The new ServerHello format is essentially now the same as the old TLSv1.2
one, but it must additionally include supported_versions. The version
field is fixed at TLSv1.2, and the version negotiation happens solely via
supported_versions.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4701)
Reduce RSA_MAX_PRIME_NUM to 5.
Remove no longer used RSA_MIN_PRIME_SIZE.
Make rsa_multip_cap honor RSA_MAX_PRIME_NUM.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4905)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4916)
If OPENSSL_init_crypto() hasn't been called yet when ERR_get_state()
is called, it need to be called early, so the base initialization is
done. On some platforms (those who support DSO functionality and
don't define OPENSSL_USE_NODELETE), that includes a call of
ERR_set_mark(), which calls this function again.
Furthermore, we know that ossl_init_thread_start(), which is called
later in ERR_get_state(), calls OPENSSL_init_crypto(0, NULL), except
that's too late.
Here's what happens without an early call of OPENSSL_init_crypto():
=> ERR_get_state():
=> CRYPTO_THREAD_get_local():
<= NULL;
# no state is found, so it gets allocated.
=> ossl_init_thread_start():
=> OPENSSL_init_crypto():
# Here, base_inited is set to 1
# before ERR_set_mark() call
=> ERR_set_mark():
=> ERR_get_state():
=> CRYPTO_THREAD_get_local():
<= NULL;
# no state is found, so it gets allocated!!!!!
=> ossl_init_thread_start():
=> OPENSSL_init_crypto():
# base_inited is 1,
# so no more init to be done
<= 1
<=
=> CRYPTO_thread_set_local():
<=
<=
<=
<= 1
<=
=> CRYPTO_thread_set_local() # previous value removed!
<=
Result: double allocation, and we have a leak.
By calling the base OPENSSL_init_crypto() early, we get this instead:
=> ERR_get_state():
=> OPENSSL_init_crypto():
# Here, base_inited is set to 1
# before ERR_set_mark() call
=> ERR_set_mark():
=> ERR_get_state():
=> OPENSSL_init_crypto():
# base_inited is 1,
# so no more init to be done
<= 1
=> CRYPTO_THREAD_get_local():
<= NULL;
# no state is found, so it gets allocated
# let's assume we got 0xDEADBEEF
=> ossl_init_thread_start():
=> OPENSSL_init_crypto():
# base_inited is 1,
# so no more init to be done
<= 1
<= 1
=> CRYPTO_thread_set_local():
<=
<=
<=
<= 1
=> CRYPTO_THREAD_get_local():
<= 0xDEADBEEF
<= 0xDEADBEEF
Result: no leak.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4913)
This got lost somehow. The methods to do makedepend on Windows and
VMS are hard coded for cl (Windows) and CC/DECC (VMS), because that's
what we currently support natively.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4907)
Remove some config attributes that just duplicate values that are
already there in other attributes.
Remove the special runs of mkdef.pl and mkrc.pl from build file
templates, as these are now done via GENERATE statements in
build.info.
Remove all references to ordinal files from build file templates, as
these are now treated via the GENERATE statements in build.info.
Also remove -shared flags and similar that are there in shared-info.pl
anyway. (in the case of darwin, it's mandatory, as -bundle and
-dynamiclib don't mix)
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4840)
Because this also includes handling all sorts of non-object files when
linking a program, shared library or DSO, this also includes allowing
general recognition of files such as .res files (compiled from .rc
files), or .def / .map / .opt files (for export and possibly
versioning of public symbols only).
This does mean that there's a tangible change for all build file
templates: they must now recognise and handle the `.o` extension,
which is used internally to recognise object files internally. This
extension was removed by common.tmpl before this change, but would
mean that the platform specific templates wouldn't know if "foo.map"
was originally "foo.map.o" (i.e. an object file in its own right) or
"foo.map" (an export definition file that should be treated as such,
not as an object file).
For the sake of simplifying things, we also modify util/mkdef.pl to
produce .def (Windows) and .opt (VMS) files that don't need additional
hackery.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4840)
This makes it possible to add build.info statements for using resource
files as well as linker scripts (.def for Windows, .map for Unix, and
.opt for VMS) is if they were source files. This requires changes in
the build file templates.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4840)
This will replace the use of Makefile.shared
This also means a small adjustment on how the attributes dso_cflags,
dso_cxxflags and dso_lflags are treated. They were previously treated
as an extension to shared_cflag, shared_cxxflag and shared_ldflag, but
they should really be regarded as alternatives instead, for example
for darwin, where -dynamiclib is used for shared libraries and -bundle
for DSOs.
We take the opportunity to clean out things that are redundant or
otherwise superfluous (for example the check of GNU ld on platforms
where it never existed).
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4840)
It will return the last expression from the input file.
We also use this in read_config, which slightly changes what's
expected of Configurations/*.conf. They do not have to assign
%targets specifically. On the other hand, the table of configs MUST
be the last expression in each of those files.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4840)
This commit contains suggestion that (hopefully) improve the
documentation in ssl.pod.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4914)
As per documentation, the RSA keys should not be smaller than 64bit (the
documentation mentions something about a quirk in the prime generation
algorithm). I am adding check into the code which used to be 16 for some
reason.
My primary motivation is to get rid of the last sentence in the
documentation which suggest that typical keys have 1024 bits (instead
updating it to the now default 2048).
I *assume* that keys less than the 2048 bits (say 512) are used for
education purposes.
The 512 bits as the minimum have been suggested by Bernd Edlinger.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4547)
In 20-cert-select.conf there is a TLSv1.1 specific test which we should
skip if TLSv1.1. is disabled.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4890)
The tests in 25-cipher.conf all use TLSv1.2 ciphersuites so we shouldn't
run it if we don't have TLSv1.2
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4889)
check is already made 10 line above.
clean commented code
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4885)
Generate keys using EVP_CIPHER's key generation routine to support
keys of a specific form.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4842)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4843)
I noticed that some of the BIO_METHOD structs are placing the name on
the same line as the type and some don't. This commit places the name
on a separate line for consistency (which looks like what the majority
do)
CLA: trivial
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4878)
Expression '...' is always true.
The 'b->init' variable is assigned values twice successively
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4753)
Pointer 'o' is set inside a local buffer, so it can't be NULL.
Also fix coding style and add comments
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4754)
s_client -status is not available in this configuration.
While here, remove an outdated TODO(TLS1.3) comment.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4873)
make_dummy_resp() uses OCSP types, and get_cert_and_key() is unused
once make_dummy_resp() is compiled out, so neither can be included
in the build when OCSP is disabled and strict warnings are active.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4873)
There's no reason to wrap this call in TEST_true() if we're not
checking the return value of TEST_true() -- all of the surrounding
similar calls do not have the macro wrapping them.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4873)
Avoid memory leaks in error paths, and correctly apply
parentheses to function calls in a long if-chain.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4873)
Otherwise, any command that relies on ssl modules may fail, because
SSL_add_ssl_module() will be called after the config file has already
been loaded.
Fixes#4788
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4792)
IF OPENSSL_init_ssl() is called with the option flag
OPENSSL_INIT_LOAD_CONFIG, any SSL config will be handled wrongly
(i.e. there will be an attempt to load libssl_conf.so or whatever
corresponds to that on non-Unix platforms). Therefore, at least
SSL_add_ssl_module() MUST be called before OPENSSL_init_crypto() is
called. The base ssl init does that, plus adds all kinds of ciphers
and digests, which is harmless.
Fixes#4788
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4792)
