Odd-length lists should be rejected everywhere upon parsing. Nevertheless,
be extra careful and add guards against off-by-one reads.
Also, drive-by replace inexplicable double-negation with an explicit comparison.
Reviewed-by: Matt Caswell <matt@openssl.org>
The Supported Elliptic Curves extension contains a vector of NamedCurves
of 2 bytes each, so the total length must be even. Accepting odd-length
lists was observed to lead to a non-exploitable one-byte out-of-bounds
read in the latest development branches (1.0.2 and master). Released
versions of OpenSSL are not affected.
Thanks to Felix Groebert of the Google Security Team for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 33d5ba8629)
and UDP header) when setting an mtu. This constant is not always correct (e.g.
if using IPv6). Use the new DTLS_CTRL functions instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 464ce92026)
we will support then dtls1_do_write can go into an infinite loop. This commit
fixes that.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit d3d9eef316)
at least the minimum or it will fail.
There were some instances in dtls1_query_mtu where the final mtu can end up
being less than the minimum, i.e. where the user has set an mtu manually. This
shouldn't be allowed. Also remove dtls1_guess_mtu that, despite having
logic for guessing an mtu, was actually only ever used to work out the minimum
mtu to use.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 1620a2e49c)
and instead use the value provided by the underlying BIO. Also provide some
new DTLS_CTRLs so that the library user can set the mtu without needing to
know this constant. These new DTLS_CTRLs provide the capability to set the
link level mtu to be used (i.e. including this IP/UDP overhead). The previous
DTLS_CTRLs required the library user to subtract this overhead first.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 59669b6abf)
Conflicts:
ssl/d1_both.c
used with no explanation. Some of this was introduced as part of RT#1929. The
value 28 is the length of the IP header (20 bytes) plus the UDP header (8
bytes). However use of this constant is incorrect because there may be
instances where a different value is needed, e.g. an IPv4 header is 20 bytes
but an IPv6 header is 40. Similarly you may not be using UDP (e.g. SCTP).
This commit introduces a new BIO_CTRL that provides the value to be used for
this mtu "overhead". It will be used by subsequent commits.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 0d3ae34df5)
mtu that we have received is not less than the minimum. If its less it uses the
minimum instead. The second call to query the mtu does not do that, but
instead uses whatever comes back. We have seen an instance in RT#3592 where we
have got an unreasonably small mtu come back. This commit makes both query
checks consistent.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 6abb0d1f8e)
automatically updated, and we should use the one provided instead.
Unfortunately there are a couple of locations where this is not respected.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 001235778a)
RT#3592 provides an instance where the OPENSSL_assert that this commit
replaces can be hit. I was able to recreate this issue by forcing the
underlying BIO to misbehave and come back with very small mtu values. This
happens the second time around the while loop after we have detected that the
MTU has been exceeded following the call to dtls1_write_bytes.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit cf75017bfd)
Previously, state variant was not advanced, which resulted in state
being stuck in the st1 variant (usually "_A").
This broke certificate callback retry logic when accepting connections
that were using SSLv2 ClientHello (hence reusing the message), because
their state never advanced to SSL3_ST_SR_CLNT_HELLO_C variant required
for the retry code path.
Reported by Yichun Zhang (agentzh).
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The current documentation contains a bunch of spelling and grammar mistakes. I also
found it hard to understand some paragraphs, so here is my attempt to improve its
readability.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 03b637a730)
Workaround for NetWare CodeWarrior compiler which doesn't properly lookup
includes when in same directory as the C file which includes it.
PR#3569
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 333fad9f2d)
When using the -xcert option to test certificate validity print out
if we pass Suite B compliance. We print out "not tested" if we aren't
in Suite B mode.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 7d4cdededc)
the session's version (server).
See also BoringSSL's commit bdf5e72f50e25f0e45e825c156168766d8442dde.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 9e189b9dc1)
ECDH_compute_key is silently ignored and the KDF is run on duff data
Thanks to github user tomykaira for the suggested fix.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 8d02bebddf)
once the ChangeCipherSpec message is received. Previously, the server would
set the flag once at SSL3_ST_SR_CERT_VRFY and again at SSL3_ST_SR_FINISHED.
This would allow a second CCS to arrive and would corrupt the server state.
(Because the first CCS would latch the correct keys and subsequent CCS
messages would have to be encrypted, a MitM attacker cannot exploit this,
though.)
Thanks to Joeri de Ruiter for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit e94a6c0ede)
The server must send a NewSessionTicket message if it advertised one
in the ServerHello, so make a missing ticket message an alert
in the client.
An equivalent change was independently made in BoringSSL, see commit
6444287806d801b9a45baf1f6f02a0e3a16e144c.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit de2c7504eb)
The client sends a session ID with the session ticket, and uses
the returned ID to detect resumption, so we do not need to peek
at handshake messages: s->hit tells us explicitly if we're resuming.
An equivalent change was independently made in BoringSSL, see commit
407886f589cf2dbaed82db0a44173036c3bc3317.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 980bc1ec61)
Conflicts:
ssl/s3_clnt.c
The same change was independently made in BoringSSL, see commit
9eaeef81fa2d4fd6246dc02b6203fa936a5eaf67
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 7b3ba508af)
This ensures that it's zeroed even if the SSL object is reused
(as in ssltest.c). It also ensures that it applies to DTLS, too.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit a06cd5d056)
When no-ssl3 is set only make SSLv3 disabled by default. Retain -ssl3
options for s_client/s_server/ssltest.
When no-ssl3-method is set SSLv3_*method() is removed and all -ssl3
options.
We should document this somewhere, e.g. wiki, FAQ or manual page.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 3881d8106d)
If no keyfile has been specified use the certificate file instead.
Fix typo: we need to check the chain is not NULL, not the chain file.
Reviewed-by: Matt Caswell <matt@openssl.org>
The supported signature algorithms extension needs to be processed before
the certificate to use is decided and before a cipher is selected (as the
set of shared signature algorithms supported may impact the choice).
Reviewed-by: Matt Caswell <matt@openssl.org>
