This is a major overhaul of the TLSv1.3 state machine. Currently it still
looks like TLSv1.2. This commit changes things around so that it starts
to look a bit less like TLSv1.2 and bit more like TLSv1.3.
After this commit we have:
ClientHello
+ key_share ---->
ServerHello
+key_share
{CertificateRequest*}
{Certificate*}
{CertificateStatus*}
<---- {Finished}
{Certificate*}
{CertificateVerify*}
{Finished} ---->
[ApplicationData] <---> [Application Data]
Key differences between this intermediate position and the final TLSv1.3
position are:
- No EncryptedExtensions message yet
- No server side CertificateVerify message yet
- CertificateStatus still exists as a separate message
- A number of the messages are still in the TLSv1.2 format
- Still running on the TLSv1.2 record layer
Reviewed-by: Rich Salz <rsalz@openssl.org>
TLSv1.3 has a NewSessionTicket message, but it is *completely* different to
the TLSv1.2 one and may as well have been called something else. This commit
removes the old style NewSessionTicket from TLSv1.3. We will have to add the
new style one back in later.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The previous commits put in place the logic to exchange key_share data. We
now need to do something with that information. In <= TLSv1.2 the equivalent
of the key_share extension is the ServerKeyExchange and ClientKeyExchange
messages. With key_share those two messages are no longer necessary.
The commit removes the SKE and CKE messages from the TLSv1.3 state machine.
TLSv1.3 is completely different to TLSv1.2 in the messages that it sends
and the transitions that are allowed. Therefore, rather than extend the
existing <=TLS1.2 state transition functions, we create a whole new set for
TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time
they will be amended.
The new TLSv1.3 transitions remove SKE and CKE completely. There's also some
cleanup for some stuff which is not relevant to TLSv1.3 and is easy to
remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN.
I also disable EXTMS for TLSv1.3. Using it was causing some added
complexity, so rather than fix it I removed it, since eventually it will not
be needed anyway.
Reviewed-by: Rich Salz <rsalz@openssl.org>
At the moment the server doesn't yet do anything with this information.
We still need to send the server's key_share info back to the client. That
will happen in subsequent commits.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In this commit we just generate the extension on the client side, but don't
yet do anything with it. Subsequent commits, will add the server side
capability.
At the moment we hard code a single key_share. In the future we should make
this configurable.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is a skin deep change, which simply renames most places where we talk
about curves in a TLS context to groups. This is because TLS1.3 has renamed
the extension, and it can now include DH groups too. We still only support
curves, but this rename should pave the way for a future extension for DH
groups.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There were a few places where they could be declared const so this commit
does that.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The name and type of the argument to ssl_check_for_safari() has changed.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Includes addition of the various options to s_server/s_client. Also adds
one of the new TLS1.3 ciphersuites.
This isn't "real" TLS1.3!! It's identical to TLS1.2 apart from the protocol
and the ciphersuite...and the ciphersuite is just a renamed TLS1.2 one (not
a "real" TLS1.3 ciphersuite).
Reviewed-by: Rich Salz <rsalz@openssl.org>
ssl_set_handshake_header2() was only ever a temporary name while we had
to have ssl_set_handshake_header() for code that hadn't been converted to
WPACKET yet. No code remains that needed that so we can rename it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove the old ssl_set_handshake_header() implementations. Later we will
rename ssl_set_handshake_header2() to ssl_set_handshake_header().
Reviewed-by: Rich Salz <rsalz@openssl.org>
This was a temporary function needed during the conversion to WPACKET. All
callers have now been converted to the new way of doing this so this
function is no longer required.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If a server sent multiple NPN extensions in a single ClientHello then a
mem leak can occur. This will only happen where the client has requested
NPN in the first place. It does not occur during renegotiation. Therefore
the maximum that could be leaked in a single connection with a malicious
server is 64k (the maximum size of the ServerHello extensions section). As
this is client side, only occurs if NPN has been requested and does not
occur during renegotiation this is unlikely to be exploitable.
Issue reported by Shi Lei.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A malicious client can send an excessively large OCSP Status Request
extension. If that client continually requests renegotiation,
sending a large OCSP Status Request extension each time, then there will
be unbounded memory growth on the server. This will eventually lead to a
Denial Of Service attack through memory exhaustion. Servers with a
default configuration are vulnerable even if they do not support OCSP.
Builds using the "no-ocsp" build time option are not affected.
I have also checked other extensions to see if they suffer from a similar
problem but I could not find any other issues.
CVE-2016-6304
Issue reported by Shi Lei.
Reviewed-by: Rich Salz <rsalz@openssl.org>
All the other functions that take an argument for the number of bytes
use convenience macros for this purpose. We should do the same with
WPACKET_put_bytes().
Reviewed-by: Rich Salz <rsalz@openssl.org>
Updated the construction code to use the new function. Also added some
convenience macros for WPACKET_sub_memcpy().
Reviewed-by: Rich Salz <rsalz@openssl.org>
A few style tweaks here and there. The main change is that curr and
packet_len are now offsets into the buffer to account for the fact that
the pointers can change if the buffer grows. Also dropped support for the
WPACKET_set_packet_len() function. I thought that was going to be needed
but so far it hasn't been. It doesn't really work any more due to the
offsets change.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If a ticket callback changes the HMAC digest to SHA512 the existing
sanity checks are not sufficient and an attacker could perform a DoS
attack with a malformed ticket. Add additional checks based on
HMAC size.
Thanks to Shi Lei for reporting this bug.
CVE-2016-6302
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Run util/openssl-format-source on ssl/
Some comments and hand-formatted tables were fixed up
manually by disabling auto-formatting.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When handling ECDH check to see if the curve is "custom" (X25519 is
currently the only curve of this type) and instead of setting a curve
NID just allocate a key of appropriate type.
Reviewed-by: Rich Salz <rsalz@openssl.org>
- Always process ALPN (previously there was an early return in the
certificate status handling)
- Don't send a duplicate alert. Previously, both
ssl_check_clienthello_tlsext_late and its caller would send an
alert. Consolidate alert sending code in the caller.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)
When session tickets are used, it's possible that SNI might swtich the
SSL_CTX on an SSL. Normally, this is not a problem, because the
initial_ctx/session_ctx are used for all session ticket/id processes.
However, when the SNI callback occurs, it's possible that the callback
may update the options in the SSL from the SSL_CTX, and this could
cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things
can happen:
1. The session ticket TLSEXT may not be written when the ticket expected
flag is set. The state machine transistions to writing the ticket, and
the client responds with an error as its not expecting a ticket.
2. When creating the session ticket, if the ticket key cb returns 0
the crypto/hmac contexts are not initialized, and the code crashes when
trying to encrypt the session ticket.
To fix 1, if the ticket TLSEXT is not written out, clear the expected
ticket flag.
To fix 2, consider a return of 0 from the ticket key cb a recoverable
error, and write a 0 length ticket and continue. The client-side code
can explicitly handle this case.
Fix these two cases, and add unit test code to validate ticket behavior.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1098)
This involves providing more session ticket key data, for both the cipher and
the digest
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #515, MR: #2153
Since 50932c4 "PACKETise ServerHello processing",
ssl_next_proto_validate() incorrectly allows empty protocol name.
draft-agl-tls-nextprotoneg-04[1] says "Implementations MUST ensure that
the empty string is not included and that no byte strings are
truncated."
This patch restores the old correct behavior.
[1] https://tools.ietf.org/html/draft-agl-tls-nextprotoneg-04
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Per RFC 5246,
Note: this extension is not meaningful for TLS versions prior to 1.2.
Clients MUST NOT offer it if they are offering prior versions.
However, even if clients do offer it, the rules specified in [TLSEXT]
require servers to ignore extensions they do not understand.
Although second sentence would suggest that there would be no interop
problems in always offering the extension, WebRTC has reported issues
with Bouncy Castle on < TLS 1.2 ClientHellos that still include
signature_algorithms. See also
https://bugs.chromium.org/p/webrtc/issues/detail?id=4223
RT#4390
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Make OBJ_name_cmp internal
Rename idea_xxx to IDEA_xxx
Rename get_rfc_xxx to BN_get_rfc_xxx
Rename v3_addr and v3_asid functions to X509v3_...
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move the dh_st structure into an internal header file and provide
relevant accessors for the internal fields.
Reviewed-by: Richard Levitte <levitte@openssl.org>
* Clear proposed, along with selected, before looking at ClientHello
* Add test case for above
* Clear NPN seen after selecting ALPN on server
* Minor documentation updates
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If a call to EVP_DecryptUpdate fails then a memory leak could occur.
Ensure that the memory is freed appropriately.
Issue reported by Guido Vranken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
* Perform ALPN after the SNI callback; the SSL_CTX may change due to
that processing
* Add flags to indicate that we actually sent ALPN, to properly error
out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Disabled by default, but can be enabled by setting the
ct_validation_callback on a SSL or SSL_CTX.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Change the ECC default curve list to be this, in order: x25519, secp256r1,
secp521r1, secp384r1, brainpoolP256r1, brainpoolP384r1, and brainpool512r1.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
1) Simplify code with better PACKET methods.
2) Make broken SNI parsing explicit. SNI was intended to be extensible
to new name types but RFC 4366 defined the syntax inextensibly, and
OpenSSL has never parsed SNI in a way that would allow adding a new name
type. RFC 6066 fixed the definition but due to broken implementations
being widespread, it appears impossible to ever extend SNI.
3) Annotate resumption behaviour. OpenSSL doesn't currently handle all
extensions correctly upon resumption. Annotate for further clean-up.
4) Send an alert on ALPN protocol mismatch.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Add X25519 to TLS supported curve list.
Reject attempts to configure keys which cannot be used
for signing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Adapted from BoringSSL. Added a test.
The extension parsing code is already attempting to already handle this for
some individual extensions, but it is doing so inconsistently. Duplicate
efforts in individual extension parsing will be cleaned up in a follow-up.
Reviewed-by: Stephen Henson <steve@openssl.org>
Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Certain code paths in tls_decrypt_ticket could return early without first
freeing the HMAC_CTX or the EVP_CIPHER_CTX.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove support for static ECDH ciphersuites. They require ECDH keys
in certificates and don't support forward secrecy.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
To enable heartbeats for DTLS, configure with enable-heartbeats.
Heartbeats for TLS have been completely removed.
This addresses RT 3647
Reviewed-by: Richard Levitte <levitte@openssl.org>
PACKET contents should be read-only. To achieve this, also
- constify two user callbacks
- constify BUF_reverse.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven. Protocol-specific
constraints that influence negotiation are moved into the flags
field of the method structure. The same protocol version constraints
are now applied in all code paths. It is now much easier to add
new protocol versions without reworking the protocol selection
logic.
In the presence of "holes" in the list of enabled client protocols
we no longer select client protocols below the hole based on a
subset of the constraints and then fail shortly after when it is
found that these don't meet the remaining constraints (suiteb, FIPS,
security level, ...). Ideally, with the new min/max controls users
will be less likely to create "holes" in the first place.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
If DSA parameters are absent return -1 (for unknown) in DSA_security_bits.
If parameters are absent when a certificate is set in an SSL/SSL_CTX
structure this will reject the certificate by default. This will cause DSA
certificates which omit parameters to be rejected but that is never (?)
done in practice.
Thanks to Brian 'geeknik' Carpenter for reporting this issue.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Move all calls of the OCSP callback into one place, rather than repeating it
in two different places.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
It makes no sense to call the OCSP status callback if we are resuming a
session because no certificates will be sent.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
If a server sends the status_request extension then it may choose
to send the CertificateStatus message. However this is optional.
We were treating it as mandatory and the connection was failing.
Thanks to BoringSSL for reporting this issue.
RT#4120
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
If the call to OBJ_find_sigid_by_algs fails to find the relevant NID then
we should set the NID to NID_undef.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add new flag TLS1_FLAGS_RECEIVED_EXTMS which is set when the peer sends
the extended master secret extension.
Server now sends extms if and only if the client sent extms.
Check consistency of extms extension when resuming sessions following (where
practical) RFC7627.
Reviewed-by: Matt Caswell <matt@openssl.org>
This change required some special treatment, as HMAC is intertwined
with EVP_MD. For now, all local HMAC_CTX variables MUST be
initialised with HMAC_CTX_EMPTY, or whatever happens to be on the
stack will be mistaken for actual pointers to EVP_MD_CTX. This will
change as soon as HMAC_CTX becomes opaque.
Also, since HMAC_CTX_init() can fail now, its return type changes from
void to int, and it will return 0 on failure, 1 on success.
Reviewed-by: Rich Salz <rsalz@openssl.org>
SSL_{CTX}_set_tmp_ecdh() allows to set 1 EC curve and then tries to use it. On
the other hand SSL_{CTX_}set1_curves() allows you to set a list of curves, but
only when SSL_{CTX_}set_ecdh_auto() was called to turn it on.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This only gets used to set a specific curve without actually checking that the
peer supports it or not and can therefor result in handshake failures that can
be avoided by selecting a different cipher.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Don't hard code EVP_sha* etc for signature algorithms: use table
indices instead. Add SHA224 and SHA512 to tables.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This patch contains the necessary changes to provide GOST 2012
ciphersuites in TLS. It requires the use of an external GOST 2012 engine.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are lots of calls to EVP functions from within libssl There were
various places where we should probably check the return value but don't.
This adds these checks.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This disables some ciphersuites which aren't supported in SSL v3:
specifically PSK ciphersuites which use SHA256 or SHA384 for the MAC.
Thanks to the Open Crypto Audit Project for identifying this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
The function tls1_get_curvelist() has an explicit check to see if s->cert
is NULL or not. However the check appears *after* calling the tls1_suiteb
macro which derefs s->cert. In reality s->cert can never be NULL because
it is created in SSL_new(). If the malloc fails then the SSL_new call fails
and no SSL object is created.
Reviewed-by: Tim Hudson <tjh@openssl.org>
if we have a malloc |x = OPENSSL_malloc(...)| sometimes we check |x|
for NULL and sometimes we treat it as a boolean |if(!x) ...|. Standardise
the approach in libssl.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
This OPENSSL_assert in (d)tls1_hearbeat is trivially always going to be
true because it is testing the sum of values that have been set as
constants just a few lines above and nothing has changed them. Therefore
remove this.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The SSL variable |in_handshake| seems misplaced. It would be better to have
it in the STATEM structure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function ssl_check_for_safari fingerprints the incoming extensions
to see whether it is one of the broken versions of safari. However it was
failing to reset the PACKET back to the same position it started in, hence
causing some extensions to be skipped incorrectly.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Move all packet parsing to the beginning of the method. This limits the
SSLv2 compatibility soup to the parsing, and makes the rest of the
processing uniform.
This is also needed for simpler EMS support: EMS servers need to do an
early scan for EMS to make resumption decisions. This'll be easier when
the entire ClientHello is parsed in the beginning.
As a side effect,
1) PACKETize ssl_get_prev_session and tls1_process_ticket; and
2) Delete dead code for SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG.
Reviewed-by: Matt Caswell <matt@openssl.org>
The bookmark API results in a lot of boilerplate error checking that can
be much more easily achieved with a simple struct copy. It also lays the
path for removing the third PACKET field.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Commit 9ceb2426b0 (PACKETise ClientHello) broke session tickets by failing
to detect the session ticket extension in an incoming ClientHello. This
commit fixes the bug.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Enhance the PACKET code readability, and fix a stale comment. Thanks
to Ben Kaduk (bkaduk@akamai.com) for pointing this out.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
It is valid for an extension block to be present in a ClientHello, but to
be of zero length.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This adds additional checks to the processing of extensions in a ClientHello
to ensure that either no extensions are present, or if they are then they
take up the exact amount of space expected.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Stephen Henson <steve@openssl.org>
The size of the SRP extension can never be negative (the variable
|size| is unsigned). Therefore don't check if it is less than zero.
RT#3862
Reviewed-by: Richard Levitte <levitte@openssl.org>
Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore it is being removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Also reorder preferences to prefer prime curves to binary curves, and P-256 to everything else.
The result:
$ openssl s_server -named_curves "auto"
This command will negotiate an ECDHE ciphersuite with P-256:
$ openssl s_client
This command will negotiate P-384:
$ openssl s_client -curves "P-384"
This command will not negotiate ECDHE because P-224 is disabled with "auto":
$ openssl s_client -curves "P-224"
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Move per-connection state out of the CERT structure: which should just be
for shared configuration data (e.g. certificates to use).
In particular move temporary premaster secret, raw ciphers, peer signature
algorithms and shared signature algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Following the version negotiation rewrite all of the previous code that was
dedicated to version negotiation can now be deleted - all six source files
of it!!
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Remove RFC2712 Kerberos support from libssl. This code and the associated
standard is no longer considered fit-for-purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For the various string-compare routines (strcmp, strcasecmp, str.*cmp)
use "strcmp()==0" instead of "!strcmp()"
Reviewed-by: Tim Hudson <tjh@openssl.org>
Compiling OpenSSL code with MSVC and /W4 results in a number of warnings.
One category of warnings is particularly interesting - C4701 (potentially
uninitialized local variable 'name' used). This warning pretty much means
that there's a code path which results in uninitialized variables being used
or returned. Depending on compiler, its options, OS, values in registers
and/or stack, the results can be nondeterministic. Cases like this are very
hard to debug so it's rational to fix these issues.
This patch contains a set of trivial fixes for all the C4701 warnings (just
initializing variables to 0 or NULL or appropriate error code) to make sure
that deterministic values will be returned from all the execution paths.
RT#3835
Signed-off-by: Matt Caswell <matt@openssl.org>
Matt's note: All of these appear to be bogus warnings, i.e. there isn't
actually a code path where an unitialised variable could be used - its just
that the compiler hasn't been able to figure that out from the logic. So
this commit is just about silencing spurious warnings.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't check for NULL before calling a free routine. This gets X509_.*free:
x509_name_ex_free X509_policy_tree_free X509_VERIFY_PARAM_free
X509_STORE_free X509_STORE_CTX_free X509_PKEY_free
X509_OBJECT_free_contents X509_LOOKUP_free X509_INFO_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
The recent updates to libssl to enforce stricter return code checking, left
a small number of instances behind where return codes were being swallowed
(typically because the function they were being called from was declared as
void). This commit fixes those instances to handle the return codes more
appropriately.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Ensure that all functions have their return values checked where
appropriate. This covers all functions defined and called from within
libssl.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't check that the curve appears in the list of acceptable curves for the
peer, if they didn't send us such a list (RFC 4492 does not require that the
extension be sent).
Reviewed-by: Emilia Käsper <emilia@openssl.org>
If a client renegotiates using an invalid signature algorithms extension
it will crash a server with a NULL pointer dereference.
Thanks to David Ramos of Stanford University for reporting this bug.
CVE-2015-0291
Reviewed-by: Tim Hudson <tjh@openssl.org>
If SSL_check_chain is called with a NULL X509 object or a NULL EVP_PKEY
or the type of the public key is unrecognised then the local variable
|cpk| in tls1_check_chain does not get initialised. Subsequently an
attempt is made to deref it (after the "end" label), and a seg fault will
result.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
I left many "#if 0" lines, usually because I thought we would
probably want to revisit them later, or because they provided
some useful internal documentation tips.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add and retrieve extended master secret extension, setting the flag
SSL_SESS_FLAG_EXTMS appropriately.
Note: this just sets the flag and doesn't include the changes to
master secret generation.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
An expired IETF Internet-Draft (seven years old) that nobody
implements, and probably just as good as NSA DRBG work.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove support for SHA0 and DSS0 (they were broken), and remove
the ability to attempt to build without SHA (it didn't work).
For simplicity, remove the option of not building various SHA algorithms;
you could argue that SHA_224/256/384/512 should be kept, since they're
like crypto algorithms, but I decided to go the other way.
So these options are gone:
GENUINE_DSA OPENSSL_NO_SHA0
OPENSSL_NO_SHA OPENSSL_NO_SHA1
OPENSSL_NO_SHA224 OPENSSL_NO_SHA256
OPENSSL_NO_SHA384 OPENSSL_NO_SHA512
Reviewed-by: Richard Levitte <levitte@openssl.org>
Sometimes it fails to format them very well, and sometimes it corrupts them!
This commit moves some particularly problematic ones.
Reviewed-by: Tim Hudson <tjh@openssl.org>
When parsing ClientHello clear any existing extension state from
SRP login and SRTP profile.
Thanks to Karthikeyan Bhargavan for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
Odd-length lists should be rejected everywhere upon parsing. Nevertheless,
be extra careful and add guards against off-by-one reads.
Also, drive-by replace inexplicable double-negation with an explicit comparison.
Reviewed-by: Matt Caswell <matt@openssl.org>
The Supported Elliptic Curves extension contains a vector of NamedCurves
of 2 bytes each, so the total length must be even. Accepting odd-length
lists was observed to lead to a non-exploitable one-byte out-of-bounds
read in the latest development branches (1.0.2 and master). Released
versions of OpenSSL are not affected.
Thanks to Felix Groebert of the Google Security Team for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
once the ChangeCipherSpec message is received. Previously, the server would
set the flag once at SSL3_ST_SR_CERT_VRFY and again at SSL3_ST_SR_FINISHED.
This would allow a second CCS to arrive and would corrupt the server state.
(Because the first CCS would latch the correct keys and subsequent CCS
messages would have to be encrypted, a MitM attacker cannot exploit this,
though.)
Thanks to Joeri de Ruiter for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
This ensures that it's zeroed even if the SSL object is reused
(as in ssltest.c). It also ensures that it applies to DTLS, too.
Reviewed-by: Matt Caswell <matt@openssl.org>
Don't send or parse any extensions other than RI (which is needed
to handle secure renegotation) for SSLv3.
Reviewed-by: Matt Caswell <matt@openssl.org>
The supported signature algorithms extension needs to be processed before
the certificate to use is decided and before a cipher is selected (as the
set of shared signature algorithms supported may impact the choice).
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 56e8dc542b)
Conflicts:
ssl/ssl.h
ssl/ssl_err.c
CVE-2014-3513
This issue was reported to OpenSSL on 26th September 2014, based on an original
issue and patch developed by the LibreSSL project. Further analysis of the issue
was performed by the OpenSSL team.
The fix was developed by the OpenSSL team.
Reviewed-by: Tim Hudson <tjh@openssl.org>
