CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9275)
This commit adds a dedicated function in `EC_METHOD` to access a modular
field inversion implementation suitable for the specifics of the
implemented curve, featuring SCA countermeasures.
The new pointer is defined as:
`int (*field_inv)(const EC_GROUP*, BIGNUM *r, const BIGNUM *a, BN_CTX*)`
and computes the multiplicative inverse of `a` in the underlying field,
storing the result in `r`.
Three implementations are included, each including specific SCA
countermeasures:
- `ec_GFp_simple_field_inv()`, featuring SCA hardening through
blinding.
- `ec_GFp_mont_field_inv()`, featuring SCA hardening through Fermat's
Little Theorem (FLT) inversion.
- `ec_GF2m_simple_field_inv()`, that uses `BN_GF2m_mod_inv()` which
already features SCA hardening through blinding.
From a security point of view, this also helps addressing a leakage
previously affecting conversions from projective to affine coordinates.
This commit also adds a new error reason code (i.e.,
`EC_R_CANNOT_INVERT`) to improve consistency between the three
implementations as all of them could fail for the same reason but
through different code paths resulting in inconsistent error stack
states.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
(cherry picked from commit e0033efc30)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8262)
The original 1.1.1 design was to use SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal start/end of a post-handshake message
exchange in TLSv1.3. Unfortunately experience has shown that this confuses
some applications who mistake it for a TLSv1.2 renegotiation. This means
that KeyUpdate messages are not handled properly.
This commit removes the use of SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal the start/end of a post-handshake
message exchange. Individual post-handshake messages are still signalled in
the normal way.
This is a potentially breaking change if there are any applications already
written that expect to see these TLSv1.3 events. However, without it,
KeyUpdate is not currently usable for many applications.
Fixes#8069
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8096)
(cherry picked from commit 4af5836b55)
When computing the end-point shared secret, don't take the
terminating NULL character into account.
Please note that this fix breaks interoperability with older
versions of OpenSSL, which are not fixed.
Fixes#7956
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7957)
(cherry picked from commit 09d62b336d)
It turns out that the strictness that was implemented in
EVP_PKEY_asn1_new() (see Github openssl/openssl#6880) was badly placed
for some usages, and that it's better to do this check only when the
method is getting registered.
Fixes#7758
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7847)
(cherry picked from commit a860031621)
Also adds missing copyright boilerplate to util/mktar.sh
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7696)
(cherry picked from commit b42922ea2f)
Replace ECDH_KDF_X9_62() with internal ecdh_KDF_X9_63()
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7345)
(cherry picked from commit ffd89124bd)
In pull request #4328 the seeding of the DRBG via RAND_add()/RAND_seed()
was implemented by buffering the data in a random pool where it is
picked up later by the rand_drbg_get_entropy() callback. This buffer
was limited to the size of 4096 bytes.
When a larger input was added via RAND_add() or RAND_seed() to the DRBG,
the reseeding failed, but the error returned by the DRBG was ignored
by the two calling functions, which both don't return an error code.
As a consequence, the data provided by the application was effectively
ignored.
This commit fixes the problem by a more efficient implementation which
does not copy the data in memory and by raising the buffer the size limit
to INT32_MAX (2 gigabytes). This is less than the NIST limit of 2^35 bits
but it was chosen intentionally to avoid platform dependent problems
like integer sizes and/or signed/unsigned conversion.
Additionally, the DRBG is now less permissive on errors: In addition to
pushing a message to the openssl error stack, it enters the error state,
which forces a reinstantiation on next call.
Thanks go to Dr. Falko Strenzke for reporting this issue to the
openssl-security mailing list. After internal discussion the issue
has been categorized as not being security relevant, because the DRBG
reseeds automatically and is fully functional even without additional
randomness provided by the application.
Fixes#7381
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7382)
(cherry picked from commit 3064b55134)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6870)
This commit leverages the Montgomery ladder scaffold introduced in #6690
(alongside a specialized Lopez-Dahab ladder for binary curves) to
provide a specialized differential addition-and-double implementation to
speedup prime curves, while keeping all the features of
`ec_scalar_mul_ladder` against SCA attacks.
The arithmetic in ladder_pre, ladder_step and ladder_post is auto
generated with tooling, from the following formulae:
- `ladder_pre`: Formula 3 for doubling from Izu-Takagi "A fast parallel
elliptic curve multiplication resistant against side channel attacks",
as described at
https://hyperelliptic.org/EFD/g1p/auto-shortw-xz.html#doubling-dbl-2002-it-2
- `ladder_step`: differential addition-and-doubling Eq. (8) and (10)
from Izu-Takagi "A fast parallel elliptic curve multiplication
resistant against side channel attacks", as described at
https://hyperelliptic.org/EFD/g1p/auto-shortw-xz.html#ladder-ladd-2002-it-3
- `ladder_post`: y-coordinate recovery using Eq. (8) from Brier-Joye
"Weierstrass Elliptic Curves and Side-Channel Attacks", modified to
work in projective coordinates.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6772)
The old numbers where all generated for an 80 bit security level. But
the number should depend on security level you want to reach. For bigger
primes we want a higher security level and so need to do more tests.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #6075Fixes: #6012
This changes the security level from 100 to 128 bit.
We only have 1 define, this sets it to the highest level supported for
DSA, and needed for keys larger than 3072 bit.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #6075
The result is that we don't have to produce different names on
different platforms, and we won't have confusion on Windows depending
on if the script was built with mingw or with MSVC.
Partial fix for #3254
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6764)
This commit uses the new ladder scaffold to implement a specialized
ladder step based on differential addition-and-doubling in mixed
Lopez-Dahab projective coordinates, modified to independently blind the
operands.
The arithmetic in `ladder_pre`, `ladder_step` and `ladder_post` is
auto generated with tooling:
- see, e.g., "Guide to ECC" Alg 3.40 for reference about the
`ladder_pre` implementation;
- see https://www.hyperelliptic.org/EFD/g12o/auto-code/shortw/xz/ladder/mladd-2003-s.op3
for the differential addition-and-doubling formulas implemented in
`ladder_step`;
- see, e.g., "Fast Multiplication on Elliptic Curves over GF(2**m)
without Precomputation" (Lopez and Dahab, CHES 1999) Appendix Alg Mxy
for the `ladder_post` implementation to recover the `(x,y)` result in
affine coordinates.
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Co-authored-by: Sohaib ul Hassan <soh.19.hassan@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
for specialized Montgomery ladder implementations
PR #6009 and #6070 replaced the default EC point multiplication path for
prime and binary curves with a unified Montgomery ladder implementation
with various timing attack defenses (for the common paths when a secret
scalar is feed to the point multiplication).
The newly introduced default implementation directly used
EC_POINT_add/dbl in the main loop.
The scaffolding introduced by this commit allows EC_METHODs to define a
specialized `ladder_step` function to improve performances by taking
advantage of efficient formulas for differential addition-and-doubling
and different coordinate systems.
- `ladder_pre` is executed before the main loop of the ladder: by
default it copies the input point P into S, and doubles it into R.
Specialized implementations could, e.g., use this hook to transition
to different coordinate systems before copying and doubling;
- `ladder_step` is the core of the Montgomery ladder loop: by default it
computes `S := R+S; R := 2R;`, but specific implementations could,
e.g., implement a more efficient formula for differential
addition-and-doubling;
- `ladder_post` is executed after the Montgomery ladder loop: by default
it's a noop, but specialized implementations could, e.g., use this
hook to transition back from the coordinate system used for optimizing
the differential addition-and-doubling or recover the y coordinate of
the result point.
This commit also renames `ec_mul_consttime` to `ec_scalar_mul_ladder`,
as it better corresponds to what this function does: nothing can be
truly said about the constant-timeness of the overall execution of this
function, given that the underlying operations are not necessarily
constant-time themselves.
What this implementation ensures is that the same fixed sequence of
operations is executed for each scalar multiplication (for a given
EC_GROUP), with no dependency on the value of the input scalar.
Co-authored-by: Sohaib ul Hassan <soh.19.hassan@gmail.com>
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
This allows operation inside a chroot environment without having the
random device present.
A new call, RAND_keep_random_devices_open(), has been introduced that can
be used to control file descriptor use by the random seed sources. Some
seed sources maintain open file descriptors by default, which allows
such sources to operate in a chroot(2) jail without the associated device
nodes being available.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6432)
This extends the recently added ECDSA signature blinding to blind DSA too.
This is based on side channel attacks demonstrated by Keegan Ryan (NCC
Group) for ECDSA which are likely to be able to be applied to DSA.
Normally, as in ECDSA, during signing the signer calculates:
s:= k^-1 * (m + r * priv_key) mod order
In ECDSA, the addition operation above provides a sufficient signal for a
flush+reload attack to derive the private key given sufficient signature
operations.
As a mitigation (based on a suggestion from Keegan) we add blinding to
the operation so that:
s := k^-1 * blind^-1 (blind * m + blind * r * priv_key) mod order
Since this attack is a localhost side channel only no CVE is assigned.
This commit also tweaks the previous ECDSA blinding so that blinding is
only removed at the last possible step.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6522)
This commit implements coordinate blinding, i.e., it randomizes the
representative of an elliptic curve point in its equivalence class, for
prime curves implemented through EC_GFp_simple_method,
EC_GFp_mont_method, and EC_GFp_nist_method.
This commit is derived from the patch
https://marc.info/?l=openssl-dev&m=131194808413635 by Billy Brumley.
Coordinate blinding is a generally useful side-channel countermeasure
and is (mostly) free. The function itself takes a few field
multiplicationss, but is usually only necessary at the beginning of a
scalar multiplication (as implemented in the patch). When used this way,
it makes the values that variables take (i.e., field elements in an
algorithm state) unpredictable.
For instance, this mitigates chosen EC point side-channel attacks for
settings such as ECDH and EC private key decryption, for the
aforementioned curves.
For EC_METHODs using different coordinate representations this commit
does nothing, but the corresponding coordinate blinding function can be
easily added in the future to extend these changes to such curves.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6501)
Keegan Ryan (NCC Group) has demonstrated a side channel attack on an
ECDSA signature operation. During signing the signer calculates:
s:= k^-1 * (m + r * priv_key) mod order
The addition operation above provides a sufficient signal for a
flush+reload attack to derive the private key given sufficient signature
operations.
As a mitigation (based on a suggestion from Keegan) we add blinding to
the operation so that:
s := k^-1 * blind^-1 (blind * m + blind * r * priv_key) mod order
Since this attack is a localhost side channel only no CVE is assigned.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When signing or verifying a file using pkeyutl the input is supposed to
be a hash. Some algorithms sanity check the length of the input, while
others don't and silently truncate. To avoid accidents we check that the
length of the input looks sane.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6284)
Because TLS 1.3 sends more non-application data records some clients run
into problems because they don't expect SSL_read() to return and set
SSL_ERROR_WANT_READ after processing it.
This can cause problems for clients that use blocking I/O and use
select() to see if data is available. It can be cleared using
SSL_CTX_clear_mode().
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #6260
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6070)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6070)
