Reduce RSA_MAX_PRIME_NUM to 5.
Remove no longer used RSA_MIN_PRIME_SIZE.
Make rsa_multip_cap honor RSA_MAX_PRIME_NUM.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4905)
As per documentation, the RSA keys should not be smaller than 64bit (the
documentation mentions something about a quirk in the prime generation
algorithm). I am adding check into the code which used to be 16 for some
reason.
My primary motivation is to get rid of the last sentence in the
documentation which suggest that typical keys have 1024 bits (instead
updating it to the now default 2048).
I *assume* that keys less than the 2048 bits (say 512) are used for
education purposes.
The 512 bits as the minimum have been suggested by Bernd Edlinger.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4547)
Multi-prime RSA security is not determined by modulus length alone, but
depends even on number of primes. Too many primes render security
inadequate, but there is no common amount of primes or common factors'
length that provide equivalent secuity promise as two-prime for given
modulus length. Maximum amount of permitted primes is determined
according to following table.
<1024 | >=1024 | >=4096 | >=8192
------+--------+--------+-------
2 | 3 | 4 | 5
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4791)
* Introduce RSA_generate_multi_prime_key to generate multi-prime
RSA private key. As well as the following functions:
RSA_get_multi_prime_extra_count
RSA_get0_multi_prime_factors
RSA_get0_multi_prime_crt_params
RSA_set0_multi_prime_params
RSA_get_version
* Support EVP operations for multi-prime RSA
* Support ASN.1 operations for multi-prime RSA
* Support multi-prime check in RSA_check_key_ex
* Support multi-prime RSA in apps/genrsa and apps/speed
* Support multi-prime RSA manipulation functions
* Test cases and documentation are added
* CHANGES is updated
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4241)
Around 138 distinct errors found and fixed; thanks!
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)
A new method is added to EVP_PKEY_METH as:
int (*check) (EVP_PKEY_CTX *ctx);
and to EVP_PKEY_ASN1_METHOD as:
int (*pkey_check) (EVP_PKEY_CTX *ctx);
This is used to check the validity of a specific key.
The order of calls is:
EVP_PKEY_check -> pmeth.check -> ameth.pkey_check.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4337)
Removed e_os.h from all bar three headers (apps/apps.h crypto/bio/bio_lcl.h and
ssl/ssl_locl.h).
Added e_os.h into the files that need it now.
Directly reference internal/nelem.h when required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
this part contains only the return (x) fix.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4223)
If RAND_add wraps around, XOR with existing. Add test to drbgtest that
does the wrap-around.
Re-order seeding and stop after first success.
Add RAND_poll_ex()
Use the DF and therefore lower RANDOMNESS_NEEDED. Also, for child DRBG's,
mix in the address as the personalization bits.
Centralize the entropy callbacks, from drbg_lib to rand_lib.
(Conceptually, entropy is part of the enclosing application.)
Thanks to Dr. Matthias St Pierre for the suggestion.
Various code cleanups:
-Make state an enum; inline RANDerr calls.
-Add RAND_POLL_RETRIES (thanks Pauli for the idea)
-Remove most RAND_seed calls from rest of library
-Rename DRBG_CTX to RAND_DRBG, etc.
-Move some code from drbg_lib to drbg_rand; drbg_lib is now only the
implementation of NIST DRBG.
-Remove blocklength
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4019)
The memory blocks contain secret data and must be
cleared before returning to the system heap.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4062)
To make it consistent in the code base
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3749)
Add "*" as indicator meaning the function/reason is removed, so put an
empty string in the function/reason string table; this preserves backward
compatibility by keeping the #define's.
In state files, trailing backslash means text is on the next line.
Add copyright to state files
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3640)
Run perltidy on util/mkerr
Change some mkerr flags, write some doc comments
Make generated tables "const" when genearting lib-internal ones.
Add "state" file for mkerr
Renerate error tables and headers
Rationalize declaration of ERR_load_XXX_strings
Fix out-of-tree build
Add -static; sort flags/vars for options.
Also tweak code output
Moved engines/afalg to engines (from master)
Use -static flag
Standard engine #include's of errors
Don't linewrap err string tables unless necessary
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3392)
It is not necessary to remove leading zeros here because
RSA_padding_check_PKCS1_OAEP_mgf1 appends them again. As this was not done
in constant time, this might have leaked timing information.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3313)
Replace all remaining uses of LONG and ZLONG with INT32 / ZINT32.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3126)
and RSA_verify_PKCS1_PSS_mgf1 with 512-bit RSA vs. sha-512.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2801)
- FLAT_INC
- PKCS1_CHECK (the SSL_OP_PKCS1_CHECK options have been
no-oped)
- PKCS_TESTVECT (debugging leftovers)
- SSL_AD_MISSING_SRP_USERNAME (unfinished feature)
- DTLS_AD_MISSING_HANDSHAKE_MESSAGE (unfinished feature)
- USE_OBJ_MAC (note this removes a define from the public header but
very unlikely someone would be depending on it)
- SSL_FORBID_ENULL
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
If a key contains any PSS parameter restrictions set them during
sign or verification initialisation. Parameters now become the
default values for sign/verify. Digests are fixed and any attempt
to change them is an error. The salt length can be modified but
must not be less than the minimum value.
If the key parameters are invalid then verification or signing
initialisation returns an error.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
New function rsa_pss_get_param to extract and sanity check PSS parameters.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
Pad mode setting returns an error if the mode is anything other then PSS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
New function EVP_PKEY_CTX_md() which takes a string and passes a digest
to a ctrl.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
Add support for common operations in PSS by adding a new function
RSA_pkey_ctx_ctrl() which calls EVP_PKEY_CTX_ctrl if the key type
is RSA or PSS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
Print out RSA-PSS key parameters if present.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
For RSA PSS keys encode and decode parameters when handling public
and private keys.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
Split PSS parameter creation. This adds a new function rsa_pss_params_create
which creates PSS parameters from digest and salt values. This will be
used for PSS key generation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
Make RSA method more flexible by using the key type from the
method instead of hard coding EVP_PKEY_RSA: by doing this the
same code supports both RSA and RSA-PSS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
Store hash algorithm used for MGF1 masks in PSS and OAEP modes in PSS and
OAEP parameter structure: this avoids the need to decode part of the ASN.1
structure every time it is used.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
Both strdup or malloc failure should raise à err.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1905)
Factorise multiple bn_get_top(group->field) calls
Add missing checks on some conditional BN_copy return value
Add missing checks on some BN_copy return value
Add missing checks on a few bn_wexpand return value
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1626)
RFC 3447, section 8.2.2, steps 3 and 4 states that verifiers must encode
the DigestInfo struct and then compare the result against the public key
operation result. This implies that one and only one encoding is legal.
OpenSSL instead parses with crypto/asn1, then checks that the encoding
round-trips, and allows some variations for the parameter. Sufficient
laxness in this area can allow signature forgeries, as described in
https://www.imperialviolet.org/2014/09/26/pkcs1.html
Although there aren't known attacks against OpenSSL's current scheme,
this change makes OpenSSL implement the algorithm as specified. This
avoids the uncertainty and, more importantly, helps grow a healthy
ecosystem. Laxness beyond the spec, particularly in implementations
which enjoy wide use, risks harm to the ecosystem for all. A signature
producer which only tests against OpenSSL may not notice bugs and
accidentally become widely deployed. Thus implementations have a
responsibility to honor the specification as tightly as is practical.
In some cases, the damage is permanent and the spec deviation and
security risk becomes a tax all implementors must forever pay, but not
here. Both BoringSSL and Go successfully implemented and deployed
RSASSA-PKCS1-v1_5 as specified since their respective beginnings, so
this change should be compatible enough to pin down in future OpenSSL
releases.
See also https://tools.ietf.org/html/draft-thomson-postel-was-wrong-00
As a bonus, by not having to deal with sign/verify differences, this
version is also somewhat clearer. It also more consistently enforces
digest lengths in the verify_recover codepath. The NID_md5_sha1 codepath
wasn't quite doing this right.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1474
Also, re-organize RSA check to use goto err.
Add a test case.
Try all checks, not just stopping at first (via Richard Levitte)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)
The flags RSA_FLAG_NO_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME and
DH_FLAG_NO_EXP_CONSTTIME which previously provided the ability to switch
off the constant time implementation for RSA, DSA and DH have been made
no-ops and deprecated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The rsa_cms_encrypt() function allocates an ASN1_OCTET_STRING but can
then fail to free it in an error condition.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The diverse {RSA,DSA,DH}_set0_* functions are made to allow some
parameters to be NULL IF the corresponding numbers in the given key
structure have already been previously initialised. Specifically,
this allows the addition of private components to be added to a key
that already has the public half, approximately like this:
RSA_get0_key(rsa, NULL, &e, NULL);
RSA_get0_factors(rsa, &p, &q);
/* calculate new d */
RSA_set0_key(rsa, NULL, NULL, d);
Reviewed-by: Matt Caswell <matt@openssl.org>
The Unix build was the last to retain the classic build scheme. The
new unified scheme has matured enough, even though some details may
need polishing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Move rsa_meth_st away from public headers.
Add RSA_METHOD creator/destructor functions.
Add RSA_METHOD accessor/writer functions.
Adapt all other source to use the creator, destructor, accessors and writers.
Reviewed-by: Matt Caswell <matt@openssl.org>
Move rsa_st away from public headers.
Add accessor/writer functions for the public RSA data.
Adapt all other source to use the accessors and writers.
Reviewed-by: Matt Caswell <matt@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
