An index.txt entry which has an empty Subject name field will cause ca
to crash. Therefore check it when we load it to make sure its not empty.
Fixes#5109
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5114)
Misconfiguration (e.g. an empty policy section in the config file) can
lead to an empty Subject. Since certificates should have unique Subjects
this should not be allowed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5114)
The same kind of failure that has already been observed on the
s_client can sometimes also be observed on s_server, so we need to add
the same kind of 50ms delay as was previously added on s_client.
Ref: git commit cb2e10f257:
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5079)
This was identified for Windows almost two years ago for VC and
msys/mingw. It seems that Cygwin suffers from the same issue, and
since Cygwin doesn't define OPENSSL_SYS_WINDOWS, we need to make a
special case to have a 50ms pause before closing the TLS connection.
Ref: git commit cb2e10f257
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5074)
Many of the sub-commands under apps/ accept cipher or digest arguments like
"-sha256". These are implemented using a catchall flag that runs the result
through opt_md() or opt_cipher(). That means any unrecognized flag, including
typos, gets sent to those two functions, producing confusing error messages like
below:
$ ./apps/openssl req -x590
req: Unrecognized digest x590
req: Use -help for summary.
This change switches these two functions to say "Unrecognized flag X" instead.
The new message deliberately leaves off the "-" from the flag name, because
there are some cases where opt_md() and opt_cipher() are passed a flag value
instead (for instance, openssl ca -md). I think the new message is generic
enough that it can serve both cases with improved clarity.
CLA: trivial
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4972)
The idea is to be able to add extension value lines directly on the
command line instead of through the config file, for example:
openssl req -new -extension 'subjectAltName = DNS:dom.ain, DNS:oth.er' \
-extension 'certificatePolicies = 1.2.3.4'
Fixes#3311
Thank you Jacob Hoffman-Andrews for the inspiration
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4986)
check is already made 10 line above.
clean commented code
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4885)
Generate keys using EVP_CIPHER's key generation routine to support
keys of a specific form.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4842)
Otherwise, any command that relies on ssl modules may fail, because
SSL_add_ssl_module() will be called after the config file has already
been loaded.
Fixes#4788
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4792)
1. the 'ignore -days' warning should not be printed without '-x509'
2. the 'ignore -days' warning should terminate with new-line
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4767)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4846)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4837)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4834)
Add speed tool options to run cipher, digest and rand benchmarks for a
single buffer size specified by -bytes over a time interval specified
by -seconds.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4834)
IFF the client has ChaCha first, and server cipher priority is used,
and the new SSL_OP_PRIORITIZE_CHACHA_FOR_MOBILE option is used,
then reprioritize ChaCha above everything else. This way, A matching
ChaCha cipher will be selected if there is a match. If no ChaCha ciphers
match, then the other ciphers are used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4436)
s_server reported early_data not being sent and early_data being
rejected in the same way, i.e. "No early data received". This is
slightly misleading so this commit provides a different error message
if the early data is rejected.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4738)
* Introduce RSA_generate_multi_prime_key to generate multi-prime
RSA private key. As well as the following functions:
RSA_get_multi_prime_extra_count
RSA_get0_multi_prime_factors
RSA_get0_multi_prime_crt_params
RSA_set0_multi_prime_params
RSA_get_version
* Support EVP operations for multi-prime RSA
* Support ASN.1 operations for multi-prime RSA
* Support multi-prime check in RSA_check_key_ex
* Support multi-prime RSA in apps/genrsa and apps/speed
* Support multi-prime RSA manipulation functions
* Test cases and documentation are added
* CHANGES is updated
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4241)
EVP_PKEY_public_check() and EVP_PKEY_param_check()
Doc and test cases are added
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4647)
It's argued that /WX allows to keep better focus on new code, which
motivates its comeback...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)
Around 138 distinct errors found and fixed; thanks!
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)
We were using OPENSSL_strdup() unnecessarily and then failing to free it. There is
no reason to use OPENSSL_strdup() in this scenario - so just remove it.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4699)
The Chinese cryptographic operations should appear in the disabled list if they
are disabled.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4678)
In OpenSSL pre 1.1.0, 'openssl x509 -CAkeyformat engine' was possible
and supported. In 1.1.0, a small typo ('F' instead of 'f') removed
that possibility. This restores the pre 1.1.0 behavior.
Fixes#4366
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4643)
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
Few code format fixup
Fix limit computation; was too strict by 2 bytes.
Simplify computation of buffer limits
Checking is strictly same as sizeof(".pem") == 5
Simplify loop of code for certificate filename creation
Fix MAX_PATH usage
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1936)
And also make '-xmpphost' an alias of the '-name' option.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4524)
Names were not removed.
Some comments were updated.
Replace Andy's address with openssl.org
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4516)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4481)
CCM does not support streaming: An additional call to (EVP_...)Update must
precede each call to Update to pass the total message length. The generic
Update_loop calls Update one time such that in case of CCM only the total
message length is passed. No encryption/decryption measured.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4480)
Rewrite the -req-nodes flag from CA.pl (idea from Andy)
Rewrite ERR_string_error_n
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4478)
Avoid duplicate assertion by removing dhparam from SSL_CONF parameter list:
dhparam is handled manually by s_server.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4408)
A new method is added to EVP_PKEY_METH as:
int (*check) (EVP_PKEY_CTX *ctx);
and to EVP_PKEY_ASN1_METHOD as:
int (*pkey_check) (EVP_PKEY_CTX *ctx);
This is used to check the validity of a specific key.
The order of calls is:
EVP_PKEY_check -> pmeth.check -> ameth.pkey_check.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4337)
Simply put, any NAME type OSS_STORE_INTO is a new object that can be
looked into, and potentially lead to a whole tree of data to dive
into. The recursive option allows someone to view the whole tree and
its data in one go.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4336)
If an alert gets sent and then we close the connection immediately with
data still in the input buffer then a TCP-RST gets sent. Some OSs
immediately abandon data in their input buffer if a TCP-RST is received -
meaning the alert data itself gets ditched. Sending a TCP-FIN before the
TCP-RST seems to avoid this.
This was causing test failures in MSYS2 builds.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4333)
Move struct timeval includes into e_os.h (where the Windows ones were).
Enaure that the include is guarded canonically.
Refer #4271
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4312)
If we have not decided on an SNI value yet, but we are attempting to reuse
a session, and SNI is set in that, then we should use that value by
default.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3926)
cryptilib.h is the second.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
Removed e_os.h from all bar three headers (apps/apps.h crypto/bio/bio_lcl.h and
ssl/ssl_locl.h).
Added e_os.h into the files that need it now.
Directly reference internal/nelem.h when required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
This mimics the behaviour of DES_crypt, where the salt and password
are expected to be in EBCDIC when CHARSET_EBCDIC is defined, and are
converted internally to ASCII. This is also done with the magic ID
string if it's not already ASCII. The resulting output is entirely
built up of ASCII components and is converted back to EBCDIC at the
end.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4229)
Remove GETPID_IS_MEANINGLESS and osslargused.
Move socket-related things to new file internal/sockets.h; this is now
only needed by four(!!!) files. Compiles should be a bit faster.
Remove USE_SOCKETS ifdef's
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4209)
Add -rand_serial to CA command and "serial_rand" config option.
Up RAND_BITS to 159, and comment why: now confirms to CABForum
guidelines (Ballot 164) as well as IETF RFC 5280 (PKIX).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4185)
Remove the exit_main function which is never used.
Remove the exit_options array which is also unreferenced.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4213)
Cast arguments to the various ctype functions to unsigned char to match their
documentation.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4203)
Write missing prime.pod and srp.pod
Implement -c in find-doc-nits (for command options)
Other fixes to some manpages
Use B<-I<digest|cipher>> notation
Split up multiple flags into a single entry in the synopsis.
Add -1 and missing-help to list command.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4144)
This fixes issue #3043, which ultimately was reported because
documentation was not clear on the meaning of the "-ignore_err" option.
Update both command line documentation and add this option to manpage.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4143)
In the generated HTML document, the `<pre>` tag is not closed. This patch also has a trivial code-style improvement, unrelated to the bug fix.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4088)
Building without the scrypt KDF is now possible, the OPENSSL_NO_SCRYPT
define is honored in code. Previous this lead to undefined references.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4116)
Give each SSL object it's own DRBG, chained to the parent global
DRBG which is used only as a source of randomness into the per-SSL
DRBG. This is used for all session, ticket, and pre-master secret keys.
It is NOT used for ECDH key generation which use only the global
DRBG. (Doing that without changing the API is tricky, if not impossible.)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4050)
If RAND_add wraps around, XOR with existing. Add test to drbgtest that
does the wrap-around.
Re-order seeding and stop after first success.
Add RAND_poll_ex()
Use the DF and therefore lower RANDOMNESS_NEEDED. Also, for child DRBG's,
mix in the address as the personalization bits.
Centralize the entropy callbacks, from drbg_lib to rand_lib.
(Conceptually, entropy is part of the enclosing application.)
Thanks to Dr. Matthias St Pierre for the suggestion.
Various code cleanups:
-Make state an enum; inline RANDerr calls.
-Add RAND_POLL_RETRIES (thanks Pauli for the idea)
-Remove most RAND_seed calls from rest of library
-Rename DRBG_CTX to RAND_DRBG, etc.
-Move some code from drbg_lib to drbg_rand; drbg_lib is now only the
implementation of NIST DRBG.
-Remove blocklength
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4019)
This is to address issue #3932. Support comma-separated string
to specify what extensions to be displayed.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4016)
Remove redundant variable
[to be squashed]
I think it's better to use `GetFileAttributes` to obtain the attributes
of a file than `FindFirstFile`. If the input name contains `*`, this
function should return failure rather than check whether the first match
happens to be a file or a directory.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3991)
original problem: if a private key is invaild, nothing outputted.
the error filter in apps/rsa.c is not working any more.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4043)
Print the parameters for scrypt PBKDF when used in PKCS#12 files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1334)
The info printing for PBES2 already uses space after type and commas to
separate items in the line so use the same format for MAC info too.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1334)
report additional information about the MAC used over the
PKCS#12 structure: size of mac and salt as well as the
hash algorithm used for creating it
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1334)
since when we get to this point, other information was already
printed, we should insert some whitespace between already
printed data and this "unsupported parameters" error message
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1334)
In function wait_for_async(), allocated async fds is freed if
`SSL_get_all_async_fds` fails, but later `fds` is used. Interestingly,
it is not freed when everything succeeds.
Rewrite the FD set loop to make it more readable and to not modify the allocated
pointer so it can be freed.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3992)
`args_verify()` and `opt_reset()` are declared in `apps/apps.h`, but they are
not referenced anywhere. So can we remove them from `apps.h`?
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3995)
Add a new config param to specify how the CSPRNG should be seeded.
Illegal values or nonsensical combinations (e.g., anything other
than "os" on VMS or HP VOS etc) result in build failures.
Add RDSEED support.
Add RDTSC but leave it disabled for now pending more investigation.
Refactor and reorganization all seeding files (rand_unix/win/vms) so
that they are simpler.
Only require 128 bits of seeding material.
Many document improvements, including why to not use RAND_add() and the
limitations around using load_file/write_file.
Document RAND_poll().
Cleanup Windows RAND_poll and return correct status
More completely initialize the default DRBG.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3965)
Fixes: issue #3747
make SSL_CIPHER_standard_name globally available and introduce a new
function OPENSSL_cipher_name.
A new option '-convert' is also added to 'openssl ciphers' app.
Documentation and test cases are added.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3859)
Standardized the -rand flag and added a new one:
-rand file...
Always reads the specified files
-writerand file
Always writes to the file on exit
For apps that use a config file, the RANDFILE config parameter reads
the file at startup (to seed the RNG) and write to it on exit if
the -writerand flag isn't used.
Ensured that every app that took -rand also took -writerand, and
made sure all of that agreed with all the documentation.
Fix error reporting in write_file and -rand
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3862)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3925)
This resolves the retry issue in general, but also the specific case where a TLS 1.3 server sends a post-handshake NewSessionTicket message prior to appdata.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3925)
Add the -preserve_dates dates option to preserve dates when signing
a certificate.
Prevent -days and -preserve_dates being used simultaneously
Fixes#946
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/946)
If the hostname is provided as a positional arg then s_client crashes.
The crash occurs as s_client exits (after either a successful or
unsuccessful connection attempt).
This issue was introduced by commit 729ef85611.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3881)
We were not freeing the session created when loading a PSK session file.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3855)
This includes strcat, strcpy and sprintf.
In the x509 app, the code has been cleaned up as well.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3868)
It won't overflow the buffer and will allocate new buffers sufficiently large to
hold new strings longer than the expansion factor.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3847)
Clean up some of the formatting "return x" instead of "return (x)" mostly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3848)
[extended tests]
Original text:
Use BUF_strlcpy() instead of strcpy().
Use BUF_strlcat() instead of strcat().
Use BIO_snprintf() instead of sprintf().
In some cases, keep better track of buffer lengths.
This is part of a large change submitted by Markus Friedl <markus@openbsd.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3701)
And BN_pseudo_rand_range is really BN_rand_range.
Document that we might deprecate those functions.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3743)
Instead, make it possible to disable the console reader that's part of
the UI module. This makes it possible to use the UI API and other UI
methods in environments where the console reader isn't useful.
To disable the console reader, configure with 'no-ui-console' /
'disable-ui-console'.
'no-ui' / 'disable-ui' is now an alias for 'no-ui-console' /
'disable-ui-console'.
Fixes#3806
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3820)
Remove some incorrect copyright references.
Move copyright to standard place
Add OpenSSL copyright where missing.
Remove copyrighted file that we don't use any more
Remove Itanium assembler for RC4 and MD5 (assembler versions of old and
weak algorithms for an old chip)
Standardize apps/rehash copyright comment; approved by Timo
Put dual-copyright notice on mkcert
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3691)
The packet parsing code for the server version string was incrementing
the array index twice on every iteration. This meant that strings with
an even number of characters would pass, but strings with an odd number
(ex: 5.7.18-0ubuntu0.16.04.1) would cause the pos variable to get out
of sync.
This would cause a later failure with "MySQL packet is broken."
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3799)
Sometimes, 'file_load' couldn't really distinguish if a file handler
matched the data and produced an error or if it didn't match the data
at all.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3542)
This command can be used to view the contents of any supported type of
information fetched from a URI, and output them in PEM format.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3542)
BIO_sock_init returns '-1' on error, not '0', so it's needed to check
explicitly istead of using '!'.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3766)
This function is undocumented, but similarly named functions (such as
'curl_global_cleanup') are documented as internals that should not be
called by scripts.
Fixes#3765
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3768)
Ensure that we properly distinguish between successful return (PSK
provided), successful return (no PSK provided) and failure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)
for opt_long(opt_int)/opt_ulong/opt_imax/opt_umax
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3653)
This allows the user to provide the target host and optional port to
openssl s_client as an optional positional argument, rather than as the
argument to the -connect flag. This rationalises the user experience of
s_client: given that the only logical purpose of s_client is to connect
to a host, it is difficult to understand why there is an (effectively
mandatory) command option to pass to make that happen.
This patch forbids providing *both* -connect and the positional
argument, because it would likely be too difficult to reconcile.
Otherwise, using the positional argument behaves exactly the same as
using -connect does.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1171)
This applies both to s_client and s_server app.
Reaction to Issue #3665.
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3697)
Because apps/progs.h isn't configuration agnostic, it's not at all
suited for 'make update' or being versioned, so change it to be
dynamically generated.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3688)
Update s_client -help and pod file.
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3654)
Mostly braces and NULL pointer check and also copyright year bump
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3657)
To reduce duplicate code
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3656)
Make funcs to deal with non-null-term'd string
in both asn1_generalizedtime_to_tm() and asn1_utctime_to_tm().
Fixes issue #3444.
This one is used to enforce strict format (RFC 5280) check and to
convert GeneralizedTime to UTCTime.
apps/ca has been changed to use the new API.
Test cases and documentation are updated/added
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3566)
Check return value of NETSCAPE_SPKI_new() and
NETSCAPE_SPKI_b64_encode(), and also clean up coding style incidentally.
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3647)
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3622)
a buffer returned from BIO_gets is not checked for it's length before
reading its contents.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3630)
s_server has traditionally been very brittle in PSK mode. If the
client offered any PSK identity other than "Client_identity" s_server
would simply abort.
This is breakage for breakage's sake, and unlike most other parts of
s_server, which tend to allow more flexible connections.
This change accomplishes two things:
* when the client's psk_identity does *not* match the identity
expected by the server, just warn, don't fail.
* allow the server to expect instead a different psk_identity from
the client besides "Client_identity"
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3605)
Reformat some indents and braces based on OpenSSL coding style spec.
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3586)
The password_callback() function does not necessarily NULL terminate
the password buffer, the caller must use the returned length but the
srp app uses this function as if it was doing NULL termination.
This made the -passin and -passout options of "openssl srp"
fail inexpicably and randomly or even crash.
Fixed by enlarging the buffer by one, so that the maximum password length
remains unchanged, and adding NULL termination upon return.
[Rearrange code for coding style compliance in process.]
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3475)
With the -list option the srp app loops on the main while() endlessly,
whether users were given on the command line or not. The loop should
be stopped when in list mode and there are no more users.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3489)
- Mostly missing fall thru comments
- And uninitialized value used in sslapitest.c
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3440)
Allow conversion of existing requests to certificates again.
Fixes the issue #3396
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3437)
Commit c4666bfa changed s_server so that it asked libssl rather than the
underlying socket whether an error is retryable or not on the basis that
libssl has more information. That is true unfortunately the method used
was wrong - it only checks libssl's own internal state rather than both
libssl and the BIO. Should use SSL_get_error() instead.
This issue can cause an infinite loop because some errors could appear as
retryable when in fact they are not.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3317)
Add padding callback for application control
Standard block_size callback
Documentation and tests included
Configuration file/s_client/s_srver option
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3130)
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3141)
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3141)
Enforcement of an SNI extension in the initial ClientHello is becoming
increasingly common (e.g. see GitHub issue #2580). This commit changes
s_client so that it adds SNI be default, unless explicitly told not to via
the new "-noservername" option.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2614)
The CA names should be printed according to user's decision
print_name instead of set of BIO_printf
dump_cert_text instead of set of BIO_printf
Testing cyrillic output of X509_CRL_print_ex
Write and use X509_CRL_print_ex
Reduce usage of X509_NAME_online
Using X509_REQ_print_ex instead of X509_REQ_print
Fix nameopt processing.
Make dump_cert_text nameopt-friendly
Move nameopt getter/setter to apps/apps.c
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3262)
s_server was asking the underlying socket if it is a retryable error rather
than libssl which has more information.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
RT3877: Add X509 OCSP error codes and messages
Add additional OCSP error codes for X509 verify usage
RT3867: Support Multiple CA certs in ocsp app
Add the ability to read multiple CA certs from a single file in the
ocsp app.
Update some missing X509 errors in documentation.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/941)
dhparams correctly handles X9.42 params in PEM format. However it failed
to correctly processes them when reading/writing DER format.
Fixes#3102
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3111)
s_client was always saying that early_data was rejected even when it was
accepted. This was because it was using the wrong test to detect the end
of the handshake. It was using SSL_in_init() which only tells you whether
it is currently processing/sending/expecting handshake messages. It should
use SSL_is_init_finished() which tells you that no handshake messages are
being processed/sent/expected AND we have completed the handshake. In the
early data case we are not processing/sending handshake messages and we
are expecting early data (not a handshake message) - but the handshake has
not yet completed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3090)
Fix some comments too
[skip ci]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3069)
Even though C standard defines 'z' modifier, recent mingw compilers break
the contract by defining __STDC_VERSION__ with non-compliant MSVCRT.DLL.
In other words we can't use %zu with mingw, but insteadl of cooking
Reviewed-by: Tim Hudson <tjh@openssl.org>
Commits f2ff1432f in master and 14d4d7eda in 1.1.0 broke the no-dtls build
by moving the position of a "#endif" for OPENSSL_NO_DTLS in a change
which is otherwise unrelated to DTLS. This puts it back to where it was.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2974)
clean an useless static qualifier and a dead comment.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2278)
This amounts to moving the column counter so it isn't a function local static variable and reinitialising it each time.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2884)
process. This means no AEAD ciphers and no XTS mode.
Update the test script that uses this output to test cipher suites to not
filter out the now missing cipher modes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2876)
This is for consistency with the rest of the API where all the functions
are called *early_data*.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
This is for consistency with the rest of the API where all the functions
are called *early_data*.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
Based on initial patch by Alex Bergmann <alex@linlab.net> and new function
ldap_ExtendedResponse_parse() by Andy Polyakov <appro@openssl.org>. Thanks
very much to both.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2293)
This removes the fips configure option. This option is broken as the
required FIPS code is not available.
FIPS_mode() and FIPS_mode_set() are retained for compatibility, but
FIPS_mode() always returns 0, and FIPS_mode_set() can only be used to
turn FIPS mode off.
Reviewed-by: Stephen Henson <steve@openssl.org>
The library files are built with symbol names as is, while the
application is built with the default uppercase-all-symbols mode.
That's fine for public APIs, because we have __DECC_INCLUDE_PROLOGUE.H
and __DECC_INCLUDE_EPILOGUE.H automatically telling the compiler how
to treat the public header files. However, we don't have the same
setup for internal library APIs, since they are usually only used by
the libraries.
Because apps/rehash.c uses a library internal header file, we have to
surround that inclusion with the same kind of pragmas found in
__DECC_INCLUDE_PROLOGUE.H and __DECC_INCLUDE_EPILOGUE.H, or we get
unresolved symbols when building no-shared.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2725)
The generation number is ';nnn' at the end of the file name fetched
with readdir(). Because rehash checks for specific extensions and
doesn't expect an additional generation number, the easiest is to
massage the received file name early by simply removing the generation
number.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2717)
A spelling error prevented it from building correctly.
Furthermore, we need to be more careful when to add a / at the end
of the dirname and when not.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2706)
This makes it a little easier to create a pre-certificate.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/843)
This implementation is written in endian agnostic C code. No attempt
at providing machine specific assembly code has been made. This
implementation expands the evptests by including the test cases from
RFC 5794 and ARIA official site rather than providing an individual
test case. Support for ARIA has been integrated into the command line
applications, but not TLS. Implemented modes are CBC, CFB1, CFB8,
CFB128, CTR, ECB and OFB128.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2337)
It makes possible to print the certificate's DN correctly in case of verification errors.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2656)
