to
be a hash. Some algorithms sanity check the length of the input, while
others don't and silently truncate. To avoid accidents we check that the
length of the input looks sane.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6284)
This reverts commit a6f5b11634.
The EVP_PKEY_sign() function is intended for pre-hashed input which is
not supported by our EdDSA implementation.
See the discussion in PR 5880
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6284)
We check that the curve name associated with the point is the same as that
for the curve.
Fixes#6302
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6323)
TlsGetValue clears the last error even on success, so that callers may
distinguish it successfully returning NULL or failing. This error-mangling
behavior interferes with the caller's use of GetLastError. In particular
SSL_get_error queries the error queue to determine whether the caller should
look at the OS's errors. To avoid destroying state, save and restore the
Windows error.
Fixes#6299.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6316)
Per SEC 1, the curve coefficients must be padded up to size. See C.2's
definition of Curve, C.1's definition of FieldElement, and 2.3.5's definition
of how to encode the field elements in http://www.secg.org/sec1-v2.pdf.
This comes up for P-521, where b needs a leading zero.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6314)
Only check the CN against DNS name contraints if the
`X509_CHECK_FLAG_NEVER_CHECK_SUBJECT` flag is not set, and either the
certificate has no DNS subject alternative names or the
`X509_CHECK_FLAG_ALWAYS_CHECK_SUBJECT` flag is set.
Add pertinent documentation, and touch up some stale text about
name checks and DANE.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Don't apply DNS name constraints to the subject CN when there's a
least one DNS-ID subjectAlternativeName.
Don't apply DNS name constraints to subject CN's that are sufficiently
unlike DNS names. Checked name must have at least two labels, with
all labels non-empty, no trailing '.' and all hyphens must be
internal in each label. In addition to the usual LDH characters,
we also allow "_", since some sites use these for hostnames despite
all the standards.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
The TLSv1.3 spec requires us to use the client application traffic secret
during generation of the Finished message following a post handshake
authentication.
Fixes#6263
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6297)
Because TLS 1.3 sends more non-application data records some clients run
into problems because they don't expect SSL_read() to return and set
SSL_ERROR_WANT_READ after processing it.
This can cause problems for clients that use blocking I/O and use
select() to see if data is available. It can be cleared using
SSL_CTX_clear_mode().
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #6260
NULL-check for cipher is redundant, instead check if cipher->name is NULL
While here fix formatting of BIO_printf calls as suggested by Andy Polyakov.
CLA: trivial
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6282)
In TLSv1.2 and below we always cache new sessions by default on the server
side in the internal cache (even when we're using session tickets). This is
in order to support resumption from a session id.
In TLSv1.3 there is no session id. It is only possible to resume using the
ticket. Therefore, in the default case, there is no point in caching the
session in the internal store.
There is still a reason to call the external cache new session callback
because applications may be using the callbacks just to know about when
sessions are created (and not necessarily implementing a full cache). If
the application also implements the remove session callback then we are
forced to also store it in the internal cache so that we can create
timeout events. Otherwise the external cache could just fill up
indefinitely.
This mostly addresses the issue described in #5628. That issue also proposes
having an option to not create full stateless tickets when using the
internal cache. That aspect hasn't been addressed yet.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6293)
If the lengths of both names is 0 then don't attempt to do a memcmp.
Issue reported by Simon Friedberger, Robert Merget and Juraj Somorovsky.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6291)
This adds the possibility to exclude files by regexp in util/copy.pl
Partial fix for #3254
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6303)
--quiet stops warnings of this sort:
Cannot find "BIO_read_ex" in podpath: cannot find suitable replacement path, cannot resolve link
We know what causes these warnings, it's perfectly innocuous, and we
don't want to hear it any more.
Partial fix for #3254
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6304)
