Adds a new function BIO_ADDR_clear to reset a BIO_ADDR back to an
unitialised state, and to set the family to AF_UNSPEC.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Because different platforms have different levels of support for IPv6,
different kinds of sockaddr variants, and some have getaddrinfo et al
while others don't, we could end up with a mess if ifdefs, duplicate
code and other maintainance nightmares.
Instead, we're introducing wrappers around the common form for socket
communication:
BIO_ADDR, closely related to struct sockaddr and some of its variants.
BIO_ADDRINFO, closely related to struct addrinfo.
With that comes support routines, both convenient creators and
accessors, plus a few utility functions:
BIO_parse_hostserv, takes a string of the form host:service and
splits it into host and service. It checks for * in both parts, and
converts any [ipv6-address] syntax to ust the IPv6 address.
BIO_lookup, looks up information on a host.
All routines handle IPv4 (AF_INET) and IPv6 (AF_INET6) addresses, and
there is support for local sockets (AF_UNIX) as well.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Add new function BN_bn2binpad() which checks the length of the output
buffer and pads the result with zeroes if necessary.
New functions BN_bn2lebinpad() and BN_lebin2bn() which use little endian
format.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This includes basic constraints, key usages, issuer EKUs and auxiliary
trust OIDs (given a trust suitably related to the intended purpose).
Added tests and updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
New functions to return internal pointer for order and cofactor. This
avoids the need to allocate a new BIGNUM which to copy the value to.
Simplify code to use new functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add CRYPTO_EX_DATA add EndC_KEY_[gs]et_method, From Roumen Petrov.
Had to add various exdata calls to init/copy/free the exdata.
Had to remove const from some EC functions because exdata isn't
const-correct. :(
Also remove EC_EXTRA_DATA and use a union to hold the possible
pre-computed values and an enum to tell which value is in the
union. (Rich Salz)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Make CRYPTO_mem_leaks() and CRYPTO_mem_leaks_fp() return a status value.
Update documentation. Don't abort() if there are leaks.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Provide backwards-compatiblity for functions, macros and include
files if OPENSSL_API_COMPAT is either not defined or defined less
than the version number of the release in which the feature was
deprecated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
(Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Also tweak some of the code in demos/bio, to enable interactive
testing of BIO_s_accept's use of SSL_dup. Changed the sconnect
client to authenticate the server, which now exercises the new
SSL_set1_host() function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Remove RSA_FLAG_SIGN_VER: this was origininally used to retain binary
compatibility after RSA_METHOD was extended to include rsa_sign and
rsa_verify fields. It is no longer needed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove sign/verify and required_pkey_type fields of EVP_MD: these are a
legacy from when digests were linked to public key types. All signing is
now handled by the corresponding EVP_PKEY_METHOD.
Only allow supported digest types in RSA EVP_PKEY_METHOD: other algorithms
already block unsupported types.
Remove now obsolete EVP_dss1() and EVP_ecdsa().
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add CRYPTO_free_ex_index (for shared libraries)
Unify and complete the documentation for all "ex_data" API's and objects.
Replace xxx_get_ex_new_index functions with a macro.
Added an exdata test.
Renamed the ex_data internal datatypes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Following on from the previous commit this adds some documentation for the
BN_with_flags function which is easy to misuse.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
In theory the pthreads approach for Thread Local Storage should be more
portable.
This also changes some APIs in order to accommodate this change. In
particular ASYNC_init_pool is renamed ASYNC_init_thread and
ASYNC_free_pool is renamed ASYNC_cleanup_thread. Also introduced ASYNC_init
and ASYNC_cleanup.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are potential deadlock situations that can occur if code executing
within the context of a job aquires a lock, and then pauses the job. This
adds an ability to temporarily block pauses from occuring whilst performing
work and holding a lock.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Clarify that you must only call this after all async jobs have
completed - otherwise you could get memory leaks.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add some clarifications to the async documentation. Also changed
ASYNC_pause_job() so that it returns success if you are not within the
context of a job. This is so that engines can be used either asynchronously
or synchronously and can treat an error from ASYNC_pause_job() as a real
error.
Reviewed-by: Rich Salz <rsalz@openssl.org>
EVP_SignInit_ex was missing from the NAME section of its man page so
typing "man EVP_SignInit_ex" failed to load the page.
Reviewed-by: Stephen Henson <steve@openssl.org>
If something was "present in all versions" of SSLeay, or if it was
added to a version of SSLeay (and therefore predates OpenSSL),
remove mention of it. Documentation history now starts with OpenSSL.
Remove mention of all history before OpenSSL 0.9.8, inclusive.
Remove all AUTHOR sections.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Previous language was unclear. New language isn't pretty but I believe
it is more accurate.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There are a number of engines in the OpenSSL source code which are now
obsolete. The following engines have been removed: 4758cca, aep, atalla,
cswift, nuron, sureware.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In some environments, such as firmware, the current system time is entirely
meaningless. Provide a clean mechanism to suppress the checks against it.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
If the seed value for dsa key generation is too short (< qsize),
return an error. Also update the documentation.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Make all mention of digest algorithm use "any supported algorithm"
RT2071, some new manpages from Victor B. Wagner <vitus@cryptocom.ru>:
X509_LOOKUP_hash_dir.pod
X509_check_ca.pod
X509_check_issued.pod
RT 1600:
Remove references to non-existant objects(3)
Add RETURN VALUES to BIO_do_accept page.
RT1818:
RSA_sign Can return values other than 0 on failure.
RT3634:
Fix AES CBC aliases (Steffen Nurpmeso <sdaoden@yandex.com>)
RT3678:
Some clarifications to BIO_new_pair
(Devchandra L Meetei <dlmeetei@gmail.com>)
RT3787:
Fix some EVP_ function return values
(Laetitia Baudoin <lbaudoin@google.com>)
Reviewed-by: Tim Hudson <tjh@openssl.org>
L<foo|foo> is sub-optimal If the xref is the same as the title,
which is what we do, then you only need L<foo>. This fixes all
1457 occurrences in 349 files. Approximately. (And pod used to
need both.)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Thanks folks:
348 Benjamin Kaduk
317 Christian Brueffer
254 Erik Tews
253 Erik Tews
219 Carl Mehner
155 (ghost)
95 mancha
51 DominikNeubauer
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
The -show_chain flag to the verify command line app shows information about
the chain that has been built. This commit adds the text "untrusted" against
those certificates that have been used from the untrusted list.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The function X509_verify_cert checks the value of |ctx->chain| at the
beginning, and if it is NULL then it initialises it, along with the value
of ctx->untrusted. The normal way to use X509_verify_cert() is to first
call X509_STORE_CTX_init(); then set up various parameters etc; then call
X509_verify_cert(); then check the results; and finally call
X509_STORE_CTX_cleanup(). The initial call to X509_STORE_CTX_init() sets
|ctx->chain| to NULL. The only place in the OpenSSL codebase where
|ctx->chain| is set to anything other than a non NULL value is in
X509_verify_cert itself. Therefore the only ways that |ctx->chain| could be
non NULL on entry to X509_verify_cert is if one of the following occurs:
1) An application calls X509_verify_cert() twice without re-initialising
in between.
2) An application reaches inside the X509_STORE_CTX structure and changes
the value of |ctx->chain| directly.
With regards to the second of these, we should discount this - it should
not be supported to allow this.
With regards to the first of these, the documentation is not exactly
crystal clear, but the implication is that you must call
X509_STORE_CTX_init() before each call to X509_verify_cert(). If you fail
to do this then, at best, the results would be undefined.
Calling X509_verify_cert() with |ctx->chain| set to a non NULL value is
likely to have unexpected results, and could be dangerous. This commit
changes the behaviour of X509_verify_cert() so that it causes an error if
|ctx->chain| is anything other than NULL (because this indicates that we
have not been initialised properly). It also clarifies the associated
documentation. This is a follow up commit to CVE-2015-1793.
Reviewed-by: Stephen Henson <steve@openssl.org>
Add secure heap for storage of private keys (when possible).
Add BIO_s_secmem(), CBIGNUM, etc.
Add BIO_CTX_secure_new so all BIGNUM's in the context are secure.
Contributed by Akamai Technologies under the Corporate CLA.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If BN_rand is called with |bits| set to 1 and |top| set to 1 then a 1 byte
buffer overflow can occur. There are no such instances within the OpenSSL at
the moment.
Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke, Filip Palian for
discovering and reporting this issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The functions BN_rshift and BN_lshift shift their arguments to the right or
left by a specified number of bits. Unpredicatable results (including
crashes) can occur if a negative number is supplied for the shift value.
Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and Filip Palian
for discovering and reporting this issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Rewrite and tidy ASN1_INTEGER and ASN1_ENUMERATED handling.
Remove code duplication.
New functions to convert between int64_t and ASN.1 types without the
quirks of the old long conversion functions.
Add documentation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This gets BN_.*free:
BN_BLINDING_free BN_CTX_free BN_FLG_FREE BN_GENCB_free
BN_MONT_CTX_free BN_RECP_CTX_free BN_clear_free BN_free BUF_MEM_free
Also fix a call to DSA_SIG_free to ccgost engine and remove some #ifdef'd
dead code in engines/e_ubsec.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't check for NULL before calling a free routine. This gets X509_.*free:
x509_name_ex_free X509_policy_tree_free X509_VERIFY_PARAM_free
X509_STORE_free X509_STORE_CTX_free X509_PKEY_free
X509_OBJECT_free_contents X509_LOOKUP_free X509_INFO_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add new functions ASN1_TYPE_pack_sequence and ASN1_TYPE_unpack_sequence:
these encode and decode ASN.1 SEQUENCE using an ASN1_TYPE structure.
Update ordinals.
Reviewed-by: Rich Salz <rsalz@openssl.org>
EVP_.*free; this gets:
EVP_CIPHER_CTX_free EVP_PKEY_CTX_free EVP_PKEY_asn1_free
EVP_PKEY_asn1_set_free EVP_PKEY_free EVP_PKEY_free_it
EVP_PKEY_meth_free; and also EVP_CIPHER_CTX_cleanup
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The justification for RAND_pseudo_bytes is somewhat dubious, and the reality
is that it is frequently being misused. RAND_bytes and RAND_pseudo_bytes in
the default implementation both end up calling ssleay_rand_bytes. Both may
return -1 in an error condition. If there is insufficient entropy then
both will return 0, but RAND_bytes will additionally add an error to the
error queue. They both return 1 on success.
Therefore the fundamental difference between the two is that one will add an
error to the error queue with insufficient entory whilst the other will not.
Frequently there are constructions of this form:
if(RAND_pseudo_bytes(...) <= 1)
goto err;
In the above form insufficient entropy is treated as an error anyway, so
RAND_bytes is probably the better form to use.
This form is also seen:
if(!RAND_pseudo_bytes(...))
goto err;
This is technically not correct at all since a -1 return value is
incorrectly handled - but this form will also treat insufficient entropy as
an error.
Within libssl it is required that you have correctly seeded your entropy
pool and so there seems little benefit in using RAND_pseudo_bytes.
Similarly in libcrypto many operations also require a correctly seeded
entropy pool and so in most interesting cases you would be better off
using RAND_bytes anyway. There is a significant risk of RAND_pseudo_bytes
being incorrectly used in scenarios where security can be compromised by
insufficient entropy.
If you are not using the default implementation, then most engines use the
same function to implement RAND_bytes and RAND_pseudo_bytes in any case.
Given its misuse, limited benefit, and potential to compromise security,
RAND_pseudo_bytes has been deprecated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets DH_free, DSA_free, RSA_free
Reviewed-by: Matt Caswell <matt@openssl.org>
Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets ASN1_OBJECT_free and ASN1_STRING_free.
Reviewed-by: Matt Caswell <matt@openssl.org>
Updates to include SHA224, SHA256, SHA384 and SHA512. In particular note
the restriction on setting md to NULL with regards to thread safety.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Specifically, an ASN.1 NumericString in the certificate CN will fail UTF-8 conversion
and result in a negative return value, which the "x509 -checkhost" command-line option
incorrectly interpreted as success.
Also update X509_check_host docs to reflect reality.
Thanks to Sean Burford (Google) for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove support for SHA0 and DSS0 (they were broken), and remove
the ability to attempt to build without SHA (it didn't work).
For simplicity, remove the option of not building various SHA algorithms;
you could argue that SHA_224/256/384/512 should be kept, since they're
like crypto algorithms, but I decided to go the other way.
So these options are gone:
GENUINE_DSA OPENSSL_NO_SHA0
OPENSSL_NO_SHA OPENSSL_NO_SHA1
OPENSSL_NO_SHA224 OPENSSL_NO_SHA256
OPENSSL_NO_SHA384 OPENSSL_NO_SHA512
Reviewed-by: Richard Levitte <levitte@openssl.org>
Per discussion: should not exit. Should not print to stderr.
Errors are ignored. Updated doc to reflect that, and the fact
that this function is to be avoided.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Show only the #define, not the values, in BIO_f_buffer. Data
abstraction and we can remove a "see also" entry.
Remove internal forward reference to NOTES in EVP_EncryptInit; just
say "see below" as we do in the other pages.
Add missing (3) in pem.pod so the L<> entry is consistent.
Fix entry to point to the "master" page, not the symlink'd one.
Reviewed-by: Matt Caswell <matt@openssl.org>
MS Server gated cryptography is obsolete and dates from the time of export
restrictions on strong encryption and is only used by ancient versions of
MSIE.
Reviewed-by: Matt Caswell <matt@openssl.org>
In EVP_EncryptInit remove duplicate mention of EVP_idea_cbc()
In EVP_PKEY_CTX_ctrl.pod remove EVP_PKEY_get_default_digest_nid
since it is documented elsewhere.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix CONF_load_modules to CONF_modules_load.
Document that it calls exit.
Advise against using it now.
Add an error print to stderr.
Reviewed-by: Matt Caswell <matt@openssl.org>
Out is the buffer which needs to contain at least inl + cipher_block_size - 1 bytes. Outl
is just an int*.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
If data is NULL, return the size needed to hold the
derived key. No other API to do this, so document
the behavior.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The original RT request included a patch. By the time
we got around to doing it, however, the callback scheme
had changed. So I wrote a new function RSA_check_key_ex()
that uses the BN_GENCB callback. But thanks very much
to Vinet Sharma <vineet.sharma@gmail.com> for the
initial implementation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
i2d_re_X509_tbs re-encodes the TBS portion of the certificate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
Andy found an additional typo "can be can be".
Now I have that silly "Que sera sera" song stuck in my head.
Reviewed-by: Andy Polyakov <appro@openssl.org>
RT1665: aes documentation.
Paul Green wrote a nice aes.pod file.
But we now encourage the EVP interface.
So I took his RT item and used it as impetus to add
the AES modes to EVP_EncryptInit.pod
I also noticed that rc4.pod has spurious references to some other
cipher pages, so I removed them.
RT2300: Clean up MD history (merged into RT1665)
Put HISTORY section only in EVP_DigestInit.pod. Also add words
to discourage use of older cipher-specific API, and remove SEE ALSO
links that point to them.
Make sure digest pages have a NOTE that says use EVP_DigestInit.
Review feedback:
More cleanup in EVP_EncryptInit.pod
Fixed SEE ALSO links in ripemd160.pod, sha.pod, mdc2.pod, blowfish.pod,
rc4.d, and des.pod. Re-order sections in des.pod for consistency
Reviewed-by: Matt Caswell <matt@openssl.org>
When d2i_ECPrivateKey reads a private key with a missing (optional) public key,
generate one automatically from the group and private key.
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
The EXAMPLE that used FILE and RC2 doesn't compile due to a
few minor errors. Tweak to use IDEA and AES-128. Remove
examples about RC2 and RC5.
Reviewed-by: Emilia Kasper <emilia@openssl.org>
In two OpenSSL manual pages, in the NAME section, the last word of the
name list is followed by a stray trailing comma. While this may seem
minor, it is worth fixing because it may confuse some makewhatis(8)
implementations.
While here, also add the missing word "size" to the one line
description in SSL_CTX_set_max_cert_list(3).
Reviewed by: Dr Stephen Henson <shenson@drh-consultancy.co.uk>
Reduces number of silly casts in OpenSSL code and likely most
applications. Consistent with (char *) for "peername" value from
X509_check_host() and X509_VERIFY_PARAM_get0_peername().
IN parameter.
Under the old docs, the only thing stated was "at most
EVP_PKEY_size(pkey) bytes will be written". It was kind of misleading
since it appears EVP_PKEY_size(pkey) WILL be written regardless of the
signature's buffer size.
A client reference identity of ".example.com" matches a server
certificate presented identity that is any sub-domain of "example.com"
(e.g. "www.sub.example.com).
With the X509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS flag, it matches
only direct child sub-domains (e.g. "www.sub.example.com").
Remove reference to ERR_TXT_MALLOCED in the error library as that is
only used internally. Indicate that returned error data must not be
freed.
(cherry picked from commit f2d678e6e8)
This fixes problems in POD list formatting: extra or missing =back
sequences.
doc/ssl/SSL_CTX_set1_curves.pod around line 90: =back without =over
doc/ssl/SSL_CTX_set1_verify_cert_store.pod around line 73: =back without =over
doc/ssl/SSL_CTX_add1_chain_cert.pod around line 82: =back without =over
doc/crypto/evp.pod around line 40: '=item' outside of any '=over'
crypto/des/des.pod around line 184: You forgot a '=back' before '=head1'
PR#3147
PR#3071
The primary changes made are:
- Updates to the "NAME" section of many pages to correctly reflect the
functions defined on those pages. This section is automatically parsed
by the util/extract-names.pl script, so if it is not correct then
running "man" will not correctly locate the right manual pages.
- Updates to take account of where functions are now deprecated
- Full documentation of the ec sub-library
- A number of other typo corrections and other minor tweaks
Add CMS_RecipientInfo_encrypt: this function encrypts an existing content
encryption key to match the key in the RecipientInfo structure: this is
useful if a new recpient is added to and existing enveloped data structure.
Add documentation.
podlators 2.5.0 has switched to dying on POD syntax errors. This means
that a bunch of long-standing erroneous POD in the openssl documentation
now leads to fatal errors from pod2man, halting installation.
Unfortunately POD constraints mean that you have to sort numeric lists
in ascending order if they start with 1: you cannot do 1, 0, 2 even if
you want 1 to appear first. I've reshuffled such (alas, I wish there
were a better way but I don't know of one).
Contributed by: Florian Weimer <fweimer@redhat.com>
Fixes to X509 hostname and email address checking. Wildcard matching support.
New test program and manual page.
