We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in. This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.
This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 0f539dc1a2)
Conflicts:
Makefile.org
apps/Makefile
test/Makefile
If a client receives a bad hello request in DTLS then the alert is not
sent correctly.
RT#2801
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 4dc1aa0436)
40 bit ciphers are limited to 512 bit RSA, 56 bit ciphers to 1024 bit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit ac38115c1a)
Since the client has no way of communicating her supported parameter
range to the server, connections to servers that choose weak DH will
simply fail.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Currently we set change_cipher_spec_ok to 1 before calling
ssl3_get_cert_verify(). This is because this message is optional and if it
is not sent then the next thing we would expect to get is the CCS. However,
although it is optional, we do actually know whether we should be receiving
one in advance. If we have received a client cert then we should expect
a CertificateVerify message. By the time we get to this point we will
already have bombed out if we didn't get a Certificate when we should have
done, so it is safe just to check whether |peer| is NULL or not. If it is
we won't get a CertificateVerify, otherwise we will. Therefore we should
change the logic so that we only attempt to get the CertificateVerify if
we are expecting one, and not allow a CCS in this scenario.
Whilst this is good practice for TLS it is even more important for DTLS.
In DTLS messages can be lost. Therefore we may be in a situation where a
CertificateVerify message does not arrive even though one was sent. In that
case the next message the server will receive will be the CCS. This could
also happen if messages get re-ordered in-flight. In DTLS if
|change_cipher_spec_ok| is not set and a CCS is received it is ignored.
However if |change_cipher_spec_ok| *is* set then a CCS arrival will
immediately move the server into the next epoch. Any messages arriving for
the previous epoch will be ignored. This means that, in this scenario, the
handshake can never complete. The client will attempt to retransmit
missing messages, but the server will ignore them because they are the wrong
epoch. The server meanwhile will still be waiting for the CertificateVerify
which is never going to arrive.
RT#2958
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit a0bd649336)
If sk_SSL_CIPHER_new_null() returns NULL then ssl_bytes_to_cipher_list()
should also return NULL.
Based on an original patch by mrpre <mrpre@163.com>.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 14def5f537)
Ensure all fatal errors transition into the new error state for DTLS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cefc93910c)
Conflicts:
ssl/d1_srvr.c
Conflicts:
ssl/d1_srvr.c
Ensure all fatal errors transition into the new error state on the client
side.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cc273a9361)
Conflicts:
ssl/s3_clnt.c
Conflicts:
ssl/s3_clnt.c
Ensure all fatal errors transition into the new error state on the server
side.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cf9b0b6fb2)
Conflicts:
ssl/s3_srvr.c
Reusing an SSL object when it has encountered a fatal error can
have bad consequences. This is a bug in application code not libssl
but libssl should be more forgiving and not crash.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit a89db885e0)
Conflicts:
ssl/s3_srvr.c
ssl/ssl_stat.c
Sanity check the |len| parameter to ensure it is positive. Thanks to Kevin
Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3 Solutions) for
reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit cb0f400b0c)
The return value is checked for 0. This is currently safe but we should
really check for <= 0 since -1 is frequently used for error conditions.
Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit c427570e50)
Conflicts:
ssl/ssl_locl.h
Conflicts:
ssl/ssl_locl.h
For SSLv3 the code assumes that |header_length| > |md_block_size|. Whilst
this is true for all SSLv3 ciphersuites, this fact is far from obvious by
looking at the code. If this were not the case then an integer overflow
would occur, leading to a subsequent buffer overflow. Therefore I have
added an explicit sanity check to ensure header_length is always valid.
Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 29b0a15a48)
The various implementations of EVP_CTRL_AEAD_TLS_AAD expect a buffer of at
least 13 bytes long. Add sanity checks to ensure that the length is at
least that. Also add a new constant (EVP_AEAD_TLS1_AAD_LEN) to evp.h to
represent this length. Thanks to Kevin Wojtysiak (Int3 Solutions) and
Paramjot Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit c826988109)
Conflicts:
ssl/record/ssl3_record.c
Conflicts:
apps/speed.c
crypto/evp/e_aes_cbc_hmac_sha256.c
crypto/evp/evp.h
Fortify flagged up a problem in n_do_ssl_write() in SSLv2. Analysing the
code I do not believe there is a real problem here. However the logic flows
are complicated enough that a sanity check of |len| is probably worthwhile.
Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit c5f8cd7bc6)
EAP-FAST session resumption relies on handshake message lookahead
to determine server intentions. Commits
980bc1ec61
and
7b3ba508af
removed the lookahead so broke session resumption.
This change partially reverts the commits and brings the lookahead back
in reduced capacity for TLS + EAP-FAST only. Since EAP-FAST does not
support regular session tickets, the lookahead now only checks for a
Finished message.
Regular handshakes are unaffected by this change.
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 6e3d015363)
A 0-length ciphers list is never permitted. The old code only used to
reject an empty ciphers list for connections with a session ID. It
would later error out on a NULL structure, so this change just moves
the alert closer to the problem source.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 3ae91cfb32)
If OpenSSL is configured with no-tlsext then ssl_get_prev_session can read
past the end of the ClientHello message if the session_id length in the
ClientHello is invalid. This should not cause any security issues since the
underlying buffer is 16k in size. It should never be possible to overrun by
that many bytes.
This is probably made redundant by the previous commit - but you can never be
too careful.
With thanks to Qinghao Tang for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 5e0a80c1c9)
The ClientHello processing is insufficiently rigorous in its checks to make
sure that we don't read past the end of the message. This does not have
security implications due to the size of the underlying buffer - but still
needs to be fixed.
With thanks to Qinghao Tang for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit c9642eb1ff79a30e2c7632ef8267cc34cc2b0d79)
There is no indication that the timing differences are exploitable in
OpenSSL, and indeed there is some indication (Usenix '14) that they
are too small to be exploitable. Nevertheless, be careful and apply
the same countermeasures as in s3_srvr.c
Thanks to Nimrod Aviram, Sebastian Schinzel and Yuval Shavitt for
reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit ae50d82700)
Ensure all calls to RAND_bytes and RAND_pseudo_bytes have their return
value checked correctly
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 8f8e4e4f52)
Conflicts:
crypto/evp/e_des3.c
The certificate already contains the DH parameters in that case.
ssl3_send_server_key_exchange() would fail in that case anyway.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 93f1c13619)
Fix some unsigned/signed warnings introduced as part of the fix
for CVE-2015-0293
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This assert is reachable for servers that support SSLv2 and export ciphers.
Therefore, such servers can be DoSed by sending a specially crafted
SSLv2 CLIENT-MASTER-KEY.
Also fix s2_srvr.c to error out early if the key lengths are malformed.
These lengths are sent unencrypted, so this does not introduce an oracle.
CVE-2015-0293
This issue was discovered by Sean Burford (Google) and Emilia Käsper of
the OpenSSL development team.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
The function tls1_PRF counts the number of digests in use and partitions
security evenly between them. There always needs to be at least one digest
in use, otherwise this is an internal error. Add a sanity check for this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 668f6f08c6)
Cleanse various intermediate buffers used by the PRF (backported version
from master).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 35fafc4dbc)
Conflicts:
ssl/s3_enc.c
Ensure all malloc failures return -1.
Reported by Adam Langley (Google).
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 06c6a2b4a3)
They are moved to the COMPLEMENTOFDEFAULT instead.
This also fixes SSLv2 to be part of COMPLEMENTOFDEFAULT.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f417997a32)
Conflicts:
ssl/ssl_ciph.c
This patch uses warning/fatal constants instead of numbers with comments for
warning/alerts in d1_pkt.c and s3_pkt.c
RT#3725
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit fd865cadcb)
Some Cisco appliances use a pre-standard version number for DTLS. We support
this as DTLS1_BAD_VER within the code.
This change fixes d2i_SSL_SESSION for that DTLS version.
Based on an original patch by David Woodhouse <dwmw2@infradead.org>
RT#3704
Reviewed-by: Tim Hudson <tjh@openssl.org>
Conflicts:
ssl/ssl_asn1.c
Conflicts:
ssl/dtls1.h
Fixed various missing return value checks in ssl3_send_newsession_ticket.
Also a mem leak on error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Conflicts:
ssl/s3_srvr.c
Conflicts:
ssl/s3_srvr.c
This should be a one off operation (subsequent invokation of the
script should not move them)
This commit is for the 1.0.1 changes
Reviewed-by: Tim Hudson <tjh@openssl.org>
Sometimes it fails to format them very well, and sometimes it corrupts them!
This commit moves some particularly problematic ones.
Conflicts:
crypto/bn/bn.h
crypto/ec/ec_lcl.h
crypto/rsa/rsa.h
demos/engines/ibmca/hw_ibmca.c
ssl/ssl.h
ssl/ssl3.h
Conflicts:
crypto/ec/ec_lcl.h
ssl/tls1.h
Reviewed-by: Tim Hudson <tjh@openssl.org>
indent will not alter them when reformatting comments
(cherry picked from commit 1d97c84351)
Conflicts:
crypto/bn/bn_lcl.h
crypto/bn/bn_prime.c
crypto/engine/eng_all.c
crypto/rc4/rc4_utl.c
crypto/sha/sha.h
ssl/kssl.c
ssl/t1_lib.c
Conflicts:
crypto/rc4/rc4_enc.c
crypto/x509v3/v3_scts.c
crypto/x509v3/v3nametest.c
ssl/d1_both.c
ssl/s3_srvr.c
ssl/ssl.h
ssl/ssl_locl.h
ssl/ssltest.c
ssl/t1_lib.c
Reviewed-by: Tim Hudson <tjh@openssl.org>
ssl3_setup_buffers or pqueue_insert fail. The former will fail if there is a
malloc failure, whilst the latter will fail if attempting to add a duplicate
record to the queue. This should never happen because duplicate records should
be detected and dropped before any attempt to add them to the queue.
Unfortunately records that arrive that are for the next epoch are not being
recorded correctly, and therefore replays are not being detected.
Additionally, these "should not happen" failures that can occur in
dtls1_buffer_record are not being treated as fatal and therefore an attacker
could exploit this by sending repeated replay records for the next epoch,
eventually causing a DoS through memory exhaustion.
Thanks to Chris Mueller for reporting this issue and providing initial
analysis and a patch. Further analysis and the final patch was performed by
Matt Caswell from the OpenSSL development team.
CVE-2015-0206
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
Fix to prevent use of DH client certificates without sending
certificate verify message.
If we've used a client certificate to generate the premaster secret
ssl3_get_client_key_exchange returns 2 and ssl3_get_cert_verify is
never called.
We can only skip the certificate verify message in
ssl3_get_cert_verify if the client didn't send a certificate.
Thanks to Karthikeyan Bhargavan for reporting this issue.
CVE-2015-0205
Reviewed-by: Matt Caswell <matt@openssl.org>
of the crash due to p being NULL. Steve's fix prevents this situation from
occuring - however this is by no means obvious by looking at the code for
dtls1_get_record. This fix just makes things look a bit more sane.
Reviewed-by: Dr Steve Henson <steve@openssl.org>
OpenSSL clients would tolerate temporary RSA keys in non-export
ciphersuites. It also had an option SSL_OP_EPHEMERAL_RSA which
enabled this server side. Remove both options as they are a
protocol violation.
Thanks to Karthikeyan Bhargavan for reporting this issue.
(CVE-2015-0204)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 4b4c1fcc88)
Conflicts:
doc/ssl/SSL_CTX_set_options.pod
Fix bug where an OpenSSL client would accept a handshake using an
ephemeral ECDH ciphersuites with the server key exchange message omitted.
Thanks to Karthikeyan Bhargavan for reporting this issue.
CVE-2014-3572
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit b15f876964)
When parsing ClientHello clear any existing extension state from
SRP login and SRTP profile.
Thanks to Karthikeyan Bhargavan for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 47606dda67)
Conflicts:
ssl/t1_lib.c
From BoringSSL
- Send an alert when the client key exchange isn't correctly formatted.
- Reject overly short RSA ciphertexts to avoid a (benign) out-of-bounds memory access.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 4aecfd4d9f)
The Supported Elliptic Curves extension contains a vector of NamedCurves
of 2 bytes each, so the total length must be even. Accepting odd-length
lists was observed to lead to a non-exploitable one-byte out-of-bounds
read in the latest development branches (1.0.2 and master). Released
versions of OpenSSL are not affected.
Thanks to Felix Groebert of the Google Security Team for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 33d5ba8629)
we will support then dtls1_do_write can go into an infinite loop. This commit
fixes that.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit d3d9eef316)
at least the minimum or it will fail.
There were some instances in dtls1_query_mtu where the final mtu can end up
being less than the minimum, i.e. where the user has set an mtu manually. This
shouldn't be allowed. Also remove dtls1_guess_mtu that, despite having
logic for guessing an mtu, was actually only ever used to work out the minimum
mtu to use.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 1620a2e49c)
and instead use the value provided by the underlying BIO. Also provide some
new DTLS_CTRLs so that the library user can set the mtu without needing to
know this constant. These new DTLS_CTRLs provide the capability to set the
link level mtu to be used (i.e. including this IP/UDP overhead). The previous
DTLS_CTRLs required the library user to subtract this overhead first.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 59669b6abf)
Conflicts:
ssl/d1_both.c
ssl/ssl_lib.c
mtu that we have received is not less than the minimum. If its less it uses the
minimum instead. The second call to query the mtu does not do that, but
instead uses whatever comes back. We have seen an instance in RT#3592 where we
have got an unreasonably small mtu come back. This commit makes both query
checks consistent.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 6abb0d1f8e)
automatically updated, and we should use the one provided instead.
Unfortunately there are a couple of locations where this is not respected.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 001235778a)
RT#3592 provides an instance where the OPENSSL_assert that this commit
replaces can be hit. I was able to recreate this issue by forcing the
underlying BIO to misbehave and come back with very small mtu values. This
happens the second time around the while loop after we have detected that the
MTU has been exceeded following the call to dtls1_write_bytes.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit cf75017bfd)
Previously, state variant was not advanced, which resulted in state
being stuck in the st1 variant (usually "_A").
This broke certificate callback retry logic when accepting connections
that were using SSLv2 ClientHello (hence reusing the message), because
their state never advanced to SSL3_ST_SR_CLNT_HELLO_C variant required
for the retry code path.
Reported by Yichun Zhang (agentzh).
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
the session's version (server).
See also BoringSSL's commit bdf5e72f50e25f0e45e825c156168766d8442dde.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit 9e189b9dc1)
once the ChangeCipherSpec message is received. Previously, the server would
set the flag once at SSL3_ST_SR_CERT_VRFY and again at SSL3_ST_SR_FINISHED.
This would allow a second CCS to arrive and would corrupt the server state.
(Because the first CCS would latch the correct keys and subsequent CCS
messages would have to be encrypted, a MitM attacker cannot exploit this,
though.)
Thanks to Joeri de Ruiter for reporting this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit e94a6c0ede)
Conflicts:
CHANGES
ssl/s3_srvr.c
The server must send a NewSessionTicket message if it advertised one
in the ServerHello, so make a missing ticket message an alert
in the client.
An equivalent change was independently made in BoringSSL, see commit
6444287806d801b9a45baf1f6f02a0e3a16e144c.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit de2c7504eb)
Conflicts:
CHANGES
The client sends a session ID with the session ticket, and uses
the returned ID to detect resumption, so we do not need to peek
at handshake messages: s->hit tells us explicitly if we're resuming.
An equivalent change was independently made in BoringSSL, see commit
407886f589cf2dbaed82db0a44173036c3bc3317.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 980bc1ec61)
Conflicts:
ssl/d1_clnt.c
ssl/s3_clnt.c
The same change was independently made in BoringSSL, see commit
9eaeef81fa2d4fd6246dc02b6203fa936a5eaf67
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 7b3ba508af)
This ensures that it's zeroed even if the SSL object is reused
(as in ssltest.c). It also ensures that it applies to DTLS, too.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit a06cd5d056)
