The new ServerHello format is essentially now the same as the old TLSv1.2
one, but it must additionally include supported_versions. The version
field is fixed at TLSv1.2, and the version negotiation happens solely via
supported_versions.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4701)
As per documentation, the RSA keys should not be smaller than 64bit (the
documentation mentions something about a quirk in the prime generation
algorithm). I am adding check into the code which used to be 16 for some
reason.
My primary motivation is to get rid of the last sentence in the
documentation which suggest that typical keys have 1024 bits (instead
updating it to the now default 2048).
I *assume* that keys less than the 2048 bits (say 512) are used for
education purposes.
The 512 bits as the minimum have been suggested by Bernd Edlinger.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4547)
In 20-cert-select.conf there is a TLSv1.1 specific test which we should
skip if TLSv1.1. is disabled.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4890)
The tests in 25-cipher.conf all use TLSv1.2 ciphersuites so we shouldn't
run it if we don't have TLSv1.2
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4889)
s_client -status is not available in this configuration.
While here, remove an outdated TODO(TLS1.3) comment.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4873)
make_dummy_resp() uses OCSP types, and get_cert_and_key() is unused
once make_dummy_resp() is compiled out, so neither can be included
in the build when OCSP is disabled and strict warnings are active.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4873)
There's no reason to wrap this call in TEST_true() if we're not
checking the return value of TEST_true() -- all of the surrounding
similar calls do not have the macro wrapping them.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4873)
Avoid memory leaks in error paths, and correctly apply
parentheses to function calls in a long if-chain.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4873)
fix indentation, remove printf from afalgtest.c
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4717)
Test reading/writing to an SSL object after a fatal error has been
detected. This CVE only affected 1.0.2, but we should add it to other
branches for completeness.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
An error reason code has changed for one of the boring tests, so
ossl_config.json needed an update to take account of it.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)
IFF the client has ChaCha first, and server cipher priority is used,
and the new SSL_OP_PRIORITIZE_CHACHA_FOR_MOBILE option is used,
then reprioritize ChaCha above everything else. This way, A matching
ChaCha cipher will be selected if there is a match. If no ChaCha ciphers
match, then the other ciphers are used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4436)
Commit 30bea14be6 converted bntest.c to the new TEST framework.
Unfortunately a missing "goto err" means that the lshift tests skip
the actual bit that tests them. Replacing the "goto err" reveals that
the conversion also broke the tests. This adds back the missing "goto err"
and fixes the tests.
Fixes#4808
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4809)
Switch to make it return an uint32_t instead of the various different
types it returns now.
Fixes: #3125
Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #4757
Fixes#4740
The MSYS2 run-time convert arguments that look like paths when
executing a program unless that application is linked with the MSYS
run-time. The exact conversion rules are listed here:
http://www.mingw.org/wiki/Posix_path_conversion
With the built-in configurations (all having names starting with
"mingw"), the openssl application is not linked with the MSYS2
run-time, and therefore, it will receive possibly converted arguments
from the process that executes it. This conversion is fine for normal
path arguments, but it happens that some arguments to the openssl
application get converted when they shouldn't. In one case, it's
arguments like '-passin file:something', and in another, it's a file:
URI (what typically happens is that URIs without an authority
component get converted, 'cause the conversion mechanism doesn't
recognise them as URIs).
To avoid conversion where we don't want it, we simply assign
MSYS2_ARG_CONV_EXCL a pattern to avoid specific conversions. As a
precaution, we only do this where we obviously need it.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4765)
SNI needs to be consistent before we accept early_data. However a
server may choose to not acknowledge SNI. In that case we have to
expect that a client may send it anyway. We change the consistency
checks so that not acknowledging is treated more a like a "wild card",
accepting any SNI as being consistent.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4738)
* Introduce RSA_generate_multi_prime_key to generate multi-prime
RSA private key. As well as the following functions:
RSA_get_multi_prime_extra_count
RSA_get0_multi_prime_factors
RSA_get0_multi_prime_crt_params
RSA_set0_multi_prime_params
RSA_get_version
* Support EVP operations for multi-prime RSA
* Support ASN.1 operations for multi-prime RSA
* Support multi-prime check in RSA_check_key_ex
* Support multi-prime RSA in apps/genrsa and apps/speed
* Support multi-prime RSA manipulation functions
* Test cases and documentation are added
* CHANGES is updated
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4241)
EVP_PKEY_public_check() and EVP_PKEY_param_check()
Doc and test cases are added
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4647)
..\test\asn1_internal_test.c(96): warning C4113: 'int (__cdecl *)()'
differs in parameter lists from 'int (__cdecl *)(void)'
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4744)
It's argued that /WX allows to keep better focus on new code, which
motivates its comeback...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)
Some of the OCSP APIs (such as the recently added OCSP_resp_get0_signer)
do not really merit inclusion in the ocsp(1) utility, but we should still
have unit tests for them.
For now, only test OCSP_resp_get0_signer(), but it should be easy to
add more tests in the future.
Provide an X509 cert and private key in the test's data directory
to use for signing responses, since constructing those on the fly
is more effort than is needed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4573)
Around 138 distinct errors found and fixed; thanks!
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)
SM3 is a secure hash function which is part of the Chinese
"Commercial Cryptography" suite of algorithms which use is
required for certain commercial applications in China.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4616)
A block of six TEST_int_xy() macro definitions was duplicated.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4624)
The check should reject kernel versions < 4.1.0, not <= 4.1.0.
The issue was spotted on OpenSUSE 42.1 Leap, since its linux/version.h
header advertises 4.1.0.
CLA: trivial
Fixes: 7f458a48 ("ALG: Add AFALG engine")
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4617)
This would cut out some distracting noise in the test output
if we ended up hitting these error cases.
Reported by Coverity.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4602)
Thanks to David Benjamin for suggesting the fix needed by this fix.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4607)
Reseeding is handled very differently by the classic RAND_METHOD API
and the new RAND_DRBG api. These differences led to some problems when
the new RAND_DRBG was made the default OpenSSL RNG. In particular,
RAND_add() did not work as expected anymore. These issues are discussed
on the thread '[openssl-dev] Plea for a new public OpenSSL RNG API'
and in Pull Request #4328. This commit fixes the mentioned issues,
introducing the following changes:
- Replace the fixed size RAND_BYTES_BUFFER by a new RAND_POOL API which
facilitates collecting entropy by the get_entropy() callback.
- Don't use RAND_poll()/RAND_add() for collecting entropy from the
get_entropy() callback anymore. Instead, replace RAND_poll() by
RAND_POOL_acquire_entropy().
- Add a new function rand_drbg_restart() which tries to get the DRBG
in an instantiated state by all means, regardless of the current
state (uninstantiated, error, ...) the DRBG is in. If the caller
provides entropy or additional input, it will be used for reseeding.
- Restore the original documented behaviour of RAND_add() and RAND_poll()
(namely to reseed the DRBG immediately) by a new implementation based
on rand_drbg_restart().
- Add automatic error recovery from temporary failures of the entropy
source to RAND_DRBG_generate() using the rand_drbg_restart() function.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4328)
Previously if a client received an HRR then we would do version negotiation
immediately - because we know we are going to get TLSv1.3. However this
causes a problem when we emit the 2nd ClientHello because we start changing
a whole load of stuff to ommit things that aren't relevant for < TLSv1.3.
The spec requires that the 2nd ClientHello is the same except for changes
required from the HRR. Therefore the simplest thing to do is to defer the
version negotiation until we receive the ServerHello.
Fixes#4292
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4527)
Test for the bug where early_data is not accepted by the server when it
does not have an SNI callback set up, but the client sent a servername in
the initial ClientHello establishing the session.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4519)
test/bad_dtls_test.c: In function 'validate_client_hello':
test/bad_dtls_test.c:128:33: error: 'u' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (!PACKET_get_1(&pkt, &u) || u != SSL3_RT_HANDSHAKE)
^
Apparently -O1 does not perform sufficient optimization to ascertain
that PACKET_get_1 will always initialize u if it returns true.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4518)
When an SSL's context is swtiched from a ticket-enabled context to
a ticket-disabled context in the servername callback, no session-id
is generated, so the session can't be resumed.
If a servername callback changes the SSL_OP_NO_TICKET option, check
to see if it's changed to disable, and whether a session ticket is
expected (i.e. the client indicated ticket support and the SSL had
tickets enabled at the time), and whether we already have a previous
session (i.e. s->hit is set).
In this case, clear the ticket-expected flag, remove any ticket data
and generate a session-id in the session.
If the SSL hit (resumed) and switched to a ticket-disabled context,
assume that the resumption was via session-id, and don't bother to
update the session.
Before this fix, the updated unit-tests in 06-sni-ticket.conf would
fail test #4 (server1 = SNI, server2 = no SNI).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/1529)
This allows the caller to guarantee that there is sufficient space for a
number of insertions without reallocation.
The expansion ratio when reallocating the array is reduced to 1.5 rather than 2.
Change bounds testing to use a single size rather than both INT_MAX and
SIZE_MAX. This simplifies some of the tests.
Switch the stack pointers to data from char * to void *
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4386)
The pub_key field for DH isn't actually used in DH_compute_key at all.
(Note the peer public key is passed in as as BIGNUM.) It's mostly there
so the caller may extract it from DH_generate_key. It doesn't
particularly need to be present if filling in a DH from external
parameters.
The check in DH_set0_key conflicts with adding OpenSSL 1.1.0 to Node.
Their public API is a thin wrapper over the old OpenSSL one:
https://nodejs.org/api/crypto.html#crypto_class_diffiehellman
They have separate setPrivateKey and setPublicKey methods, so the public
key may be set last or not at all. In 1.0.2, either worked fine since
operations on DH objects generally didn't use the public key. (Like
with OpenSSL, Node's setPublicKey method is also largely a no-op, but so
it goes.) In 1.1.0, DH_set0_key prevents create a private-key-only DH
object.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4384)
This guards against the name constraints check consuming large amounts
of CPU time when certificates in the presented chain contain an
excessive number of names (specifically subject email names or subject
alternative DNS names) and/or name constraints.
Name constraints checking compares the names presented in a certificate
against the name constraints included in a certificate higher up in the
chain using two nested for loops.
Move the name constraints check so that it happens after signature
verification so peers cannot exploit this using a chain with invalid
signatures. Also impose a hard limit on the number of name constraints
check loop iterations to further mitigate the issue.
Thanks to NCC for finding this issue. Fix written by Martin Kreichgauer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4393)
A new method is added to EVP_PKEY_METH as:
int (*check) (EVP_PKEY_CTX *ctx);
and to EVP_PKEY_ASN1_METHOD as:
int (*pkey_check) (EVP_PKEY_CTX *ctx);
This is used to check the validity of a specific key.
The order of calls is:
EVP_PKEY_check -> pmeth.check -> ameth.pkey_check.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4337)
It is otherwise unclear what all the magic numbers mean.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4349)
"Early callback" is a little ambiguous now that early data exists.
Perhaps "ClientHello callback"?
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4349)
The extensions not sent when TLS 1.2 is not used caused the message
length to be 109, which is less than the 127 threshold needed
to activate the F5 workaround. Add another 20 bytes of dummy ALPN
data do push it over the threshold.
Also, fix the definition of the (unused) local macro indicating
the threshold.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4346)
clienthellotest tries to fill out the size of the ClientHello by adding
extra ciphersuites in order to test the padding extension. This is
unreliable because they are very dependent on configuration options. If we
add too much data the test will fail! We were already also adding some dummy
ALPN protocols to pad out the size, and it turns out that this is sufficient
just in itself, so drop the extra ciphersuites.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4331)
Ironically enough not all installations get Module::Load::Conditional
installed by default... [It's a bit half-hearted, because such
installations are likely to lack more stuffi that is needed, but
nevertheless, it proved to be helpful.]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4323)
If the server_name extension is long enough to require two bytes to
hold the length of either field, the test suite would not decode
the length properly. Using the PACKET_ APIs would have avoided this,
but it was desired to avoid using private APIs in this part of the
test suite, to keep ourselves honest.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4318)
The include search path was not picking up files in the root of
the tree.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4316)
Move struct timeval includes into e_os.h (where the Windows ones were).
Enaure that the include is guarded canonically.
Refer #4271
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4312)
If there is no SNI in the session then s_client no longer sends the SNI
extension. Update the tests to take account of that
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3926)
cryptilib.h is the second.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
Removed e_os.h from all bar three headers (apps/apps.h crypto/bio/bio_lcl.h and
ssl/ssl_locl.h).
Added e_os.h into the files that need it now.
Directly reference internal/nelem.h when required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
Unlike the NIST DRBG standard, entropy counts are in bits and
buffer lengths are in bytes. This has lead to some confusion and
errors in the past, see my comment on PR 3789.
To clarify the destinction between entropy counts and buffer lengths,
a 'len' suffix has been added to all member names of RAND_DRBG which
represent buffer lengths:
- {min,max}_{entropy,adin,nonce,pers}
+ {min,max}_{entropy,adin,nonce,pers}len
This change makes naming also more consistent, as can be seen in the
diffs, for example:
- else if (adinlen > drbg->max_adin) {
+ else if (adinlen > drbg->max_adinlen) {
Also replaced all 'ent's by 'entropy's, following a suggestion of Paul Dale.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4266)
A condition was removed by commit 1053a6e2281d; presumably it was an
unintended change. Restore the previous behavior so the get_session_cb
won't be called with zero-length session ID.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4236)
range of ctype functions.
Revert "Don't try to compare the ctype functions on values > 127"
This reverts commit 6ac589081b.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4225)
The C standard defines EOF as:
... an integer constant expression, with type int and a negative value...
This means a conforming implemenetation could define this as a one of the
printable characters. This won't be a problem for ASCII.
A specific test case has been added for EOF.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4240)
Remove GETPID_IS_MEANINGLESS and osslargused.
Move socket-related things to new file internal/sockets.h; this is now
only needed by four(!!!) files. Compiles should be a bit faster.
Remove USE_SOCKETS ifdef's
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4209)
Our internal replacement functions return 0 for those values.
However, depending on locale, the C RTL functions may return 1.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4219)
Add -rand_serial to CA command and "serial_rand" config option.
Up RAND_BITS to 159, and comment why: now confirms to CABForum
guidelines (Ballot 164) as well as IETF RFC 5280 (PKIX).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4185)
return true for characters > 127. I.e. they are allowing extended ASCII
characters through which then cause problems. E.g. marking superscript '2' as
a number then causes the common (ch - '0') conversion to number to fail
miserably. Likewise letters with diacritical marks can also cause problems.
If a non-ASCII character set is being used (currently only EBCDIC), it is
adjusted for.
The implementation uses a single table with a bit for each of the defined
classes. These functions accept an int argument and fail for
values out of range or for characters outside of the ASCII set. They will
work for both signed and unsigned character inputs.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4102)
Cast arguments to the various ctype functions to unsigned char to match their
documentation.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4203)
PKEY_CTX setters tests were previously present for HKDF and scrypt; this
patch also adds tests for the third currently supported KDF, TLS1-PRF.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4196)
Force non-empty padding extension.
When enabled, force the padding extension to be at least 1 byte long.
WebSphere application server cannot handle having an empty
extension (e.g. EMS/EtM) as the last extension in a client hello.
This moves the SigAlgs extension last for TLSv1.2 to avoid this
issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3921)
Apart from ssltest_old.c, the test suite relied on e_os.h for the
OSSL_NELEM macro and nothing else.
The ssltest_old.c also requires EXIT and some socket macros.
Create a new header to define the OSSL_NELEM macro and use that instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4186)
Although this piece of code will not be compiled at current stage, but
there seems a plan to re-open the 'no-rsa' option in the future so this
should be fixed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4161)
Instead of having perl modules under test/testlib, util and util/perl,
consolidate them all to be inside util/perl.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4069)
Fix warning and don't use binary field certificate for ECDH CMS
key only test.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4134)
When we are using the internal cache we have to make a copy of the
session before removing it from the parent context's cache, since
we want our copy to still be resumable. However, SSL_CTX_remove_session()
just detaches the session from the SSL_CTX; it does not free the session.
So, we must call SSL_SESSION_free() ourselves before overwriting the
variable that we dup'd from.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4126)
Building without the scrypt KDF is now possible, the OPENSSL_NO_SCRYPT
define is honored in code. Previous this lead to undefined references.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4116)
Added the pkey_meth_kdf_test tests which test the PKEY_METHOD macros (at
the moment, of HKDF and scrypt).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4026)
Add an interface that allows accessing the scrypt KDF as a PKEY_METHOD.
This fixes#4021 (at least for the scrypt portion of the issue).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4026)
reference not by value. This allows an error return from the setup function.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4083)
Add missing ASN1_TIME functions
Do some cleanup of the ASN1_TIME code.
Add ASN1_TIME_normalize() to normalize ASN1_TIME structures.
Add ASN1_TIME_compare() to compare two ASN1_TIME structures.
Add ASN1_TIME_cmp_time_t() to compare an ASN1_TIME to time_t
(generic version of ASN1_UTCTIME_cmp_time_t()).
Replace '0' .. '9' compares with isdigit()
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2753)
Change the fixture types to pointers to structures that are heap allocated in the tests that use SETUP_TEST_FIXTURE. This will permit error returns from the setup function and allow for future running tests in parallel.
Also removed a call of `exit(2)` which allows the remaining tests to run if one fails to initialise.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4071)
If RAND_add wraps around, XOR with existing. Add test to drbgtest that
does the wrap-around.
Re-order seeding and stop after first success.
Add RAND_poll_ex()
Use the DF and therefore lower RANDOMNESS_NEEDED. Also, for child DRBG's,
mix in the address as the personalization bits.
Centralize the entropy callbacks, from drbg_lib to rand_lib.
(Conceptually, entropy is part of the enclosing application.)
Thanks to Dr. Matthias St Pierre for the suggestion.
Various code cleanups:
-Make state an enum; inline RANDerr calls.
-Add RAND_POLL_RETRIES (thanks Pauli for the idea)
-Remove most RAND_seed calls from rest of library
-Rename DRBG_CTX to RAND_DRBG, etc.
-Move some code from drbg_lib to drbg_rand; drbg_lib is now only the
implementation of NIST DRBG.
-Remove blocklength
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4019)
Removing the use of SETUP_TEST_FIXTURE reduces complxity in those tests that
used it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4066)
Simplify the only test that uses this macro so it doesn't need it anymore.
Clean up the formatting a little.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4034)
In TLSv1.3 we can resume, but still get a new session. This adds a test to
make sure that is happening.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4068)
Add functions to enumerate public key methods. Add test to ensure table
is in the correct order.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4015)
