There are a number of engines in the OpenSSL source code which are now
obsolete. The following engines have been removed: 4758cca, aep, atalla,
cswift, nuron, sureware.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The ossltest engine wraps the built-in implementation of aes128-cbc.
Normally in an engine the cipher_data structure is automatically allocated
by the EVP layer. However this relies on the engine specifying up front
the size of that cipher_data structure. In the case of ossltest this value
isn't available at compile time. This change makes the ossltest engine
allocate its own cipher_data structure instead of leaving it to the EVP
layer.
Reviewed-by: Andy Polyakov <appro@openssl.org>
There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: Richard Levitte <levitte@openssl.org>
This was obsolete in 2001. This is not the same as Gost94 digest.
Thanks to Dmitry Belyavsky <beldmit@gmail.com> for review and advice.
Reviewed-by: Matt Caswell <matt@openssl.org>
Use a dynamic engine for ossltest engine so that we can build it without
subsequently deploying it during install. We do not want people accidentally
using this engine.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This engine is for testing purposes only. It provides crippled crypto
implementations and therefore must not be used in any instance where
security is required.
This will be used by the forthcoming libssl test harness which will operate
as a man-in-the-middle proxy. The test harness will be able to modify
TLS packets and read their contents. By using this test engine packets are
not encrypted and MAC codes always verify.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The return value of i2d functions can be negative if an error occurs.
Therefore don't assign the return value to an unsigned type and *then*
check if it is negative.
RT#3862
Reviewed-by: Richard Levitte <levitte@openssl.org>
The update: target in engines/ didn't recurse into engines/ccgost.
The update: and depend: targets in engines/ccgost needed a fixup.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in. This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.
This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For the various string-compare routines (strcmp, strcasecmp, str.*cmp)
use "strcmp()==0" instead of "!strcmp()"
Reviewed-by: Tim Hudson <tjh@openssl.org>
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy. Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
ONEDIRS, EDIRS and WDIRS aren't used anywhere. Most probably remains
from a build system of the past, it's time they get put to rest.
Reviewed-by: Rich Salz <rsalz@openssl.org>
After the finale, the "real" final part. :) Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Don't check for NULL before calling free functions. This gets:
ERR_STATE_free
ENGINE_free
DSO_free
CMAC_CTX_free
COMP_CTX_free
CONF_free
NCONF_free NCONF_free_data _CONF_free_data
A sk_free use within OBJ_sigid_free
TS_TST_INFO_free (rest of TS_ API was okay)
Doc update for UI_free (all uses were fine)
X509V3_conf_free
X509V3_section_free
X509V3_string_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
This gets BN_.*free:
BN_BLINDING_free BN_CTX_free BN_FLG_FREE BN_GENCB_free
BN_MONT_CTX_free BN_RECP_CTX_free BN_clear_free BN_free BUF_MEM_free
Also fix a call to DSA_SIG_free to ccgost engine and remove some #ifdef'd
dead code in engines/e_ubsec.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add OPENSSL_clear_free which merges cleanse and free.
(Names was picked to be similar to BN_clear_free, etc.)
Removed OPENSSL_freeFunc macro.
Fixed the small simple ones that are left:
CRYPTO_free CRYPTO_free_locked OPENSSL_free_locked
Reviewed-by: Richard Levitte <levitte@openssl.org>
With no more symlinks, there's no need for those variables, or the links
target. This also goes for all install: and uninstall: targets that do
nothing but copy $(EXHEADER) files, since that's now taken care of by the
top Makefile.
Also, removed METHTEST from test/Makefile. It looks like an old test that's
forgotten...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rather than making include/openssl/foo.h a symlink to
crypto/foo/foo.h, this change moves the file to include/openssl/foo.h
once and for all.
Likewise, move crypto/foo/footest.c to test/footest.c, instead of
symlinking it there.
Originally-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The logic with how 'ok' was calculated didn't quite convey what's "ok",
so the logic is slightly redone to make it less confusing.
Reviewed-by: Andy Polyakov <appro@openssl.org>
EVP_.*free; this gets:
EVP_CIPHER_CTX_free EVP_PKEY_CTX_free EVP_PKEY_asn1_free
EVP_PKEY_asn1_set_free EVP_PKEY_free EVP_PKEY_free_it
EVP_PKEY_meth_free; and also EVP_CIPHER_CTX_cleanup
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Filled in lots of return value checks that were missing the GOST engine, and
added appropriate error handling.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets DH_free, DSA_free, RSA_free
Reviewed-by: Matt Caswell <matt@openssl.org>
catch up with the Unix build.
A number of new tests, among others test/tocsp.com
Define INTERNAL in ssl/ssl-lib.com to allow for '#include "internal/foo.h"'
Reviewed-by: Andy Polyakov <appro@openssl.org>
When you use "-s" in the make flag, you see that engines outputs
a blank line because EDIRS isn't set. This is a debug echo that
isn't needed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove support for SHA0 and DSS0 (they were broken), and remove
the ability to attempt to build without SHA (it didn't work).
For simplicity, remove the option of not building various SHA algorithms;
you could argue that SHA_224/256/384/512 should be kept, since they're
like crypto algorithms, but I decided to go the other way.
So these options are gone:
GENUINE_DSA OPENSSL_NO_SHA0
OPENSSL_NO_SHA OPENSSL_NO_SHA1
OPENSSL_NO_SHA224 OPENSSL_NO_SHA256
OPENSSL_NO_SHA384 OPENSSL_NO_SHA512
Reviewed-by: Richard Levitte <levitte@openssl.org>
OPENSSL_NO_RIPEMD160, OPENSSL_NO_RIPEMD merged into OPENSSL_NO_RMD160
OPENSSL_NO_FP_API merged into OPENSSL_NO_STDIO
Two typo's on #endif comments fixed:
OPENSSL_NO_ECB fixed to OPENSSL_NO_OCB
OPENSSL_NO_HW_SureWare fixed to OPENSSL_NO_HW_SUREWARE
Reviewed-by: Richard Levitte <levitte@openssl.org>
This commit removes NCR, Tandem, Cray.
Regenerates TABLE.
Removes another missing BEOS fluff.
The last platform remaining on this ticket is WIN16.
Reviewed-by: Richard Levitte <levitte@openssl.org>
for dummytest if gost is compiled out, since the name of the test is not
standard (dummytest segfaults). Also the old name caused problems for git
because the executable was not in the .gitignore file
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The following #ifdef tests were all removed:
__MWERKS__
MAC_OS_pre_X
MAC_OS_GUSI_SOURCE
MAC_OS_pre_X
OPENSSL_SYS_MACINTOSH_CLASSIC
OPENSSL_SYS_MACOSX_RHAPSODY
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add a dozen more const declarations where appropriate.
These are from Justin; while adding his patch, I noticed
ASN1_BIT_STRING_check could be fixed, too.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
The call to setenv in gost2814789t.c is not portable and may
not reflect the location of the GOST ENGINE on all platforms anyway.
Instead set OPENSSL_ENGINES in test/Makefile
Reviewed-by: Geoff Thorpe <geoff@openssl.org>
Original definition depended on __LONG_MAX__ that is not guaranteed to
be present. As we don't support platforms with int narrower that 32 bits
it's appropriate to make defition inconditional.
PR: 3165
Multiple copies of the ENGINE will cause problems when it is cleaned up as
the methods are stored in static structures which will be overwritten and
freed up more than once.
Set static methods to NULL when the ENGINE is freed so it can be reloaded.
different options:
"64" The build system will choose /POINTER_SIZE=64=ARGV if
the compiler supports it, otherwise /POINTER_SIZE=64.
"64=" The build system will force /POINTER_SIZE=64.
"64=ARGV" The build system will force /POINTER_SIZE=64=ARGV.
Submitted By: Jaroslav Imrich <jaroslav.imrich@disig.sk>
The prompt_info and wrong_info parameters can be empty strings which
can produce confusing prompts. Treat empty string same as NULL.
Reviewed by: steve@openssl.org
Various GOST ciphersuite and ENGINE fixes. Including...
Allow EVP_PKEY_set_derive_peerkey() in encryption operations.
New flag when certificate verify should be omitted in client key exchange.
(with introduction of 64-bit support alloca must be declared and there
is no standard way of doing that, switching to __bultin_alloca is
considered appropriate because code explicitly targets gcc anyway).
Redo the loop so it really compiles all objects for one engine, then
links the engine (until now, it still thought every file was an engine
of its own...).
