dsa_builtin_paramgen2 expects the L parameter to be greater than N,
otherwise the generation will get stuck in an infinite loop.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7493)
Avoid a timing attack that leaks information via a side channel that
triggers when a BN is resized. Increasing the size of the BNs
prior to doing anything with them suppresses the attack.
Thanks due to Samuel Weiser for finding and locating this.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7486)
There is a side channel attack against the division used to calculate one of
the modulo inverses in the DSA algorithm. This change takes advantage of the
primality of the modulo and Fermat's little theorem to calculate the inverse
without leaking information.
Thanks to Samuel Weiser for finding and reporting this.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7487)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7121)
`RSA_free()` and friends are called in case of error from
`RSA_new_method(ENGINE *e)` (or the respective equivalent functions).
For the rest of the description I'll talk about `RSA_*`, but the same
applies for the equivalent `DSA_free()`, `DH_free()`, `EC_KEY_free()`.
If `RSA_new_method()` fails because the engine does not implement the
required method, when `RSA_free(RSA *r)` is called,
`r->meth == NULL` and a segfault happens while checking if
`r->meth->finish` is defined.
This commit fixes this issue by ensuring that `r->meth` is not NULL
before dereferencing it to check for `r->meth->finish`.
Fixes#7102 .
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7121)
FIPS 186-4 does not specify a hard requirement on DSA digest lengths,
and in any case the current check rejects the FIPS recommended digest
lengths for key sizes != 1024 bits.
Fixes: #6748
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6749)
This extends the recently added ECDSA signature blinding to blind DSA too.
This is based on side channel attacks demonstrated by Keegan Ryan (NCC
Group) for ECDSA which are likely to be able to be applied to DSA.
Normally, as in ECDSA, during signing the signer calculates:
s:= k^-1 * (m + r * priv_key) mod order
In ECDSA, the addition operation above provides a sufficient signal for a
flush+reload attack to derive the private key given sufficient signature
operations.
As a mitigation (based on a suggestion from Keegan) we add blinding to
the operation so that:
s := k^-1 * blind^-1 (blind * m + blind * r * priv_key) mod order
Since this attack is a localhost side channel only no CVE is assigned.
This commit also tweaks the previous ECDSA blinding so that blinding is
only removed at the last possible step.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6522)
There are two undocumented DSA parameter generation options available in
the genpkey command line app:
dsa_paramgen_md and dsa_paramgen_q_bits.
These can also be accessed via the EVP API but only by using
EVP_PKEY_CTX_ctrl() or EVP_PKEY_CTX_ctrl_str() directly. There are no
helper macros for these options.
dsa_paramgen_q_bits sets the length of q in bits (default 160 bits).
dsa_paramgen_md sets the digest that is used during the parameter
generation (default SHA1). In particular the output length of the digest
used must be equal to or greater than the number of bits in q because of
this code:
if (!EVP_Digest(seed, qsize, md, NULL, evpmd, NULL))
goto err;
if (!EVP_Digest(buf, qsize, buf2, NULL, evpmd, NULL))
goto err;
for (i = 0; i < qsize; i++)
md[i] ^= buf2[i];
/* step 3 */
md[0] |= 0x80;
md[qsize - 1] |= 0x01;
if (!BN_bin2bn(md, qsize, q))
goto err;
qsize here is the number of bits in q and evpmd is the digest set via
dsa_paramgen_md. md and buf2 are buffers of length SHA256_DIGEST_LENGTH.
buf2 has been filled with qsize bits of random seed data, and md is
uninitialised.
If the output size of evpmd is less than qsize then the line "md[i] ^=
buf2[i]" will be xoring an uninitialised value and the random seed data
together to form the least significant bits of q (and not using the
output of the digest at all for those bits) - which is probably not what
was intended. The same seed is then used as an input to generating p. If
the uninitialised data is actually all zeros (as seems quite likely)
then the least significant bits of q will exactly match the least
significant bits of the seed.
This problem only occurs if you use these undocumented and difficult to
find options and you set the size of q to be greater than the message
digest output size. This is for parameter generation only not key
generation. This scenario is considered highly unlikely and
therefore the security risk of this is considered negligible.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5800)
information about the length of a value used in DSA operations from
a large number of signatures.
This doesn't rate as a CVE because:
* For the non-constant time code, there are easier ways to extract
more information.
* For the constant time code, it requires a significant number of signatures
to leak a small amount of information.
Thanks to Neals Fournaise, Eliane Jaulmes and Jean-Rene Reinhard for
reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4576)
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
Names were not removed.
Some comments were updated.
Replace Andy's address with openssl.org
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4516)
Removed e_os.h from all bar three headers (apps/apps.h crypto/bio/bio_lcl.h and
ssl/ssl_locl.h).
Added e_os.h into the files that need it now.
Directly reference internal/nelem.h when required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
Add a new global DRBG for private keys used by RAND_priv_bytes.
Add BN_priv_rand() and BN_priv_rand_range() which use RAND_priv_bytes().
Change callers to use the appropriate BN_priv... function.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4076)
If RAND_add wraps around, XOR with existing. Add test to drbgtest that
does the wrap-around.
Re-order seeding and stop after first success.
Add RAND_poll_ex()
Use the DF and therefore lower RANDOMNESS_NEEDED. Also, for child DRBG's,
mix in the address as the personalization bits.
Centralize the entropy callbacks, from drbg_lib to rand_lib.
(Conceptually, entropy is part of the enclosing application.)
Thanks to Dr. Matthias St Pierre for the suggestion.
Various code cleanups:
-Make state an enum; inline RANDerr calls.
-Add RAND_POLL_RETRIES (thanks Pauli for the idea)
-Remove most RAND_seed calls from rest of library
-Rename DRBG_CTX to RAND_DRBG, etc.
-Move some code from drbg_lib to drbg_rand; drbg_lib is now only the
implementation of NIST DRBG.
-Remove blocklength
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4019)
Run perltidy on util/mkerr
Change some mkerr flags, write some doc comments
Make generated tables "const" when genearting lib-internal ones.
Add "state" file for mkerr
Renerate error tables and headers
Rationalize declaration of ERR_load_XXX_strings
Fix out-of-tree build
Add -static; sort flags/vars for options.
Also tweak code output
Moved engines/afalg to engines (from master)
Use -static flag
Standard engine #include's of errors
Don't linewrap err string tables unless necessary
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3392)
Replace all remaining uses of LONG and ZLONG with INT32 / ZINT32.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3126)
When setting the digest parameter for DSA parameter generation, the
signature MD was set instead of the parameter generation one.
Fortunately, that's also the one that was used for parameter
generation, but it ultimately meant the parameter generator MD and the
signature MD would always be the same.
Fixes github issue #2016
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2250)
Both strdup or malloc failure should raise à err.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1905)
prio openssl 1.1.0 seed_len < q was accepted and the seed argument was
then ignored. Now DSA_generate_parameters_ex() returns an error in such
a case but no error string.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1657)
We should check the last BN_CTX_get() call to ensure that it isn't NULL
before we try and use any of the allocated BIGNUMs.
Issue reported by Shi Lei.
Reviewed-by: Richard Levitte <levitte@openssl.org>
To avoid having to immediately free up r/s when setting them
don't allocate them automatically in DSA_SIG_new() and ECDSA_SIG_new().
RT#4590
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reorder arguments to follow convention.
Also allow r/s to be NULL in DSA_SIG_get0, similarly to ECDSA_SIG_get0.
This complements GH1193 which adds non-const setters.
Reviewed-by: Rich Salz <rsalz@openssl.org>
