This was originally part of SipHash_Init. However, there are cases
where there isn't any key material to initialize from when setting the
hash size, and we do allow doing so with a EVP_PKEY control. The
solution is to provide a separate hash_size setter and to use it in
the corresponding EVP_PKEY_METHOD.
Fixes#7143
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7145)
PR #3783 introduce coded to reset the server side SNI state in
SSL_do_handshake() to ensure any erroneous config time SNI changes are
cleared. Unfortunately SSL_do_handshake() can be called mid-handshake
multiple times so this is the wrong place to do this and can mean that
any SNI data is cleared later on in the handshake too.
Therefore move the code to a more appropriate place.
Fixes#7014
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7149)
Even though we already sent close_notify the server may not have recieved
it yet and could issue a CertificateRequest to us. Since we've already
sent close_notify we can't send any reasonable response so we just ignore
it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7114)
This test case is originally submitted in #6757, by Jack Lloyd. The test
case has been modified to use the a different method to set the ID when
computing the Z hash of SM2 signature.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7113)
zero-length ID is allowed, but it's not allowed to skip the ID.
Fixes: #6534
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)
Check that we use an RSA certificate if an RSA key exchange ciphersuite
is being used and we have both RSA and RSA-PSS certificates configured.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7099)
Add a test to check that we create the correct number of tickets after a
TLSv1.3 PSK.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7097)
Added NIST test cases for these two as well.
Additionally deprecate the public definiton of HMAC_MAX_MD_CBLOCK in 1.2.0.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6972)
Add one more unit test case
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/6892)
The shared libraries are now stored as members of archives, as it is usual
on AIX. To correctly address this the custom dladdr()-implementation as
well as the dlfcn_load() routine need to be able to cope with such a
construct: libname.a(libname.so).
Signed-off-by: Matthias Kraft <Matthias.Kraft@softwareag.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6872)
We recently turned on the TLSv1.3 downgrade sentinels by default.
Unfortunately we are using a very old version of the BoringSSL test
runner which uses an old draft implementation of TLSv1.3 that also
uses the downgrade sentinels by default. The two implementations do
not play well together and were causing spurious test failures. Until
such time as we update the BoringSSL test runner we disable the failing
tests:
SendFallbackSCSV
In this test the client is OpenSSL and the server is the boring test runner.
The client and server fail to negotiate TLSv1.3 because the test runner is
using an old draft TLSv1.3 version. The server does however add the
TLSv1.3->TLSv1.2 downgrade sentinel in the ServerHello random. Since we
recently turned on checking of the downgrade sentinels on the client side
this causes the connection to fail.
VersionNegotiationExtension-TLS11
In this test the test runner is the client and OpenSSL is the server. The
test modifies the supported_versions extension sent by the client to only
include TLSv1.1 (and some other spurious versions), even though the client
does actually support TLSv1.2. The server successfully selects TLSv1.1, but
adds the TLSv1.3->TLSv1.1 downgrade sentinel. This behaviour was recently
switched on by default. The test runner then checks the downgrade sentinel
and aborts the connection because it knows that it really supports TLSv1.2.
VersionNegotiationExtension-TLS1
VersionNegotiationExtension-SSL3
The same as VersionNegotiationExtension-TLS11 but for TLSv1 and SSLv3.
ConflictingVersionNegotiation
In this test the client is the test runner, and OpenSSL is the server. The
client offers TLSv1.2 in ClientHello.version, but also adds a
supported_versions extension that only offers TLSv1.1. The
supported_versions extension takes precedence and the server (correctly)
selects TLSv1.1. However it also adds the TLSv1.3->TLSv1.1 downgrade
sentinel. On the client side it knows it actually offered TLSv1.2 and so the
downgrade sentinel check fails.
[extended tests]
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7013)
This commit destroys the free list pointers which would otherwise be
present in the returned memory blocks. This in turn helps prevent
information leakage from the secure memory area.
Note: CRYPTO_secure_malloc is not guaranteed to return zeroed memory:
before the secure memory system is initialised or if it isn't implemented.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7011)
The EFD database does not state that the "ladd-2002-it-3" algorithm
assumes X1 != 0.
Consequently the current implementation, based on it, fails to compute
correctly if the affine x coordinate of the scalar multiplication input
point is 0.
We replace this implementation using the alternative algorithm based on
Eq. (9) and (10) from the same paper, which being derived from the
additive relation of (6) does not incur in this problem, but costs one
extra field multiplication.
The EFD entry for this algorithm is at
https://hyperelliptic.org/EFD/g1p/auto-shortw-xz.html#ladder-ladd-2002-it-4
and the code to implement it was generated with tooling.
Regression tests add one positive test for each named curve that has
such a point. The `SharedSecret` was generated independently from the
OpenSSL codebase with sage.
This bug was originally reported by Dmitry Belyavsky on the
openssl-users maling list:
https://mta.openssl.org/pipermail/openssl-users/2018-August/008540.html
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7000)
We already have SSL_set_post_handshake_auth(). This just adds the SSL_CTX
equivalent.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6938)
Having post handshake auth automatically switched on breaks some
applications written for TLSv1.2. This changes things so that an explicit
function call is required for a client to indicate support for
post-handshake auth.
Fixes#6933.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6938)
spurious output when checking for error conditions.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6899)
The TLSv1.4 tolerance test wasn't testing what we thought it was.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6741)
Test that a server can handle an unecrypted alert when normally the next
message is encrypted.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6887)
In 38eca7fed0 a new check for the pem_str member of the entries of the
ASN1 method table was introduced. Because the test condition was split
into two TEST_true(...) conditions, the test outputs error diagnostics
for all entries which have pem_str != NULL. This commit joins the two
test conditions into a single condition.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6888)
The CRYPTO_memcmp test isn't testing the test framework.
It would seem to better belong in the sanity tests.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6878)
Ensure that the certificate required alert actually gets sent (and doesn't
get translated into handshake failure in TLSv1.3).
Ensure that proper reason codes are given for the new TLSv1.3 alerts.
Remove an out of date macro for TLS13_AD_END_OF_EARLY_DATA. This is a left
over from an earlier TLSv1.3 draft that is no longer used.
Fixes#6804
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6809)
To start with, actually set an SNI callback (copied from bssl_shim); we
weren't actually testing much otherwise (and just happened to have been
passing due to buggy libssl behavior prior to
commit 1c4aa31d79).
Also use proper C++ code for handling C strings -- when a C API
(SSL_get_servername()) returns NULL instead of a string, special-case
that instead of blindly trying to compare NULL against a std::string,
and perform the comparsion using the std::string operators instead of
falling back to pointer comparison.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6792)
The spec says that a client MUST set legacy_version to TLSv1.2, and
requires servers to verify that it isn't SSLv3.
Fixes#6600
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6747)
The GOST ciphers are dynamically loaded via the GOST engine, so we must
be able to support that. The engine also uses DSA and CMS symbols, so we
skip the test on no-dsa or no-cms.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6730)
and catch corner cases better and earlier
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
Fix the NULL check lack in a different way that is more compatible with
non-NULL branch. Refer #6632
Also mark and pop the error stack instead of clearing all errors when something
goes awry in CONF_get_number.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6643)
The problematic case falls back to a NULL conf which returns the result
of getenv(2). If this returns NULL, everything was good. If this returns
a string an attempt to convert it to a number is made using the function
pointers from conf.
This fix uses the strtol(3) function instead, we don't have the
configuration settings and this behaves as the default would.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6632)
This also adds the ability to control this through s_server
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6469)
1. For every named curve, two "golden" keypair positive tests.
2. Also two "golden" stock ECDH positive tests.
3. For named curves with non-trivial cofactors, additionally two "golden"
ECC CDH positive tests.
4. For named curves with non-trivial cofactors, additionally two negative
tests.
There is some overlap with existing EVP tests, especially for the NIST
curves (for example, positive testing ECC CDH KATs for NIST curves).
"Golden" here means all the values are independent from OpenSSL's ECC
code. I used sage to calculate them. What comes from OpenSSL is:
1. The OIDs (parsed by tooling)
2. The curve parameters (parsing ecparam output with tooling)
The values inside the PEMs (private keys, public keys) and shared keys
are from sage. The PEMs themselves are the output of asn1parse, with
input taken from sage.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6608)
Currently if you encounter application data while waiting for a
close_notify from the peer, and you have called SSL_shutdown() then
you will get a -1 return (fatal error) and SSL_ERROR_SYSCALL from
SSL_get_error(). This isn't accurate (it should be SSL_ERROR_SSL) and
isn't persistent (you can call SSL_shutdown() again and it might then work).
We change this into a proper fatal error that is persistent.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6340)
In the case where we are shutdown for writing and awaiting a close_notify
back from a subsequent SSL_shutdown() call we skip over handshake data
that is received. This should not be treated as an error - instead it
should be signalled with SSL_ERROR_WANT_READ.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6340)
Implement support for stateful TLSv1.3 tickets, and use them if
SSL_OP_NO_TICKET is set.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6563)
Fix prototype warnings triggered by -Wstrict-prototypes when configuring
with `enable-ec_nistp_64_gcc_128`
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6556)
(introduced by commit 9186016582, which added -Wstrict-prototypes)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6555)
Use EVP_PKEY_set_alias_type to access
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6443)
We generate the secrets based on the nonce immediately so there is no
need to keep the nonce.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6415)
Under a mingw shell, the command line path conversion either mangles
file: URIs to something useless (file;C:\...) or not at all (which
can't be opened by the Windows C RTL unless we're really lucky), so we
simply skip testing them in that environment.
Fixes#6369
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6376)
TlsGetValue clears the last error even on success, so that callers may
distinguish it successfully returning NULL or failing. This error-mangling
behavior interferes with the caller's use of GetLastError. In particular
SSL_get_error queries the error queue to determine whether the caller should
look at the OS's errors. To avoid destroying state, save and restore the
Windows error.
Fixes#6299.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6316)
Per SEC 1, the curve coefficients must be padded up to size. See C.2's
definition of Curve, C.1's definition of FieldElement, and 2.3.5's definition
of how to encode the field elements in http://www.secg.org/sec1-v2.pdf.
This comes up for P-521, where b needs a leading zero.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6314)
Don't apply DNS name constraints to the subject CN when there's a
least one DNS-ID subjectAlternativeName.
Don't apply DNS name constraints to subject CN's that are sufficiently
unlike DNS names. Checked name must have at least two labels, with
all labels non-empty, no trailing '.' and all hyphens must be
internal in each label. In addition to the usual LDH characters,
we also allow "_", since some sites use these for hostnames despite
all the standards.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Because TLS 1.3 sends more non-application data records some clients run
into problems because they don't expect SSL_read() to return and set
SSL_ERROR_WANT_READ after processing it.
This can cause problems for clients that use blocking I/O and use
select() to see if data is available. It can be cleared using
SSL_CTX_clear_mode().
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #6260
In TLSv1.2 and below we always cache new sessions by default on the server
side in the internal cache (even when we're using session tickets). This is
in order to support resumption from a session id.
In TLSv1.3 there is no session id. It is only possible to resume using the
ticket. Therefore, in the default case, there is no point in caching the
session in the internal store.
There is still a reason to call the external cache new session callback
because applications may be using the callbacks just to know about when
sessions are created (and not necessarily implementing a full cache). If
the application also implements the remove session callback then we are
forced to also store it in the internal cache so that we can create
timeout events. Otherwise the external cache could just fill up
indefinitely.
This mostly addresses the issue described in #5628. That issue also proposes
having an option to not create full stateless tickets when using the
internal cache. That aspect hasn't been addressed yet.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6293)
Don't call the decrypt ticket callback if we've already encountered a
fatal error. Do call it if we have an empty ticket present.
Change the return code to have 5 distinct returns codes and separate it
from the input status value.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
The recent change in behaviour where you do not get a NewSessionTicket
message sent if you established the connection using a PSK caused a mem
leak to be triggered in sslapitest. It was actually a latent bug and we
were just lucky we never hit it before. The problem is due to complexity
with the way PSK sessions were set up in the early_data tests. PSK session
reference counting was handled differently to normal session reference
counting. This meant there were lots of special cases in the code where
we don't free a session if it is a PSK. It makes things easier if we just
handle PSK reference counts in the same way as other session reference
counts, and then we can remove all of the special case code.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
The return value from the ticket_key callback was not properly handled in
TLSv1.3, so that a ticket was *always* renewed even if the callback
requested that it should not be.
Also the ticket decrypt callback was not being called at all in TLSv1.3.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
If using an old style PSK callback and no certificate is configured for
the server, we should prefer ciphersuites based on SHA-256, because that
is the default hash for those callbacks as specified in the TLSv1.3 spec.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6215)
In certain circumstances in the DTLS code we have to drop a record (e.g. if
it is a stale retransmit). We then have to move on to try and read the next
record. Some applications using blocking sockets (e.g. s_server/s_client
will hang if there isn't actually any data to be read from the socket yet).
Others can tolerate this. Therefore SSL_read()/SSL_write() can sometimes
return SSL_ERROR_WANT_READ/SSL_ERROR_WANT_WRITE even when using blocking
sockets. Applications can use the mode SSL_MODE_AUTO_RETRY, to switch this
behaviour off so that we never return unless we have read the data we
wanted to.
Commit ad96225285 fixed a DTLS problem where we always retried even if
SSL_MODE_AUTO_RETRY was not set. However that fix caused the Boring
ossl_shim to fail in some tests because it was relying on the previous
(buggy) behaviour. The ossl_shim should be set into SSL_MODE_AUTO_RETRY if
it is not operating asynchronously to avoid this problem.
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6216)
Drop a record from a handshake and check that we can still complete the
handshake. Repeat for all records in the handshake.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6170)
Previous tests only invoked CMS via the command line app. This test uses
the CMS API directly to do and encrypt and decrypt operation. This test
would have caught the memory leak fixed by the previous commit (when
building with enable-crypto-mdebug).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6142)
The max protocol version was only being set on the server side. It should
have been done on both the client and the server.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6113)
No need to buildtest on opensslconf.h
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6149)
To my surprise, it turns out that on OpenVMS, opening './' (which
is translated to '[]') for writing actually creates a file, '[].'.
On OpenVMS, this is a perfectly valid file with no name or extension,
just the delimiter between the two.
Because of the mess the exception would generate in the test recipe,
it gets refactored again, to clearly separate each test inside it,
and use skips to avoid some of them (that makes it clear that they are
skipped and why, when running the recipe).
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6100)
Test writing to the null device. This should be successful.
Also, refactor so the planned number of tests is calculated.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6033)
The actual functionality of generating signatures through the `EVP_PKEY`
API is completely untested.
Current tests under the `EVP_PKEY` API
(`test/recipes/30-test_evp_data/evppkey.txt`) only cover `Verify` and
`Decrypt`, while encryption and signature generation are tested with
ad-hoc clients (`test/sm2crypttest.c`, `test/sm2signtest.c`) that do not
call the `EVP_PKEY` interface at all but soon-to-be private functions
that bypass it (cf. PR#5895 ).
It is my opinion that an ideal solution for the future would consist on
enhancing the `test/evp_pkey` facility and syntax to allow tests to take
control of the PRNG to inject known nonces and validate the results of
`EVP_PKEY` implementations against deterministic known answer tests, but
it is probably too late to work on this feature in time for next release.
Given that commit b5a85f70d8 highlights some critical bugs in the hook
between the `EVP_PKEY` interface and SM2 signature generation and that
these defects escaped testing and code review, I think that at least for
now it is beneficial to at least add the kind of "bogus" testing
provided by this patch:
this is a "fake" test as it does only verify that the SM2 `EVP_PKEY`
interface is capable of creating a signature without failing, but it
does not say anything about the generated signature being valid, nor
does it test the functional correctness of the cryptosystem.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6066)
The spec does not prohib certs form using compressed points. It only
requires that points in a key share are uncompressed. It says nothing
about point compression for certs, so we should not fail if a cert uses a
compressed point.
Fixes#5743
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6055)
This fixes only those tests that were failing when network data was
fragmented. Remaining ones might succeed for "wrong reasons". Bunch
of tests have to fail to be considered successful and when data is
fragmented they might fail for reasons other than originally intended.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5975)
Client can only send early data if the PSK allows for it, the
max_early_data_size field can only be configured for the server side.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5702)
This will be necessary to enable Wireshark to decrypt QUIC 0-RTT data.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5702)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5702)
The SSL_set_bio() tests only did standalone testing without being in the
context of an actual connection. We extend this to do additional tests
following a successful or failed connection attempt. This would have
caught the issue fixed in the previous commit.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5966)
Make sure the info callback gets called in all the places we expect it to.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5874)
- drbg_lib.c: Silence coverity warning: the comment preceding the
RAND_DRBG_instantiate() call explicitely states that the error
is ignored and explains the reason why.
- drbgtest: Add checks for the return values of RAND_bytes() and
RAND_priv_bytes() to run_multi_thread_test().
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5976)
Bind even test/ssltest_old.c to loopback interface. This allows to avoid
unnecessary alerts from Windows and Mac OS X firewalls.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5933)
There is a test to check that 'genrsa' doesn't accept absurdly low
number of bits. Apart from that, this test is designed to check the
working functionality of 'openssl genrsa', so instead of having a hard
coded lower limit on the size key, let's figure out what it is.
Partially fixes#5751
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5754)
(cherry picked from commit ec46830f8a)
HP-UX gmtime fails with ERANGE past 19011213204552Z, so skip some tests.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5742)
felem_neg does not produce an output within the tight bounds suitable
for felem_contract. This affects build configurations which set
enable-ec_nistp_64_gcc_128.
point_double and point_add, in the non-z*_is_zero cases, tolerate and
fix up the wider bounds, so this only affects point_add calls where the
other point is infinity. Thus it only affects the final addition in
arbitrary-point multiplication, giving the wrong y-coordinate. This is a
no-op for ECDH and ECDSA, which only use the x-coordinate of
arbitrary-point operations.
Note: ecp_nistp521.c has the same issue in that the documented
preconditions are violated by the test case. I have not addressed this
in this PR. ecp_nistp521.c does not immediately produce the wrong
answer; felem_contract there appears to be a bit more tolerant than its
documented preconditions. However, I haven't checked the point_add
property above holds. ecp_nistp521.c should either get this same fix, to
be conservative, or have the bounds analysis and comments reworked for
the wider bounds.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5779)
If a nonce is required and the get_nonce callback is NULL, request 50%
more entropy following NIST SP800-90Ar1 section 9.1.
Reviewed-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
GH: #5503
Casting to the generic function type "void (*)(void)"
prevents the warning.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/5816)
test/cipherlist_test.c is an internal consistency check, and therefore
requires that the shared library it runs against matches what it was
built for. test/recipes/test_cipherlist.t is made to refuse running
unless library version and build version match.
This adds a helper program test/versions.c, that simply displays the
library and the build version.
Partially fixes#5751
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5753)
(cherry picked from commit cde87deafa)
Instead of invoking the fuzz test programs once for every corpora
file, we invoke them once for each directory of corpora files. This
dramatically reduces the number of program invikations, as well as the
time 99-test_fuzz.t takes to complete.
fuzz/test-corpus.c was enhanced to handle directories as well as
regular files.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5776)
If a server has been configured to use an ECDSA certificate, we should
allow it regardless of whether the server's own supported groups list
includes the certificate's group.
Fixes#2033
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5601)
The previous commit causes some tests to hang so we temporarily disable them.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5757)
myDSO_dsobyaddr and myDSO_free are only used in a narrow block of
code, and can therefore be made local to that block. Otherwise, some
compilers may warn that they are unused.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5733)
These errors were hidden because compiling this file didn't get the
macros derived from the dso_scheme attribute, and therefore, some code
never got compiled.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5733)
Although it deviates from the actual prototype of DSO_dsobyaddr(), this
is now ISO C compliant and gcc -Wpedantic accepts the code.
Added DATA segment checking to catch ptrgl virtual addresses. Avoid
memleaks with every AIX/dladdr() call. Removed debug-fprintf()s.
Added test case for DSO_dsobyaddr(), which will eventually call dladdr().
Removed unecessary AIX ifdefs again.
The implementation can only lookup function symbols, no data symbols.
Added PIC-flag to aix*-cc build targets.
As AIX is missing a dladdr() implementation it is currently uncertain our
exit()-handlers can still be called when the application exits. After
dlclose() the whole library might have been unloaded already.
Signed-off-by: Matthias Kraft <makr@gmx.eu>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5668)
The travis logs are going above 4Mb causing the builds to fail. One
test creates excessive output. This change reduces that output by approx
180k.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5694)
[extended tests]
The test_rand_reseed assumed that the global DRBGs were not used
previously. This assumption is false when the tests are executed
in random order (OPENSSL_TEST_RAND_ORDER). So we uninstantiate
them first and add a test for the first instantiation.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5680)
The error string header files aren't supposed to be included directly,
so there's no point testing that they can.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5678)
Have all test programs using that function specify those versions.
Additionally, have the remaining test programs that use SSL_CTX_new
directly specify at least the maximum protocol version.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5663)
The fix in conf_include_test.c seems to be required because some
compilers give an error if you give an empty string for the second
argument to strpbrk(). It doesn't really make sense to send an empty
string for this argument anyway, so make sure it has at least one character
in it.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5666)
When SSL_CTX is created preinitialize it with system default
configuration from system_default section.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4848)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5547)
Without actually using EVP_PKEY_FLAG_AUTOARGLEN
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4793)
Don't pass a pointer to uninitialized processed value
for BIO_CB_READ and BIO_CB_WRITE
Check the correct cmd code in BIO_callback_ctrl
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5516)
Raw private/public key loading may fail for X25519/X448 if ec has been
disabled.
Also fixed a missing blank line in evppkey.txt resulting in a warning in
the test output.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5664)
Conceptually in TLSv1.3 there can be multiple sessions associated with a
single connection. Each NewSessionTicket issued can be considered a
separate session. We can end up issuing multiple NewSessionTickets on a
single connection at the moment (e.g. in a post-handshake auth scenario).
Each of those issued tickets should have the new_session_cb called, it
should go into the session cache separately and it should have a unique
id associated with it (so that they can be found individually in the
cache).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5644)
When doing a regression test, it's obvious that the version
test/shlibloadtest is built for will not be the same as the library
version. So we change the test to check for assumed compatibility.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5619)
Renamed to EVP_PKEY_new_raw_private_key()/EVP_new_raw_public_key() as per
feedback.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
Previously private and public keys had to be pem encoded to be read by
evp_test. This enables us to embed the raw private/public key values
in the test file. The algorithm has to support EVP_PKEY_new_private_key()
and EVP_PKEY_new_public_key() for this to work.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
Random path generation code in test/recipes/15-test_out_option.t
does not work: The code sets rand_path to "/test.pem". I.e. the
test will fail as expected for unprivileged user but will pass
for root user.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5595)
A place in clienthellotest was missed in converting to the new mechanism
for configuration of TLSv1.3 ciphersuites.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5392)
With the current mechanism, old cipher strings that used to work in 1.1.0,
may inadvertently disable all TLSv1.3 ciphersuites causing connections to
fail. This is confusing for users.
In reality TLSv1.3 are quite different to older ciphers. They are much
simpler and there are only a small number of them so, arguably, they don't
need the same level of control that the older ciphers have.
This change splits the configuration of TLSv1.3 ciphers from older ones.
By default the TLSv1.3 ciphers are on, so you cannot inadvertently disable
them through your existing config.
Fixes#5359
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5392)
These functions are similar to SSL_CTX_set_cookie_{generate,verify}_cb,
but used for the application-controlled portion of TLS1.3 stateless
handshake cookies rather than entire DTLSv1 cookies.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5463)
The ossl_shim doesn't know about TLSv1.3 so we should disable that
protocol version for all tests for now.
This fixes the current Travis failures.
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5593)
Adds application data into the encrypted session ticket
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3802)
Commit abe256e795 changed the config target
element from 'cxx' to 'CXX'; catch up accordingly.
Also use a space to offset the template boundary, per convention.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5577)
This patch fixes two issues in the ia32 RDRAND assembly code that result in a
(possibly significant) loss of entropy.
The first, less significant, issue is that, by returning success as 0 from
OPENSSL_ia32_rdrand() and OPENSSL_ia32_rdseed(), a subtle bias was introduced.
Specifically, because the assembly routine copied the remaining number of
retries over the result when RDRAND/RDSEED returned 'successful but zero', a
bias towards values 1-8 (primarily 8) was introduced.
The second, more worrying issue was that, due to a mixup in registers, when a
buffer that was not size 0 or 1 mod 8 was passed to OPENSSL_ia32_rdrand_bytes
or OPENSSL_ia32_rdseed_bytes, the last (n mod 8) bytes were all the same value.
This issue impacts only the 64-bit variant of the assembly.
This change fixes both issues by first eliminating the only use of
OPENSSL_ia32_rdrand, replacing it with OPENSSL_ia32_rdrand_bytes, and fixes the
register mixup in OPENSSL_ia32_rdrand_bytes. It also adds a sanity test for
OPENSSL_ia32_rdrand_bytes and OPENSSL_ia32_rdseed_bytes to help catch problems
of this nature in the future.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5342)
PR #3399 converted shlibloadtest to the new test framework. It also
seemed to add some `OPENSSL_USE_NODELETE` guards to the library
unloading part of the test. This part was added in a commit with this
description:
Review feedback; use single main, #ifdef ADD_TEST
Suppose OPENSSL_USE_NODELETE (via Nick Reilly)
Strangely though there doesn't seem to be any relevant review feedback
in that PR that could justify the addition of those guards. The guards
do not appear in 1.1.0.
Having the guards changes the nature of the test, so that we only test
library unloading on platforms where OPENSSL_USE_NODELETE is set (Linux
and Windows). I can't think of any good reason for this and as it doesn't
seem to be necessary in 1.1.0 so I think we should remove them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5530)
Had been observed with recent gcc-8 snapshot and
$ ./config --strict-warnings enable-asan
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5519)
Either files or directories of *.cnf or *.conf files
can be included.
Recursive inclusion of directories is not supported.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5351)
This adds the Ed448 test vectors from RFC8032 and the X448 test vectors
from RFC7748.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/5481)
When early data support was first added, this seemed like a good
idea, as it would allow applications to just add SSL_read_early_data()
calls as needed and have things "Just Work". However, for applications
that do not use TLS 1.3 early data, there is a negative side effect.
Having a nonzero max_early_data in a SSL_CTX (and thus, SSL objects
derived from it) means that when generating a session ticket,
tls_construct_stoc_early_data() will indicate to the client that
the server supports early data. This is true, in that the implementation
of TLS 1.3 (i.e., OpenSSL) does support early data, but does not
necessarily indicate that the server application supports early data,
when the default value is nonzero. In this case a well-intentioned
client would send early data along with its resumption attempt, which
would then be ignored by the server application, a waste of network
bandwidth.
Since, in order to successfully use TLS 1.3 early data, the application
must introduce calls to SSL_read_early_data(), it is not much additional
burden to require that the application also calls
SSL_{CTX_,}set_max_early_data() in order to enable the feature; doing
so closes this scenario where early data packets would be sent on
the wire but ignored.
Update SSL_read_early_data.pod accordingly, and make s_server and
our test programs into applications that are compliant with the new
requirements on applications that use early data.
Fixes#4725
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5483)
Otherwise we get a use after free if the test order is randomised.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5467)
fabs(3m) is customarily inlined, but it's not, one has to link with -lm.
Since fabs(3m) is the only reference, it makes more sense to avoid it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This commit adds SSL_export_keying_material_early() which exports
keying material using early exporter master secret.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5252)
Thanks to Norm Green for reporting this issue.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5423)
The internals test programs access header files that aren't guarded by
the public __DECC_INCLUDE_PROLOGUE.H and __DECC_INCLUDE_EPILOGUE.H
files, and therefore have no idea what the naming convention is.
Therefore, we need to specify that explicitely in the internals test
programs, since they aren't built with the same naming convention as
the library they belong with.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5425)
So far check for availability of Win32::API served as implicit check
for $^O being MSWin32. Reportedly it's not safe assumption, and check
for MSWin32 has to be explicit.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5416)
According to TLSv1.3 draft-24 the record version for ClientHello2 should
be TLS1.2, and not TLS1.0 as it is now.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5377)
Without that, output comes one character per line. It's the same
issue as has been observed before, this happens when using write()
on a record oriented stream (possibly unbuffered too).
This also uncovered a bug in BIO_f_linebuffer, where this would cause
an error:
BIO_write(bio, "1\n", 1);
I.e. there's a \n just after the part of the string that we currently
ask to get written.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5352)
The NIST standard presents two alternative ways for seeding the
CTR DRBG, depending on whether a derivation function is used or not.
In Section 10.2.1 of NIST SP800-90Ar1 the following is assessed:
The use of the derivation function is optional if either an
approved RBG or an entropy source provides full entropy output
when entropy input is requested by the DRBG mechanism.
Otherwise, the derivation function shall be used.
Since the OpenSSL DRBG supports being reseeded from low entropy random
sources (using RAND_POOL), the use of a derivation function is mandatory.
For that reason we change the default and replace the opt-in flag
RAND_DRBG_FLAG_CTR_USE_DF with an opt-out flag RAND_DRBG_FLAG_CTR_NO_DF.
This change simplifies the RAND_DRBG_new() calls.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5294)
The no-tls1_2 option does not work properly in conjunction with TLSv1.3
being enabled (which is now the default). This commit fixes the issues.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5301)
tls13encryptiontest is an "internal" test. As with all the other internal
tests it should not be run on a shared native Windows build.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5266)
If TLSv1.3 is enabled and combined with other options that extend the
size of the ClientHello, then the clienthello test can sometimes fail
because the ClientHello has grown too large. Part of the purpose of the
test is to check that the padding extension works properly. This requires
the ClientHello size to be kept within certain bounds.
By restricting the number of ciphersuites sent we can reduce the size of
the ClientHello.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5266)
It turns out that even if you successfully build the engine, it might
not load properly, so we cannot make the test program fail for it.
See the message in commit 25b9d11c00
This reverts commit 227a1e3f45.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5276)
The afalg engine was moved down from engines/afalg/ to engines/, but
the test wasn't changed accordingly. This was undetected because the
test program didn't fail when it couldn't load the engine.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5270)
If you know that there's no afalg engine, don't run this test.
test/recipes/30-test_afalg.t checks this correctly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5270)
Add SSL_verify_client_post_handshake() for servers to initiate PHA
Add SSL_force_post_handshake_auth() for clients that don't have certificates
initially configured, but use a certificate callback.
Update SSL_CTX_set_verify()/SSL_set_verify() mode:
* Add SSL_VERIFY_POST_HANDSHAKE to postpone client authentication until after
the initial handshake.
* Update SSL_VERIFY_CLIENT_ONCE now only sends out one CertRequest regardless
of when the certificate authentication takes place; either initial handshake,
re-negotiation, or post-handshake authentication.
Add 'RequestPostHandshake' and 'RequirePostHandshake' SSL_CONF options that
add the SSL_VERIFY_POST_HANDSHAKE to the 'Request' and 'Require' options
Add support to s_client:
* Enabled automatically when cert is configured
* Can be forced enabled via -force_pha
Add support to s_server:
* Use 'c' to invoke PHA in s_server
* Remove some dead code
Update documentation
Update unit tests:
* Illegal use of PHA extension
* TLSv1.3 certificate tests
DTLS and TLS behave ever-so-slightly differently. So, when DTLS1.3 is
implemented, it's PHA support state machine may need to be different.
Add a TODO and a #error
Update handshake context to deal with PHA.
The handshake context for TLSv1.3 post-handshake auth is up through the
ClientFinish message, plus the CertificateRequest message. Subsequent
Certificate, CertificateVerify, and Finish messages are based on this
handshake context (not the Certificate message per se, but it's included
after the hash). KeyUpdate, NewSessionTicket, and prior Certificate
Request messages are not included in post-handshake authentication.
After the ClientFinished message is processed, save off the digest state
for future post-handshake authentication. When post-handshake auth occurs,
copy over the saved handshake context into the "main" handshake digest.
This effectively discards the any KeyUpdate or NewSessionTicket messages
and any prior post-handshake authentication.
This, of course, assumes that the ID-22 did not mean to include any
previous post-handshake authentication into the new handshake transcript.
This is implied by section 4.4.1 that lists messages only up to the
first ClientFinished.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4964)
This avoids having to enumerate specific modules in apps, or to have
to include them in libtestutil.a.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5222)
The rehash test broke the test if run by root. Instead, just skip the
check that requires non-root to be worth it.
Fixes#4387
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5184)
Make the sigalg name in comments reflect one that actually exists
in the draft standard.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5174)
We don't need to send this extension in normal operation since
we are our own X.509 library, but add some test cases that force
the extension to be sent and exercise our code to process the extension.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5068)
We now have a split in the signature algorithms codepoint space for
whether the certificate's key is for rsaEncryption or a PSS-specific
key, which should let us get rid of some special-casing that we
previously needed to try to coax rsaEncryption keys into performing PSS.
(This will be done in a subsequent commit.)
Send the new PSS-with-PSS-specific key first in our list, so that
we prefer the new technology to the old one.
We need to update the expected certificate type in one test,
since the "RSA-PSS+SHA256" form now corresponds to a public key
of type rsaEncryption, so we should expect the server certificate
type to be just "RSA". If we want to get a server certificate
type of "RSA-PSS", we need to use a new signature algorithm
that cannot be represented as signature+hash, so add a test for that
as well.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5068)
Support added for these two digests, available only via the EVP interface.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5093)
That inclusion turned out to be completely unnecessary
[extended tests]
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5136)
This includes unnecessary use of the top as inclusion directory
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5132)
The DRGB concept described in NIST SP 800-90A provides for having different
algorithms to generate random output. In fact, the FIPS object module used to
implement three of them, CTR DRBG, HASH DRBG and HMAC DRBG.
When the FIPS code was ported to master in #4019, two of the three algorithms
were dropped, and together with those the entire code that made RAND_DRBG
generic was removed, since only one concrete implementation was left.
This commit restores the original generic implementation of the DRBG, making it
possible again to add additional implementations using different algorithms
(like RAND_DRBG_CHACHA20) in the future.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4998)
Add a regression test for the functionality enabled in the
previous commit.
[extended tests]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4463)
Similar to commit 17b602802114d53017ff7894319498934a580b17(
"Remove extra `the` in SSL_SESSION_set1_id.pod"), this commit removes
typos where additional 'the' have been added.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4999)
Every DRBG now supports automatic reseeding not only after a given
number of generate requests, but also after a specified time interval.
Signed-off-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4402)
A third shared DRBG is added, the so called master DRBG. Its sole purpose
is to reseed the two other shared DRBGs, the public and the private DRBG.
The randomness for the master DRBG is either pulled from the os entropy
sources, or added by the application using the RAND_add() call.
The master DRBG reseeds itself automatically after a given number of generate
requests, but can also be reseeded using RAND_seed() or RAND_add().
A reseeding of the master DRBG is automatically propagated to the public
and private DRBG. This construction fixes the problem, that up to now
the randomness provided by RAND_add() was added only to the public and
not to the private DRBG.
Signed-off-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4402)
The new ServerHello format is essentially now the same as the old TLSv1.2
one, but it must additionally include supported_versions. The version
field is fixed at TLSv1.2, and the version negotiation happens solely via
supported_versions.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4701)
As per documentation, the RSA keys should not be smaller than 64bit (the
documentation mentions something about a quirk in the prime generation
algorithm). I am adding check into the code which used to be 16 for some
reason.
My primary motivation is to get rid of the last sentence in the
documentation which suggest that typical keys have 1024 bits (instead
updating it to the now default 2048).
I *assume* that keys less than the 2048 bits (say 512) are used for
education purposes.
The 512 bits as the minimum have been suggested by Bernd Edlinger.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4547)
In 20-cert-select.conf there is a TLSv1.1 specific test which we should
skip if TLSv1.1. is disabled.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4890)
The tests in 25-cipher.conf all use TLSv1.2 ciphersuites so we shouldn't
run it if we don't have TLSv1.2
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4889)
s_client -status is not available in this configuration.
While here, remove an outdated TODO(TLS1.3) comment.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4873)
make_dummy_resp() uses OCSP types, and get_cert_and_key() is unused
once make_dummy_resp() is compiled out, so neither can be included
in the build when OCSP is disabled and strict warnings are active.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4873)
There's no reason to wrap this call in TEST_true() if we're not
checking the return value of TEST_true() -- all of the surrounding
similar calls do not have the macro wrapping them.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4873)
Avoid memory leaks in error paths, and correctly apply
parentheses to function calls in a long if-chain.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4873)
fix indentation, remove printf from afalgtest.c
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4717)
Test reading/writing to an SSL object after a fatal error has been
detected. This CVE only affected 1.0.2, but we should add it to other
branches for completeness.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
An error reason code has changed for one of the boring tests, so
ossl_config.json needed an update to take account of it.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)
IFF the client has ChaCha first, and server cipher priority is used,
and the new SSL_OP_PRIORITIZE_CHACHA_FOR_MOBILE option is used,
then reprioritize ChaCha above everything else. This way, A matching
ChaCha cipher will be selected if there is a match. If no ChaCha ciphers
match, then the other ciphers are used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4436)
Commit 30bea14be6 converted bntest.c to the new TEST framework.
Unfortunately a missing "goto err" means that the lshift tests skip
the actual bit that tests them. Replacing the "goto err" reveals that
the conversion also broke the tests. This adds back the missing "goto err"
and fixes the tests.
Fixes#4808
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4809)
Switch to make it return an uint32_t instead of the various different
types it returns now.
Fixes: #3125
Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #4757
Fixes#4740
The MSYS2 run-time convert arguments that look like paths when
executing a program unless that application is linked with the MSYS
run-time. The exact conversion rules are listed here:
http://www.mingw.org/wiki/Posix_path_conversion
With the built-in configurations (all having names starting with
"mingw"), the openssl application is not linked with the MSYS2
run-time, and therefore, it will receive possibly converted arguments
from the process that executes it. This conversion is fine for normal
path arguments, but it happens that some arguments to the openssl
application get converted when they shouldn't. In one case, it's
arguments like '-passin file:something', and in another, it's a file:
URI (what typically happens is that URIs without an authority
component get converted, 'cause the conversion mechanism doesn't
recognise them as URIs).
To avoid conversion where we don't want it, we simply assign
MSYS2_ARG_CONV_EXCL a pattern to avoid specific conversions. As a
precaution, we only do this where we obviously need it.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4765)
SNI needs to be consistent before we accept early_data. However a
server may choose to not acknowledge SNI. In that case we have to
expect that a client may send it anyway. We change the consistency
checks so that not acknowledging is treated more a like a "wild card",
accepting any SNI as being consistent.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4738)
* Introduce RSA_generate_multi_prime_key to generate multi-prime
RSA private key. As well as the following functions:
RSA_get_multi_prime_extra_count
RSA_get0_multi_prime_factors
RSA_get0_multi_prime_crt_params
RSA_set0_multi_prime_params
RSA_get_version
* Support EVP operations for multi-prime RSA
* Support ASN.1 operations for multi-prime RSA
* Support multi-prime check in RSA_check_key_ex
* Support multi-prime RSA in apps/genrsa and apps/speed
* Support multi-prime RSA manipulation functions
* Test cases and documentation are added
* CHANGES is updated
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4241)
EVP_PKEY_public_check() and EVP_PKEY_param_check()
Doc and test cases are added
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4647)
..\test\asn1_internal_test.c(96): warning C4113: 'int (__cdecl *)()'
differs in parameter lists from 'int (__cdecl *)(void)'
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4744)
It's argued that /WX allows to keep better focus on new code, which
motivates its comeback...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)
Some of the OCSP APIs (such as the recently added OCSP_resp_get0_signer)
do not really merit inclusion in the ocsp(1) utility, but we should still
have unit tests for them.
For now, only test OCSP_resp_get0_signer(), but it should be easy to
add more tests in the future.
Provide an X509 cert and private key in the test's data directory
to use for signing responses, since constructing those on the fly
is more effort than is needed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4573)
Around 138 distinct errors found and fixed; thanks!
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)
SM3 is a secure hash function which is part of the Chinese
"Commercial Cryptography" suite of algorithms which use is
required for certain commercial applications in China.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4616)
A block of six TEST_int_xy() macro definitions was duplicated.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4624)
The check should reject kernel versions < 4.1.0, not <= 4.1.0.
The issue was spotted on OpenSUSE 42.1 Leap, since its linux/version.h
header advertises 4.1.0.
CLA: trivial
Fixes: 7f458a48 ("ALG: Add AFALG engine")
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4617)
This would cut out some distracting noise in the test output
if we ended up hitting these error cases.
Reported by Coverity.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4602)
Thanks to David Benjamin for suggesting the fix needed by this fix.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4607)
Reseeding is handled very differently by the classic RAND_METHOD API
and the new RAND_DRBG api. These differences led to some problems when
the new RAND_DRBG was made the default OpenSSL RNG. In particular,
RAND_add() did not work as expected anymore. These issues are discussed
on the thread '[openssl-dev] Plea for a new public OpenSSL RNG API'
and in Pull Request #4328. This commit fixes the mentioned issues,
introducing the following changes:
- Replace the fixed size RAND_BYTES_BUFFER by a new RAND_POOL API which
facilitates collecting entropy by the get_entropy() callback.
- Don't use RAND_poll()/RAND_add() for collecting entropy from the
get_entropy() callback anymore. Instead, replace RAND_poll() by
RAND_POOL_acquire_entropy().
- Add a new function rand_drbg_restart() which tries to get the DRBG
in an instantiated state by all means, regardless of the current
state (uninstantiated, error, ...) the DRBG is in. If the caller
provides entropy or additional input, it will be used for reseeding.
- Restore the original documented behaviour of RAND_add() and RAND_poll()
(namely to reseed the DRBG immediately) by a new implementation based
on rand_drbg_restart().
- Add automatic error recovery from temporary failures of the entropy
source to RAND_DRBG_generate() using the rand_drbg_restart() function.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4328)
Previously if a client received an HRR then we would do version negotiation
immediately - because we know we are going to get TLSv1.3. However this
causes a problem when we emit the 2nd ClientHello because we start changing
a whole load of stuff to ommit things that aren't relevant for < TLSv1.3.
The spec requires that the 2nd ClientHello is the same except for changes
required from the HRR. Therefore the simplest thing to do is to defer the
version negotiation until we receive the ServerHello.
Fixes#4292
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4527)
Test for the bug where early_data is not accepted by the server when it
does not have an SNI callback set up, but the client sent a servername in
the initial ClientHello establishing the session.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4519)
test/bad_dtls_test.c: In function 'validate_client_hello':
test/bad_dtls_test.c:128:33: error: 'u' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (!PACKET_get_1(&pkt, &u) || u != SSL3_RT_HANDSHAKE)
^
Apparently -O1 does not perform sufficient optimization to ascertain
that PACKET_get_1 will always initialize u if it returns true.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4518)
When an SSL's context is swtiched from a ticket-enabled context to
a ticket-disabled context in the servername callback, no session-id
is generated, so the session can't be resumed.
If a servername callback changes the SSL_OP_NO_TICKET option, check
to see if it's changed to disable, and whether a session ticket is
expected (i.e. the client indicated ticket support and the SSL had
tickets enabled at the time), and whether we already have a previous
session (i.e. s->hit is set).
In this case, clear the ticket-expected flag, remove any ticket data
and generate a session-id in the session.
If the SSL hit (resumed) and switched to a ticket-disabled context,
assume that the resumption was via session-id, and don't bother to
update the session.
Before this fix, the updated unit-tests in 06-sni-ticket.conf would
fail test #4 (server1 = SNI, server2 = no SNI).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/1529)
This allows the caller to guarantee that there is sufficient space for a
number of insertions without reallocation.
The expansion ratio when reallocating the array is reduced to 1.5 rather than 2.
Change bounds testing to use a single size rather than both INT_MAX and
SIZE_MAX. This simplifies some of the tests.
Switch the stack pointers to data from char * to void *
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4386)
The pub_key field for DH isn't actually used in DH_compute_key at all.
(Note the peer public key is passed in as as BIGNUM.) It's mostly there
so the caller may extract it from DH_generate_key. It doesn't
particularly need to be present if filling in a DH from external
parameters.
The check in DH_set0_key conflicts with adding OpenSSL 1.1.0 to Node.
Their public API is a thin wrapper over the old OpenSSL one:
https://nodejs.org/api/crypto.html#crypto_class_diffiehellman
They have separate setPrivateKey and setPublicKey methods, so the public
key may be set last or not at all. In 1.0.2, either worked fine since
operations on DH objects generally didn't use the public key. (Like
with OpenSSL, Node's setPublicKey method is also largely a no-op, but so
it goes.) In 1.1.0, DH_set0_key prevents create a private-key-only DH
object.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4384)
This guards against the name constraints check consuming large amounts
of CPU time when certificates in the presented chain contain an
excessive number of names (specifically subject email names or subject
alternative DNS names) and/or name constraints.
Name constraints checking compares the names presented in a certificate
against the name constraints included in a certificate higher up in the
chain using two nested for loops.
Move the name constraints check so that it happens after signature
verification so peers cannot exploit this using a chain with invalid
signatures. Also impose a hard limit on the number of name constraints
check loop iterations to further mitigate the issue.
Thanks to NCC for finding this issue. Fix written by Martin Kreichgauer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4393)
A new method is added to EVP_PKEY_METH as:
int (*check) (EVP_PKEY_CTX *ctx);
and to EVP_PKEY_ASN1_METHOD as:
int (*pkey_check) (EVP_PKEY_CTX *ctx);
This is used to check the validity of a specific key.
The order of calls is:
EVP_PKEY_check -> pmeth.check -> ameth.pkey_check.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4337)
It is otherwise unclear what all the magic numbers mean.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4349)
"Early callback" is a little ambiguous now that early data exists.
Perhaps "ClientHello callback"?
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4349)
The extensions not sent when TLS 1.2 is not used caused the message
length to be 109, which is less than the 127 threshold needed
to activate the F5 workaround. Add another 20 bytes of dummy ALPN
data do push it over the threshold.
Also, fix the definition of the (unused) local macro indicating
the threshold.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4346)
clienthellotest tries to fill out the size of the ClientHello by adding
extra ciphersuites in order to test the padding extension. This is
unreliable because they are very dependent on configuration options. If we
add too much data the test will fail! We were already also adding some dummy
ALPN protocols to pad out the size, and it turns out that this is sufficient
just in itself, so drop the extra ciphersuites.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4331)
Ironically enough not all installations get Module::Load::Conditional
installed by default... [It's a bit half-hearted, because such
installations are likely to lack more stuffi that is needed, but
nevertheless, it proved to be helpful.]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4323)
If the server_name extension is long enough to require two bytes to
hold the length of either field, the test suite would not decode
the length properly. Using the PACKET_ APIs would have avoided this,
but it was desired to avoid using private APIs in this part of the
test suite, to keep ourselves honest.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4318)
The include search path was not picking up files in the root of
the tree.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4316)
